A Gold Growth-Based Plasmonic ELISA for the Sensitive Detection of Fumonisin B1 in Maize

A comprehensive review of mycotoxins: Toxicology, detection, and effective mitigation approaches

Mycotoxins, harmful compounds produced by fungal pathogens, pose a severe threat to food safety and consumer health. Some commonly produced mycotoxins such as aflatoxins, ochratoxin A, fumonisins, trichothecenes, zearalenone, and patulin have serious health implications in humans and animals. Mycotoxin contamination is particularly concerning in regions heavily reliant on staple foods like grains, cereals, and nuts. Preventing mycotoxin contamination is crucial for a sustainable food supply. Chromatographic methods like thin layer chromatography (TLC), gas chromatography (GC), high-performance liquid chromatography (HPLC), and liquid chromatography coupled with a mass spectrometer (LC/MS), are commonly used to detect mycotoxins; however, there is a need for on-site, rapid, and cost-effective detection methods. Currently, enzyme-linked immunosorbent assays (ELISA), lateral flow assays (LFAs), and biosensors are becoming popular analytical tools for rapid detection. Meanwhile, preventing mycotoxin contamination is crucial for food safety and a sustainable food supply. Physical, chemical, and biological approaches have been used to inhibit fungal growth and mycotoxin production. However, new strains resistant to conventional methods have led to the exploration of novel strategies like cold atmospheric plasma (CAP) technology, polyphenols and flavonoids, magnetic materials and nanoparticles, and natural essential oils (NEOs). This paper reviews recent scientific research on mycotoxin toxicity, explores advancements in detecting mycotoxins in various foods, and evaluates the effectiveness of innovative mitigation strategies for controlling and detoxifying mycotoxins.

Ultrasensitive Lateral Flow Immunoassay for Fumonisin B1 Detection Using Highly Luminescent Aggregation-Induced Emission Microbeads

Lateral flow immunoassay (LFIA) based on fluorescent microbeads has attracted much attention for its use in rapid and accurate food safety monitoring. However, conventional fluorescent microbeads are limited by the aggregation-caused quenching effect of the loaded fluorophores, thus resulting in low signal intensity and insufficient sensitivity of fluorescent LFIA. In this study, a green-emitting fluorophore with an aggregation-induced emission (AIE) characteristic was encapsulated in polymer nanoparticles via an emulsification technique to form ultrabright fluorescent microbeads (denoted as AIEMBs). The prepared AIEMBs were then applied in a competitive LFIA (AIE-LFIA) as signal reporters for the rapid and highly sensitive screening of fumonisin B1 (FB1) in real corn samples. High sensitivity with a detection limit of 0.024 ng/mL for FB1 was achieved by the developed AIE-LFIA. Excellent selectivity, good accuracy, and high reliability of the AIE-LFIA were demonstrated, indicating a promising platform for FB1 screening.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

A direct competitive nanozyme-linked immunosorbent assay based on MnO2 nanosheets as a catalytic label for the determination of fumonisin B1

A direct competitive nanozyme-linked immunosorbent assay (dcNLISA) based on MnO₂ nanosheets (MnO₂ NSs) as a nanozyme label was developed for the highly sensitive determination of fumonisin B₁ (FB₁). MnO₂ NS-labeled fumonisin B₁-bovine serum albumin was easily synthesized as a competing antigen for the dcNLISA. And color changes derived from the MnO₂-3,3',5,5'-tetramethylbenzidine (TMB) system were exploited as the output signals of the dcNLISA. Several experimental parameters including the concentrations of the coating antibody, pH values, ionic strength and methanol concentration were optimized. Under the optimal conditions, the proposed method demonstrated a linear range (1.17-20.74 ng mL^-1) with a reliable correlation coefficient (R² = 0.9989), a satisfactory limit of detection (0.63 ng mL^-1) and high selectivity for the detection of FB₁. The recoveries of FB₁ in spiked corn and wheat samples were in the range of 85.31-108.16% with coefficients of variation (CVs) ranging from 6.14% to 9.23%. Meanwhile, the testing results showed good consistency (R² = 0.9892) between the developed dcNLISA and the reference method, liquid chromatography/mass spectrometry/mass spectrometry (LC-MS/MS) method. The proposed method was proven to be simple, sensitive, cost-effective and reliable for the screening of FB₁ in cereals.

Pumpless three-dimensional photo paper-based microfluidic analytical device for automatic detection of thioredoxin-1 using enzyme-linked immunosorbent assay

Microfluidic-based biosensors have been developed for their precise automatic reaction control. However, these biosensors require external devices that are difficult to transport and use. To overcome this disadvantage, our group made an easy-to-use, cheap, and light pumpless three-dimensional photo paper-based microfluidic analytical device (3D-μPAD; weight: 1.5 g). Unlike conventional paper-based microfluidic analytical devices, the 3D-μPAD can be used to control fluid flow in a 3D manner, thus allowing sophisticated multi-step reaction control. This device can control fluid flow speed and direction accurately using only the capillary-driven flow without an external device like a pump. The flow speed is controlled by the width of the microfluidic channel and its surface property. In addition, fluid speed control and 3D-bridge structure enable the control of fluid flow direction. Using these methods, multi-step enzyme-linked immunosorbent assay (ELISA) can be done automatically in sequence by injecting solutions (sample, washing, and enzyme's substrate) at the same time in the 3D-μPAD. All the steps can be performed in 14 min, and data can be analyzed immediately. To test this device, thioredoxin-1 (Trx-1), a biomarker of breast cancer, is used as the target. In the 3D-μPAD, it can detect 0-200 ng/mL of Trx-1, and the prepared 3D-μPAD Trx-1 sensor displays excellent selectivity. Moreover, by analyzing the concentration of Trx-1 in real patients and healthy individuals' blood serum samples using the 3D-μPAD, and comparing results to ELISA, it can be confirmed that the 3D-μPAD is a good tool for cancer diagnosis.

1 An HPLC-MS/MS Method Using a Multitoxin Clean-up Column for Analysis of Seven Mycotoxins in Aquafeeds

BACKGROUND

In Guangdong Province of China, the climate here is very wet, so there are many different fungus living in the aquatic feeds, which produce mycotoxins. These compounds contaminate agriculture products world-wide and represent a great threat to human health. It is necessary to determine their contamination level in aquatic feeds.

OBJECTIVE

A high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) method was developed for the quantitative analysis of aflatoxin B1, aflatoxin M1, T-2 toxin, HT-2 toxin, deoxynivalenol, ochratoxin, and zearalenone in the fish and shrimp feed.

METHODS

Samples were extracted with acetonitrile-water (V: V = 3:1), and degreased with acetonitrile-saturated hexane. Such obtained extract was cleaned up with a multitoxin column. The target compounds were separated on a C18 chromatographic column and analyzed simultaneously by electrospray ionization mass spectrometry in both positive or negative ion mode. Detected compounds were quantified by using the matrix-matched external standard method.

RESULTS

Under the optimized conditions, good linearities for the analytes in corresponding concentration range were obtained with correlation coefficients (r2) higher than 0.9948. LOD ranged from 1.83 to 12.63 μg/kg, and LOQ ranged from 5.49 to 37.89 μg/kg. Average recoveries for the target mycotoxins at three spiked levels ranged from 80.5% to 116.5% with RSD ranging from 2.4% to 10.4%. 23 real aquafeed samples were determined by this method, and 7 kinds of toxins were all detected.

CONCLUSIONS

Obtained results showed that developed method could be successfully applied for the simultaneous determination of mycotoxins in aquatic feeds.

Emerging electrochemical sensing and biosensing approaches for detection of Fumonisins in food samples

Fumonisins (FBs) can be found extensively in feedstuffs, foodstuffs, and crops. The consumption of the fumonisin-contaminated corn can result in esophageal cancer. In addition, the secondary metabolites of fungi termed mycotoxins may have some adverse effects on animals and humans such as estrogenicity, immunotoxicity, teratogenicity, mutagenicity, and carcinogenicity. Hence, developing sensitivity techniques for mycotoxins determination is of great importance. This paper reports the latest developments of nanomaterial-based electrochemical biosensing, apta-sensing, sensing, and immunosensing analyses to detect fumonisins. A concise study of the occurrence, legislations, toxicity, and distribution of FBs in levels monitoring was done. The techniques, different detection matrices, and approaches to highly selective and sensitive sensing methods were reviewed. The review also summarizes the salient features and the necessity of biosensing assessments in FBs detection, and diverse immobilization techniques. Furthermore, this review defined the performance of various electrochemical sensors using different detection elements couples with nanomaterials fabricated applying different detection elements coupled with nanomaterials (metal oxide nanoparticles (NPs), metal NPs, CNT, and graphene), the factors limiting progress, and the upcoming tasks in successful aptasensor fabrication with the functionalized nanomaterials.

Aptamer-based detection of fumonisin B1: A critical review

Mycotoxin contamination is a current issue affecting several crops and processed products worldwide. Among the diverse mycotoxin group, fumonisin B1 (FB1) has become a relevant compound because of its adverse effects in the food chain. Conventional analytical methods previously proposed to quantify FB1 comprise LC-MS, HPLC-FLD and ELISA, while novel approaches integrate different sensing platforms and fluorescently labelled agents in combination with antibodies. Nevertheless, such methods could be expensive, time-consuming and require experience. Aptamers (ssDNA) are promising alternatives to overcome some of the drawbacks of conventional analytical methods, their high affinity through specific aptamer-target binding has been exploited in various designs attaining favorable limits of detection (LOD). So far, two aptamers specific to FB1 have been reported, and their modified and shortened sequences have been explored for a successful target quantification. In this critical review spanning the last eight years, we have conducted a systematic comparison based on principal component analysis of the aptamer-based techniques for FB1, compared with chromatographic, immunological and other analytical methods. We have also conducted an in-silico prediction of the folded structure of both aptamers under their reported conditions. The potential of aptasensors for the future development of highly sensitive FB1 testing methods is emphasized.

Europium nanosphere-based fluorescence strip sensor for ultrasensitive and quantitative determination of fumonisin B1

Contamination of grains and related products by fumonisins (FBs) is increasingly becoming a serious food security issue. The aim of this work was to develop a europium fluorescent microsphere-based time-resolved fluorescence immunochromatographic assay (TRFICA) for FB₁ detection in different grains, including corn, corn flour, wheat, rice and brown rice. Standard curves for the five types of grain matrix were established, and showed good linearity (R² > 0.975), LOD of 8.26 μg kg^-1, and a wide working range of 13.81-1000 μg kg^-1. The recoveries of TRFICA for FB₁ detection ranged from 82.85-103.62% with variation coefficients of 1.92-15.33%. Two corn reference materials and other natural samples were tested using TRFICA. The same samples analyzed by liquid chromatography tandem mass spectrometry further confirmed the TRFICA results. The entire detection time of TRFICA was within 30 min. Thus, this developed TRFICA can be used for onsite detection and quantitation of FB₁ in grains.

Developments in mycotoxin analysis: an update for 2018-19

This review summarises developments on the analysis of various matrices for mycotoxins that have been published in the period from mid-2018 to mid-2019. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes, and zearalenone are covered in individual sections. Advances in sampling strategies are also discussed in a dedicated section. In addition, developments in multi-mycotoxin methods – including comprehensive mass spectrometric-based methods as well as simple immunoassays – are also reviewed. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.