Study on the Performance of Composite Adsorption of Cu2+ by Chitosan/β-Cyclodextrin Cross-Linked Zeolite

Effective removal of Cu(II) from water by three-dimensional composite microspheres based on chitosan/sodium alginate/silicon dioxide: Adsorption performance and mechanism

Chitosan (CS) is commonly used as an adsorbent for removing Cu(II) from water, but it has drawbacks such as solubility in dilute acid, difficulty in recycling in powder form, and short service life. This study utilized sodium alginate (SA) as a gel carrier to encapsulate CS, combined with silicon dioxide (SiO2) to improve mechanical stability. The preparation of CS/SA/SiO2 (SSC1.0) involved physical blending, CaCl2 cross-linking, and freeze-drying. Characterization methods such as SEM-EDS, FTIR, BET, and XRD were used to analyze the structural composition of SSC1.0. The material exhibited a folded surface, porous internal cross-section, nitrogen/oxygen-containing functional groups, and thermal stability in high temperatures and various aqueous environments. The adsorption performance of SSC1.0 on Cu(II) was evaluated under different conditions, showing a maximum adsorption capacity of 47.50 mg/g. The material maintained a removal rate above 70 % after 5 cycles. SSC1.0 also showed the highest removal rate of Cu(II) when applied to mine wastewater treatment. Adsorption modeling indicated that the process was driven by chemical reactions and was spontaneous and heat-absorbing.'

Zinc oxide nanoparticles encapsulated in alginate beads: a promising and recyclable adsorbent for simultaneous uptake of toxic metals

Heavy metal toxicity is a known problem and various methods are used for treatment. Adsorption has some advantages and it would be promising if environmentally friendly and cheap materials were utilized. Alginate and zinc oxide nanoparticles were selected and composite alginate beads were used for the removal of mixed metals from aqueous solutions. Batch and column experiments were conducted to determine some parameters' effects and the adsorbent's real application potential. According to the batch experiments, zinc oxide nanoparticles to alginate ratio of 0.5 g g-1, and pH levels nearby to the neutral range led to better metal removals. 0.5 ml min-1of flow rate supplied better metal removal efficiencies in columns, with the highest treatment as 86% of Pb2+. Acid treatment can be successfully applied for the regeneration of the adsorbent, at least three times only with a 4% reduction in the adsorption efficiency. Heavy metal uptake was compatible with the pseudo 2nd order model indicating chemisorption as a dominant mechanism. Also, the intraparticle diffusion model illustrated adsorption might govern more than one step. The Langmuir model had the best fit and suggested monolayer covering for Pb2+, 76.3 mg g-1. Alginate-based nanocomposite beads were useful for mixed metal removal and could be used.

β-cyclodextrin grafted multi-walled carbon nanotubes/chitosan (MWCNT/Cs/CD) nanocomposite for treatment of methylene blue-containing aqueous solutions

β-cyclodextrin (CD) was grafted with multi-walled carbon nanotubes/chitosan (MWCNTs/Cs) to obtain MWCNTs/Cs/CD nanocomposite (NC) for methylene blue (MB) adsorption from aqueous media. TEM, XRD, TGA, Raman spectra, and BET & BJH analyses were utilized to characterize and confirm the successful synthesis of as-prepared NC. MB capture was investigated by considering the parameters of pH (1.9-9.0), temperature (∼16-63 °C), sonication time (∼5-15 min), MB concentration (∼1.2-48 mg/L), and NC dose (0.03-0.26 mg). The obtained responses were then modelled using CCD, generalized regression neural network (GRNN), and least squares support vector machine (LS-SVM), of which the latter found to provide most reliable and accurate results (RMSE = 0.0235, MAE = 0.020, AAD = 0.0047, and R2 = 0.999). Moreover, the genetic algorithm-based optimization results showed that under the respective values of 7.05, 45.5 °C, 10 min, 23 mg/L, 0.12 g, MWCNTs/Cs/CD NC would be able to remove 96.75% of MB with an adsorption capacity of 603 mg/g, through different mechanisms mainly electrostatic interactions. Following from Dubinin-Radushkevich (D-R) isotherm (qs = 460.66 ± 8.9 and R2 > 0.99) and intraparticle diffusion kinetic (R2 = 0.75-0.90) models indicated a chemical adsorption mechanism. Besides, thermodynamic parameters (ΔH◦ = -66.9 kJ/mol, ΔG◦ = between -3.77 kJ/mol and -8.52 kJ/mol, and ΔS◦ = 237.1818 J/mol K) confirmed an endothermic and spontaneous nature for the adsorption. These findings along with appropriate recyclability (five times), turn the as prepared NC to a promising material in removing MB from aqueous solutions.