Near-Infrared Spectroscopy and Aquaphotomics for Monitoring Mung Bean (Vigna radiata) Sprout Growth and Validation of Ascorbic Acid Content

Detection and analysis of hyaluronic acid raw materials from different sources by NIR and aquaphotomics

Hyaluronic acid (HA), a polysaccharide, is widely used for its essential physiological functions. Although the structures of low molecular weight HA produced by both acid and enzyme degradation methods are extremely similar, there are still differences due to the different degradation principles. There is currently no clear way to distinguish between HA prepared by acidolysis and enzymatic hydrolysis. Based on near-infrared (NIR) spectroscopy and aquaphotomics technology, a method for distinguishing HA raw materials and their mixtures from different sources was proposed, and HA with different mixed ratios was accurately quantified. First, NIR spectra of the HA samples were collected. The spectra were then preprocessed to improve the spectral resolution. Spectral information was extracted based on wavelet transform and principal component analysis, resulting in a final selection of 12 characteristic wavelengths containing classification information. The discriminative and quantitative models were then constructed using the 12 wavelengths. The discriminative model achieved a 100% identification rate for HA from different sources. The correlation coefficient of calibration (Rc), validation (Rp), external test (Rt), root mean square error of cross validation (RMSECV), calibration (RMSEC), validation (RMSEP), and external test (RMSET) of the mixed proportion quantitative model were 0.9876, 0.9876, 0.9898, 0.0546, 0.0433, 0.0440, and 0.0347, respectively. In this study, the problem of structural similarity and non-identifiability of HA produced by acidolysis and enzymatic hydrolysis was addressed, and quality monitoring of HA feedstock in HA circulating links was achieved. This is the first time to achieve accurate quantification of solid mixtures using the aquaphotomics method.

An Aquaphotomics Approach for Investigation of Water-Stress-Induced Changes in Maize Plants

The productivity of plants is considerably affected by various environmental stresses. Exploring the specific pattern of the near-infrared spectral data acquired non-destructively from plants subjected to stress can contribute to a better understanding of biophysical and biochemical processes in plants. Experiments for investigating NIR spectra of maize plants subjected to water stress were conducted. Two maize lines were used: US corn-belt inbred line B37 and mutant inbred XM 87-136, characterized by very high drought tolerance. After reaching the 4-leaf stage, 10 plants from each line were subjected to water stress, and 10 plants were used as control, kept under a regular water regime. The drought lasted until day 17 and then the plants were recovered by watering for 4 days. A MicroNIR OnSite-W Spectrometer (VIAVI Solutions Inc., Chandler, AZ, USA) was used for in vivo measurement of each maize leaf spectra. PLS models for determining drought days were created and aquagrams were calculated separately for the plants' second, third, and fourth leaves. Differences in absorption spectra were observed between control, stressed, and recovered maize plants, as well as between different measurement days of stressed plants. Aquagrams were used to visualize the water spectral pattern in maize leaves and how it changes along the drought process.

Aquaphotomics Monitoring of Lettuce Freshness during Cold Storage

Fresh-cut leafy vegetables are one of the most perishable products because they readily deteriorate in quality even during cold storage and have a relatively short shelf life. Since these products are in high demand, methods for rigorous quality control and estimation of freshness that are rapid and non-destructive would be highly desirable. The objective of the present research was to develop a rapid, non-destructive near-infrared spectroscopy (NIRS)-based method for the evaluation of changes during cold storage of lettuce using an aquaphotomics approach to monitor the water molecular structure in lettuce leaves. The reference measurements showed that after 6 days of dark, cold storage, the weight and water activity of lettuce leaves decreased and β-carotene decreased, while chlorophylls slightly increased. Aquaphotomics characterization showed large differences in the lettuce leaves' spectra depending on their growth zone. Difference spectra, principal component analysis (PCA) and linear discriminant analysis (LDA) confirmed the differences in the inner and outer leaves and revealed that spectra change as a function of storage time. Partial least squares regression (PLSR) allowed the prediction of the time spent in storage with a coefficient of determination of R² = 0.80 and standard error of RMSE = 0.77 days for inner, and R² = 0.86 and RMSE = 0.66 days for outer leaves, respectively. The following water absorbance bands were found to provide the most information in the spectra: 1348, 1360, 1373, 1385, 1391, 1410, 1416, 1422, 1441, 1447, 1453, 1466, 1472, 1490, 1503, 1515, 1521, 1534 and 1571 nm. They were further used as water matrix coordinates (WAMACs) to define the water spectral patterns (WASPs) of lettuce leaves. The WASPs of leaves served to succinctly describe the state of lettuces during storage. The changes in WASPs during storage reveled moisture loss, damage to cell walls and expulsion of intracellular water, as well as loss of free and weakly hydrogen-bonded water, all leading to a loss of juiciness. The WASPs also showed that damage stimulated the defense mechanisms and production of vitamin C. The leaves at the end of the storage period were characterized by water strongly bound to collapsed structural elements of leaf tissues, mainly cellulose, leading to a loss of firmness that was more pronounced in the outer leaves. All of this information was reflected in the changes of absorbance in the identified WAMACs, showing that the water molecular structure of lettuce leaves accurately reflects the state of the lettuce during storage and that WASPs can be used as a multidimensional biomarker to monitor changes during storage.

Aquaphotomics monitoring of strawberry fruit during cold storage - A comparison of two cooling systems

The objective of this study was to use aquaphotomics and near-infrared (NIR) spectroscopy to follow the changes in strawberries during cold storage in the refrigerator with an electric field generator (supercooling fridge, SCF) and without it (control fridge, CF). The NIR spectra of strawberries stored in these refrigerators were collected over the course of 15 days using a portable mini spectrometer and their weight was measured daily. The spectral data in the region of the first overtone of water (1,300-1,600 nm) were analyzed using aquaphotomics multivariate analysis. The results showed a decrease in weight loss of strawberries, but the loss of weight was significantly lower in SCF, compared to the CF. The reduction of weight loss due to exposure to an electric field was comparable to the use of coatings. The aquaphotomics analysis showed that the NIR spectra adequately captured changes in the fruit over the storage period, and that it is possible to predict how long the fruit spent in storage, regardless of the storage type. During aquaphotomics analysis, 19 water absorbance bands were found to be consistently repeating and to have importance for the description of changes in strawberries during cold storage. These bands defined the water spectral pattern (WASP), multidimensional biomarker that was used for the description of the state and dynamics of water in strawberries during time spent in storage. Comparison of WASPs of strawberries in CF and SCF showed that exposure to an electric field leads to a delay in ripening by around 3 days. This was evidenced by the increased amount of structural, strongly bound water and vapor-like trapped water in the strawberries stored in SCF. This particular state of water in strawberries stored in SCF was related to the hardening of the strawberry skin and prevention of moisture loss, in agreement with the results of significantly decreased weight loss.

Discrimination of Brassica juncea Varieties Using Visible Near-Infrared (Vis-NIR) Spectroscopy and Chemometrics Methods

Brown mustard (Brassica juncea (L.) is an important oilseed crop that is mostly used to produce edible oils, industrial oils, modified lipids and biofuels in subtropical nations. Due to its higher level of commercial use, the species has a huge array of varieties/cultivars. The purpose of this study is to evaluate the use of visible near-infrared (Vis-NIR) spectroscopy in combination with multiple chemometric approaches for distinguishing four B. juncea varieties in Korea. The spectra from the leaves of four different growth stages of four B. juncea varieties were measured in the Vis-NIR range of 325–1075 nm with a stepping of 1.5 nm in reflectance mode. For effective discrimination, the spectral data were preprocessed using three distinct approaches, and eight different chemometric analyses were utilized. After the detection of outliers, the samples were split into two groups, one serving as a calibration set and the other as a validation set. When numerous preprocessing and chemometric approaches were applied for discriminating, the combination of standard normal variate and deep learning had the highest classification accuracy in all the growth stages achieved up to 100%. Similarly, few other chemometrics also yielded 100% classification accuracy, namely, support vector machine, generalized linear model, and the random forest. Of all the chemometric preprocessing methods, Savitzky–Golay filter smoothing provided the best and most convincing discrimination. The findings imply that chemometric methods combined with handheld Vis-NIR spectroscopy can be utilized as an efficient tool for differentiating B. juncea varieties in the field in all the growth stages.

Pilot Aquaphotomic Study of the Effects of Audible Sound on Water Molecular Structure

Sound affects the medium it propagates through and studies on biological systems have shown various properties arising from this phenomenon. As a compressible media and a “collective mirror”, water is influenced by all internal and external influences, changing its molecular structure accordingly. The water molecular structure and its changes can be observed as a whole by measuring its electromagnetic (EMG) spectrum. Using near-infrared spectroscopy and aquaphotomics, this pilot study aimed to better describe and understand the sound-water interaction. Results on purified and mineral waters reported similar effects from the applied 432 Hz and 440 Hz frequency sound, where significant reduction in spectral variations and increased stability in water were shown after the sound perturbation. In general, the sound rearranged the initial water molecular conformations, changing the samples’ properties by increasing strongly bound, ice-like water and decreasing small water clusters and solvation shells. Even though there was only 8 Hz difference in applied sound frequencies, the change of absorbance at water absorbance bands was specific for each frequency and also water-type-dependent. This also means that sound could be effectively used as a perturbation tool together with spectroscopy to identify the type of bio, or aqueous, samples being tested, as well as to identify and even change water functionality.

Vis-NIR Spectroscopy and Machine Learning Methods for the Discrimination of Transgenic Brassica napus L. and Their Hybrids with B. juncea

The rapid advancement of genetically modified (GM) technology over the years has raised concerns about the safety of GM crops and foods for human health and the environment. Gene flow from GM crops may be a threat to the environment. Therefore, it is critical to develop reliable, rapid, and low-cost technologies for detecting and monitoring the presence of GM crops and crop products. Here, we used visible near-infrared (Vis-NIR) spectroscopy to distinguish between GM and non-GM Brassica napus, B. juncea, and F1 hybrids (B. juncea X GM B. napus). The Vis-NIR spectra were preprocessed with different preprocessing methods, namely normalization, standard normal variate, and Savitzky–Golay. Both raw and preprocessed spectra were used in combination with eight different chemometric methods for the effective discrimination of GM and non-GM plants. The standard normal variate and support vector machine combination was determined to be the most accurate model in the discrimination of GM, non-GM, and hybrid plants among the many combinations (99.4%). The use of deep learning in combination with Savitzky–Golay resulted in 99.1% classification accuracy. According to the findings, it is concluded that handheld Vis-NIR spectroscopy combined with chemometric analyses could be used to distinguish between GM and non-GM B. napus, B. juncea, and F1 hybrids.

Assessment of Wine Adulteration Using Near Infrared Spectroscopy and Laser Backscattering Imaging

Food adulteration is in the focus of research due to its negative effect on safety and nutritional value and because of the demand for the protection of brands and regional origins. Portugieser and Sauvignon Blanc wines were selected for experiments. Samples were made by water dilution, the addition of sugar and then a combination of both. Near infrared (NIR) spectra were acquired in the range of 900–1700 nm. Partial least squares regression was performed to predict the adulteration level. The model including all wines and adulterations achieved a prediction error of 0.59% added sugar and 6.85% water dilution. Low-power laser modules were used to collect diffuse reflectance signals at wavelengths of 532, 635, 780, 808, 850, 1064 nm. The general linear model resulted in a higher prediction error of 3.06% added sugar and 20.39% water dilution. Instead of classification, the present study investigated the feasibility of non-destructive methods in the prediction of adulteration level. Laser scattering successfully detected the added sugar with linear discriminant analysis (LDA), but its prediction accuracy was low. NIR spectroscopy might be suitable for rapid non-destructive estimation of wine adulteration.

An Overview of Near Infrared Spectroscopy and Its Applications in the Detection of Genetically Modified Organisms

Near-infrared spectroscopy (NIRS) has become a more popular approach for quantitative and qualitative analysis of feeds, foods and medicine in conjunction with an arsenal of chemometric tools. This was the foundation for the increased importance of NIRS in other fields, like genetics and transgenic monitoring. A considerable number of studies have utilized NIRS for the effective identification and discrimination of plants and foods, especially for the identification of genetically modified crops. Few previous reviews have elaborated on the applications of NIRS in agriculture and food, but there is no comprehensive review that compares the use of NIRS in the detection of genetically modified organisms (GMOs). This is particularly important because, in comparison to previous technologies such as PCR and ELISA, NIRS offers several advantages, such as speed (eliminating time-consuming procedures), non-destructive/non-invasive analysis, and is inexpensive in terms of cost and maintenance. More importantly, this technique has the potential to measure multiple quality components in GMOs with reliable accuracy. In this review, we brief about the fundamentals and versatile applications of NIRS for the effective identification of GMOs in the agricultural and food systems.

Theoretical Simulation of Near-Infrared Spectrum of Piperine: Insight into Band Origins and the Features of Regression Models

We investigated the near-infrared spectrum of piperine using quantum mechanical calculations. We evaluated two efficient approaches, DVPT2//PM6 and DVPT2//ONIOM [PM6:B3LYP/6-311++G(2df, 2pd)] that yielded a simulated spectrum with varying accuracy versus computing time factor. We performed vibrational assignments and unveiled complex nature of the near-infrared spectrum of piperine, resulting from a high level of band convolution. The most meaningful contribution to the near-infrared absorption of piperine results from binary combination bands. With the available detailed near-infrared assignment of piperine, we interpreted the properties of partial least square regression models constructed in our earlier study to describe the piperine content in black pepper samples. Two models were compared with spectral data sets obtained with a benchtop and a miniaturized spectrometer. The two spectrometers implement distinct technology which leads to a profound instrumental difference and discrepancy in the predictive performance when analyzing piperine content. We concluded that the sensitivity of the two instruments to certain types of piperine vibrations is different and that the benchtop spectrometer unveiled higher selectivity. Such difference in obtaining chemical information from a sample can be one of the reasons why the benchtop spectrometer performs better in analyzing the piperine content of black pepper. This evidenced direct correspondence between the features critical for applied near-infrared spectroscopic routine and the underlying vibrational properties of the analyzed constituent in a complex sample.