Oxidative Photodegradation of Pyrene and Fluoranthene by Fe-Based and Zn-Based Fenton Reagents

A review on recent advancements in the treatment of polyaromatic hydrocarbons (PAHs) using sulfate radicals based advanced oxidation process

Polyaromatic hydrocarbons (PAHs) are the most persistent compounds that get contaminated in the soil and water. Nearly 16 PAHs was considered to be a very toxic according US protection Agency. Though its concentration level is low in the environments but the effects due to it, is enormous. Advanced Oxidation Process (AOP) is an emergent methodology towards treating such pollutants with low and high molecular weight of complex substances. In this study, sulfate radical (SO4‾•) based AOP is emphasized for purging PAH from different sources. This review essentially concentrated on the mechanism of SO4‾• for the remediation of pollutants from different sources and the effects caused due to these pollutants in the environment was reduced by this mechanism is revealed in this review. It also talks about the SO4‾• precursors like Peroxymonosulfate (PMS) and Persulfate (PS) and their active participation in treating the different sources of toxic pollutants. Though PS and PMS is used for removing different contaminants, the degradation of PAH due to SO4‾• was presented particularly. The hydroxyl radical (•OH) mechanism-based methods are also emphasized in this review along with their limitations. In addition to that, different activation methods of PS and PMS were discussed which highlighted the performance of transition metals in activation. Also this review opened up about the degradation efficiency of contaminants, which was mostly higher than 90% where transition metals were used for activation. Especially, on usage of nanoparticles even 100% of degradation could be able to achieve was clearly showed in this literature study. This study mainly proposed the treatment of PAH present in the soil and water using SO4‾• with different activation methodologies. Particularly, it emphasized about the importance of treating the PAH to overcome the risk associated with the environment and humans due to its contamination.

Advanced oxidation processes for the removal of mono and polycyclic aromatic hydrocarbons - A review

Aromatic hydrocarbons (AHs) are toxic environmental contaminants presented in most of the environmental matrices. Advanced oxidation processes (AOPs) for the removal of AHs in the account of complete mineralization from various environmental matrices have been reviewed in this paper. An in-depth discussion on various AOPs for mono (BTEX) and polyaromatic hydrocarbons (PAHs) and their derivatives is presented. Most of the AOPs were effective in the removal of AHs from the aquatic environment. A comparative study on the degradation of various AHs revealed that the oxidation of the AHs is strongly dependent on the number of aromatic rings and the functional groups attached to the ring. The formation of halogenated and nitrated derivatives of AHs in the real contaminated water containing chloride, nitrite, and nitrate ions seems to be a challenge in using the AOPs in real systems. The phenolic compounds, quinone, alcohols, and aliphatic acids are the important byproducts formed during the oxidation of AHs, initiated by the attack of reactive oxygen species (ROS) on their electron-rich center. In conclusion, AOPs are the adaptable method for the removal of AHs from different environmental matrices. The persulfate-based AOPs were applied in the soil phase removal as an in situ chemical oxidation of AHs. Moreover, the combination of AOPs will be a conclusive solution to avoid or minimize unexpected or other toxic intermediate products and to obtain rapid oxidation of AHs.

Fluorene oxidation by solar-driven photo-Fenton process: toward mild pH conditions

Polycyclic aromatic hydrocarbons (PAHs) are on the list of priority pollutants to be eliminated from the environment due to their carcinogenic and mutagenic action, chemical stability, and resistance to biodegradation. The aim of this study was to evaluate the degradation of fluorene, a well-known PAH, in aqueous solutions (0.03 and 0.08 mg L^-1), by means of a solar-driven conventional (PF) and modified photo-Fenton mediated by ferrioxalate complexes (PFF). Photolysis was also employed for comparison purposes. PF reaction was evaluated at different pH values (2.8, 3.5, and 4.0) and iron concentrations (2, 5, 10, and 20 mg L^-1). On the other hand, PFF studies were conducted at mild pH conditions (4.0, 5.0, and 6.0) and iron content of 2 mg L^-1, keeping initial iron/oxalate molar ratio at 1:3. In both PF and PFF, the initial hydrogen peroxide/iron molar ratio was maintained at 5. In the presence of methanol as cosolvent for fluorene dissolution, the PF reaction was hampered and no consumption of H₂O₂ was observed during the reaction carried out at constant pH (2.8). This led to low degradation rates, similar to those achieved by photolysis. Under the same pH but using acetonitrile as cosolvent for fluorene dissolution, fluorene degradation was found to be proportional to the iron content used in the PF experiments. On the other hand, at an invariable iron concentration of 5 mg Fe²⁺ L^-1, the increase in pH was accompanied by a decrease in the molar fraction of the most photoactive iron complex (FeOH²⁺) and ferric hydroxides precipitation, leading to a reduction in the fluorene degradation rate. With regard to the PFF tests, similar fluorene degradation performance was achieved at pH 4 and 5, while at pH 6 iron precipitation became relevant and the degradation rate was slightly slower. PFF has shown to be more efficient than the PF under the same pH (4) and iron concentration (2 mg L^-1). Moreover, even at near neutral pH (6), fluorine degradation was shown to be feasible by using ferrioxalate complexes.