Electronic Nose for the Rapid Detection of Deoxynivalenol in Wheat Using Classification and Regression Trees

Recent advances in signal processing algorithms for electronic noses

Electronic nose (e-nose) technology has emerged as a pivotal tool in various domains, which has been widely utilized for odor identification, concentration evaluation, and prediction tasks. This review provides a comprehensive survey on the most recent advances in the development of e-nose systems and their algorithmic applications, emphasizing the roles of various methodologies and deep learning technologies in odor classification and concentration forecasting. Additionally, we delve into model evaluation methods, including multidimensional performance assessment and cross-validation. Future trends encompass broader application domains, advanced drift correction techniques, comprehensive multifactorial analysis, and enhanced capabilities for dealing with unknown interferents. These trends are set to propel significant breakthroughs in e-nose technology within scientific research and practical applications, solidifying the e-nose system as a crucial tool in many areas such as environmental monitoring, biomedicine, and public safety.

Detection of Mycotoxin Contamination in Foods Using Artificial Intelligence: A Review

Mycotoxin contamination of foods is a major concern for food safety and public health worldwide. The contamination of agricultural commodities employed by humankind with mycotoxins (toxic secondary metabolites of fungi) is a major risk to the health of the human population. Common methods for mycotoxin detection include chromatographic separation, often combined with mass spectrometry (accurate but time-consuming to prepare the sample and requiring skilled technicians). Artificial intelligence (AI) has been introduced as a new technique for mycotoxin detection in food, providing high credibility and accuracy. This review article provides an overview of recent studies on the use of AI methods for the discovery of mycotoxins in food. The new approach demonstrated that a variety of AI technologies could be correlated. Deep learning models, machine learning algorithms, and neural networks were implemented to analyze elaborate datasets from different analytical platforms. In addition, this review focuses on the advancement of AI to work concomitantly with smart sensing technologies or other non-conventional techniques such as spectroscopy, biosensors, and imaging techniques for rapid and less damaging mycotoxin detection. We question the requirement for large and diverse datasets to train AI models, discuss the standardization of analytical methodologies, and discuss avenues for regulatory approval of AI-based approaches, among other top-of-mind issues in this domain. In addition, this research provides some interesting use cases and real commercial applications where AI has been able to outperform other traditional methods in terms of sensitivity, specificity, and time required. This review aims to provide insights for future directions in AI-enabled mycotoxin detection by incorporating the latest research results and stressing the necessity of multidisciplinary collaboration among food scientists, engineers, and computer scientists. Ultimately, the use of AI could revolutionize systems monitoring mycotoxins, improving food safety and safeguarding global public health.

Distinguishing between Wheat Grains Infested by Four Fusarium Species by Measuring with a Low-Cost Electronic Nose

An electronic device based on the detection of volatile substances was developed in response to the need to distinguish between fungal infestations in food and was applied to wheat grains. The most common pathogens belong to the fungi of the genus Fusarium: F. avenaceum, F. langsethiae, F. poae, and F. sporotrichioides. The electronic nose prototype is a low-cost device based on commercially available TGS series sensors from Figaro Corp. Two types of gas sensors that respond to the perturbation are used to collect signals useful for discriminating between the samples under study. First, an electronic nose detects the transient response of the sensors to a change in operating conditions from clean air to the presence of the gas being measured. A simple gas chamber was used to create a sudden change in gas composition near the sensors. An inexpensive pneumatic system consisting of a pump and a carbon filter was used to supply the system with clean air. It was also used to clean the sensors between measurement cycles. The second function of the electronic nose is to detect the response of the sensor to temperature disturbances of the sensor heater in the presence of the gas to be measured. It has been shown that features extracted from the transient response of the sensor to perturbations by modulating the temperature of the sensor heater resulted in better classification performance than when the machine learning model was built from features extracted from the response of the sensor in the gas adsorption phase. By combining features from both phases of the sensor response, a further improvement in classification performance was achieved. The E-nose enabled the differentiation of F. poae from the other fungal species tested with excellent performance. The overall classification rate using the Support Vector Machine model reached 70 per cent between the four fungal categories tested.

Recent advances and challenges in the analysis of natural toxins

Natural toxins (NTs) are poisonous secondary metabolites produced by living organisms developed to ward off predators. Especially low molecular weight NTs (MW<∼1 kDa), such as mycotoxins, phycotoxins, and plant toxins, are considered an important and growing food safety concern. Therefore, accurate risk assessment of food and feed for the presence of NTs is crucial. Currently, the analysis of NTs is predominantly performed with targeted high pressure liquid chromatography tandem mass spectrometry (HPLC-MS/MS) methods. Although these methods are highly sensitive and accurate, they are relatively expensive and time-consuming, while unknown or unexpected NTs will be missed. To overcome this, novel on-site screening methods and non-targeted HPLC high resolution mass spectrometry (HRMS) methods have been developed. On-site screening methods can give non-specialists the possibility for broad "scanning" of potential geographical regions of interest, while also providing sensitive and specific analysis at the point-of-need. Non-targeted chromatography-HRMS methods can detect unexpected as well as unknown NTs and their metabolites in a lab-based approach. The aim of this chapter is to provide an insight in the recent advances, challenges, and perspectives in the field of NTs analysis both from the on-site and the laboratory perspective.

Analysis of Wheat Grain Infection by Fusarium Mycotoxin-Producing Fungi Using an Electronic Nose, GC-MS, and qPCR

Fusarium graminearum and F. culmorum are considered some of the most dangerous pathogens of plant diseases. They are also considerably dangerous to humans as they contaminate stored grain, causing a reduction in yield and deterioration in grain quality by producing mycotoxins. Detecting Fusarium fungi is possible using various diagnostic methods. In the manuscript, qPCR tests were used to determine the level of wheat grain spoilage by estimating the amount of DNA present. High-performance liquid chromatography was performed to determine the concentration of DON and ZEA mycotoxins produced by the fungi. GC-MS analysis was used to identify volatile organic components produced by two studied species of Fusarium. A custom-made, low-cost, electronic nose was used for measurements of three categories of samples, and Random Forests machine learning models were trained for classification between healthy and infected samples. A detection performance with recall in the range of 88-94%, precision in the range of 90-96%, and accuracy in the range of 85-93% was achieved for various models. Two methods of data collection during electronic nose measurements were tested and compared: sensor response to immersion in the odor and response to sensor temperature modulation. An improvement in the detection performance was achieved when the temperature modulation profile with short rectangular steps of heater voltage change was applied.

Low-Cost Pocket Fluorometer and Chemometric Tools for Green and Rapid Screening of Deoxynivalenol in Durum Wheat Bran

Cereal crops are frequently contaminated by deoxynivalenol (DON), a harmful type of mycotoxin produced by several Fusarium species fungi. The early detection of mycotoxin contamination is crucial for ensuring safety and quality of food and feed products, for preventing health risks and for avoiding economic losses because of product rejection or costly mycotoxin removal. A LED-based pocket-size fluorometer is presented that allows a rapid and low-cost screening of DON-contaminated durum wheat bran samples, without using chemicals or product handling. Forty-two samples with DON contamination in the 40-1650 µg/kg range were considered. A chemometric processing of spectroscopic data allowed distinguishing of samples based on their DON content using a cut-off level set at 400 µg/kg DON. Although much lower than the EU limit of 750 µg/kg for wheat bran, this cut-off limit was considered useful whether accepting the sample as safe or implying further inspection by means of more accurate but also more expensive standard analytical techniques. Chemometric data processing using Principal Component Analysis and Quadratic Discriminant Analysis demonstrated a classification rate of 79% in cross-validation. To the best of our knowledge, this is the first time that a pocket-size fluorometer was used for DON screening of wheat bran.

Sample-to-answer sensing technologies for nucleic acid preparation and detection in the field

Efficient sample preparation and accurate disease diagnosis under field conditions are of great importance for the early intervention of diseases in humans, animals, and plants. However, in-field preparation of high-quality nucleic acids from various specimens for downstream analyses, such as amplification and sequencing, is challenging. Thus, developing and adapting sample lysis and nucleic acid extraction protocols suitable for portable formats have drawn significant attention. Similarly, various nucleic acid amplification techniques and detection methods have also been explored. Combining these functions in an integrated platform has resulted in emergent sample-to-answer sensing systems that allow effective disease detection and analyses outside a laboratory. Such devices have a vast potential to improve healthcare in resource-limited settings, low-cost and distributed surveillance of diseases in food and agriculture industries, environmental monitoring, and defense against biological warfare and terrorism. This paper reviews recent advances in portable sample preparation technologies and facile detection methods that have been / or could be adopted into novel sample-to-answer devices. In addition, recent developments and challenges of commercial kits and devices targeting on-site diagnosis of various plant diseases are discussed.

Analysis of the Response Signals of an Electronic Nose Sensor for Differentiation between Fusarium Species

Fusarium is a genus of fungi found throughout the world. It includes many pathogenic species that produce toxins of agricultural importance. These fungi are also found in buildings and the toxins they spread can be harmful to humans. Distinguishing Fusarium species can be important for selecting effective preventive measures against their spread. A low-cost electronic nose applying six commercially available TGS-series gas sensors from Figaro Inc. was used in our research. Different modes of operation of the electronic nose were applied and compared, namely, gas adsorption and desorption, as well as modulation of the sensor's heating voltage. Classification models using the random forest technique were applied to differentiate between measured sample categories of four species: F. avenaceum, F. culmorum, F. greaminarum, and F. oxysporum. In our research, it was found that the mode of operation with modulation of the heating voltage had the advantage of collecting data from which features can be extracted, leading to the training of machine learning classification models with better performance compared to cases where the sensor's response to the change in composition of the measured gas was exploited. The optimization of the data collection time was investigated and led to the conclusion that the response of the sensor at the beginning of the heating voltage modulation provides the most useful information. For sensor operation in the mode of gas desorption/absorption (i.e., modulation of the gas composition), the optimal time of data collection was found to be longer.

E-Nose Technology for Mycotoxin Detection in Feed: Ready for a Real Context in Field Application or Still an Emerging Technology?

Mycotoxin risk in the feed supply chain poses a concern to animal and human health, economy, and international trade of agri-food commodities. Mycotoxin contamination in feed and food is unavoidable and unpredictable. Therefore, monitoring and control are the critical points. Effective and rapid methods for mycotoxin detection, at the levels set by the regulations, are needed for an efficient mycotoxin management. This review provides an overview of the use of the electronic nose (e-nose) as an effective tool for rapid mycotoxin detection and management of the mycotoxin risk at feed business level. E-nose has a high discrimination accuracy between non-contaminated and single-mycotoxin-contaminated grain. However, the predictive accuracy of e-nose is still limited and unsuitable for in-field application, where mycotoxin co-contamination occurs. Further research needs to be focused on the sensor materials, data analysis, pattern recognition systems, and a better understanding of the needs of the feed industry for a safety and quality management of the feed supply chain. A universal e-nose for mycotoxin detection is not realistic; a unique e-nose must be designed for each specific application. Robust and suitable e-nose method and advancements in signal processing algorithms must be validated for specific needs.