Sensing surface PEGylation with microcantilevers

Interfacial Behavior of Biodegradable Poly(lactic-co-glycolic acid)-Pluronic F127 Nanoparticles and Its Impact on Pickering Emulsion Stability

Biodegradable nanoparticle-based emulsions exhibit immense potential in various applications, particularly in the pharmaceutical, cosmetic, and food industries. This study delves into the intricate interfacial behavior of Pluronic F127 modified poly(lactic-co-glycolic acid) (PLGA-F127) nanoparticles, a crucial determinant of their ability to stabilize Pickering emulsions. Employing a combination of Langmuir balance, surface tension, and diffusion coefficient measurements, we investigate the interfacial dynamics of PLGA-F127 nanoparticles under varying temperature and ionic strength conditions. Theoretical calculations are employed to elucidate the underlying mechanisms governing these phenomena. Our findings reveal a profound influence of temperature-dependent Pluronic layer behavior and electrostatic and steric interactions on the interfacial dynamics. Nonlinear changes in surface tension are observed, reflecting the interplay of these factors. Particle aggregation is found to be prevalent at elevated temperatures and ionic strengths, compromising the stability and emulsification efficiency of the formed emulsions. This work provides insights into the rational design of stable and efficient biodegradable nanoparticle-based Pickering emulsions, broadening their potential applications in various fields.

Unraveling the Phase Behavior, Mechanical Stability, and Protein Reconstitution Properties of Polymer-Lipid Hybrid Vesicles

Hybrid vesicles consisting of natural phospholipids and synthetic amphiphilic copolymers have shown remarkable material properties and potential for biotechnology, combining the robustness of polymers with the biocompatibility of phospholipid membranes. To predict and optimize the mixing behavior of lipids and copolymers, as well as understand the interaction between the hybrid membrane and macromolecules like membrane proteins, a comprehensive understanding at the molecular level is essential. This can be achieved by a combination of molecular dynamics simulations and experiments. Here, simulations of POPC and PBD22-b-PEO14 hybrid membranes are shown, uncovering different copolymer configurations depending on the polymer-to-lipid ratio. High polymer concentrations created thicker membranes with an extended polymer conformation, while high lipid content led to the collapse of the polymer chain. High concentrations of polymer were further correlated with a decreased area compression modulus and altered lateral pressure profiles, hypothesized to result in the experimentally observed improvement in membrane protein reconstitution and resistance toward destabilization by detergents. Finally, simulations of a WALP peptide embedded in the bilayer showed that only membranes with up to 50% polymer content favored a transmembrane configuration. These simulations correlate with previous and new experimental results and provide a deeper understanding of the properties of lipid-copolymer hybrid membranes.

Synthesis and kinetic analysis of poly(N-acryloylmorpholine) brushes via surface initiated RAFT polymerization

Polymer brushes are promising many applications as smart materials and biocompatible surfaces. Surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization is one of the most effective techniques for synthesis of well-defined polymer brushes. Herein, a biocompatible, uniform and stable poly(N-acryloylmorpholine)-silicon hybrid system was achieved using surface-initiated RAFT polymerization. Evidence of a well-controlled surface-initiated RAFT polymerization was confirmed by a linear increase of number average molecular weight (Mn) with overall monomer conversions. Water contact angle, ellipsometry, X-ray photoelectron spectroscopy and atomic force microscopy verified the presence of poly(N-acryloylmorpholine) (poly(NAM)) on silicon wafers. The grafting density (σ) and the average distance between grafting points (D) were estimated to be 0.58 chains/nm2 and 1.5 nm, respectively. The ratio of D value to radius of gyration (Rg) value is smaller than 1 (D/2Rg < 1), which corresponds to the brush regime of all grafted poly(NAM) films.

Formation of kinetically trapped small clusters of PEGylated gold nanoparticles revealed by the combination of small-angle X-ray scattering and visible light spectroscopy

Gold nanoparticles coated with polyethylene glycol (PEG) are able to form clusters due to the collapse of the surface-grafted polymer chains when the temperature and ion concentration of the aqueous medium are increased. The chain collapse reduces the steric repulsion, leading to particle aggregation. In this work, we combine small angle X-ray scattering (SAXS) and visible light spectroscopy to elucidate the structure of the developing clusters. The structure derived from the SAXS measurements reveals a decrease in interparticle distance and drastic narrowing of its distribution in the cluster, indicating restricted particle mobility and displacement within the cluster. Surprisingly, instead of forming a large crystalline phase, the evolving clusters are composed of about a dozen particles. The experimental optical extinction spectra measured during cluster formation can be very well reproduced by optical simulations based on the SAXS-derived structural data.

Defined positive charge patterns created on DNA nanostructures determine cellular uptake efficiency

We provide an effective method to create DNA nanostructures below 100 nm with defined charge patterns and explore whether the density and location of charges affect the cellular uptake efficiency of nanoparticles (NPs). To avoid spontaneous charge neutralization, the negatively charged polymer nanopatterns were first created by in situ polymerization using photoresponsive monomers on DNA origami. Subsequent irradiation generated positive charges on the immobilized polymers, achieving precise positively charged patterns on the negatively charged DNA surface. Via this method, we have discovered that the positive charges located on the edges of nanostructures facilitate more efficient cellular uptake in comparison to the central counterparts. In addition, the high-density positive charge decoration could also enhance particle penetration into 3D multicellular spheroids. This strategy paves a new way to construct elaborate charge-separated substructures on NP surfaces and holds great promise for a deeper understanding of the influence between the surface charge distribution and nano-bio interactions.

Visualization of Ion|Surface Binding and In Situ Evaluation of Surface Interaction Free Energies via Competitive Adsorption Isotherms

Function and properties at biologic as well as technological interfaces are controlled by a complex and concerted competition of specific and unspecific binding with ions and water in the electrolyte. It is not possible to date to directly estimate by experiment the interfacial binding energies of involved species in a consistent approach, thus limiting our understanding of how interactions in complex (physiologic) media are moderated. Here, we employ a model system utilizing polymers with end grafted amines interacting with a negatively charged mica surface. We measure interaction forces as a function of the molecule density and ion concentration in NaCl solutions. The measured adhesion decreases by about 90%, from 0.01 to 1 M electrolyte concentration. We further demonstrate by molecular resolution imaging how ions increasingly populate the binding surface at elevated concentrations, and are effectively competing with the functional group for a binding site. We demonstrate that a competing Langmuir isotherm model can describe this concentration-dependent competition. Further, based on this model we can quantitatively estimate ion binding energies, as well as binding energy relationships at a complex solid|liquid interface. Our approach enables the extraction of thermodynamic interaction energies and kinetic parameters of ionic species during monolayer level interactions at a solid|liquid interface, which to-date is impossible with other techniques.

Stretching single titin molecules from failing human hearts reveals titin's role in blunting cardiac kinetic reserve

AIMS

Heart failure (HF) patients commonly experience symptoms primarily during elevated heart rates, as a result of physical activities or stress. A main determinant of diastolic passive tension, the elastic sarcomeric protein titin, has been shown to be associated with HF, with unresolved involvement regarding its role at different heart rates. To determine whether titin is playing a role in the heart rate (frequency-) dependent acceleration of relaxation (FDAR). W, we studied the FDAR responses in live human left ventricular cardiomyocytes and the corresponding titin-based passive tension (TPT) from failing and non-failing human hearts.

METHODS AND RESULTS

Using atomic force, we developed a novel single-molecule force spectroscopy approach to detect TPT based on the frequency-modulated cardiac cycle. Mean TPT reduced upon an increased heart rate in non-failing human hearts, while this reduction was significantly blunted in failing human hearts. These mechanical changes in the titin distal Ig domain significantly correlated with the frequency-dependent relaxation kinetics of human cardiomyocytes obtained from the corresponding hearts. Furthermore, the data suggested that the higher the TPT, the faster the cardiomyocytes relaxed, but the lower the potential of myocytes to speed up relaxation at a higher heart rate. Such poorer FDAR response was also associated with a lesser reduction or a bigger increase in TPT upon elevated heart rate.

CONCLUSIONS

Our study established a novel approach in detecting dynamic heart rate relevant tension changes physiologically on native titin domains. Using this approach, the data suggested that the regulation of kinetic reserve in cardiac relaxation and its pathological changes were associated with the intensity and dynamic changes of passive tension by titin.

Optimizing PEGylation of TiO2 Nanocrystals through a Combined Experimental and Computational Study

PEGylation of metal oxide nanoparticles is the common approach to improve their biocompatibility and in vivo circulation time. In this work, we present a combined experimental and theoretical study to determine the operating condition that guarantee very high grafting densities, which are desirable in any biomedical application. Moreover, we present an insightful conformational analysis spanning different coverage regimes and increasing polymer chain lengths. Based on 13C NMR measurements and molecular dynamics simulations, we show that classical and popular models of polymer conformation on surfaces fail in determining the mushroom-to-brush transition point and prove that it actually takes place only at rather high grafting density values.

Analytical Model To Describe the Effect of Polyethylene Glycol on Ionic Screening of Analyte Charges in Transistor-Based Immunosensing

Recently, the co-immobilization of polyethylene glycol has improved sensor responses of transistor-based immunosensing by approximately three times. However, there is currently no analytical model available to explain this empirical effect. The key parameters thought to affect the potential are the receptor density, the capacitance, the analyte charge, and the dissociation constant. Based on our experimental data, only the analyte charge can account for the signal enhancement. To capture the effect of PEG on the analyte charge, we introduce a prefactor, the detectable charge q_det, which represents the portion of analyte charges effectively detected by the sensor. This parameter can quantitatively describe the PEG-induced signal enhancement and can be used to recommend the choice of PEG size for immuno-field-effect transistors. Additionally, we include the competition between electrolyte ions and the analyte for binding to the recognition molecule to more accurately describe the concentration-dependent sensor responses than the traditional Langmuir binding model does.

Modifying the Band Gap of Semiconducting Two-Dimensional Materials by Polymer Assembly into Different Structures

Polyethylene glycol (PEG) assembled on the surface of two-dimensional tungsten disulfide (WS₂) into a limited number of nanoislands (NIs), nanoshells (NSs), and granular nanoparticulates (GNPs) depending on its chain length. NI assemblies showed a nonmeasurable shift of photoluminescence (PL) and the A and B absorption peaks of WS₂. This confirmed that the electronic doping by thiol is not effective. The PEG NS assembly displayed a smaller red shift of the PL and a slight decrease of the energy difference between the A and B absorption peaks of WS₂. However, increasing the dielectric function on the surface of WS₂ has a small influence on their optical properties. The PEG NP assembly on WS₂ exhibited a significant red shift of the PL spectrum and a large decrease of the energy difference between A and B absorption peaks. Deforming the WS₂ sheet by the PEG NP assembly decreased the orbital coupling and lowered the electronic direct band gap significantly. Raman bands of WS₂ are shifted to a higher frequency on improving its mechanical strength after the PEG assembly.

Measurement of entropic force from polymers attached to a pyramidal tip

The measurement of the boundary shape dependence of the entropic force from long polymers was attempted. The pyramidal cone-plate geometry was chosen. The polymer molecules were covalently bound to a well-defined Au patch at the apex of a pyramidal cantilever tip of the atomic force microscope (AFM). A smooth hydrophobic plate was used as the second boundary to confine the polymer molecules. The use of the hydrophobic plate allows neglect of polymer adhesion forces. The measurements were made in salt water solution to decrease the effect of electrostatic forces from any uncompensated charges on the boundary. As the functionalized AFM tip approaches the flat hydrophobic surface, the induced entropic forces were measured as a function of the separation distance. The measured force-distance curves are compared with a model of polymer-mediated entropic force between scale-free objects and the Alexander-de Gennes (AdG) theory for a polymer brush.

Multivalent ions induce lateral structural inhomogeneities in polyelectrolyte brushes

Subtle details about a polyelectrolyte's surrounding environment can dictate its structural features and potential applications. Atomic force microscopy (AFM), surface forces apparatus (SFA) measurements, and coarse-grained molecular dynamics simulations are combined to study the structure of planar polyelectrolyte brushes [poly(styrenesulfonate), PSS] in a variety of solvent conditions. More specifically, AFM images provide a first direct visualization of lateral inhomogeneities on the surface of polyelectrolyte brushes collapsed in solutions containing trivalent counterions. These images are interpreted in the context of a coarse-grained molecular model and are corroborated by accompanying interaction force measurements with the SFA. Our findings indicate that lateral inhomogeneities are absent from PSS brush layers collapsed in a poor solvent without multivalent ions. Together, AFM, SFA, and our molecular model present a detailed picture in which solvophobic and multivalent ion-induced effects work in concert to drive strong phase separation, with electrostatic bridging of polyelectrolyte chains playing an essential role in the collapsed structure formation.

Lectin-functionalized mesoporous silica nanoparticles for endoscopic detection of premalignant colonic lesions

Colorectal cancer (CRC) is one of the leading causes of cancer-deaths worldwide. Methods for the early in situ detection of colorectal adenomatous polyps and their precursors - prior to their malignancy transformation into CRC - are urgently needed. Unfortunately at present, the primary diagnostic method, colonoscopy, can only detect polyps and carcinomas by shape/morphology; with sessile polyps more likely to go unnoticed than polypoid lesions. Here we describe our development of polyp-targeting, fluorescently-labeled mesoporous silica nanoparticles (MSNs) that serve as targeted endoscopic contrast agents for the early detection of colorectal polyps and cancer. In vitro cell studies, ex vivo histopathological analysis, and in vivo colonoscopy and endoscopy of murine colorectal cancer models, demonstrate significant binding specificity of our nanoconstructs to pathological lesions via targeting aberrant α-L-fucose expression. Our findings strongly suggest that lectin-functionalized fluorescent MSNs could serve as a promising endoscopic contrast agent for in situ diagnostic imaging of premalignant colonic lesions.

Ab Initio Investigation of Polyethylene Glycol Coating of TiO2 Surfaces

In biomedical applications, TiO₂ nanoparticles are generally coated with polymers to prevent agglomeration, improve biocompatibility, and reduce cytotoxicity. Although the synthesis processes of such composite compounds are well established, there is still a substantial lack of information on the nature of the interaction between the titania surface and the organic macromolecules. In this work, the adsorption of polyethylene glycol (PEG) on the TiO₂ (101) anatase surface is modeled by means of dispersion-corrected density functional theory (DFT-D2) calculations. The two extreme limits of an infinite PEG polymer [-(OCH₂CH₂) _n ], on one side, and of a short PEG dimer molecule [H(OCH₂CH₂)₂OH], on the other, are analyzed. Many different molecular configurations and modes of adsorption are compared at increasing surface coverage densities. At low and medium coverage, PEG prefers to lay down on the surface, while at full coverage, the adsorption is maximized when PEG molecules bind perpendicularly to the surface and interact with each other through lateral dispersions, following a mushroom to brush transition. Finally, we also consider the adsorption of competing water molecules at different coverage densities, assessing whether PEG would remain bonded to the surface or desorb in the presence of the aqueous solvent.

Effect of Surface Functionalization on the Cellular Uptake and Toxicity of Nanozeolite A

Extensive use of zeolite nanoparticles in many areas, including medicine, has led to the concern about an impact and possible risk of their use for human health and the environment.In our studies, we investigated an uptake, retention, and cytotoxicity of nanozeolite A (BaA) functionalized with aminopropyl or poly(ethylene glycol) (PEG) of different chain lengths using human cervical carcinoma cell line. For internalization studies, nanozeolite was labeled with (133)Ba radionuclide.The results show that in the case of PEG modification, toxicity and uptake depend on the PEG chain length. The highest toxicity has been observed for nanozeolites coated with short-length chain (Ba-silane-PEGm(MW350). Also, amine-modified nanozeolites exhibited high toxicity, while nanozeolites coated with long PEG molecules, BaA-silane-PEGm(MW1000), and BaA-silane-PEGm(MW2000), as well as unmodified nanozeolite, seem to be nontoxic.In conclusion, this study shows that uptake, retention, and toxicity of nanozeolites coated with various length PEG molecules groups depend on the molecular weight of PEG.

Silver Nanodisk Monolayers with Surface Coverage Gradients for Use as Optical Rulers and Protractors

Colloidal silver nanodisks (AgNDs) are assembled into a monolayer with a coverage density gradient (CDG) on the surface of flat and cylindrical substrates using the Langmuir-Blodgett (LB) technique. Compressing the LB monolayers during transfer to the substrates causes the CDG assembly of the AgNDs. By functionalizing the AgNDs with poly(ethylene glycol), it is possible to control their order inside the LB monolayer assembly by changing the deposition surface pressure. Well-separated AgNDs, 2D aggregates with different numbers of particles, and highly packed 2D arrays are formed as the deposition surface pressure is increased. Localized surface plasmon resonance (LSPR) spectra collected at different separation distances from the highest coverage spot (HCS) of the CDG AgND arrays on a flat substrate are blue-shifted, and the shift increases systematically upon increasing the distance. The relationship among the LSPR peak position, the peak intensity at a fixed wavelength, and the corresponding separation distance from the HCS is fitted exponentially. A similar systematic blue shift in the LSPR spectrum of the CDG AgND monolayer on a cylindrical substrate is obtained when the substrate is rotated at different angles relative to the HCS. The fabricated CDG AgND monolayers can potentially be used for optically measuring distances and angles.

Bottom-Up Fabrication of Nanopatterned Polymers on DNA Origami by In Situ Atom-Transfer Radical Polymerization

Bottom-up strategies to fabricate patterned polymers at the nanoscale represent an emerging field in the development of advanced nanodevices, such as biosensors, nanofluidics, and nanophotonics. DNA origami techniques provide access to distinct architectures of various sizes and shapes and present manifold opportunities for functionalization at the nanoscale with the highest precision. Herein, we conduct in situ atom-transfer radical polymerization (ATRP) on DNA origami, yielding differently nanopatterned polymers of various heights. After cross-linking, the grafted polymeric nanostructures can even stably exist in solution without the DNA origami template. This straightforward approach allows for the fabrication of patterned polymers with low nanometer resolution, which provides access to unique DNA-based functional hybrid materials.

A General Approach for Generating Fluorescent Probes to Visualize Piconewton Forces at the Cell Surface

Mechanical forces between cells and their extracellular matrix (ECM) are mediated by dozens of different receptors. These biophysical interactions play fundamental roles in processes ranging from cellular development to tumor progression. However, mapping the spatial and temporal dynamics of tension among various receptor-ligand pairs remains a significant challenge. To address this issue, we have developed a synthetic strategy to generate modular tension probes combining the native chemical ligation (NCL) reaction with solid phase peptide synthesis (SPPS). In principle, this approach accommodates virtually any peptide or expressed protein amenable to NCL. We generated a small library of tension probes displaying different ligands, flexible linkers, and fluorescent reporters, enabling the mapping of integrin and cadherin tension, and demonstrating the first example of long-term (∼3 days) molecular tension imaging. This approach provides a toolset to better understand mechanotransduction events fundamental to cell biology.

Cucurbit[8]uril directed stimuli-responsive supramolecular polymer brushes for dynamic surface engineering

In situ modification of surfaces with thin layers of polymers is of growing interest as adjustment of surface properties can be made on demand. We present herein a supramolecular 'grafting to' polymer brush via the recognition of surface-bound cucurbit[8]uril (CB[8]) rotaxanes towards end-functionalised polyethylene glycol (PEG). This dynamic supramolecular method represents advantages over traditional approaches, which employ covalent bond formation in the 'grafting to' process. Brush properties can be easily modified post-preparation by exchanging the polymers with small molecules in a controlled, reversible manner. Including both redox- and light-responsive guests in a single rotaxane entity, the CB[8]-mediated preparation of the polymer brush offers unique opportunities to switch the brush composition efficiently. While the PEG brushes are well hydrated in a good solvent (water) and stretch away from the surface, they collapse in a poor solvent (toluene), leading to the formation of a dense layer on the surface. This collapsed conformation protects the heteroternary complexes of CB[8]-rotaxane from dissociation and maintains the attachment of polymers on the surface.

Surface Functionalization of Nanoparticles with Polyethylene Glycol: Effects on Protein Adsorption and Cellular Uptake

Here we have investigated the effect of enshrouding polymer-coated nanoparticles (NPs) with polyethylene glycol (PEG) on the adsorption of proteins and uptake by cultured cells. PEG was covalently linked to the polymer surface to the maximal grafting density achievable under our experimental conditions. Changes in the effective hydrodynamic radius of the NPs upon adsorption of human serum albumin (HSA) and fibrinogen (FIB) were measured in situ using fluorescence correlation spectroscopy. For NPs without a PEG shell, a thickness increase of around 3 nm, corresponding to HSA monolayer adsorption, was measured at high HSA concentration. Only 50% of this value was found for NPs with PEGylated surfaces. While the size increase clearly reveals formation of a protein corona also for PEGylated NPs, fluorescence lifetime measurements and quenching experiments suggest that the adsorbed HSA molecules are buried within the PEG shell. For FIB adsorption onto PEGylated NPs, even less change in NP diameter was observed. In vitro uptake of the NPs by 3T3 fibroblasts was reduced to around 10% upon PEGylation with PEG chains of 10 kDa. Thus, even though the PEG coatings did not completely prevent protein adsorption, the PEGylated NPs still displayed a pronounced reduction of cellular uptake with respect to bare NPs, which is to be expected if the adsorbed proteins are not exposed on the NP surface.

Preparation of compact nanoparticle clusters from polyethylene glycol-coated gold nanoparticles by fine-tuning colloidal interactions

Low-molecular weight polyethylene glycol (PEG) has a lower critical solution temperature well outside the boiling point of water at ambient pressure, but it can be reduced at high ionic strengths. We extend this concept to trigger the clustering of gold nanoparticles through the control of colloidal interactions. At high ionic strengths, low-molecular weight (<2000 Da) mPEG-SH-modified gold nanoparticles show clustering with an increase in the solution temperature. The clustering temperature decreases with an increasing ionic strength. The clustering is attributed to the delicate interplay between the high ionic strength and elevated temperature and is interpreted in terms of chain collapse of the surface-grafted PEG molecules. The chain collapse results in a change in the steric interaction term, whereas the high ionic strength eliminates the double-layer repulsion between the particles. The observations are backed by nanoparticle interaction model calculations. We found that the intermediate attractive potential on the order of a few kT allows the experimental fabrication of compact nanoparticle clusters in agreement with theoretical predictions. The approach presented here has the potential to be extended on the externally triggered preparation of nanoparticle clusters with different types of nanoparticles.

Hybrid integrated label-free chemical and biological sensors

Label-free sensors based on electrical, mechanical and optical transduction methods have potential applications in numerous areas of society, ranging from healthcare to environmental monitoring. Initial research in the field focused on the development and optimization of various sensor platforms fabricated from a single material system, such as fiber-based optical sensors and silicon nanowire-based electrical sensors. However, more recent research efforts have explored designing sensors fabricated from multiple materials. For example, synthetic materials and/or biomaterials can also be added to the sensor to improve its response toward analytes of interest. By leveraging the properties of the different material systems, these hybrid sensing devices can have significantly improved performance over their single-material counterparts (better sensitivity, specificity, signal to noise, and/or detection limits). This review will briefly discuss some of the methods for creating these multi-material sensor platforms and the advances enabled by this design approach.

Optimization of PEGylated nanoemulsions for improved pharmacokinetics of BCS class II compounds

The objective of the study was the optimization of nanoemulsion formulations to prevent their rapid systemic clearance after intravenous administration. An amphiphilic PEG derivative DSPE-PEG (1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-methoxy-poly(polyethylene glycol) with different chain lengths and concentration was used as a nanoemulsion droplet surface modifier. The danazol loading in all nanoemulsions was kept on the same level of ∼2 mg/mL. In the present investigation, PEGylated and non-PEGylated nanoemulsions were compared in vitro phagocytosis by incubating with lung macrophages and in vivo after intravenous administration in rats. Danazol-containing nanoemulsions (NE) modified with various PEG chain lengths (2000-10 000) and concentrations (3-12 mg/mL) were prepared and characterized. Nanoemulsion droplets were reproducibly obtained in the size range of 213-340 nm. The non-PEGylated NE had the surface charge of -25.4 mV. This absolute charge value decreased with increasing chain length and concentration. With increase in chain length and density the macrophage uptake decreased which could be due to decrease in surface charge and hydrophilicity of droplets. The greatest shielding of the NE droplets was reached with DSPE-PEG5000 at the concentration of 6 mg/mL where the surface charge changed to -1.27 mV. Following intravenous administration a maximum danazol exposure (401 ± 68.2 h ng/mL) was observed with the lowest clearance rate (5.06 ± 0.95 L/h/kg) from 6 mg/mL DSPE-PEG5000 nanoemulsion. PEG5000 and PEG10000 altered the pharmacokinetic of danazol by decreasing clearance and volume of distribution which is likely explained by the presence of hydrophilic shields around the droplets that prevent their rapid systemic clearance and tissue partitioning.