Effect of Flow Rate and Particle Concentration on the Transport and Deposition of Bare and Stabilized Zero-Valent Iron Nanoparticles in Sandy Soil

Prediction of the aggregation rate of nanoparticles in porous media in the diffusion-controlled regime

The fate and aggregation of nanoparticles (NPs) in the subsurface are important due to potentially harmful impacts on the environment and human health. This study aims to investigate the effects of flow velocity, particle size, and particle concentration on the aggregation rate of NPs in a diffusion-limited regime and build an equation to predict the aggregation rate when NPs move in the pore space between randomly packed spheres (including mono-disperse, bi-disperse, and tri-disperse spheres). The flow of 0.2 M potassium chloride (KCl) through the random sphere packings was simulated by the lattice Boltzmann method (LBM). The movement and aggregation of cerium oxide (CeO2) particles were then examined by using a Lagrangian particle tracking method based on a force balance approach. This method relied on Newton's second law of motion and took the interaction forces among particles into account. The aggregation rate of NPs was found to depend linearly on time, and the slope of the line was a power function of the particle concentration, the Reynolds (Re) and Schmidt (Sc) numbers. The exponent for the Sc number was triple that of the Re number, which was evidence that the random movement of NPs has a much stronger effect on the rate of diffusion-controlled aggregation than the convection.

Fabrication of Curcumin Diethyl γ-Aminobutyrate-Loaded Chitosan-Coated Magnetic Nanocarriers for Improvement of Cytotoxicity against Breast Cancer Cells

This study shows the effectiveness of magnetic-guide targeting in the delivery of curcumin diethyl γ-aminobutyrate (CUR-2GE), a prodrug of curcumin (CUR) previously synthesized to overcome unfavorable physicochemical properties of CUR. In this study, chitosan (Ch)-coated iron oxide nanoparticles (Ch-IONPs) were fabricated and optimized using Box-Behnken design-based response surface methodology for delivery of CUR-2GE. Ch was used as a coating material on the nanoparticle surface to avoid aggregation. The optimized condition for preparing Ch-IONPs consisted of using 4 mg Ch fabricated at pH 11 under a reaction temperature of 85 °C. The optimized Ch-IONPs were successfully loaded with CUR-2GE with sufficient loading capacity (1.72 ± 0.01%) and encapsulation efficiency (94.9 ± 0.8%). The obtained CUR-2GE-loaded Ch-IONPs (CUR-2GE-Ch-IONPs) exhibited desirable characteristics including a particle size of less than 50 nm based on TEM images, superparamagnetic property, highly crystalline IONP core, sufficient stability, and sustained-release profile. In the presence of permanent magnets, CUR-2GE-Ch-IONPs significantly increased cellular uptake and cytotoxicity toward MDA-MB-231 with a 12-fold increase in potency compared to free CUR-2GE, indicating the potential of magnetic-field assisted delivery of CUR-2GE-Ch-IONPs for the treatment of triple-negative breast cancer.

Vertical transport and retention behavior of polystyrene nanoplastics in simulated hyporheic zone

The ecological risk of microplastics (MPs) usually depends on their environmental behavior, however, few studies focused on the impact of hydrodynamic perturbations on the fate of MPs in hyporheic zone. This study chose quartz sand (250-425 μm) as simulated porous medium to investigate the transport of 100 nm polystyrene nanoplastics (PSNPs) under hydrodynamic factors, including flow rates (0.5, 1.0, and 2.0 mL/min), flow orientations (up-flow, down-flow, and horizontal-flow), and water saturations (50%, 80%, and 100%), as well as different salinities and temperatures. The breakthrough curves (BTCs) and retained profiles (RPs) of PSNPs were compared and analyzed by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Due to the small size and moderate density of PSNPs, as well as high flow rates, the flow orientation exhibited little effect on the PSNP transport. However, high flow rate, low salinity, high water saturation, and low temperature would facilitate the mobility of PSNPs. The increase in salinity from zero to 35 PSU (practical salinity units) caused the compression of electrical double layer and weakened the electrostatic repulsion between PSNPs and sands, which dramatically decreased the penetration rate from 100% to zero. Especially, the lower energy barrier of PSNPs-PSNPs at 3.5 and 35 PSU (16.45 k_BT and zero, respectively) facilitated the adsorption of PSNPs on sand via ripening mechanism. Due to the strong adsorption of PSNPs by sand at high salinity, the effect of flow rate on PSNP transport was more pronounced at low salinity. The mobility of PSNPs at 0.035 PSU was enhanced by 41.4%-75.3% as the flow rate increased from 0.5 to 2.0 mL/min, which was contributed from the reversible deposition in lower secondary energy minimum depth at low salinity and the stronger hydrodynamic drag force generated by the high flow rate. However, the sufficient molecular diffusion at low flow rate promoted the occupation of PSNPs on adsorption sites. In addition, the penetration rate of PSNPs decreased by 25.0% as the water saturation decreased from 100% to 50%, indicating that the film straining at the air-water interface would hinder the transport of PSNPs. Finally, temperature increase impeded the penetration of PSNPs by 6.26%-23.1% via blocking mechanism. Our results suggest that low-salinity, high-flow river systems may be at greater risk of MPs contamination due to enhanced vertical transport capability.

Assessment of shear-thinning fluids and strategies for enhanced in situ removal of heavy chlorinated compounds-DNAPLs in an anisotropic aquifer

The removal of chlorinated organic hydrocarbons (COHs) -DNAPLs was studied in permeability-contrasted sandboxes with an egg-box shaped substratum. Aqueous solutions were compared to viscous shear-thinning fluids (xanthan solution and foam). Interfacial and viscous effects were compared by increasing the capillary number of injected fluids. Non-spatially targeted DNAPL recovery (NSTR) where the driving force was the injection pressure, was compared to spatially targeted DNAPL recovery (STR) where a pumping system allowed the controlled flow. A historical contamination made of a complex mixture of COHs and hexachlorobutadiene (HCBD) as a model were used. NSTR results showed that DNAPL recovery with non-viscous liquids did not exceed 40%. The best results were obtained for xanthan solutions with surfactant ~ 1.3 ×CMC for which pure phase recovery amounted to 88% and 93% for HCBD and for the historical DNAPL, respectively. The STR strategy showed similar recovery yields, whereas xanthan concentrations were 10-times lower. Mass balances on DNAPL showed that at most, 0.15% of COHs was dissolved in the aqueous effluents. NZVI (1 g.l^-1) were delivered in xanthan in view of the chemical degradation of residual COHs and showed a 65% transmission through the low permeability soil.

Numerical Simulation of Erosion Wear for Continuous Elbows in Different Directions

The purpose of the present study is to simulate the continuous bend erosion process in different directions, using the dense discrete particle model (DDPM). The influence of the length of the straight pipe in the middle of the continuous bend is investigated. The Rosin–Rammler method is introduced to define the diameter distribution of erosion particles, which is theoretically closer to the actual engineering erosion situation. The numerical model is based on the Euler–Lagrange method, in which the continuous phase and the particle phase are established on a fixed Euler grid. The Lagrange model is used to track the particles, and the interaction between particles is simulated by particle flow mechanics theory. The velocity field distribution, pressure variation, and turbulent kinetic energy of gas–solid two-phase flow, composed of natural gas and gravel in the pipeline, are studied. The simulation results, using the one-way coupled DPM and the four-way coupled DDPM, are compared and analyzed. The results show that the DDPM has good accuracy in predicting the distribution of the continuous bend erosion processes in different directions. The erosion rates of particles with an average distribution size of 50 μm are significantly increased (8.32 times), compared with that of 10 μm, at the same gas transmission rate. It is also indicated that it is important to consider the impact between particles and the coupling between fluid and particles in the erosion simulation of the continuous elbow when using the CFD method.

Nanoscale Zero-Valent Iron Modified by Bentonite with Enhanced Cr(VI) Removal Efficiency, Improved Mobility, and Reduced Toxicity

The aggregation of nanoscale zero-valent iron (nZVI) particles and their limited transport ability in environmental media hinder their application in environmental remediation. In this study, the Cr(VI) removal efficiency, transport performance, and toxicity of nZVI and bentonite-modified nZVI (B-nZVI) were investigated. Compared with nZVI, B-nZVI improved the removal efficiency of Cr(VI) by 10%, and also significantly increased the transport in quartz sand and soil. Increasing the flow rate can enhance the transport of nZVI and B-nZVI in the quartz sand columns. The transport of the two materials in different soils was negatively correlated with the clay composition. Besides, modification of nZVI by bentonite could reduce toxicity to luminous bacteria (Photobacterium phosphereum T3) and ryegrass (Lolium perenne L.). Compared with Fe-EDTA, the transfer factors of nZVI and B-nZVI were 65.0% and 66.4% lower, respectively. This indicated that although iron nanoparticles accumulated in the roots of ryegrass, they were difficult to be transported to the shoots. The results of this study indicate that B-nZVI has a strong application potential in in situ environmental remediation.