Intensifying Electron Utilization by Surface-Anchored Rh Complex for Enhanced Nicotinamide Cofactor Regeneration and Photoenzymatic CO2 Reduction

Heteroatom Structural Engineering of Conjugated Porous Polymers Enhances Photocatalytic Nicotinamide Cofactor Regeneration

Photocatalysis is an eco-friendly method to regenerate nicotinamide (NADH) cofactors, which is essential for biotransformation over oxidoreductases. Organic polymers exhibit high stability, biocompatibility and functional designability as photocatalysts, but still suffering from rapid charge recombination. Herewith the heteroatom structural engineering of donor-π-acceptor (D-π-A) conjugated porous polymers were conducted to promote charge transfer and photocatalytic NADH regeneration. The electron delocalization of polymer photocatalysts can be readily tuned by changing the electron density of the donor unit, leading to faster charge separation and better photocatalytic performance. The optimum sulfur-doped polymer exhibits the highest NADH regeneration yield of 47.4 % in 30 min and 94.1 % in 4 h, which can drive the biocatalytic C=C bond reduction of 2-cyclohexen-1-one by ene-reductase, giving the corresponding cyclohexanone yield of 96.7 % in 10 h. Moreover, the oxygen-doped polymer, from biomass derived 2,5-diformylfuran, exhibits comparable photocatalytic activity to the sulfur-doped CPP, suggesting the potential of furan as alternative donor unit to thiophene.

Engineering 0D/2D Architecture of Ni(OH)2 Nanoparticles on Covalent Organic Framework Nanosheets for Selective Visible-Light-Driven CO2 Reduction

Low-dimensional materials serving as photocatalysts favor providing abundant unsaturated active sites and shortening the charge transport distance, but the high surface energy readily causes the aggregation that limits their application. Herein, it is demonstrated that 2D covalent organic framework (COF) TpBD nanosheets are effective in the dispersion and stabilization of 0D Ni(OH)2 . The COF precursor TpBD is synthesized from the Schiff base condensation of 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) and exfoliated into 2D nanosheets named BDNs via ultrasonication. The formation of highly dispersive 0D Ni(OH)2 on BDNs is reached under a mild weak basic condition, enabling robust active sites for CO2 adsorption/activation and rapid interface cascaded electron transport channels for the accumulation of long-lived photo-generated charges. The champion catalyst 30%Ni-BDNs effectively catalyze the CO2 to CO conversion under visible-light irradiation, offering a high CO evolution rate of 158.4 mmol g-1 h-1 and turnover frequency of 51 h-1 . By contrast, the counterpart photocatalyst, the bulk TpBD stabilized Ni(OH)2 , affords a much lower CO evolution rate and selectivity. This work demonstrates a new avenue to simultaneously construct efficient active sites and electron transport channels by coupling 0D metal hydroxides and 2D COF nanosheets for CO2 photoreduction.

NADH Photosynthesis System with Affordable Electron Supply and Inhibited NADH Oxidation

Photosynthesis offers a green approach for the recycling of nicotinamide cofactors primarily NADH in bio-redox reactions. Herein, we report an NADH photosynthesis system where the oxidation of biomass derivatives is designed as an electron supply module (ESM) to afford electrons and superoxide dismutase/catalase (SOD/CAT) cascade catalysis is designed as a reactive oxygen species (ROS) elimination module (REM) to inhibit NADH degradation. Glucose as the electron donor guarantees the reaction sustainability accompanied with oxidative products of gluconic acid and formic acid. Meanwhile, enzyme cascades of SOD/CAT greatly eliminate ROS, leading to a ≈2.00-fold elevation of NADH yield (61.1 % vs. 30.7 %). The initial reaction rate and turnover frequency (TOF) increased by 2.50 times and 2.54 times, respectively, compared with those systems without REM. Our study establishes a novel and efficient platform for NADH photosynthesis coupled to biomass-to-chemical conversion.

Direct Biocatalytic Processes for CO2 Capture as a Green Tool to Produce Value-Added Chemicals

Direct biocatalytic processes for CO₂ capture and transformation in value-added chemicals may be considered a useful tool for reducing the concentration of this greenhouse gas in the atmosphere. Among the other enzymes, carbonic anhydrase (CA) and formate dehydrogenase (FDH) are two key biocatalysts suitable for this challenge, facilitating the uptake of carbon dioxide from the atmosphere in complementary ways. Carbonic anhydrases accelerate CO₂ uptake by promoting its solubility in water in the form of hydrogen carbonate as the first step in converting the gas into a species widely used in carbon capture storage and its utilization processes (CCSU), particularly in carbonation and mineralization methods. On the other hand, formate dehydrogenases represent the biocatalytic machinery evolved by certain organisms to convert CO₂ into enriched, reduced, and easily transportable hydrogen species, such as formic acid, via enzymatic cascade systems that obtain energy from chemical species, electrochemical sources, or light. Formic acid is the basis for fixing C₁-carbon species to other, more reduced molecules. In this review, the state-of-the-art of both methods of CO₂ uptake is assessed, highlighting the biotechnological approaches that have been developed using both enzymes.

Enzymatic Electrosynthesis of Glycine from CO2 and NH3

Enzymatic electrosynthesis has gained more and more interest as an emerging green synthesis platform, particularly for the fixation of CO₂ . However, the simultaneous utilization of CO₂ and a nitrogenous molecule for the enzymatic electrosynthesis of value-added products has never been reported. In this study, we constructed an in vitro multienzymatic cascade based on the reductive glycine pathway and demonstrated an enzymatic electrocatalytic system that allowed the simultaneous conversion of CO₂ and NH₃ as the sole carbon and nitrogen sources to synthesize glycine. Through effective coupling and the optimization of electrochemical cofactor regeneration and the multienzymatic cascade reaction, 0.81 mM glycine was yielded with a highest reaction rate of 8.69 mg L^-1  h^-1 and faradaic efficiency of 96.8 %. These results imply a promising alternative for enzymatic CO₂ electroreduction and expand its products to nitrogenous chemicals.

Artificial Photoenzymatic Reduction of Carbon Dioxide to Methanol by Using Electron Mediator and Co-factorAssembled ZnIn2 S4 Nanoflowers

Increased absorption of visible light, low electron-hole recombination, and fast electron transfer are the major objectives for highly effective photocatalysts in biocatalytic artificial photosynthetic systems. In this study, a polydopamine (PDA) layer containing electron mediator, [M], and NAD⁺ cofactor was assembled on the outer surface of ZnIn₂ S₄ nanoflower, and the as-prepared nanoparticle, ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ , was used for photoenzymatic methanol production from CO₂ . Because of effective capturing of visible light, reduced distance of electron transfer, and elimination of electron-holes recombination, a high NADH regeneration of 80.7±1.43 % could be obtained using the novel ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ . In the artificial photosynthesis system, a maximum methanol production of 116.7±11.8 μm was obtained. The enzymes and nanoparticles in the hybrid bio-photocatalysis system could be easily recovered using the ultrafiltration membrane at the bottom of the photoreactor. This is due to the successful immobilization of the small blocks including the electron mediator and cofactor on the surface of the photocatalyst. The ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ photocatalyst exhibited good stability and recyclability for methanol production. The novel concept presented in this study shows great promise for other sustainable chemical productions through artificial photoenzymatic catalysis.

Electrocatalytic NAD+ reduction via hydrogen atom-coupled electron transfer

Nicotinamide adenine dinucleotide cofactor (NAD(P)H) is regarded as an important energy carrier and charge transfer mediator. Enzyme-catalyzed NADPH production in natural photosynthesis proceeds via a hydride transfer mechanism. Selective and effective regeneration of NAD(P)H from its oxidized form by artificial catalysts remains challenging due to the formation of byproducts. Herein, electrocatalytic NADH regeneration and the reaction mechanism on metal and carbon electrodes are studied. We find that the selectivity of bioactive 1,4-NADH is relatively high on Cu, Fe, and Co electrodes without forming commonly reported NAD2 byproducts. In contrast, more NAD2 side product is formed with the carbon electrode. ADP-ribose is confirmed to be a side product caused by the fragmentation reaction of NAD+. Based on H/D isotope effects and electron paramagnetic resonance analysis, it is proposed that the formation of NADH on these metal electrodes proceeds via a hydrogen atom-coupled electron transfer (HadCET) mechanism, in contrast to the direct electron-transfer and NAD˙ radical pathway on carbon electrodes, which leads to more by-product, NAD2. This work sheds light on the mechanism of electrocatalytic NADH regeneration, which is different from biocatalysis.

Non-covalent metalation of carbon nitride for photocatalytic NADH regeneration and enzymatic CO2 reduction

An artificial photocatalyst with a Rh complex immobilized onto polymeric carbon nitride (CN) through non-covalent interaction was constructed for photocatalytic NADH regeneration. DFT calculations verified the adsorption of the bipyridine ligand onto the CN photocatalyst. By further coupling the in situ formed NADH with FDH immobilized on a hydrophobic membrane, an enhanced HCOOH production (3.1 mM) from CO₂ could be realized on the gas-liquid-solid three-phase interface. This work provides an alternative and efficient strategy for promoting artificial photosynthesis.

Partial Metalation of Porphyrin Moieties in Hydrogen-Bonded Organic Frameworks Provides Enhanced CO2 Photoreduction Activity

In natural photosynthesis, the architecture of multiproteins integrates more chromophores than redox centers and simultaneously creates a well-controlled environment around the active site. Herein, we demonstrate that these features can be emulated in a prototype hydrogen-bonded organic framework (HOF) through simply varying the proportion of metalated porphyrin in the structure. Further studies demonstrate that changing the metalloporphyrin content not only realizes a fine tuning of the photosensitizer/catalyst ratio, but also alters the microenvironment surrounding the active site and the charge separation efficiency. As a result, the obtained material achieves the challenging overall CO₂ reduction with a high HCOOH production rate (29.8 μmol g^-1  h^-1 , scavenger free), standing out from existing competitors. This work unveils that the degree of metalation is vital to the catalytic activity of the porphryinic framework, presenting as a new strategy to optimize the performance of heterogeneous catalysts.

Thylakoid Membrane-Inspired Capsules with Fortified Cofactor Shuttling for Enzyme-Photocoupled Catalysis

Enzyme-photocoupled catalytic systems (EPCSs), combining the natural enzyme with a library of semiconductor photocatalysts, may break the constraint of natural evolution, realizing sustainable solar-to-chemical conversion and non-natural reactivity of the enzyme. The overall efficiency of EPCSs strongly relies on the shuttling of energy-carrying molecules, e.g., NAD⁺/NADH cofactor, between active centers of enzyme and photocatalyst. However, few efforts have been devoted to NAD⁺/NADH shuttling. Herein, we propose a strategy of constructing a thylakoid membrane-inspired capsule (TMC) with fortified and tunable NAD⁺/NADH shuttling to boost the enzyme-photocoupled catalytic process. The apparent shuttling number (ASN) of NAD⁺/NADH for TMC could reach 17.1, ∼8 times as high as that of non-integrated EPCS. Accordingly, our TMC exhibits a turnover frequency (TOF) of 38 000 ± 365 h^-1 with a solar-to-chemical efficiency (STC) of 0.69 ± 0.12%, ∼6 times higher than that of non-integrated EPCS.

Preparation of chiral aryl alcohols: a controllable enzymatic strategy via light-driven NAD(P)H regeneration

Controllable and mild photoenzymatic production of chiral alcohols was realized by coupling a photochemical NAD(P)H regeneration system with (R)- or (S)-selective ketoreductases.

General framework for enzyme-photo-coupled catalytic system toward carbon dioxide conversion

High emission of carbon dioxide (CO₂) has aroused global concern due to the 'greenhouse effect'. The conversion of CO₂ to valuable chemicals/materials is an indispensable route toward 'carbon neutrality'. Enzyme-photo-coupled catalytic systems (EPCCSs), integrating synthetic library of semiconductor photocatalyst and natural database of enzyme, have emerged as a green and powerful platform toward CO₂ conversion. Herein, we discuss the recent progress in design and application of EPCCSs for CO₂ conversion from the perspective of pathway engineering, reaction engineering and system engineering. We firstly summarize the explored pathways of EPCCSs for converting CO₂ to C₁ and C₂₊ products. Secondly, we discuss the matching of kinetics between photocatalytic and enzymatic reactions in EPCCSs. Thirdly, we unveil the complex interplay between photocatalytic and enzymatic modules, and further demonstrate the strategy of compartmentalization to eliminate the negative interactions. Lastly, we conclude with the perspective on the opportunities and challenges of EPCCSs for CO₂ conversion.