A Review of Noninvasive Methodologies to Estimate the Blood Pressure Waveform

The accuracy of radial artery applanation tonometry and intra-arterial blood pressure monitoring in critically ill patients: An evidence-based review

The invasive intra-arterial approach is the gold standard for measuring blood pressure in intensive care units where accuracy is crucial. However, invasive procedures increase the risk of infections and mortality. This evidence-based review aimed to determine whether continuous non-invasive blood pressure (CNIBP) monitoring, using Radial Artery Applanation Tonometry (RAAT) devices, is as accurate as invasive methods. Six papers were included: three prospective cohort studies and three comparative studies. Most studies showed that mean arterial pressure is accurately recorded through RAAT monitoring; however, more research is needed to assess the accuracy of non-invasive readings of systolic and diastolic blood pressures, as data are not always concordant.

Replication of Radial Pulses Using Magneto-Rheological Fluids

The radial pulse is a critical health marker with expanding applications in wearable technology. To improve these applications, developing a pulse generator that consistently produces realistic pulses is crucial for validation and training. The goal of this study was to design and test a cost-effective pulse simulator that can accurately replicate a wide range of age-dependent radial pulses with simplicity and precision. To this end, this study incorporated a magneto-rheological (MR) fluid device into a cam-based pulse simulator. The MR device, as a key component, enables pulse shaping without the need for additional cams, substantially reducing the cost and complexity of control compared with existing pulse simulators. To evaluate the performance of the MR pulse simulator, the root-mean-square (RMS) error criterion (less than 5%) was used to compare the experimentally obtained pulse waveform with the in vivo pulse waveform for specific age groups. After demonstrating that the MR simulator could produce three representative in vivo pulses, a parametric study was conducted to show the feasibility of the slope-based pulse-shaping method for the MR pulse simulator to continuously generate a range of age-related pulses.

Screen-Printable Iontronic Pressure Sensor with Thermal Expansion Microspheres for Pulse Monitoring

Constructing microstructures to improve the sensitivity of flexible pressure sensors is an effective approach. However, the preparation of microstructures usually involves inverted molds or subtractive manufacturing methods, which are difficult in large-scale (e.g., in screen printing) preparation. To solve this problem, we introduced thermally expandable microspheres for screen printing to fabricate flexible sensors. Thermally expandable microspheres can be constructed into microstructures by simple heating after printing, which simplifies the microstructure fabrication step. In addition, the added microspheres can also be used as ionic liquid reservoir materials to further increase the capacitance change and improve the sensitivity. The prepared sensors exhibited superior performance, including ultrahigh sensitivity (Smax = 49999.5 kPa-1) and wide detection range (0-350 kPa). Even after 30,000 cycles at a high pressure of 300 kPa and a low pressure of 30 kPa, the sensor showed minimal signal degradation, demonstrating long-term cycling stability. In order to verify the practical potential of the sensors, we performed human radial artery beat detection experiments using these sensors. The variations in the intensity of the 3D radial artery pulse wave can be observed very clearly, which is important for human health monitoring. The above demonstrates that our strategy can provide an effective approach for the large-scale preparation of high-performance flexible pressure sensors.

Flexible Ultrasonic Transducers for Wearable Biomedical Applications: A Review on Advanced Materials, Structural Designs, and Future Prospects

Due to the rapid developments in materials science and fabrication techniques, wearable devices have recently received increased attention for biomedical applications, particularly in medical ultrasound (US) imaging, sensing, and therapy. US is ubiquitous in biomedical applications because of its noninvasive nature, nonionic radiating, high precision, and real-time capabilities. While conventional US transducers are rigid and bulky, flexible transducers can be conformed to curved body areas for continuous sensing without restricting tissue movement or transducer shifting. This article comprehensively reviews the application of flexible US transducers in the field of biomedical imaging, sensing, and therapy. First, we review the background of flexible US transducers. Following that, we discuss advanced materials and fabrication techniques for flexible US transducers and their enabling technology status. Finally, we highlight and summarize some promising preliminary data with recent applications of flexible US transducers in biomedical imaging, sensing, and therapy. We also provide technical barriers, challenges, and future perspectives for further research and development.

Development of a Personalized Multiclass Classification Model to Detect Blood Pressure Variations Associated with Physical or Cognitive Workload

Comprehending the regulatory mechanisms influencing blood pressure control is pivotal for continuous monitoring of this parameter. Implementing a personalized machine learning model, utilizing data-driven features, presents an opportunity to facilitate tracking blood pressure fluctuations in various conditions. In this work, data-driven photoplethysmograph features extracted from the brachial and digital arteries of 28 healthy subjects were used to feed a random forest classifier in an attempt to develop a system capable of tracking blood pressure. We evaluated the behavior of this latter classifier according to the different sizes of the training set and degrees of personalization used. Aggregated accuracy, precision, recall, and F1-score were equal to 95.1%, 95.2%, 95%, and 95.4% when 30% of a target subject's pulse waveforms were combined with five randomly selected source subjects available in the dataset. Experimental findings illustrated that incorporating a pre-training stage with data from different subjects made it viable to discern morphological distinctions in beat-to-beat pulse waveforms under conditions of cognitive or physical workload.

Pulse2AI: An Adaptive Framework to Standardize and Process Pulsatile Wearable Sensor Data for Clinical Applications

Goal: To establish Pulse2AI as a reproducible data preprocessing framework for pulsatile signals that generate high-quality machine-learning-ready datasets from raw wearable recordings. Methods: We proposed an end-to-end data preprocessing framework that adapts multiple pulsatile signal modalities and generates machine-learning-ready datasets agnostic to downstream medical tasks. Results: a dataset preprocessed by Pulse2AI improved systolic blood pressure estimation by 29.58%, from 11.41 to 8.03 mmHg in root-mean-square-error (RMSE) and its diastolic counterpart by 26.01%, from 7.93 to 5.87 mmHg in RMSE. For respiration rate (RR) estimation, Pulse2AI boosted performance by 19.69%, from 1.47 to 1.18 breaths per minute (BrPM) in mean-absolute-error (MAE). Conclusion: Pulse2AI turns pulsatile signals into machine learning (ML) ready datasets for arbitrary remote health monitoring tasks. We tested Pulse2AI on multiple pulsatile modalities and demonstrated its efficacy in two medical applications. This work bridges valuable assets in remote sensing and internet of medical things to ML-ready datasets for medical modeling.

Perioperative Patients With Hemodynamic Instability: Consensus Recommendations of the Anesthesia Patient Safety Foundation

In November of 2022, the Anesthesia Patient Safety Foundation held a Consensus Conference on Hemodynamic Instability with invited experts. The objective was to review the science and use expert consensus to produce best practice recommendations to address the issue of perioperative hemodynamic instability. After expert presentations, a modified Delphi process using discussions, voting, and feedback resulted in 17 recommendations regarding advancing the perioperative care of the patient at risk of, or with, hemodynamic instability. There were 17 high-level recommendations. These recommendations related to the following 7 domains: Current Knowledge (5 statements); Preventing Hemodynamic Instability-Related Harm During All Phases of Care (4 statements); Data-Driven Quality Improvement (3 statements); Informing Patients (2 statements); The Importance of Technology (1 statement); Launch a National Campaign (1 statement); and Advancing the Science (1 statement). A summary of the recommendations is presented in Table 1 .

Lean body mass positively associate with blood pressure in Chinese adults: the roles of ages and body fat distribution

BACKGROUND

The relationship between lean body mass (LBM) and blood pressure (BP) is controversial and limited. This study investigated the associations between LBM indexes and BP in adults of different ages and with varying body fat distribution.

METHODS

The data for the present analysis was obtained from a cross-sectional survey of 1,465 adults (50.7% males) aged 18-70 years conducted in Beijing, China. Regional LBM and fat distribution, including fat mass (FM) and android to gynoid fat ratio (AOI), were assessed using a dual-energy X-ray bone densitometer. Generalized Liner Model (GLM) was employed. Confounders, including age, sex, height, weight, smoking, and alcohol use, were evaluated through questionnaires and physical examinations.

RESULTS

Males had higher rates of hypertension (11.19% vs. 4.92%) and prehypertension (21.57% vs. 14.59%) than females. The mean systolic blood pressure (SBP) and diastolic blood pressure (DBP) were 122.04 mmHg and 76.68 mmHg. There were no significant associations between LBM and DBP (p > 0.05). However, arms LBM (β = 1.86, 95% CI: 0.77, 2.94) and trunk LBM (β = 0.37, 95% CI: 0.01, 0.73) were significantly associated with SBP. The association of LBM on DBP was stronger with increasing ages, and stronger in females than in males (p < 0.001). The association between adults' arms LBM and SBP was stronger in the high level FM group (β = 2.74 vs. β = 1.30) and high level AOI group (β = 1.80 vs. β = 2.08).

CONCLUSION

The influence of LBM on SBP increases with age, particularly after the age twenty years in females. For adults with high FM or high AOI, LBM in the arms, showed a stronger positive predictive association with SBP. This suggests that, in addition to controlling fat content, future efforts to improve cardiovascular health in adults should include the management of LBM (especially in the upper body).

Meta-Analysis of Pulse Transition Features in Non-Invasive Blood Pressure Estimation Systems: Bridging Physiology and Engineering Perspectives

The pulse transition features (PTFs), including pulse arrival time (PAT) and pulse transition time (PTT), hold significant importance in estimating non-invasive blood pressure (NIBP). However, the literature showcases considerable variations in terms of PTFs' correlation with blood pressure (BP), accuracy in NIBP estimation, and the comprehension of the relationship between PTFs and BP. This inconsistency is exemplified by the wide-ranging correlations reported across studies investigating the same feature. Furthermore, investigations comparing PAT and PTT have yielded conflicting outcomes. Additionally, PTFs have been derived from various bio-signals, capturing distinct characteristic points like the pulse's foot and peak. To address these inconsistencies, this study meticulously reviews a selection of such research endeavors while aligning them with the biological intricacies of blood pressure and the human cardiovascular system (CVS). Each study underwent evaluation, considering the specific signal acquisition locale and the corresponding recording procedure. Moreover, a comprehensive meta-analysis was conducted, yielding multiple conclusions that could significantly enhance the design and accuracy of NIBP systems. Grounded in these dual aspects, the study systematically examines PTFs in correlation with the specific study conditions and the underlying factors influencing the CVS. This approach serves as a valuable resource for researchers aiming to optimize the design of BP recording experiments, bio-signal acquisition systems, and the fine-tuning of feature engineering methodologies, ultimately advancing PTF-based NIBP estimation.

Continuous Blood Pressure Monitoring in Patients Having Surgery: A Narrative Review

Hypotension can occur before, during, and after surgery and is associated with postoperative complications. Anesthesiologists should thus avoid profound and prolonged hypotension. A crucial part of avoiding hypotension is accurate and tight blood pressure monitoring. In this narrative review, we briefly describe methods for continuous blood pressure monitoring, discuss current evidence for continuous blood pressure monitoring in patients having surgery to reduce perioperative hypotension, and expand on future directions and innovations in this field. In summary, continuous blood pressure monitoring with arterial catheters or noninvasive sensors enables clinicians to detect and treat hypotension immediately. Furthermore, advanced hemodynamic monitoring technologies and artificial intelligence-in combination with continuous blood pressure monitoring-may help clinicians identify underlying causes of hypotension or even predict hypotension before it occurs.

Decision Support System Proposal for Medical Evacuations in Military Operations

The area of military operations is a big challenge for medical support. A particularly important factor that allows medical services to react quickly in the case of mass casualties is the ability to rapidly evacuation of wounded soldiers from a battlefield. To meet this requirement, an effective medical evacuation system is essential. The paper presented the architecture of the electronically supported decision support system for medical evacuation during military operations. The system can also be used by other services such as police or fire service. The system meets the requirements for tactical combat casualty care procedures and is composed of following elements: measurement subsystem, data transmission subsystem and analysis and inference subsystem. The system, based on the continuous monitoring of selected soldiers' vital signs and biomedical signals, automatically proposes a medical segregation of wounded soldiers (medical triage). The information on the triage was visualized using the Headquarters Management System for medical personnel (first responders, medical officers, medical evacuation groups) and for commanders, if required. All elements of the architecture were described in the paper.

Intraoperative Beat-to-Beat Pulse Transit Time (PTT) Monitoring via Non-Invasive Piezoelectric/Piezocapacitive Peripheral Sensors Can Predict Changes in Invasively Acquired Blood Pressure in High-Risk Surgical Patients

BACKGROUND

Non-invasive tracking of beat-to-beat pulse transit time (PTT) via piezoelectric/piezocapacitive sensors (PES/PCS) may expand perioperative hemodynamic monitoring. This study evaluated the ability for PTT via PES/PCS to correlate with systolic, diastolic, and mean invasive blood pressure (SBP_IBP, DBP_IBP, and MAP_IBP, respectively) and to detect SBP_IBP fluctuations.

METHODS

PES/PCS and IBP measurements were performed in 20 patients undergoing abdominal, urological, and cardiac surgery. A Pearson's correlation analysis (r) between 1/PTT and IBP was performed. The predictive ability of 1/PTT with changes in SBP_IBP was determined by area under the curve (reported as AUC, sensitivity, specificity).

RESULTS

Significant correlations between 1/PTT and SBP_IBP were found for PES (r = 0.64) and PCS (r = 0.55) (p < 0.01), as well as MAP_IBP/DBP_IBP for PES (r = 0.6/0.55) and PCS (r = 0.5/0.45) (p < 0.05). A 7% decrease in 1/PTT_PES predicted a 30% SBP_IBP decrease (0.82, 0.76, 0.76), while a 5.6% increase predicted a 30% SBP_IBP increase (0.75, 0.7, 0.68). A 6.6% decrease in 1/PTT_PCS detected a 30% SBP_IBP decrease (0.81, 0.72, 0.8), while a 4.8% 1/PTT_PCS increase detected a 30% SBP_IBP increase (0.73, 0.64, 0.68).

CONCLUSIONS

Non-invasive beat-to-beat PTT via PES/PCS demonstrated significant correlations with IBP and detected significant changes in SBP_IBP. Thus, PES/PCS as a novel sensor technology may augment intraoperative hemodynamic monitoring during major surgery.

Advancement in the Cuffless and Noninvasive Measurement of Blood Pressure: A Review of the Literature and Open Challenges

Hypertension is a chronic condition that is one of the prominent reasons behind cardiovascular disease, brain stroke, and organ failure. Left unnoticed and untreated, the deterioration in a health condition could even result in mortality. If it can be detected early, with proper treatment, undesirable outcomes can be avoided. Until now, the gold standard is the invasive way of measuring blood pressure (BP) using a catheter. Additionally, the cuff-based and noninvasive methods are too cumbersome or inconvenient for frequent measurement of BP. With the advancement of sensor technology, signal processing techniques, and machine learning algorithms, researchers are trying to find the perfect relationships between biomedical signals and changes in BP. This paper is a literature review of the studies conducted on the cuffless noninvasive measurement of BP using biomedical signals. Relevant articles were selected using specific criteria, then traditional techniques for BP measurement were discussed along with a motivation for cuffless measurement use of biomedical signals and machine learning algorithms. The review focused on the progression of different noninvasive cuffless techniques rather than comparing performance among different studies. The literature survey concluded that the use of deep learning proved to be the most accurate among all the cuffless measurement techniques. On the other side, this accuracy has several disadvantages, such as lack of interpretability, computationally extensive, standard validation protocol, and lack of collaboration with health professionals. Additionally, the continuing work by researchers is progressing with a potential solution for these challenges. Finally, future research directions have been provided to encounter the challenges.

Blood Pressure Measurement: From Cuff-Based to Contactless Monitoring

Blood pressure (BP) determines whether a person has hypertension and offers implications as to whether he or she could be affected by cardiovascular disease. Cuff-based sphygmomanometers have traditionally provided both accuracy and reliability, but they require bulky equipment and relevant skills to obtain precise measurements. BP measurement from photoplethysmography (PPG) signals has become a promising alternative for convenient and unobtrusive BP monitoring. Moreover, the recent developments in remote photoplethysmography (rPPG) algorithms have enabled new innovations for contactless BP measurement. This paper illustrates the evolution of BP measurement techniques from the biophysical theory, through the development of contact-based BP measurement from PPG signals, and to the modern innovations of contactless BP measurement from rPPG signals. We consolidate knowledge from a diverse background of academic research to highlight the importance of multi-feature analysis for improving measurement accuracy. We conclude with the ongoing challenges, opportunities, and possible future directions in this emerging field of research.

Chronic Kidney Disease as a Cardiovascular Disorder-Tonometry Data Analyses

Tonometry is commonly used to provide efficient and good diagnostics for cardiovascular disease (CVD). There are many advantages of this method, including low cost, non-invasiveness and little time to perform. In this study, the effort was undertaken to check whether tonometry data hides valuable information associated with different stages of chronic kidney disease (CKD) and end-stage renal disease (ESRD) treatment. For this purpose, six groups containing patients at different stages of CKD following different ways of dialysis treatment, as well as patients without CKD but with CVD and healthy volunteers were assessed. It was revealed that each of the studied groups had a unique profile. Only the type of dialysis was indistinguishable a from tonometric perspective (hemodialysis vs. peritoneal dialysis). Several techniques were used to build profiles that independently gave the same outcome: analysis of variance, network correlation structure analysis, multinomial logistic regression, and discrimination analysis. Moreover, to evaluate the classification potential of the discriminatory model, all mentioned techniques were later compared and treated as feature selection methods. Although the results are promising, it could be difficult to express differences as simple mathematical relations. This study shows that artificial intelligence can differentiate between different stages of CKD and patients without CKD. Potential future machine learning models will be able to determine kidney health with high accuracy and thereby classify patients. ClinicalTrials.gov Identifier: NCT05214872.

Recent Advances in Non-Invasive Blood Pressure Monitoring and Prediction Using a Machine Learning Approach

Blood pressure (BP) monitoring can be performed either invasively via arterial catheterization or non-invasively through a cuff sphygmomanometer. However, for conscious individuals, traditional cuff-based BP monitoring devices are often uncomfortable, intermittent, and impractical for frequent measurements. Continuous and non-invasive BP (NIBP) monitoring is currently gaining attention in the human health monitoring area due to its promising potentials in assessing the health status of an individual, enabled by machine learning (ML), for various purposes such as early prediction of disease and intervention treatment. This review presents the development of a non-invasive BP measuring tool called sphygmomanometer in brief, summarizes state-of-the-art NIBP sensors, and identifies extended works on continuous NIBP monitoring using commercial devices. Moreover, the NIBP predictive techniques including pulse arrival time, pulse transit time, pulse wave velocity, and ML are elaborated on the basis of bio-signals acquisition from these sensors. Additionally, the different BP values (systolic BP, diastolic BP, mean arterial pressure) of the various ML models adopted in several reported studies are compared in terms of the international validation standards developed by the Advancement of Medical Instrumentation (AAMI) and the British Hypertension Society (BHS) for clinically-approved BP monitors. Finally, several challenges and possible solutions for the implementation and realization of continuous NIBP technology are addressed.

Real-Time Cuffless Continuous Blood Pressure Estimation Using 1D Squeeze U-Net Model: A Progress toward mHealth

Measuring continuous blood pressure (BP) in real time by using a mobile health (mHealth) application would open a new door in the advancement of the healthcare system. This study aimed to propose a real-time method and system for measuring BP without using a cuff from a digital artery. An energy-efficient real-time smartphone-application-friendly one-dimensional (1D) Squeeze U-net model is proposed to estimate systolic and diastolic BP values, using only raw photoplethysmogram (PPG) signal. The proposed real-time cuffless BP prediction method was assessed for accuracy, reliability, and potential usefulness in the hypertensive assessment of 100 individuals in two publicly available datasets: Multiparameter Intelligent Monitoring in Intensive Care (MIMIC-I) and Medical Information Mart for Intensive Care (MIMIC-III) waveform database. The proposed model was used to build an android application to measure BP at home. This proposed deep-learning model performs best in terms of systolic BP, diastolic BP, and mean arterial pressure, with a mean absolute error of 4.42, 2.25, and 2.56 mmHg and standard deviation of 4.78, 2.98, and 3.21 mmHg, respectively. The results meet the grade A performance requirements of the British Hypertension Society and satisfy the AAMI error range. The result suggests that only using a short-time PPG signal is sufficient to obtain accurate BP measurements in real time. It is a novel approach for real-time cuffless BP estimation by implementing an mHealth application and can measure BP at home and assess hypertension.