Adsorption of Aqueous As (III) in Presence of Coexisting Ions by a Green Fe-Modified W Zeolite

Exploring zeolite-based composites in adsorption and photocatalysis for toxic wastewater treatment: Preparation, mechanisms, and future perspectives

Water scarcity has become a critical global concern exacerbated by population growth, globalization, and industrial expansion, resulting in the production of wastewater containing a wide array of contaminants. Tackling this challenge necessitates the adoption of innovative materials and technologies for effective wastewater treatment. This review article provides a comprehensive exploration of the preparation, applications, mechanisms, and economic environmental analysis of zeolite-based composites in wastewater treatment. Zeolite, renowned for its versatility and porous nature, is of paramount importance due to its exceptional properties, including high surface area, ion exchange capability, and adsorption capacity. Various synthetic methods for zeolite-based composites are discussed. The utilization of zeolites in wastewater treatment, particularly in adsorption and photocatalysis, is thoroughly investigated. The significance of zeolite in adsorption and its role in the photocatalytic degradation of pollutants are examined, along with its applications in treating volatile organic compounds (VOCs), dye wastewater, oil-field wastewater, and radioactive waste. Mechanisms underlying zeolite-based adsorption and photocatalysis, including physical and chemical adsorption, ion exchange, and surface modification, are elucidated. Additionally, the role of micropores in the adsorption process is explored. Furthermore, the review delves into regeneration and desorption studies of zeolite-based composites, crucial for sustainable wastewater treatment practices. Economic and environmental analyses are conducted to assess the feasibility and sustainability of employing zeolite-based composites in wastewater treatment applications. Future recommendations are provided to guide further research and development in the field of zeolite-based composites, aiming to enhance wastewater treatment efficiency and environmental sustainability. By exploring the latest advancements and insights into zeolite-based nanocomposites, this paper aims to contribute to the development of more efficient and sustainable wastewater treatment strategies. The integration of zeolite-based materials in wastewater treatment processes shows promise for mitigating water pollution and addressing water scarcity challenges, ultimately contributing to environmental preservation and public health protection.

Efficient loading of nano Mn particles on calcined laterite soil (Lt-nMn) for higher removal of As(III) ions from groundwater: adsorption and eco-scale analysis

Occurrence of arsenic in the groundwater has become a cause for concern in many countries. The presence of As(III) species in the groundwater had been one of the biggest challenges for the water workers especially in the southeast Asian countries. Nano based adsorption techniques are gaining attention among researchers for the removal of arsenic ions. However, synthesis of nano-adsorbents is a costly affair. Therefore, the present study utilized the cheap and readily available laterite soil as a base material for nano coating. Nano sized manganese (nMn) particles were synthesized by chemical reduction method and later coated on calcined laterite (Lt-nMn). Coating with 0.1 M nMn provided the best As(III) removal efficiency. The prepared material was characterised for its morphological and surface properties. Phase analysis using XRD (X-ray diffraction) showed the presence of zero valent manganese species, which assisted in adsorption. Adsorption studies were conceded by selecting the different affecting parameters such as contact time, concentration, dose, temperature, and pH. Very high removal in less time regime led to the investigation of the oxidation mechanism. Phosphate and sulphate anions insignificantly reduced the removal efficiency. Langmuir model for the sorption isotherms and pseudo-second order kinetic model for the sorption kinetics symbolized the experimental data. Sustainability studies in terms of eco-scaling and cost analysis were performed for the applied method of production of the nano materials. Adsorber design analysis was also conducted to estimate the required amount of Lt-nMn particles for achieving the desired equilibrium As(III) concentration.

Synthesis and Surface Modification of Small Pore Size Zeolite W for Improving Removal Efficiency of Anionic Contaminants from Water

The presence of regulated inorganic contaminants in water such as AsO₄^3- and PO₄^3- anions, is becoming a relevant environmental research topic. The harm that these anions cause to human health and the ecosystem have been reported in several works. The adsorption processes using low-cost materials, such as zeolites, have proven to be an option to removal hazardous contaminants from water. The coal fly ash, a waste from thermoelectrical plants, offers a raw pollutant material to synthesis an effective adsorbent (Zeolite W). In this research was studied the removal of arsenic and phosphates anions from water, applying a functionalized by iron and zirconium Zeolite W, which was modified using a fast and efficient process through microwave-assisted method (1 min at 150°C). The obtained Zeolite W did not show significant changes in its structure and morphology. The maximum adsorption capacity (Qm expressed in mg g^-1) was found to be 42.31 (Iron-zirconium-zeolite) and 27.82 (Iron-zeolite) for AsO₄^3-, while it reached 50.89 for PO₄^3- using Zirconium-zeolite. Results showed that functionalized zeolites are efficient adsorbents for hazardous anionic species; therefore, it could be useful for aqueous effluents remediation.

Review: Efficiently performing periodic elements with modern adsorption technologies for arsenic removal

Arsenic (As) toxicity is a global phenomenon, and it is continuously threatening human life. Arsenic remains in the Earth's crust in the forms of rocks and minerals, which can be released into water. In addition, anthropogenic activity also contributes to increase of As concentration in water. Arsenic-contaminated water is used as a raw water for drinking water treatment plants in many parts of the world especially Bangladesh and India. Based on extensive literature study, adsorption is the superior method of arsenic removal from water and Fe is the most researched periodic element in different adsorbent. Oxides and hydroxides of Fe-based adsorbents have been reported to have excellent adsorptive capacity to reduce As concentration to below recommended level. In addition, Fe-based adsorbents were found less expensive and not to have any toxicity after treatment. Most of the available commercial adsorbents were also found to be Fe based. Nanoparticles of Fe-, Ti-, Cu-, and Zr-based adsorbents have been found superior As removal capacity. Mixed element-based adsorbents (Fe-Mn, Fe-Ti, Fe-Cu, Fe-Zr, Fe-Cu-Y, Fe-Mg, etc.) removed As efficiently from water. Oxidation of AsO₃^3- to AsO₄^3-and adsorption of oxidized As on the mixed element-based adsorbent occurred by different adsorbents. Metal organic frameworks have also been confirmed as good performance adsorbents for As but had a limited application due to nano-crystallinity. However, using porous materials having extended surface area as carrier for nano-sized adsorbents could alleviate the separation problem of the used adsorbent after treatment and displayed outstanding removal performances.

Characterization of Fe(III) Adsorption onto Zeolite and Bentonite

In this study, the adsorption of Fe(III) from aqueous solution on zeolite and bentonite was investigated by combining batch adsorption technique, Atomic adsorption spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses. Although iron is commonly found in water and is an essential bioelement, many industrial processes require efficient removal of iron from water. Two types of zeolite and two types of bentonite were used. The results showed that the maximum adsorption capacities for removal of Fe (III) by Zeolite Micro 20, Zeolite Micro 50, blue bentonite, and brown bentonite were 10.19, 9.73, 11.64, and 16.65 mg.g⁻¹, respectively. Based on the X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence (XRF) analyses of the raw samples and the solid residues after sorption at low and high initial Fe concentrations, the Fe content is different in the surface layer and in the bulk of the material. In the case of lower initial Fe concentration (200 mg.dm⁻³), more than 95% of Fe is adsorbed in the surface layer. In the case of higher initial Fe concentration (4000 mg.dm⁻³), only about 45% and 61% of Fe is adsorbent in the surface layer of zeolite and bentonite, respectively; the rest is adsorbed in deeper layers.

Arsenic Removal from Water by Green Synthesized Magnetic Nanoparticles

Magnetite nanoparticles were synthesized by a simple and ecofriendly method using onion peel (MNp-OP) and corn silk extract (MNp-CS), in order to develop new low-cost adsorbents for arsenic removal from groundwater. As a point of comparison, magnetite nanoparticles were also synthesized with a conventional chemical process (MNp-CO). The antioxidant potential of onion peel and corn silk extracts was determined using ferric reducing antioxidant power (FRAP) and free radical (DPPH) scavenging assays, including the total phenolics, flavonoids and tannins contents. The synthesized magnetite nanoparticles were characterised using different techniques (Scanning electron microscope/Energy dispersive spectroscopy (SEM/EDS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) surface area analyzer). The adsorption capacity of MNp-OP and MNp-CS and the arsenic removal mechanism of these novel adsorbents was investigated through kinetic and equilibrium experiments and their corresponding mathematical models. Characterisation of MNp-OP and MNp-CS shows high BET specific surface areas of 243 m2/g and 261 m2/g, respectively. XRD and FTIR analysis confirmed the formation and presence of magnetite nanoparticles. The arsenic adsorption mechanism on MNp-OP, MNp-CS and MNp-CO involves chemisorption, intraparticle and external diffusion. Maximal adsorption capacities of MNp-OP, MNp-CS and MNp-CO were 1.86, 2.79, and 1.30 mg/g respectively. The green synthesis applied using onion peel and corn silk extracts was cost effective and environmentally friendly, and results in adsorbents with a high capacity for arsenic and magnetic properties, making them a very promising alternative approach in the treatment of arsenic contaminated groundwater.

Arsenic Removal from Water by Adsorption onto Iron Oxide/Nano-Porous Carbon Magnetic Composite

This study aimed to develop magnetic Fe3O4/sugarcane bagasse activated carbon composite for the adsorption of arsenic (III) from aqueous solutions. Activated carbon (AC) was prepared from sugarcane bagasse by chemical activation using H3PO4 as an activating agent at 400 °C. To enhance adsorption capacity for arsenic, the resultant AC was composited with Fe3O4 particles by facile one-pot hydrothermal treatment. This method involves mixing the AC with aqueous solution of iron (II) chloride tetrahydrate, polyvinyl pyrrolidone (PVP), and ethanol. Batch adsorption experiments were conducted for the adsorption of As (III) onto the composite. The effects of pH, adsorbent dosage, and contact time on the arsenic adsorption were studied. The result showed that the composite could remove the arsenic from the water far more effectively than the plain AC. The highest percentage of arsenic removal was found at pH at 8, adsorbent dose of 1.8 g/L, and contact time of 60 min. Langmuir and Freundlich adsorption isotherm was used to analyze the equilibrium experimental data. Langmuir model showed the best fit compared to the Freundlich model with a maximal capacity of 6.69 mg/g. These findings indicated that magnetic Fe3O4/sugarcane bagasse AC composite could be potentially applied for adsorptive removal of arsenic (III) from aqueous solutions.

Optimization Study for the Desorption of Methylene Blue Dye from Clay Based Adsorbent Coating

Batch desorption experiments of methylene blue (MB) dye from a clay adsorbent coating were carried out to evaluate the maximum desorption conditions. Combination of thermal and chemical regeneration techniques were used for the desorption process. The desorption of MB was found to be 70% using an HCl solvent after heating adsorbent coating at 160 °C. The optimization study was carried out to identity the optimum desorption conditions using MINITAB 14 software. The individual and interaction effects of three factors, temperature, dye concentration and contact time for desorption of dye were determine by applying response surface methodology (RSM). The optimization results showed that all three factors have main effects whereas the interaction of concentration–time is significant as compared to other interactions. The findings exhibit a maximum desorption efficiency 23 mg/g at 60 °C for 100 mg/L of dye and 150 min of contact time.