Sustainable, Decentralized Sanitation and Reuse with Hybrid Nature-Based Systems

Water treatment and reclamation by implementing electrochemical systems with constructed wetlands

Seasonal or permanent water scarcity in off-grid communities can be alleviated by recycling water in decentralized wastewater treatment systems. Nature-based solutions, such as constructed wetlands (CWs), have become popular solutions for sanitation in remote locations. Although typical CWs can efficiently remove solids and organics to meet water reuse standards, polishing remains necessary for other parameters, such as pathogens, nutrients, and recalcitrant pollutants. Different CW designs and CWs coupled with electrochemical technologies have been proposed to improve treatment efficiency. Electrochemical systems (ECs) have been either implemented within the CW bed (ECin-CW) or as a stage in a sequential treatment (CW + EC). A large body of literature has focused on ECin-CW, and multiple scaled-up systems have recently been successfully implemented, primarily to remove recalcitrant organics. Conversely, only a few reports have explored the opportunity to polish CW effluents in a downstream electrochemical module for the electro-oxidation of micropollutants or electro-disinfection of pathogens to meet more stringent water reuse standards. This paper aims to critically review the opportunities, challenges, and future research directions of the different couplings of CW with EC as a decentralized technology for water treatment and recovery.

Energy recovery by anaerobic digestion of algal biomass from integrated microalgae/constructed wetland wastewater treatment

The present study evaluated the potential for biogas generation from microalgae (MA) biomass and macrophytes used in vertical flow constructed wetlands (VFCW). The samples were obtained by separation and collection of MA after a hydraulic retention time of 14 days, frozen and taken to the laboratory, while the macrophytes of VFCW were obtained, by pruning, every 6 months. The obtained results presented reductions of 63.22% and 61.18% for COD and BOD₅, respectively, and removal efficiencies of 53.91% for TP and 99.98% de N-NH₃. Average biogas generation was 2322.51 NmL-gSV^-1 with 54.61% CH₄ (winter/2019), 4491.47 Nml-gSV^-1 with 57.17% CH₄ (spring/2019), 680.78 NmL-gSV^-1 with 16.04% CH₄ (summer/2020), and 681.0 NmL-gSV^-1 with 19.86% CH₄ (autumn/2020) for MA biomass and generation of biogas of 3826.70 NmL-gSV^-1 with 44.26% CH₄ for VFCW biomass in winter and spring/2019 and of 829.68 NmL-gSV^-1 with 17.06% CH₄ in summer and autumn/2020. Regarding electricity generation, the present work obtained 1.50 kWh/m³, therefore reaching similar values to other studies that used more traditional biomass sources.

Side-Stream Phosphorus Recovery in Activated Sludge Processes

Precipitation of mineral phosphates from wastewater treatment processes is an excellent method for phosphorus recovery, leading to the formation of compounds with high fertilizing value. Conventionally, P-precipitation processes are mostly applied to supernatant of anaerobic sludge digestates, due to their high P and N residual contents. This study concerns P-recovery in a pilot-scale side-stream reactor from aerobic (activated sludge) wastewater liquor. The effect of process retention time and pH was determined using sodium hydroxide and calcium hydroxide as alternative pH buffer reagents, in both synthetic and real wastewater. Equilibrium mass balance calculations were first applied to estimate the theoretical final composition of P-precipitates under different process conditions; then, actual precipitation experiments were carried out with synthetic wastewater to define optimal process operating parameters in controlled conditions. Results showed that phosphorus precipitation was affected mainly by solution pH and did not significantly depend on the reactor’s retention time. These findings were validated by operating the process with real wastewater: on average, 61.2% and 90.4% phosphorus precipitation (recovery) were achieved at pH = 8.5 and 9.0 under a controlled Mg:NH4:P molar ratio of 5:5:1, using sodium hydroxide as acidity buffer. The main fraction of final precipitates consisted of calcium phosphate compounds, while struvite, bobierrite and calcite showed up in smaller proportions. It was also shown that dosage of calcium hydroxide for pH adjustment, without any other chemicals for molar ratios adjustment of the solution, has great potential for P recovery in the form of a calcium phosphate-rich precipitate, usable for fertilizer, with 75.6% phosphorus removal in mineral form at pH = 8.5. The process is much less costly to operate than struvite precipitation, and more energetically sustainable. This scheme could be ideally suited for application in facilities operating under an enhanced phosphorus removal process scheme.

Wastewater fertigation in agriculture: Issues and opportunities for improved water management and circular economy

Water shortages are an issue of growing worldwide concern. Irrigated agriculture accounts for about 70% of total freshwater withdrawals globally, therefore alternatives to use of conventional sources need to be investigated. This paper critically reviews the application of treated wastewater for agricultural fertigation (i.e., water and nutrient recovery) considering different perspectives: legislation, agronomic characteristics, social acceptability, sustainability of treatment technologies. Critical issues that still need further investigation for a wider application of fertigation practices include accumulation of emerging contaminants in soils, microbiological and public health implications, and stakeholders' acceptance. A techno-economic methodological approach for assessing the sustainability of treated wastewater reuse in agriculture is subsequently proposed herein, which considers different possible local conditions (cultivated crops and effluent characteristics). The results showed that tailoring effluent characteristics to the desired nutrient composition could enhance the process economic sustainability; however, water savings have a major economic impact than fertilizers' savings, partly due to limited P reuse efficiency. The developed methodology is based on a practical approach and may be generalized to most agricultural conditions, to evaluate and encourage safe and efficient agricultural wastewater reuse practices.

Hydropower Technology for Sustainable Energy Generation in Wastewater Systems: Learning from the Experience

Hydropower is a well-known technology, applied worldwide for electricity generation from renewable sources. Within the current framework, some studies have started to consider its application to existing urban water systems, to harness an excess of energy that otherwise would be wasted. This research sought to determine a methodology to assess the potential of hydropower application to wastewater treatment plants (WWTPs), regarding different aspects of sustainability. Firstly, previously developed methodologies for potential assessment in this sector at a country level were analyzed. Secondly, data from existing real case studies were gathered from publicly available documents and a theoretical analysis of their actual performance was conducted to validate assumptions made in the previous methodologies. As a result, the proposed new approach suggests adapting methodologies for potential assessment at a lower level, considering possible driving factors, other than economic feasibility. To define the study area, the management model scope should be considered. The power to determine the cut-off point for a WWTP to be considered as a potential site, is proposed to be lowered according to technical feasibility. Additionally, bearing in mind the sustainability concept, social or environmental factors should also be introduced in the methodology, tailored to the region being assessed. This novel perspective could provide a closer approach to the most likely decision-making level for these kinds of strategies in the wastewater industry.