Performance and Long Distance Data Acquisition via LoRa Technology of a Tubular Plant Microbial Fuel Cell Located in a Paddy Field in West Kalimantan, Indonesia

Improved electrochemical properties of graphite electrodes incubated with iron powders in rice-paddy fields boost power outputs from microbial fuel cells

Studies have shown that the supplementation of anode-surrounding soil with zero-valent iron (ZVI) boosts power outputs from rice paddy-field microbial fuel cells (RP-MFCs). In order to understand mechanisms by which ZVI boosts outputs from RP-MFCs, the present study operated RP-MFCs with and without ZVI, and compositions of anode-associated bacteria and electrochemical properties of graphite anodes were analyzed after 3-month operation. Metabarcoding using 16S rRNA gene fragments showed that bacterial compositions did not largely differ among these RP-MFCs. Cyclic voltammetry showed improved electrochemical properties of anodes recovered from ZVI-supplemented RP-MFCs, and this was attributed to the adhesion of iron-oxide films onto graphite surfaces. Bioelectrochemical devices equipped with graphite anodes recovered from ZVI-supplemented RP-MFCs generated higher currents than those with fresh graphite anodes. These results suggest that ZVI is oxidized to iron oxides in paddy-field soil and adheres onto graphite anodes, resulting in the boost of power outputs from RP-MFCs.

The race between classical microbial fuel cells, sediment-microbial fuel cells, plant-microbial fuel cells, and constructed wetlands-microbial fuel cells: Applications and technology readiness level

Microbial fuel cell (MFC) is an interesting technology capable of converting the chemical energy stored in organics to electricity. It has raised high hopes among researchers and end users as the world continues to face climate change, water, energy, and land crisis. This review aims to discuss the journey of continuously progressing MFC technology from the lab to the field so far. It evaluates the historical development of MFC, and the emergence of different variants of MFC or MFC-associated other technologies such as sediment-microbial fuel cell (S-MFC), plant-microbial fuel cell (P-MFC), and integrated constructed wetlands-microbial fuel cell (CW-MFC). This review has assessed primary applications and challenges to overcome existing limitations for commercialization of these technologies. In addition, it further illustrates the design and potential applications of S-MFC, P-MFC, and CW-MFC. Lastly, the maturity and readiness of MFC, S-MFC, P-MFC, and CW-MFC for real-world implementation were assessed by multicriteria-based assessment. Wastewater treatment efficiency, bioelectricity generation efficiency, energy demand, cost investment, and scale-up potential were mainly considered as key criteria. Other sustainability criteria, such as life cycle and environmental impact assessments were also evaluated.

Organic Waste Substrates for Bioenergy Production via Microbial Fuel Cells: A Key Point Review

High-energy consumption globally has raised questions about the low environmentally friendly and high-cost processes used until now for energy production. Microbial fuel cells (MFCs) may support alternative more economically and environmentally favorable ways of bioenergy production based on their advantage of using waste. MFCs work as bio-electrochemical devices that consume organic substrates in order for the electrogenic bacteria and/or enzyme cultures to produce electricity and simultaneously lower the environmental hazardous value of waste such as COD. The utilization of organic waste as fuels in MFCs has opened a new research path for testing a variety of by-products from several industry sectors. This review presents several organic waste substrates that can be employed as fuels in MFCs for bioenergy generation and the effect of their usage on power density, COD (chemical oxygen demand) removal, and Coulombic efficiency enhancement. Moreover, a demonstration and comparison of the different types of mixed waste regarding their efficiency for energy generation via MFCs are presented. Future perspectives for manufacturing and cost analysis plans can support scale-up processes fulfilling waste-treatment efficiency and energy-output densities.

Microbial fuel cells for bioelectricity production from waste as sustainable prospect of future energy sector

Microbial fuel cell (MFC) is lauded for its potentials to solve both energy crisis and environmental pollution. Technologically, it offers the capability to harness electricity from the chemical energy stored in the organic substrate with no intermediate steps, thereby minimizes the entropic loss due to the inter-conversion of energy. The sciences underneath such MFCs include the electron and proton generation from the metabolic decomposition of the substrate by microbes at the anode, followed by the shuttling of these charges to cathode for electricity generation. While its promising prospects were mutually evinced in the past investigations, the upscaling of MFC in sustaining global energy demands and waste treatments is yet to be put into practice. In this context, the current review summarizes the important knowledge and applications of MFCs, concurrently identifies the technological bottlenecks that restricted its vast implementation. In addition, economic analysis was also performed to provide multiangle perspectives to readers. Succinctly, MFCs are mainly hindered by the slow metabolic kinetics, sluggish transfer of charged particles, and low economic competitiveness when compared to conventional technologies. From these hindering factors, insightful strategies for improved practicality of MFCs were formulated, with potential future research direction being identified too. With proper planning, we are delighted to see the industrialization of MFCs in the near future, which would benefit the entire human race with cleaner energy and the environment.

Plant microbial fuel cell: Opportunities, challenges, and prospects

Microbial fuel cells (MFCs) are considered as greener technologies for generation of bioenergy and simultaneously treatment of wastewater. However, the major drawback of these technologies was, rapid utilization of substrate by the microbes to generate power. This drawback is solved to a great extent by plant microbial fuel cell (PMFC) technology. Therefore, this review critically explored the challenges associated with PMFC technology and approaches to be employed for making it commercially feasible, started with brief introduction of MFCs, and PMFCs. This review also covered various factors like light intensity, carbon dioxide concentration in air, type of plant used, microbial flora in rhizosphere and also electrode material used which influence the efficiency of PMFC. Finally, this review comprehensively revealed the possibility of future intervention, such as application of biochar and preferable plants species which improve the performance of PMFC along with their opportunities challenges and prospects.

Enhanced electricity generation in rice paddy-field microbial fuel cells supplemented with iron powders

Microbial fuel cells installed in rice paddy fields (RP-MFCs) are able to serve as on-site batteries for operating low-power environmental sensors. In order to increase the utility and reliability of RP-MFCs, however, further research is necessary for boosting the power output. Here we examined several powdered iron species, including zero valent iron (ZVI), goethite, and magnetite, for their application to increasing power outputs from RP-MFCs. Soil around anodes was supplemented with either of these iron species, and RP-MFCs were operated for several months during the transplanting and harvesting. It was found that power outputs from RP-MFCs supplemented with ZVI were more than double the outputs from control (not supplemented with iron species) and other RP-MFCs, even after iron corrosion was ceased, and the maximum power density reached 130 mW/m² (per projected area of the anode). Metabarcoding of 16S rRNA gene amplicons suggested that several taxa represented by fermentative and exoelectrogenic bacteria were substantially increased in MFCs supplemented with ZVI. Results suggest that ZVI lowers oxidation/reduction potential around anodes, activates anaerobic microbes involved in the conversion of organic matter into electricity and increases power output from RP-MFCs.

A Thin Layer of Activated Carbon Deposited on Polyurethane Cube Leads to New Conductive Bioanode for (Plant) Microbial Fuel Cell

Large-scale implementation of (plant) microbial fuel cells is greatly limited by high electrode costs. In this work, the potential of exploiting electrochemically active self-assembled biofilms in fabricating three-dimensional bioelectrodes for (plant) microbial fuel cells with minimum use of electrode materials was studied. Three-dimensional robust bioanodes were successfully developed with inexpensive polyurethane foams (PU) and activated carbon (AC). The PU/AC electrode bases were fabricated via a water-based sorption of AC particles on the surface of the PU cubes. The electrical current was enhanced by growth of bacteria on the PU/AC bioanode while sole current collectors produced minor current. Growth and electrochemical activity of the biofilm were shown with SEM imaging and DNA sequencing of the microbial community. The electric conductivity of the PU/AC electrode enhanced over time during bioanode development. The maximum current and power density of an acetate fed MFC reached 3 mA·m−2 projected surface area of anode compartment and 22 mW·m−3 anode compartment. The field test of the Plant-MFC reached a maximum performance of 0.9 mW·m−2 plant growth area (PGA) at a current density of 5.6 mA·m−2 PGA. A paddy field test showed that the PU/AC electrode was suitable as an anode material in combination with a graphite felt cathode. Finally, this study offers insights on the role of electrochemically active biofilms as natural enhancers of the conductivity of electrodes and as transformers of inert low-cost electrode materials into living electron acceptors.