Comparative Assessment of Antibiotic Residues Using Liquid Chromatography Coupled with Tandem Mass Spectrometry (LC-MS/MS) and a Rapid Screening Test in Raw Milk Collected from the North-Central Algerian Dairies

Mitigating antibiotics misuse in dairy farming systems and milk value chain market: Insights into practices, factors, and farmers education in Nyabihu district, Rwanda

The widespread misuse of antibiotics to combat bacterial infections in dairy farming is a global concern contributing to antimicrobial resistance (AMR). To gain insights within small-scale dairy farming, a study was conducted in Nyabihu district of Rwanda from September 2021 to April 2023 to assess practices and factors associated with antibiotic use, investigate antibiotic residues in cow milk and undertake a comprehensive training program to improve quality milk production. A mixed-methods approach, combining cross-sectional and longitudinal intervention studies, involved 42 regular dairy farmers from both open and zero-grazing systems delivering milk to the Union pour la Promotion des Cooperatives des Eleveurs en Nyabihu (UPROCENYA) milk collection center (MCC). Standardized questionnaires and farm interviews were conducted to assess antibiotic use practices while bulk tank milk samples from the same farmers were collected and tested for antibiotic residues using rapid tests over 16 months (8 months before and 8 months after training). Out of 451 bulk tank milk samples tested, 27 samples (6%) contained antibiotic residues, primarily tetracyclines (55.3%) and beta-lactams (44.7%). Before farmers training, 5182.75 l of milk were rejected monthly due to antibiotic residues. Following training, milk rejections decreased to 3192.75 l per month, reflecting 38.35% monthly decrease. However, no statistically significant difference was found by independent t-test (t = 1.441; p = 0.173) between milk rejected before and after training. 97.6% of interviewed farmers reported using antibiotics within six months preceding data collection, with 71.4% primarily used for disease treatment, notably targeting tick-borne diseases (34.0%). Alarming practices included administering antibiotics without referring samples for laboratory examination (100%), disregarding withdrawal periods (88.1%) and administering antibiotics without a veterinary doctor's prescription (85.7%). Factors contributing to these practices included limited farmer's knowledge on antibiotics, easy access to antibiotics in local agro-veterinary shops, and insufficient veterinary services. Antibiotic-laden milk was used to feed calves (38.6%), consumed at home (26.5%), and sold (12.0%). The observed misuse of antibiotics and disregard for antibiotic withdrawal periods pose significant threats to both milk quality and human health. The authors recommend that dairy farmers prioritize animal health monitoring and implementing biosecurity measures to prevent diseases and thus reduce antibiotic usage. Collaborative efforts among stakeholders are highly recommended to enhance capacity building for dairy farmers and support research initiatives. Furthermore, it is strongly suggested to strengthen regulations on the prudent use of antibiotics within the Rwandan food production system to curb antimicrobial resistance across both animal and human populations.

Aptamer-modified paper-based analytical devices for the detection of food hazards: Emerging applications and future perspective

Food analysis plays a critical role in assessing human health risks and monitoring food quality and safety. Currently, there is a pressing need for a reliable, portable, and quick recognition element for point-of-care testing (POCT) to better serve the demands of on-site food analysis. Aptamer-modified paper-based analytical devices (Apt-PADs) have excellent characteristics of high portability, high sensitivity, high specificity, and on-site detection, which have been widely used and concerned in the field of food safety. The article reviews the basic components and working principles of Apt-PADs, and introduces their representative applications detecting food hazards. Finally, the advantages, challenges, and future directions of Apt-PADs-based sensing performance are discussed, to provide new directions and insights for researchers to select appropriate Apt-PADs according to specific applications.

State-of-the-art nanosensors and kits for the detection of antibiotic residues in milk and dairy products

Antibiotic resistance is increasingly seen as a future concern, but antibiotics are still commonly used in animals, leading to their accumulation in humans through the food chain and posing health risks. The development of nanomaterials has opened up possibilities for creating new sensing strategies to detect antibiotic residues, resulting in the emergence of innovative nanobiosensors with different benefits like rapidity, simplicity, accuracy, sensitivity, specificity, and precision. Therefore, this comprehensive review provides pertinent and current insights into nanomaterials-based electrochemical/optical sensors for the detection of antibitic residues (ANBr) across milk and dairy products. Here, we first discuss the commonly used ANBs in real products, the significance of ANBr, and also their binding/biological properties. Then, we provide an overview of the role of using different nanomaterials on the development of advanced nanobiosensors like fluorescence-based, colorimetric, surface-enhanced Raman scattering, surface plasmon resonance, and several important electrochemical nanobiosensors relying on different kinds of electrodes. The enhancement of ANB electrochemical behavior for detection is also outlined, along with a concise overview of the utilization of (bio)recognition units. Ultimately, this paper offers a perspective on the future concepts of this research field and commercialized nanomaterial-based sensors to help upgrade the sensing techniques for ANBr in dairy products.

Simultaneous determination of five carbapenems, highly polar antibiotics, in milk by LC-MS/MS

The simultaneous determination of five carbapenems (biapenem, doripenem, ertapenem, imipenem, and meropenem) in raw and pasteurised bovine milk samples using LC-MS/MS was achieved and validated. Chromatographic separation was conducted on an InertSustain® AQ-C18 column using 0.1% formic acid in water and acetonitrile as the mobile phase. Target compounds were extracted using acetonitrile/water (20:80, v/v). After the removal of lipids with acetonitrile-saturated hexane, the dissolved protein was denatured with acetic acid. A portion of the supernatant was passed through an Oasis® PRiME HLB cartridge to remove the matrix. This novel method was validated in accordance with the Japanese validation guidelines and exhibited good trueness, ranging from 86.3% to 96.2%, using matrix-matched calibration curves. The relative standard deviation of repeatability ranged from 1.0% to 6.3%, and that of within-laboratory reproducibility ranged from 1.6% to 7.1%. The limit of quantification was 1.0 µg kg-1 for all analytes. None of the 60 milk samples commercially available in Tokyo contained any analytes. This novel method exhibited high-quality performance and can easily be implemented for the routine monitoring of carbapenems, which are highly polar antibiotics in milk.

Amino-functionalized Al-MOF modulated TpTt-COF with dual-emission for fluorescent and optosmart detecting tetracycline in food samples

Tetracycline residues in animal-derived food pose serious harm to human health, making it demanded to develop simple and sensitive method for detecting tetracycline. Herein, a dual-emission synchronous response fluorescence probe is reported based on amino-functionalized Al-MOF modulated TpTt-COF (donate as NMT). NMT exhibits excellent dual-emission at 455 and 575 nm under single excitation. Tetracycline is sensitively detected through quenching the dual-emission of NMT. NMT specifically recognizes tetracycline through intermolecular hydrogen bonding between -OH/-NH₂ of tetracycline and deprotonated O^-/-NH-/CN of NMT. A calibration curve is built between the fluorescence ratio and the tetracycline concentration with a detection limit of 0.014 μmol/L. NMT is employed to detect tetracycline in milk, pork and chicken, and displays satisfactory recoveries of 94.39-105.67%, respectively. The optosmart sensor based on NMT and smartphone has been constructed for visually detecting tetracycline. This method provides routes to construct MOF-COF fluorescence probes and has good prospects in food analysis.

Bi(Ⅲ) and Ce(Ⅳ) functionalized carbon nitride photocatalyst for antibiotic degradation: Synthesis, toxicity, and mechanism investigations

Graphite-phase carbon nitride (g-C₃N₄) has shown great potential for antibiotic wastewater treatment due to its unique electronic structure and corresponding to visible light. In this study, a series of Bi/Ce/g-C₃N₄ photocatalysts with different doping amount were developed by direct calcination method for Rhodamine B and sulfamethoxazole photocatalytic degradation. The experiment result shows that the photocatalytic performance of Bi/Ce/g-C₃N₄ catalysts were better than that of single component samples. Under the optimal experimental conditions, the degradation rates of RhB (20 min) and SMX (120 min) by 3Bi/Ce/g-C₃N₄ reached 98.3% and 70.5%, respectively. The theoretical calculation results of DFT show that after Bi and Ce doping modification, the band-gap width of g-C₃N₄ is reduced to 1.215 eV and carrier migration rate is greatly improved. The enhanced photocatalytic activity was mainly attributed to the capture of electrons after doping modification, which inhibition of photogenerated carriers recombination and reduced the gap width. The cyclic treatment experiment of sulfamethoxazole showed that Bi/Ce/g-C₃N₄ catalysts had good stability. Ecosar evaluation and leaching toxicity test showed that Bi/Ce/g-C₃N₄ can be safely used for wastewater treatment. This study provides a perfect strategy for modifying g-C₃N₄ and a new way to improve the photocatalytic performance.

Kill two birds with one stone: The management of hazardous waste and the preparation of efficient adsorbents for Pb(II) were realized by the pyrolysis of penicillin mycelial dreg

The penicillin industry produces a large amount of penicillin mycelial dreg (PMD), potentially causing severe environmental problems without proper treatment and disposal. To achieve the goals of PMD management, the present work explored the potential of PMD as a novel feedstock to produce biochar with very high adsorption performance. PMD was pyrolyzed at 400-800 °C to prepare biochars (PMD-BCs), and the physical and chemical properties were characterized using various methods. The adsorption capacities of Pb²⁺ on PMD-BC400, PMD-BC600, and PMD-BC800 were 37.04, 62.89, and 107.53 mg/g, respectively, at a temperature of 25 °C and pH of 5.0. The adsorption process of Pb²⁺ on PMD-BCs can be well described by the Langmuir model and pseudo-second-order model. Mineral precipitation, ion exchange, functional group complexation and Pb²⁺-π interaction were involved in the adsorption of Pb²⁺ on PMD-BCs. Moreover, mineral precipitation and ion exchange dominated Pb²⁺ sorption on PMD-BCs (84.71-92.73%). This study indicates the transition of PMD to biochar for Pb²⁺ adsorption is a promising method for PMD utilization.