A Facile Fabrication of a Potentiometric Arrayed Glucose Biosensor Based on Nafion-GOx/GO/AZO

A biocatalytic cascade in enzyme/metal continuous-microflow microgel with stable intermediate channel for point-of-care biosensing

A fast and accurate method for ultrasensitive monitoring of substrate is significant for cascade molecular detection. Here, we synthesize a glucose oxidase (GOx) microgel with iron coordination (Fe/GOx microgel). The microgel is cross-linked by chitosan and iron ion coordination which construct a tubular structure. Powder X-ray diffraction and Brunauer-Emmett-Teller results confirm the tubular crystal structure with a high specific surface area is formed in the microgel. The tubular structure offers a stable channel for intermediate transport which ensures the stabilization for the intermediate transport, and high specific surface area enhances the interaction between substrates and catalysts. As a result, the sensitivity of the Fe/GOx microgel is 175.5 μA mM-1 cm-2 and the lowest detection limit is 4.42 μM. In addition, the nanoscale Fe/GOx microgel also has the characteristics of reusability and maintains its activity after five times of catalysis. The generation of free radicals during the catalytic process can be detected by light detection and electrochemical signal detection within different detection limits. Therefore, Fe/GOx microgel provides a new platform and catalyst for the precise detection of cascade catalysis.

Paper-based colorimetric sensors for point-of-care testing

By eliminating the need for sample transportation and centralized laboratory analysis, point-of-care testing (POCT) enables on-the-spot testing, with results available within minutes, leading to improved patient management and overall healthcare efficiency. Motivated by the rapid development of POCT, paper-based colorimetric sensing, a powerful analytical technique that exploits the changes in color or absorbance of a chemical species to detect and quantify analytes of interest, has garnered increasing attention. In this review, we strive to provide a bird's eye view of the development landscape of paper-based colorimetric sensors that harness the unique properties of paper to create low-cost, easy-to-use, and disposable analytical devices, thematically covering both fundamental aspects and categorized applications. In the end, we authors summarized the review with the remaining challenges and emerging opportunities. Hopefully, this review will ignite new research endeavors in the realm of paper-based colorimetric sensors.

Tunable Non-Enzymatic Glucose Electrochemical Sensing Based on the Ni/Co Bimetallic MOFs

Constructing high-performance glucose sensors is of great significance for the prevention and diagnosis of diabetes, and the key is to develop new sensitive materials. In this paper, a series of Ni2Co1-L MOFs (L = H2BPDC: 4,4'-biphenyldicarboxylic acid; H2NDC: 2,6-naphthalenedicarboxylic acid; H2BDC: 1,4-benzenedicarboxylic acid) were synthesized by a room temperature stirring method. The effects of metal centers and ligands on the structure, compositions, electrochemical properties of the obtained Ni2Co1-L MOFs were characterized, indicating the successful preparation of layered MOFs with different sizes, stacking degrees, electrochemical active areas, numbers of exposed active sites, and glucose catalytic activity. Among them, Ni2Co1-BDC exhibits a relatively thin and homogeneous plate-like morphology, and the Ni2Co1-BDC modified glassy carbon electrode (Ni2Co1-BDC/GCE) has the highest electrochemical performance. Furthermore, the mechanism of the enhanced glucose oxidation signal was investigated. It was shown that glucose has a higher electron transfer capacity and a larger apparent catalytic rate constant on the Ni2Co1-BDC/GCE surface. Therefore, tunable non-enzymatic glucose electrochemical sensing was carried out by regulating the metal centers and ligands. As a result, a high-sensitivity enzyme-free glucose sensing platform was successfully constructed based on the Ni2Co1-BDC/GCE, which has a wide linear range of 0.5-2899.5 μM, a low detection limit of 0.29 μM (S/N = 3), and a high sensitivity of 3925.3 μA mM-1 cm-2. Much more importantly, it was also successfully applied to the determination of glucose in human serum with satisfactory results, demonstrating its potential for glucose detection in real samples.

A wearable, minimally-invasive, fully electrochemically-controlled feedback minisystem for diabetes management

Diabetes is a chronic disease affecting 10% of the population globally, and can lead to serious damage in the heart, kidneys, eyes, blood vessels or nerves. Commercial artificial closed-loop feedback systems can significantly improve diabetes management and save lives. However, they are large and expensive for users. Here, we demonstrate for the first time a wearable, minimally-invasive, fully electrochemically-controlled feedback minisystem for diabetes management. Both the working principles of the sensor and pump in the feedback system are based on electrochemical reactions. The smart minisystem was constructed based on integrating the thermoplastic polyurethane hollow microneedles with an electrochemical biosensing device on its outer layer and an electrochemical micropump facing the inner layer of the microneedles. The sensing device was constructed based on sputtering thin metal films through a shadow mask and electroplating Prussian blue on the surface of the microneedles, followed by the immobilization of glucose oxidase on the working electrode. The electrochemical micropump was constructed by sputtering the interdigital electrodes, followed by sealing with a thin elastic film, which was further integrated with the inner channels of the microneedles. Both the sensor and the pump were electrically powered. Via being controlled by a printed circuit board, the biosensing device monitored the levels of interstitial glucose continuously to drive the electrochemical pump to deliver insulin intelligently, in order to control blood glucose within the normal range. The closed-loop feedback system was studied for its capability in maintaining the blood glucose levels of diabetic rats under various physiological conditions. The utility of the intelligent feedback system was successfully demonstrated on diabetic rats for controlling the blood glucose levels within the normal range. The minisystem is wearable, small, cost-effective, precise, stable and painless. It is anticipated that this approach opens a new paradigm for the development of closed-loop diabetes minisystems and may lead to a compelling future for diabetes management.

Development of a highly sensitive glucose nanocomposite biosensor based on recombinant enzyme from corn

BACKGROUND

Enzymes are biocatalysts that play a vital role in the production of biomolecules. Plants can be a valuable and cost-effective source for producing well-structured recombinant enzymes. Glucose is one of the most important biological molecules, providing energy to most living systems. An electrochemical method for immobilization of enzyme is promising because it is economic, generates less component waste, improves the signal-to-noise ratio, leads to a lower limit of detection, and stabilizes and protects the enzyme structure.

RESULTS

A glucose biosensor was constructed using polyaniline (PANI) and a recombinant enzyme from corn, plant-produced manganese peroxidase (PPMP), with polymerization of aniline as a monomer in the presence of gold nanoparticles (AuNPs)-glucose oxidase (GOx), and bovine serum albumin. Using linear sweep voltammetry and cyclic voltammetry techniques, PANI-AuNPs-GOx-PPMP/Au electrode exhibited a superior sensing property with a wider linear range of 0.005-16.0 mm, and a lower detection limit of 0.001 mm compared to PANI-GOx-PPMP/Au electrode and PANI-GOx-PPMP/AuNPs/Au electrode. The biosensor selectivity was assessed by determining glucose concentrations in the presence of ascorbic acid, dopamine, aspartame, and caffeine.

CONCLUSION

We conclude that a plant-produced Mn peroxidase enzyme combined with conductive polymers and AuNPs results in a promising nanocomposite biosensor for detecting glucose. The use of such devices for quality control in the food industry can have a significant economic impact. © 2022 Society of Chemical Industry.

The Characteristics Analysis of a Microfluid-Based EGFET Biosensor with On-Chip Sensing Film for Lactic Acid Detection

In this research, a microfluid-based extended gate field-effect transistor (EGFET) biosensor with an on-chip sensing window (OCSW) was fabricated. The detection window was composed of six metal layers, and a ruthenium dioxide (RuO₂) film was spattered on the surface and functionalized with lactase to detect lactic acid (LA). To detect LA in a more diversified way, a microfluidic system was integrated with the biosensor. Moreover, a special package was used to seal the sensing window and microfluidic tube and insulate it from other parts to prevent water molecule invasion and chip damage. The sensitivity analysis of the EGFET biosensor was studied by a semiconductor parameter analyzer (SPA). The static and dynamic measurements of the EGFET with sensing windows on a chip were analyzed. The sensing characteristics of the EGFET biosensor were verified by the experimental results. The proposed biosensor is suitable for wearable applications due to the advantages of its low weight, low voltage, and simple manufacturing process.

Recent Advances in Potentiometric Biosensing

Potentiometric biosensors are incredibly versatile tools with budding uses in industry, security, environmental safety, and human health. This mini-review on recent (2018-2020) advances in the field of potentiometric biosensors is intended to give a general overview of the main types of potentiometric biosensors for novices while still providing a brief but thorough summary of the novel advances and trends for experienced practitioners. These trends include the incorporation of nanomaterials, graphene, and novel immobilization materials, as well as a strong push towards miniaturized, flexible, and self-powered devices for in-field or at-home use.