An Electroanalytical Solution for the Determination of Pb2+ in Progressive Hair Dyes Using the Cork-Graphite Sensor

Electrochemical Formation of Pb Microwires with Tunable Morphology on Liquid Metal Electrodes

Liquid metal electrodes based on Ga are an emerging area of interest given their fluid properties which can have significant impact on electrochemical processes. Here we study metal electrodeposition, namely lead electrodeposition on the liquid metal electrodes, gallium (Ga) and galinstan (GaInSn), which was performed in two different Pb2+ electrolytes (PbCl2 and Pb(NO3)2) to investigate any differences in the nature of the electrodeposit. Cyclic voltammetry and chronoamperometry were used to study the characteristics, kinetics, and nucleation and growth mechanisms of the electrodeposition process. Analysis of this electrochemical data, such as current density-time transients and diffusion coefficients under different potentials, revealed distinct behaviors for Pb deposition at each liquid metal and electrolyte, influencing the final morphology of the lead deposit. It was also found that the electrolyte concentration and deposition time were found to impact the morphology of the electrodeposited Pb. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed various types of Pb microstructures, including wire, branch-like, and flake-like formations, highlighting the differences in lead structural development when deposited on liquid gallium and Galinstan electrodes.

Simultaneous Electrochemical Detection of Cu2+ and Zn2+ in Pig Farm Wastewater

In recent years, the rapid development of pig farming has led to a large quantity of heavy metal-polluted wastewater. Thus, it was desirable to develop a simple heavy metal detection method for fast monitoring of the wastewater from the pig farms. Therefore, there was an urgent need to develop a simple method for rapidly detecting heavy metal ions in pig farm wastewater. Herein, a simple electrochemical method for simultaneous detection of Cu2+ and Zn2+ was developed and applied to pig farm wastewater. With a glassy carbon electrode and anodic stripping voltammetry, simultaneous detection of Cu2+ and Zn2+ in water was achieved without the need for complicated electrode modification. Furthermore, it was found that the addition of Cd2+ can enhance the response current of the electrode to Zn2+, which increased the signal by eight times. After systematic optimization, the limit of detection (LOD) of 9.3 μg/L for Cu2+ and 45.3 μg/L for Zn2+ was obtained. Finally, it was successfully applied for the quantification of Cu2+ and Zn2+ with high accuracy in pig farm wastewater. This work provided a new and simple solution for fast monitoring of the wastewater from pig farms and demonstrated the potential of electrochemical measurement for application in modern animal husbandry.

An optical and electrochemical sensor based on L-arginine functionalized reduced graphene oxide

The electrochemical and photochemical properties of graphene derivatives could be significantly improved by modifications in the chemical structure. Herein, reduced graphene oxide (RGO) was functionalized with L-arginine (L-Arg) by an amidation reaction between the support and amino acid. Deposition of a powerful ligand, L-Arg, on the optically active support generated an effective optical chemosensor for the determination of Cd(II), Co(II), Pb(II), and Cu(II). In addition, L-Arg-RGO was used as an electrode modifier to fabricate L-Arg-RGO modified glassy-carbon electrode (L-Arg-RGO/GCE) to be employed in the selective detection of Pb(II) ions by differential pulse anodic stripping voltammetry (DP-ASV). L-Arg-RGO/GCE afforded better results than the bare GCE, RGO/GCE, and L-Arg functionalized graphene quantum dot modified GCE. The nanostructure of RGO, modification by L-Arg, and homogeneous immobilization of resultant nanoparticles at the electrode surface are the reasons for outstanding results. The proposed electrochemical sensor has a wide linear range with a limit of detection equal to 0.06 nM, leading to the easy detection of Pb(II) in the presence of other cations. This research highlighted that RGO as a promising support of optical, and electrochemical sensors could be used in the selective, and sensitive determination of transition metals depends on the nature of the modifier. Moreover, L-Arg as an abundant amino acid deserves to perch on the support for optical, and electrochemical determination of transition metals.