Ion Selective Amperometric Biosensors for Environmental Analysis of Nitrate, Nitrite and Sulfate

Screen-printed biosensor based on electro-polymerization of bio-composite for nitrate detection in aqueous media

Bacillus sp. possessing a periplasmic nitrate reductase was used as a recognition element to develop a nitrate biosensor. The bacteria was embedded within a polyaniline (PANI) electro-conductive matrix via electro-polymerization on miniaturized carbon screen-printed electrodes (SPE) at 100 mV/s and scan rate from -0.35 V to + 1.7 V. Surface medication of SPE was verified via Fourier Transform Infrared spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The optimal bacterial density was OD600 1.2. To enhance the biosensors performance, Bacillus sp. was (1) grown in riboflavin (RF) inducing media as an endogenous redox mediator and (2) exposed to different gamma radiation doses as a physical method to increase electron transfer. Results show a link between exposing cells to gamma irradiation stress, this was evident by electron spin resonance (ESR) and changes in FTIR spectrum, in addition to the increase in catalase enzyme. The nitrate limit of detection (LOD) was 0.5-25 mg/L for non-irradiated RF induced immobilized cells and LOD was 0.5-75 mg/L nitrate for 2 kGy gamma irradiated cells. The prepared biosensor showed acceptable reproducibility and multiple usages after storage at 4°C over 3 months. Low cost and simple preparation allow the biosensor to be mass-produced as a disposable device. Bacillus sp. and its endogenous redox mediator immobilized within polyaniline are good candidates for the improvement of amperometric biosensors for the quantification of nitrate in aqueous solutions.

Behind the Optimization of the Sensor Film: Bioconjugation of Triangular Gold Nanoparticles with Hemoproteins for Sensitivity Enhancement of Enzymatic Biosensors

Electrochemical biosensors are widely used in a multitude of applications, such as medical, nutrition, research, among other fields. These sensors have been historically used and have not undergone many changes in terms of the involved electrochemical processes. In this work, we propose a new approach on the immobilization and enhancement of the electrochemical properties of the sensing layers through the control and bioconjugation of hemoproteins (hemoglobin, myoglobin, and cytochrome C) on anisotropic gold nanoparticles (gold nanotriangles (AuNTs)). The hemeproteins and the AuNTs are mixed in a solution, resulting in stable bioconjugates that are deposited onto the electrode surface to obtain the biosensors. All the systems proposed herein exhibited direct well-defined redox responses, highlighting the key role of the AuNTs acting as mediators of such electron transfers. Several protein layers surrounding the AuNTs are electroactive, as demonstrated from the charge measured by cyclic voltammetry. The retention of the stability of the hemeproteins once they are part of the bioconjugates is evidenced towards the electrocatalytic reduction of hydrogen peroxide, oxygen, and nitrite. The parameters obtained for the proposed biosensors are similar or even lower than those previously reported for similar systems based on nanomaterials, and they exhibit attractive properties that make them potential candidates for the latest developments in the field of sensing devices.

Core-shell micro/nanocapsules: from encapsulation to applications

Encapsulation is the way to wrap or coat one substance as a core inside another tiny substance known as a shell at micro and nano scale for protecting the active ingredients from the exterior environment. A lot of active substances, such as flavours, enzymes, drugs, pesticides, vitamins, in addition to catalysts being effectively encapsulated within capsules consisting of different natural as well as synthetic polymers comprising poly(methacrylate), poly(ethylene glycol), cellulose, poly(lactide), poly(styrene), gelatine, poly(lactide-co-glycolide)s, and acacia. The developed capsules release the enclosed substance conveniently and in time through numerous mechanisms, reliant on the ultimate use of final products. Such technology is important for several fields counting food, pharmaceutical, cosmetics, agriculture, and textile industries. The present review focuses on the most important and high-efficiency methods for manufacturing micro/nanocapsules and their several applications in our life.

Fast and simultaneous detection of dissolved BOD and nitrite in wastewater by using bioelectrode with bidirectional extracellular electron transport

Timely and simultaneously detecting BOD and nitrite concentrations is of great significance for curbing of water pollution and adjusting wastewater treatment strategies. However, existing BOD and nitrite biosensors cannot perform synchronous detection due to their single electroactivity and differences in detection time. This study reported a novel dual-function electrochemical biosensor (DFEB) that could perform fast, simultaneous detection of nitrite and dissolved BOD. DFEB conducted a potential-step chronoamperometry on the mixed-bacteria bioelectrode with bidirectional electron transfer ability to obtain response signals. DFEB accurately measured dissolved BOD in the range of 5 ∼ 100 mg BOD L-1 and nitrite in the range of 0.05 ∼ 16 mg NO2--N L-1 within 20 min and maintain stable performance over 200 tests. DFEB performed well in artificial wastewater, aquatic wastewater, anaerobic tank effluent and anammox effluent, with relative errors < 15.7% and 16.8% in detecting nitrite and dissolved BOD, respectively. Our study provided a feasible way to develop multifunctional biosensors for detecting pollutants with different redox properties in wastewater.

Review of the Analytical Methods Based on HPLC-Electrochemical Detection Coupling for the Evaluation of Organic Compounds of Nutritional and Environmental Interest

This review would like to show the state of the art regarding the coupling of High-Performance Liquid Chromatography (HPLC) with Electrochemical Detection (ED). Since a universal detector for HPLC is not available, the electrochemical detection methods, thanks to their versatility and specificity, are competitive with respect to the detectors currently used. The papers present in literature on HPLC-ED technique are analyzed and discussed: for example, they regard the development of analytical determinations of resveratrol, rosmarinic acid, aromatic heterocyclic amines and glyphosate in food matrices such as meat, aromatic plants, vegetables, fruit and tomato juices. These papers show that electrochemical sensors used as detectors for HPLC can offer better sensitivity values than other detectors. Furthermore, the use of specific working potentials allows avoid matrix interferences to be avoided by almost exclusively determining the analytes of interest. It should be underlined that HPLC-ED methods have a selectivity that allows for limitation of the sample preparation and clean-up procedures to a minimum, making them quick and easy to apply. In addition, these methods offer advantages such as the possibility of direct analysis, that derivatization is often not necessary, the cost-effectiveness of the instrumentation and the possibility of regenerating the electrodes which allows numerous analyses in succession.

A sensitive electrochemical sensor based on metal cobalt wrapped conducting polymer polypyrrole nanocone arrays for the assay of nitrite

The conducting polymer polypyrrole nanocones wrapped by metal cobalt (Co/PPy) are a promising platform for the detection of sodium nitrite, which can be obtained by an electrochemical deposition technique under a mild condition. Co/PPy nanocone arrays combined the high conductivity and large specific surface area of PPy nanocones with the redox properties of metal cobalt, and their 3D structure can provide more active sites for nitrite detection. Owing to the microstructure and excellent electrical properties of the nanocomposite, Co/PPy nanocone arrays were convenient to construct a high-performance nitrite sensor. The microscopic morphology and composition of Co/PPy nanocone arrays were characterized by SEM, FT-IR, XPS, and XRD, and their electrochemical performances were also investigated. The experimental results showed that Co/PPy nanocones exhibited excellent performance for nitrite determination. The sensors were used for the determination of nitrite in pickled Chinese cabbage and water samples, and the results were consistent with those of spectrophotometry. Hence, the synthesized Co/PPy nanocone arrays have a broad application prospect in food safety, environmental protection, and industrial manufacturing.

Functional Expression of a Mo-Cu-Dependent Carbon Monoxide Dehydrogenase (CODH) and Its Use as a Dissolved CO Bio-microsensor

Herein, we report the heterologous expression in Escherichia coli of a Mo-Cu-containing carbon monoxide dehydrogenase (Mo-Cu CODH) from Hydrogenophaga pseudoflava, which resulted in an active protein catalyzing CO oxidation to CO₂. By supplying the E. coli growth medium with Na₂MoO₄ (Mo) and CuSO₄ (Cu), the Mo-Cu CODH metal cofactors precursors, the expressed L-subunit was found to have CO-oxidation activity even without the M- and S- subunits. This successful expression of CO-oxidizing-capable single L-subunit provides direct evidence of its role as the catalytic center of Mo-Cu CODH that has not been discovered and studied before. Subsequently, we used the expressed protein to construct a CO bio-microsensor based on a newly developed fast and sensitive Clark-type CO₂ transducer using an aprotic solvent/ionic liquid electrolyte. The CO bio-microsensor exhibited a linear response to CO concentration in the 0-9 μM range, with a limit of detection (LOD) of 15 nM CO. The sensor uses a mixture of Mo-Cu CODH's L-subunit/Mo, Cu cofactors/methylene blue, confined in the enzyme chamber that is placed in front of a CO₂ transducer. The optimized sensor's sensitivity and performance were retained to levels of at least 80% for 1 week of continuous polarization and operation in an aqueous medium. We have also demonstrated the use of an alkaline front-trap solution to make a completely O₂/CO₂ interference-free microsensor. The CO bio-microsensor developed in this study is potentially useful as an analytical tool for the detection of trace CO in dissolved form for monitoring dissolved CO concentration dynamics in natural or synthetic systems.

An Improved Algorithm for Measuring Nitrate Concentrations in Seawater Based on Deep-Ultraviolet Spectrophotometry: A Case Study of the Aoshan Bay Seawater and Western Pacific Seawater

Nowadays, it is still a challenge for commercial nitrate sensors to meet the requirement of high accuracy in a complex water. Based on deep-ultraviolet spectral analysis and a regression algorithm, a different measuring method for obtaining the concentration of nitrate in seawater is proposed in this paper. The system consists of a deuterium lamp, an optical fiber splitter module, a reflection probe, temperature and salinity sensors, and a deep-ultraviolet spectrometer. The regression model based on weighted average kernel partial least squares (WA-KPLS) algorithm together with corrections for temperature and salinity (TSC) is established. After that, the seawater samples from Western Pacific and Aoshan Bay in Qingdao, China with the addition of various nitrate concentrations are studied to verify the reliability and accuracy of the method. The results show that the TSC-WA-KPLS algorithm shows the best results when compared against the multiple linear regression (MLR) and ISUS (in situ ultraviolet spectrophotometer) algorithms in the temperatures range of 4–25 °C, with RMSEP of 0.67 µmol/L for Aoshan Bay seawater and 1.08 µmol/L for Western Pacific seawater. The method proposed in this paper is suitable for measuring the nitrate concentration in seawater with higher accuracy, which could find application in the development of in-situ and real-time nitrate sensors.