A Possible Way for the Detection and Identification of Dangerous Substances in Ternary Mixtures Using THz Pulsed Spectroscopy

Laser Desorption of Explosives from the Surface of Different Real-World Materials Studied Using C2Cl6-Dopant-Assisted Ion Mobility Spectrometry

A highly efficient and sensitive ion mobility spectrometry (IMS) system with laser desorption sampling was applied for rapid explosive detection using different surface materials. This portable IMS detector, powered by a battery, offers mobility and is suitable for use in the field or combat zones. The laser desorption (LD) sampling of common explosives (Trinitrotoluene-TNT; Dinitrotoluenes-DNTs; Hexogene-RDX; pentaerythritol tetranitrate-PETN; plastic explosives-Compound 4 (C-4) and Semtex) on a wide range of common surface materials, such as metal, ceramic, plastic, glass, drywall, paper, wood, and textiles, was studied. Successful detection was achieved on nearly all surfaces except flammable materials (paper, wood, and textiles). The limit of detection (LOD) was determined for each explosive and specific surface, demonstrating an impressive LOD of 7 ng/mm2 for TNT. RDX, C-4, PETN, and Semtex achieved LOD values of 15 ng/mm2, while DNTs showed an LOD of approximately 50 ng/mm2.

Terahertz spectroscopy of citrate Salts: Effects of crystalline state and crystallization water

Citrate salts are widely used as food additives and medicines for health and treatment. Accurate and fast detection of citrate salts is most important in food industry and medicine health. In this work, terahertz (THz) time-domain spectroscopy was used to detect and analyze different citrate salts and differentiate their crystalline hydrates. Effects of the crystalline state, the crystallization water and the metal cation on the THz spectra of citrate salts were investigated. Results indicate the crystalline states of the citrate salt samples strongly influence their THz featuring absorption peaks and citrate salts with crystallization water have larger absorption coefficients at the same frequency and higher possibility of existing featuring absorption peaks in comparison with citrate salts without crystallization water. Size of the metal cation also influences the THz absorption peak of the citrate salt and a small cation radius results in a large absorption peak frequency. This work illustrates the terahertz spectroscopy can be well used as a new technique to detect the citrate salts and differentiate their crystalline hydrates.

Antenna-Coupled Titanium Microbolometers: Application for Precise Control of Radiation Patterns in Terahertz Time-Domain Systems

An ability of lensless titanium-based antenna coupled microbolometers (Ti-μbolometers) operating at room temperature to monitor precisely radiation patterns in terahertz time-domain spectroscopy (THz-TDS) systems are demonstrated. To provide comprehensive picture, two different THz-TDS systems and Ti-μbolometers coupled with three different antennas-narrowband dipole antennas for 0.3 THz, 0.7 THz and a log-periodic antenna for wideband detection-were selected for experiments. Radiation patterns, spatial beam profiles and explicit beam evolution along the propagation axis are investigated; polarization-sensitive properties under various THz emitter power ranges are revealed. It was found that the studied Ti-μbolometers are convenient lensless sensors suitable to discriminate and control THz radiation pattern features in various wideband THz-TDS systems.

Titanium-Based Microbolometers: Control of Spatial Profile of Terahertz Emission in Weak Power Sources

Terahertz (THz) imaging and spectroscopy set-ups require fine optical alignment or precise control of spatial mode profile. We demonstrate universal, convenient and easy-to-use imaging—resonant and broadband antenna coupled ultrasensitive titanium-based—dedicated to accurately adjust and control spatial mode profiles without additional focusing optical components of weak power THz sources. Versatile operation of the devices is shown using different kinds of THz—electronic multiplier sources, optical THz mixer-based frequency domain and femtosecond optoelectronic THz time-domain spectrometers as well as optically pumped molecular THz laser. Features of the microbolometers within 0.15–0.6 THz range are exposed and discussed, their ability to detect spatial mode profiles beyond the antennas resonances, up to 2.52 THz, are explored. Polarization-sensitive mode control possibilities are examined in details. The suitability of the resonant antenna-coupled microbolometers to resolve low-absorbing objects at 0.3 THz is revealed via direct, dark field and phase contrast imaging techniques as well.

Surface enhanced Raman scattering substrate for the detection of explosives: Construction strategy and dimensional effect

Surface-enhanced Raman spectroscopy (SERS) technology has been reported to be able to quickly and non-destructively identify target analytes. SERS substrate with high sensitivity and selectivity gave SERS technology a broad application prospect. This contribution aims to provide a detailed and systematic review of the current state of research on SERS-based explosive sensors, with particular attention to current research advances. This review mainly focuses on the strategies for improving SERS performance and the SERS substrates with different dimensions including zero-dimensional (0D) nanocolloids, one-dimensional (1D) nanowires and nanorods, two-dimensional (2D) arrays, and three-dimensional (3D) networks. The effects of elemental composition, the shape and size of metal nanoparticles, hot-spot structure and surface modification on the performance of explosive detection are also reviewed. In addition, the future development tendency and application of SERS-based explosive sensors are prospected.

Spurious Absorption Frequency Appearance Due to Frequency Conversion Processes in Pulsed THz TDS Problems

The appearance of the spurious absorption frequencies caused by the frequency conversion process at the broadband THz pulse propagation in a medium is theoretically and experimentally discussed. The spurious absorption frequencies appear due to both the frequency doubling and generation of waves with sum or difference frequency. Such generation might occur because of the nonlinear response of a medium or its non-instantaneous response. This phenomenon is confirmed by the results of a few physical experiments provided with the THz CW signals and broadband THz pulses that are transmitted through the ordinary or dangerous substances. A high correlation between the time-dependent spectral intensities for the basic frequency and generated frequencies is demonstrated while using the computer simulation results. This feature of the frequency conversion might be used for the detection and identification of a substance.

Surface Persistence of Trace Level Deposits of Highly Energetic Materials

In the fields of Security and Defense, explosive traces must be analyzed at the sites of the terrorist events. The persistence on surfaces of these traces depends on the sublimation processes and the interactions with the surfaces. This study presents evidence that the sublimation process of these traces on stainless steel (SS) surfaces is very different than in bulk quantities. The enthalpies of sublimation of traces of four highly energetic materials: triacetone triperoxide (TATP), 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT), and 1,3,5- trinitrohexahydro-s-triazine (RDX) deposited on SS substrates were determined by optical fiber coupled-grazing angle probe Fourier Transform Infrared (FTIR) Spectroscopy. These were compared with enthalpies of sublimation determined by thermal gravimetric analysis for bulk amounts and differences between them were found. The sublimation enthalpy of RDX was very different for traces than for bulk quantities, attributed to two main factors. First, the beta-RDX phase was present at trace levels, unlike the case of bulk amounts which consisted only of the alpha-RDX phase. Second, an interaction between the RDX and SS was found. This interaction energy was determined using grazing angle FTIR microscopy. In the case of DNT and TNT, bulk and traces enthalpies were statistically similar, but it is evidenced that at the level of traces a metastable phase was observed. Finally, for TATP the enthalpies were statistically identical, but a non-linear behavior and a change of heat capacity values different from zero was found for both trace and bulk phases.