Coagulation and Dissolution of CuO Nanoparticles in the Presence of Dissolved Organic Matter Under Different pH Values

Comprehensive toxicity assessment of nanodiamond on Blaps polychresta: implications and novel findings

With the increasing development of nanomaterials, the use of nanodiamonds (NDs) has been broadly manifested in many applications. However, their high penetration into the ecosystem indubitably poses remarkable toxicological risks. This paper investigates the toxic effects of NDs on the darkling beetle, Blaps polychresta Forskal, 1775 (Coleoptera: Tenebrionidae). Survival analysis was carried out by monitoring the beetles for 30 d after the injection of four different doses of NDs. A dose of 10.0 mg NDs/g body weight, causing less than 50% mortality effect, was assigned in the analysis of the different organs of studied beetles, including testis, ovary, and midgut. Structural and ultrastructural analyses were followed using light, TEM, and SEM microscopes. In addition, a variety of stress markers and enzyme activities were assessed using spectrophotometric methods. Furthermore, cell viability and DNA damage were evaluated using cytometry and comet assay, respectively. Compared to the control group, the NDs-treated group was exposed to various abnormalities within all the studied organs as follows. Significant disturbances in enzyme activities were accompanied by an apparent dysregulation in the antioxidant system. The flow cytometry results indicated a substantial decrease of viable cells along with a rise of apoptotic and necrotic cells. The comet assay demonstrated a highly increased level of DNA damage. Likewise, histological analyses accentuated the same findings showing remarkable deformities in the studied organs. Prominently, the research findings substantially contribute for the first time to evaluating the critical effects of NDs on B. polychresta, adopted as the bioindicator in this paper.

Promoting Effect of Cu on Pd Applied to the Hydrazine Electro-Oxidation and Direct Hydrazine Fuel Cells

Use of liquid fuels in fuel cells is advantageous due to the easier and safer handling, transportation, and storage. Among the different options, hydrazine is of interest since the formation of highly poisoning carbonaceous species is avoided, in addition to its high energy density. In the search for more active direct hydrazine fuel cells (DHFC), this study analyzes the influence of Cu as an auxiliary metal on Pd. Three different PdxCu/C (x = 3, 1, and 0.33) catalysts were prepared by chemical reduction with NaBH4. The materials were physiochemically characterized by X-ray diffraction, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. Electrochemical analysis in a three-electrode glass cell and a single-cell DHFC was also carried out to study the impact on the electroactivity. Cu exerts a beneficial effect by reducing the adsorption energies of the adsorbed species and donating oxidized species for the completion of the hydrazine electro-oxidation, optimally balanced in the Pd1Cu/C (maximum power density of 180 mW cm−2). As a counterpoint, Cu slightly promotes the non-faradaic decomposition of hydrazine, seen by a larger H2 signal in mass spectroscopy in the anode exhaust at high current densities, which results in a slight loss in faradaic efficiency.

The impact of engineered nanomaterials on the environment: Release mechanism, toxicity, transformation, and remediation

The presence and longevity of nanomaterials in the ecosystem, as well as their properties, account for environmental toxicity. When nanomaterials in terrestrial and aquatic systems are exposed to the prevailing environmental conditions, they undergo various transformations such as dissociation, dissolution, and aggregation, which affects the food chain. The toxicity of nanomaterials is influenced by a variety of factors, including environmental factors and its physico-chemical characteristics. Bioaccumulation, biotransformation, and biomagnification are the mechanisms that have been identified for determining the fate of nanomaterials. The route taken by nanomaterials to reach living cells provides us with information about their toxicity profile. This review discusses the recent advances in the transport, transformation, and fate of nanomaterials after they are released into the environment. The review also discusses how nanoparticles affect lower trophic organisms through direct contact, the impact of nanoparticles on higher trophic organisms, and the possible options for remediation.

Enhanced removal of phosphate using pomegranate peel-modified nickel‑lanthanum hydroxide

In this work, a bimetallic Ni/La nanoparticle-laded biosorbent was fabricated from pomegranate fibers by solvothermal synthesis method. The material exhibited a high-efficient phosphate removal capability. The results of the characterization analysis showed that the surface of pomegranate fibers was rough and evenly coated with Ni and La after modification, and the specific surface area of Ni-La@Peel increased to 50.20 m²/g, providing a large number of adsorption sites for phosphate removal. The maximum phosphate removal rate of adsorbent was higher than 97% in a wide pH range (3.7-10.8). The maximum adsorption capacities of Ni-La@Peel were 226.55 mg-P/g and 220.31 mg-P/g under alkaline and acidic conditions, respectively, as calculated using the Langmuir model. Meanwhile, all the results were consistent with the Langmuir isothermal (R² = 0.99) and kinetic pseudo-second order models (R² = 0.99), indicating that the phosphate removal mechanism of Ni-La@Peel was mainly related to homogeneous chemisorption. Experimental results showed that in the presence of other anions, such as chloride, sulfate, nitrate, bromide and fluoride, the adsorption capacity of phosphate was only reduced by about 10% compared to the blank sample individually. In addition, the phosphate removal efficiency of Ni-La@Peel remained 82.05% at 7th adsorption-desorption cycle. These findings show that Ni-La@Peel is a promising material for purification of phosphate-containing wastewater.

Cutting-edge spectroscopy techniques highlight toxicity mechanisms of copper oxide nanoparticles in the aquatic plant Myriophyllum spicatum

Copper oxide nanoparticles (CuO-NPs) have been increasingly released in aquatic ecosystems over the past decades as they are used in many applications. Cu toxicity to different organisms has already been highlighted in the literature, however toxicity mechanisms of the nanoparticulate form remain unclear. Here, we investigated the effect, transfer and localization of CuO-NPs compared to Cu salt on the aquatic plant Myriophyllum spicatum, an ecotoxicological model species with a pivotal role in freshwater ecosystems, to establish a clear mode of action. Plants were exposed to 0.5 mg/L Cu salt, 5 and 70 mg/L CuO-NPs during 96 h and 10 days. Several morphological and physiological endpoints were measured. Cu salt was found more toxic than CuO-NPs to plants based on all the measured endpoints despite a similar internal Cu concentration demonstrated via Cu mapping by micro particle-induced X-ray emission (μPIXE) coupled to Rutherford backscattering spectroscopy (RBS). Biomacromolecule composition investigated by FTIR converged between 70 mg/L CuO-NPs and Cu salt treatments after 10 days. This demonstrates that the difference of toxicity comes from a sudden massive Cu²⁺ addition from Cu salt similar to an acute exposure, versus a progressive leaching of Cu²⁺ from CuO-NPs representing a chronic exposure. Understanding NP toxicity mechanisms can help in the future conception of safer by design NPs and thus diminishing their impact on both the environment and humans.

Photochemical Oxidation Process of Copper from Electroplating Wastewater: Process Performance and Kinetic Study

An investigation of the process of ozone combined with ultraviolet radiation has been carried out in order to establish the kinetics for photochemical oxidation of copper (Cu) from electroplating wastewater. The effects of operating parameters, including initial Cu concentration, ozone dosage, UV irradiation intensity, and pH value on the photochemical oxidation of Cu have been studied comprehensively. The Cu concentration during the reaction was identified using atomic absorption spectroscopy (AAS) method. The solid product was analyzed using X-ray diffraction (XRD) and scanning electron microscope–energy-dispersive X-ray (SEM–EDX) methods. It was found that the UV-Ozone process has high performance on Cu removal compared to UV and Ozone processes due to the high production rate of HO• radicals. It was also found that the solid product from the UV-Ozone process was CuO monoclinic crystal phase. The initial Cu concentration, ozone dosage, and pH value were significantly affected the Cu removal efficiency. On the other hand, the UV irradiation intensity was not significant; however, it has responsibility in promoting the ozone photolysis. The kinetics model for the photochemical oxidation of Cu was established following the first-order kinetic model. Furthermore, the reaction mechanism was also developed.

Development of a sequential extraction and speciation procedure for assessing the mobility and fractionation of metal nanoparticles in soils

This study describes the development of a sequential extraction procedure for the evaluation of metal nanoparticle mobility and bioaccessibility in soils. The procedure, that was developed using gold nanoparticles (AuNPs) as model species, relies on the fractionation of nanoparticles by sequentially dissolving soil matrix components (carbonates, metal oxides, organic matter and mineral phases) in order to release the entrapped nanoparticle species in the extract solution. By summing up the concentration of AuNPs recovered in each fraction it was found that 93.5% of the spiked AuNP concentration could be recovered which satisfactorily represents the nominal AuNP concentration in the soil. The efficiency of the procedure was found to depend on several procedural artifacts related to the separation of AuNPs from soil colloids and the reactivity of the extraction reagents with AuNPs and their precursor metal ions. Based on the results obtained a protocol for the speciation of the AuNPs and Au ions in the soil sample was also developed. The results of the study show that both AuNPs and Au ions are mainly associated with soil organic matter, which significantly reduces their mobility, while a small amount (<10%) is associated with metal oxides which are more mobile and potentially bioaccessible. The developed procedure provides a springboard for further development of sequential extraction procedures of metal nanoparticles in soils that could be used to assess both the exposure and release of metal nanoparticles and their precursor metal ions in the environment (as total extractable concentration) as well as provide evidence regarding their bioaccessibility and potential bioavailability by determining the concentration of nanoparticles in each specific soil fraction.

Advanced In Vitro Testing Strategies and Models of the Intestine for Nanosafety Research

There is growing concern about the potential adverse effects of oral exposure to engineered nanomaterials (ENM). Recent years have witnessed major developments in and advancement of intestinal in vitro models for nanosafety evaluation. The present paper reviews the key factors that should be considered for inclusion in nonanimal alternative testing approaches to reliably reflect the in vivo dynamics of the physicochemical properties of ENM as well the intestinal physiology and morphology. Currently available models range from simple cell line-based monocultures to advanced 3D systems and organoids. In addition, in vitro approaches exist to replicate the mucous barrier, digestive processes, luminal flow, peristalsis, and interactions of ENM with the intestinal microbiota. However, while the inclusion of a multitude of individual factors/components of particle (pre)treatment, exposure approach, and cell model approximates in vivo-like conditions, such increasing complexity inevitably affects the system's robustness and reproducibility. The selection of the individual modules to build the in vitro testing strategy should be driven and justified by the specific purpose of the study and, not least, the intended or actual application of the investigated ENM. Studies that address health hazards of ingested ENM likely require different approaches than research efforts to unravel the fundamental interactions or toxicity mechanisms of ENM in the intestine. Advanced reliable and robust in vitro models of the intestine, especially when combined in an integrated testing approach, offer great potential to further improve the field of nanosafety research.