The Integration of Multivariate Statistical Approaches, Hyperspectral Reflectance, and Data-Driven Modeling for Assessing the Quality and Suitability of Groundwater for Irrigation

Fuzzy logic, geostatistics, and multiple linear models to evaluate irrigation metrics and their influencing factors in a drought-prone agricultural region

The quality of water used for irrigation is one of the major threats to maintaining the long-term sustainability of agricultural practices. Although some studies have addressed the suitability of irrigation water in different parts of Bangladesh, the irrigation water quality in the drought-prone region has yet to be thoroughly studied using integrated novel approaches. This study aims to assess the suitability of irrigation water in the drought-prone agricultural region of Bangladesh using traditional irrigation metrics such as sodium percentage (NA%), magnesium adsorption ratio (MAR), Kelley's ratio (KR), sodium adsorption ratio (SAR), total hardness (TH), permeability index (PI), and soluble sodium percentage (SSP), along with novel irrigation indices such as irrigation water quality index (IWQI) and fuzzy irrigation water quality index (FIWQI). Thirty-eight water samples were taken from tube wells, river systems, streamlets, and canals in agricultural areas, then analyzed for cations and anions. The multiple linear regression model predicted that SAR (0.66), KR (0.74), and PI (0.84) were the primary important elements influencing electrical conductivity (EC). Based on the IWQI, all water samples fall into the "suitable" category for irrigation. The FIWQI suggests that 75% of the groundwater and 100% of the surface water samples are excellent for irrigation. The semivariogram model indicates that most irrigation metrics have moderate to low spatial dependence, suggesting strong agricultural and rural influence. Redundancy analysis shows that Na+, Ca2+, Cl-, K+, and HCO3- in water increase with decreasing temperature. Surface water and some groundwater in the southwestern and southeastern parts are suitable for irrigation. The northern and central parts are less suitable for agriculture because of elevated K+ and Mg2+ levels. This study determines irrigation metrics for regional water management and pinpoints suitable areas in the drought-prone region, which provides a comprehensive understanding of sustainable water management and actionable steps for stakeholders and decision-makers.

Assessment of hydrogeochemistry in groundwater using water quality index model and indices approaches

Groundwater resources around the world required periodic monitoring in order to ensure the safe and sustainable utilization for humans by keeping the good status of water quality. However, this could be a daunting task for developing countries due to the insufficient data in spatiotemporal resolution. Therefore, this research work aimed to assess groundwater quality in terms of drinking and irrigation purposes at the adjacent part of the Rooppur Nuclear Power Plant (RNPP) in Bangladesh. For the purposes of achieving the aim of this study, nine groundwater samples were collected seasonally (dry and wet season) and seventeen hydro-geochemical indicators were analyzed, including Temperature (Temp.), pH, electrical conductivity (EC), total dissolved solids (TDS), total alkalinity (TA), total hardness (TH), total organic carbon (TOC), bicarbonate (HCO3-), chloride (Cl-), phosphate (PO43-), sulfate (SO42-), nitrite (NO2-), nitrate (NO3-), sodium (Na+), potassium (K+), calcium (Ca2+) and magnesium (Mg2+). The present study utilized the Canadian Council of Ministers of the Environment water quality index (CCME-WQI) model to assess water quality for drinking purposes. In addition, nine indices including EC, TDS, TH, sodium adsorption ratio (SAR), percent sodium (Na%), permeability index (PI), Kelley's ratio (KR), magnesium hazard ratio (MHR), soluble sodium percentage (SSP), and Residual sodium carbonate (RSC) were used in this research for assessing the water quality for irrigation purposes. The computed mean CCME-WQI score found higher during the dry season (ranges 48 to 74) than the wet season (ranges 40 to 65). Moreover, CCME-WQI model ranked groundwater quality between the "poor" and "marginal" categories during the wet season implying unsuitable water for human consumption. Like CCME-WQI model, majority of the irrigation index also demonstrated suitable water for crop cultivation during dry season. The findings of this research indicate that it requires additional care to improve the monitoring programme for protecting groundwater quality in the RNPP area. Insightful information from this study might be useful as baseline for national strategic planners in order to protect groundwater resources during the any emergencies associated with RNPP.

Fuzzy-based global water quality assessment and water quality cells identification using satellite data

The water environmental impact assessment and management programs increasingly rely on accurate and quantitative estimates of water quality parameters through remote sensing, owing to the limitation of the time-consuming field-based approaches. Numerous studies have utilised the remote-derived water-quality products and existing water quality index WQI models, but they are typically site-specific and yield significant errors for the accurate assessment and monitoring of coastal and inland water bodies. This study presents a generalized WQI model that incorporates a flexible number of parameters, simplifying them to produce comprehensive water quality index values with the fuzzy logic approach. To derive these index values, three major water quality parameters such as Chl, TSS and aCDOM443 were estimated using new remote-sensing models, and the corresponding indices Trophic State Index (TSI), Total Suspended Solids Index (TSSI) and CDOM Index (CI) were produced by a generalized index model. Finally, WQI products were derived based on the Mamdani-based Fuzzy Inference System (FIS) and individual contribution of the water quality parameters to WQI was analysed to establish 'Water Quality Cells' WQcells, which are represented by the dominant WQ parameter. The new models were tested on MODIS-Aqua and Sentinel-3 OLCI data in different regional and global oceanic waters. Further, a time series analysis was performed in regional coastal oceanic waters (along the Indian coast) to study the seasonal variations of individual water quality parameters and WQI over the period from 2011 to 2020. The results demonstrated that the FIS is efficient in handling the parameters with varying units and their relative importance. The water quality cells were identified in the bloom-dominated (Arabian Sea), TSS-dominated (Point Calimere, India and Yangtze River estuary, China) and CDOM-dominated (South Carolina coast, USA) regions. The time series analysis revealed that the water quality of the Indian coast exhibits cyclic seasonal variations due to the annual occurrence of the south-west and north-east monsoons. These results are critical for monitoring and assessing the quality of surface waters in coastal and inland environments and enabling water resources managers to formulate and implement management plans for a variety of water bodies cost-effectively.

Hydrogeochemical assessment of carcinogenic and non-carcinogenic health risks of potentially toxic elements in aquifers of the Hindukush ranges, Pakistan: insights from groundwater pollution indexing, GIS-based, and multivariate statistical approaches

Globally, potentially toxic elements (PTEs) and bacterial contamination pose health hazards, persistency, and genotoxicity in the groundwater aquifer. This study evaluates PTE concentration, carcinogenic and noncarcinogenic health hazards, groundwater quality indexing (GWQI-model), source provenance, and fate distribution in the groundwater of Hindukush ranges, Pakistan. The new estimates of USEPA equations record new research dimensions for carcinogenic and noncarcinogenic hazards. The principal component analysis (PCA), mineral phases, and spatial distribution determine groundwater contamination and its impacts. The average concentrations of PTEs, viz., Cd, Cu, Co, Fe, Pb, and Zn, were 0.06, 0.27, 0.07, 0.55, 0.05, and 0.19 mg/L, and E. coli, F. coli, and P. coli were 27.5, 24.0, and 19.0 CFU/100 ml. Moreover, the average values of basic minerals, viz., anhydrite, aragonite, calcite, dolomite, gypsum, halite, and hydroxyl apatite, were 0.4, 2.4, 2.6, 5.1, 0.6, and - 4.0, 11.2, and PTE minerals like monteponite, tenorite, cuprite, cuprous ferrite, cupric ferrite, ferrihydrite, goethite, hematite, lepidocrocite, maghemite, magnetite, massicot, minium, litharge, plattnerite, and zincite were - 5.5, 2.23, 4.65, 18.56, 20.0, 4.84, 7.54, 17.46, 6.66, 9.67, 22.72, - 3.36, 22.9, 3.16, - 18.0, and 1.46. The groundwater showed carcinogenic and non-carcinogenic health hazards for children and adults. The GWQI-model showed that 58.3% of samples revealed worse water quality. PCA revealed rock weathering, mineral dissolution, water-rock interaction, and industrial effluents as the dominant factors influencing groundwater chemistry. Carbonate weathering and ion exchange play vital roles in altering CaHCO3 type to NaHCO3 water. In this study, E. coli, F. coli, P. coli, EC, turbidity, TSS, PO43─, Na+, Mg+2, Ca+2, Cd, Co, Fe, and Pb have exceeded the World Health Organization (WHO) guidelines. The carcinogenic and non-carcinogenic impacts of PTEs and bacterial contamination declared that the groundwater is unfit for drinking and domestic purposes.

Use of Hyperspectral Reflectance and Water Quality Indices to Assess Groundwater Quality for Drinking in Arid Regions, Saudi Arabia

Combining hydrogeochemical characterization and a hyperspectral reflectance measurement can provide knowledge for groundwater security under different conditions. In this study, comprehensive examinations of 173 groundwater samples were carried out in Makkah Al-Mukarramah Province, Saudi Arabia. Physicochemical parameters, water quality indices (WQIs), and spectral reflectance indices (SRIs) were combined to investigate water quality and controlling factors using multivariate modeling techniques, such as partial least-square regression (PLSR) and principal component regression (PCR). To measure water quality status, the drinking water quality index (DWQI), total dissolved solids (TDS), heavy metal index (HPI), contamination degree (Cd), and pollution index (PI) were calculated. Standard analytical methods were used to assess nineteen physicochemical parameters. The typical values of ions and metals were as follows: Na2+ > Ca2+ > Mg2+ > K+, Cl− > SO42− > HCO3− > NO3− > CO32−; and Cu > Fe > Al > Zn > Mn > Ni, respectively. The hydrogeochemical characteristics of the examined groundwater samples revealed that Ca-HCO3, Na-Cl, mixed Ca-Mg-Cl-SO4, and Na-Ca-HCO3 were the main mechanisms governing groundwater chemistry and quality under the load of seawater intrusion, weathering, and water-rock interaction. According to the WQIs results, the DWQI values revealed that 2.5% of groundwater samples were categorized as excellent, 18.0% as good, 28.0% as poor, 21.5% as extremely poor, and 30.0% as unfit for drinking. The HPI and Cd values revealed that all groundwater samples had a low degree of contamination and better quality. Furthermore, the PI values showed that the groundwater resources were not affected by metals but were slightly affected by Mn in Wadi Fatimah due to rock–water interaction. Linear regression models demonstrated the significant relationships for the majority of SRIs paired with DWQI (R varied from −0.40 to 0. 75), and with TDS (R varied from 0.46 to 0.74) for the studied wadies. In general, the PLSR and PCR models provide better estimations for DWQI and TDS than the individual SRI. In conclusion, the grouping of WQIs, SRIs, PLSR, PCR, and GIS tools provides a clear image of groundwater suitability for drinking and its controlling elements.

Evaluation of groundwater quality for irrigation water supply using multi-criteria decision-making techniques and GIS in an agroeconomic tract of Lower Ganga basin, India

Groundwater irrigation has evolved the monocropping cultivation pattern to multi-cropping, especially in many arid/semi-arid tracts globally. Irrigation practices with the groundwater of poor quality can limit the selection of the crop, reduce crop yields and degrade the soil quality. The present study has been undertaken to identify the hydrogeochemical phenomena of groundwater systems in the south-western Birbhum district, India and to analyze groundwater suitability for irrigation during the pre-and post-monsoon cycles by adopting the Irrigation Water Quality Index (IWQI) using Multivariate Factor Analysis along with some traditional methods viz. sodium adsorption ratio, sodium percentage, magnesium hazards, residual sodium bicarbonate (RSBC) and carbonate (RSC), Wilcox's and USSL diagrams, permeability index and Kelly's index. The hydrogeochemical analysis revealed that chemical weathering and evaporation are predominant in the aquifer systems. Groundwater quality reflected soil salinity, sodicity and magnesium hazards risks and water toxicity to the sensitive plants at 0-46.4% of the post-monsoon samples and 0-38.4% of the pre-monsoon samples based on the individual traditional methods whereas about 97.73-98.88% of the total area was classified as moderate to severely unsuitable for irrigation during both seasons when integrated multiple parameters using the IWQI method. Prolonged use of such groundwater for irrigation is susceptible to causing moderate to severe infiltration problems at a greater extent of the study area. The study recommends adaptation of salinity, sodicity and RSC/RSBC reduction procedures (e.g., the use of acid and gypsum amendments in the irrigation lands and through water blending) and advanced irrigation practices (viz. drips, sprinklers and micro irrigations) to prevent soil degradation and increase crops productivity. Adopting Managed Aquifer Recharge procedures as well as rainwater harvesting in the areas bearing unsuitable water quality can dilute the ionic concentrations of the groundwater facies which in turn will improve the groundwater quality for irrigation.

Appraisal of Surface Water Quality of Nile River Using Water Quality Indices, Spectral Signature and Multivariate Modeling

Surface water quality management is an important facet of the effort to meet increasing demand for water. For that purpose, water quality must be monitored and assessed via the use of innovative techniques, such as water quality indices (WQIs), spectral reflectance indices (SRIs), and multivariate modeling. Throughout the Rosetta and Damietta branches of the Nile River, water samples were collected, and WQIs were assessed at 51 different distinct locations. The drinking water quality index (DWQI), metal index (MI), pollution index (PI), turbidity (Turb.) and total suspended solids (TSS) were assessed to estimate water quality status. Twenty-three physicochemical parameters were examined using standard analytical procedures. The average values of ions and metals exhibited the following sequences: Ca2+ > Na2+ > Mg2+ > K+, HCO32− > Cl− > SO42− > NO3− > CO3− and Al > Fe > Mn > Ba > Ni > Zn > Mo > Cr > Cr, respectively. Furthermore, under the stress of evaporation and the reverse ion exchange process, the main hydrochemical facies were Ca-HCO3 and mixed Ca-Mg-Cl-SO4. The DWQI values of the two Nile branches revealed that 53% of samples varied from excellent to good water, 43% of samples varied from poor to very poor water, and 4% of samples were unsuitable for drinking. In addition, the results showed that the new SRIs extracted from VIS and NIR region exhibited strong relationships with DWQI and MI and moderate to strong relationships with Turb. and TSS for each branch of the Nile River and their combination. The values of the R2 relationships between the new SRIs and WQIs varied from 0.65 to 0.82, 0.64 to 0.83, 0.41 to 0.60 and 0.35 to 0.79 for DWQI, MI, Turb. and TSS, respectively. The PLSR model produced a more accurate assessment of DWQI and MI based on values of R2 and slope than other indices. Furthermore, the partial least squares regression model (PLSR) generated accurate predictions for DWQI and MI of the Rosetta branch in the Val. datasets with an R2 of 0.82 and 0.79, respectively, and for DWQI and MI of the Damietta branch with an R2 of 0.93 and 0.78, respectively. Therefore, the combination of WQIs, SRIs, PLSR and GIS approaches are effective and give us a clear picture for assessing the suitability of surface water for drinking and its controlling factors.

Assessment of Water Quality in Lake Qaroun Using Ground-Based Remote Sensing Data and Artificial Neural Networks

Monitoring and managing water quality parameters (WQPs) in water bodies (e.g., lakes) on a large scale using sampling-point techniques is tedious, laborious, and not highly representative. Hyperspectral and data-driven technology have provided a potentially valuable tool for the precise measurement of WQPs. Therefore, the objective of this work was to integrate WQPs, derived spectral reflectance indices (published spectral reflectance indices (PSRIs)), newly two-band spectral reflectance indices (NSRIs-2b) and newly three-band spectral indices (NSRIs-3b), and artificial neural networks (ANNs) for estimating WQPs in Lake Qaroun. Shipboard cruises were conducted to collect surface water samples at 16 different sites throughout Lake Qaroun throughout a two-year study (2018 and 2019). Different WQPs, such as total nitrogen (TN), ammonium (NH4+), orthophosphate (PO43−), and chemical oxygen demand (COD), were evaluated for aquatic use. The results showed that the highest determination coefficients were recorded with the NSRIs-3b, followed by the NSRIs-2b, and then followed by the PSRIs, which produced lower R2 with all tested WQPs. The majority of NSRIs-3bs demonstrated strong significant relationships with three WQPs (TN, NH4+, and PO43−) with (R2 = 0.70 to 0.77), and a moderate relationship with COD (R2 = 0.52 to 0.64). The SRIs integrated with ANNs would be an efficient tool for estimating the investigated four WQPs in both calibration and validation datasets with acceptable accuracy. For examples, the five features of the SRIs involved in this model are of great significance for predicting TN. Its outputs showed high R2 values of 0.92 and 0.84 for calibration and validation, respectively. The ANN-PO43−VI-17 was the highest accuracy model for predicting PO43− with R2 = 0.98 and 0.89 for calibration and validation, respectively. In conclusion, this research study demonstrated that NSRIs-3b, alongside a combined approach of ANNs models and SRIs, would be an effective tool for assessing WQPs of Lake Qaroun.

Using Optimized Two and Three-Band Spectral Indices and Multivariate Models to Assess Some Water Quality Indicators of Qaroun Lake in Egypt

Standard methods are limited for monitoring and managing water quality indicators (WQIs) in real-time and on a large scale. Consequently, there is an urgent need to use reliable, practical, swift, and cost-effective monitoring tools that can be easily deployed and assist decision makers in assessing key indicators relevant to surface water quality in a comprehensive manner. Surface water samples were collected and evaluated for water quality at 16 distinct sites across the Qaroun Lake in 2018 and 2019. Different WQIs, including total dissolved solids (TDS), transparency, total suspended solids (TSS), chlorophyll-a (Chl-a), and total phosphorus (TP), were tested for aquatic utilization. An integrated approach comprising WQIs, geospatial techniques, hyperspectral reflectance indices (SRIs) (commonly used SRIs, two-band and three-band SRIs (Spectral index calculated from water spectral reflectance of two or three wavelengths)), and partial least square regression (PLSR) models were used to assess the water quality of Qaroun Lake. According to the findings, the water quality attributes are polluted to varying degrees. The majority of commonly used SRIs presented moderately relationship with four WQIs (transparency, TSS, Chl-a, and TP) (R2 = 0.45 to 0.64), while the majority of newly two-band SRIs (NSRIs-2b) indicated moderate to strong relationships with WQIs (R2 = 0.51 to 0.74), and the majority of newly three band SRIs (NSRIs-3b) presented strong relationships with WQIs (R2 = 0.67 to 0.81). Broadly, the highest coefficients of determination were noticed with the NSRIs-3b followed by the NSRIs-2b and then the commonly used SRIs. For example, the NSRIs-3b (NDSI648,712,696) had stronger relationships with transparency, TSS, and Chl-a with R2 = 0.77, 0.66, and 0.81, respectively, than other SRIs. In addition, the NSRIs-3b (NDSI620,610,622) showed the highest R2 of 0.73 with TSS. The NSRIs-3b coupling with PLSR predicted the WQIs with satisfactory accuracy in the calibration (reach up R2 = 0.85) and validation (reach up R2 = 0.81) datasets. The overall findings of this research study showed that deriving an optimized NSRIs-3b from spectrum region and combining it with PLSR model could be a practical tool for managing water quality of the Qaroun Lake by accurately, timely, and non-destructively monitoring the WQIs.

Combining Thermal and RGB Imaging Indices with Multivariate and Data-Driven Modeling to Estimate the Growth, Water Status, and Yield of Potato under Different Drip Irrigation Regimes

Advances in proximal hyperspectral sensing tools, chemometric techniques, and data-driven modeling have enhanced precision irrigation management by facilitating the monitoring of several plant traits. This study investigated the performance of remote sensing indices derived from thermal and red-green-blue (RGB) images combined with stepwise multiple linear regression (SMLR) and an integrated adaptive neuro-fuzzy inference system with a genetic algorithm (ANFIS-GA) for monitoring the biomass fresh weight (BFW), biomass dry weight (BDW), biomass water content (BWC), and total tuber yield (TTY) of two potato varieties under 100%, 75%, and 50% of the estimated crop evapotranspiration (ETc). Results showed that the plant traits and indices varied significantly between the three irrigation regimes. Furthermore, all of the indices exhibited strong relationships with BFW, CWC, and TTY (R2 = 0.80–0.92) and moderate to weak relationships with BDW (R2 = 0.25–0.65) when considered for each variety across the irrigation regimes, for each season across the varieties and irrigation regimes, and across all data combined, but none of the indices successfully assessed any of the plant traits when considered for each irrigation regime across the two varieties. The SMLR and ANFIS-GA models gave the best predictions for the four plant traits in the calibration and testing stages, with the exception of the SMLR testing model for BDW. Thus, the use of thermal and RGB imaging indices with ANFIS-GA models could be a practical tool for managing the growth and production of potato crops under deficit irrigation regimes.