Surface roughness rather than surface chemistry essentially affects insect adhesion

Experimental evidence supports the ability of spotted lanternfly to hitchhike on vehicle exteriors as a mechanism for anthropogenic dispersal

Historically, anecdotal observations support the likelihood of human-assisted invasive insect dispersal to new environments. No previous studies have investigated the ability of insects to remain attached to moving vehicles; however, such information is critical for prioritizing research, mitigation activities and understanding anthropogenic effects on biotic communities. Lycorma delicatula (White), spotted lanternfly (SLF), an invasive insect whose range is currently expanding throughout the United States, is commonly observed in urban settings and near transportation hubs. We developed a novel method to test SLF's ability to remain on vehicle surfaces including bonnet, nose wing, windscreen, wipers and scuttle panel using laminar wind flow from 0 to 100 ± 5 km h-1. We found all mobile life stages (nymphs and adults) could remain on the vehicle up to 100 km h-1. First instar nymphs and early season adults remained attached at significantly higher wind speeds than other stages. A brief acclimatization period prior to wind delivery increased attachment duration for all life stages except later season adults. The importance of outliers in the success of invasive species is well established. Given these results, any hitchhiking SLF could potentially establish incipient populations. This methodology will be beneficial for exploring human-assisted dispersal of other invasive arthropods.

Interaction of a non-axisymmetric artificial single spatula with rough surfaces

Hair-like attachment structures are frequently used by animals to create stable contact with rough surfaces. Previous studies focused primarily on axisymmetric biomimetic models of artificial spatulas, such as those with a mushroom-shaped and cylinder-shaped geometry, in order to simulate the so-called gecko effect. Here, two geometric prototypes of artificial adhesive structures with non-axisymmetric properties were designed. The investigation of the prototype's interactions with rough surfaces was carried out using the finite element software ABAQUS. Under increasing vertical displacement, the effect of asperity size on the contact pressure evolution of the spatula was investigated. It has been demonstrated that the contact behaviour is greatly affected by the flexibility of the spatula, which is caused by its variable thickness. The thinner spatula shows a higher nominal contact area and attaches more strongly to various rough surfaces. Although a thicker spatula is more susceptible to the 'leverage' phenomenon, which occurs when excessively applied displacements prematurely reduce the nominal contact area, it obtains the ability to regulate attachment during unidirectional loading. Two non-axisymmetric prototypes provide different design concepts for the artificial adhesives. It is hoped that this study will provide fresh viewpoints and innovations that contribute to the development of biologically inspired adhesives.

Insect attachment on waxy plant surfaces: the effect of pad contamination by different waxes

This study focuses on experimental testing of the contamination hypothesis and examines how the contamination of insect adhesive pads with three-dimensional epicuticular waxes of different plant species contributes to the reduction of insect attachment. We measured traction forces of tethered Chrysolina fastuosa male beetles having hairy adhesive pads on nine wax-bearing plant surfaces differing in both shape and dimensions of the wax structures and examined insect adhesive organs after they have contacted waxy substrates. For comparison, we performed the experiments with the same beetle individuals on a clean glass sample just before (gl1) and immediately after (gl2) the test on a plant surface. The tested insects showed a strong reduction of the maximum traction force on all waxy plant surfaces compared to the reference experiment on glass (gl1). After beetles have walked on waxy plant substrates, their adhesive pads were contaminated with wax material, however, to different extents depending on the plant species. The insects demonstrated significantly lower values of both the maximum traction force and the first peak of the traction force and needed significantly longer time to reach the maximum force value in the gl2 test than in the gl1 test. These effects were especially pronounced in cases of the plant surfaces covered with wax projections having higher aspect ratios. The data obtained clearly indicated the impact of waxy plant surfaces on the insect ability to subsequently attach to the clean smooth surface. This effect is caused by the contamination of adhesive pads and experimentally supports the contamination hypothesis.

Mechanoecology: biomechanical aspects of insect-plant interactions

Plants and herbivorous insects as well as their natural enemies, such as predatory and parasitoid insects, are united by intricate relationships. During the long period of co-evolution with insects, plants developed a wide diversity of features to defence against herbivores and to attract pollinators and herbivores' natural enemies. The chemical basis of insect-plant interactions is established and many examples are studied, where feeding and oviposition site selection of phytophagous insects are dependent on the plant's secondary chemistry. However, often overlooked mechanical interactions between insects and plants can be rather crucial. In the context of mechanoecology, the evolution of plant surfaces and insect adhesive pads is an interesting example of competition between insect attachment systems and plant anti-attachment surfaces. The present review is focused on mechanical insect-plant interactions of some important pest species, such as the polyphagous Southern Green Stinkbug Nezara viridula and two frugivorous pest species, the polyphagous Mediterranean fruit fly Ceratitis capitata and the monophagous olive fruit fly Bactrocera oleae. Their ability to attach to plant surfaces characterised by different features such as waxes and trichomes is discussed. Some attention is paid also to Coccinellidae, whose interaction with plant leaf surfaces is substantial across all developmental stages in both phytophagous and predatory species that feed on herbivorous insects. Finally, the role of different kinds of anti-adhesive nanomaterials is discussed. They can reduce the attachment ability of insect pests to natural and artificial surfaces, potentially representing environmental friendly alternative methods to reduce insect pest impact in agriculture.

Combatting biofilms in potable water systems: A comprehensive overview to ensuring industrial water safety

Biofilm formation in industrial potable water systems, encompassing applications such as drinking, emergency showers, firefighting and sanitary appliances, presents a multifaceted challenge that has significant implications for both equipment efficiency and human health. These microbial communities, comprised of bacteria, fungi and protozoa, adhere to surfaces and are embedded within an extracellular matrix, primarily of polysaccharide origin. The formation and persistence of these biofilms can lead to reduced system efficiency and potential health risks due to microbial-induced corrosion, contamination and waterborne pathogens. This review delves into the physicochemical and microbial factors promoting biofilm growth in these systems and elucidates contemporary strategies for their control and eradication. By harnessing advanced methodologies, including state-of-the-art filtration, disinfection techniques and predictive monitoring, stakeholders can proactively address biofilm-related challenges. The emphasis of this comprehensive overview is on the interdisciplinary nature of biofilm growth, combining insights from microbiology, engineering and water chemistry to pave the way for an integrative approach to ensuring consistent industrial water quality.

Characterization of Morphologically Distinct Components in the Tarsal Secretion of Medauroidea extradentata (Phasmatodea) Using Cryo-Scanning Electron Microscopy

Attachment to the substrate is an important phenomenon that determines the survival of many organisms. Most insects utilize wet adhesion to support attachment, which is characterized by fluids that are secreted into the interface between the tarsus and the substrates. Previous research has investigated the composition and function of tarsal secretions of different insect groups, showing that the secretions are likely viscous emulsions that contribute to attachment by generating capillary and viscous adhesion, leveling surface roughness and providing self-cleaning of the adhesive systems. Details of the structural organization of these secretions are, however, largely unknown. Here, we analyzed footprints originating from the arolium and euplantulae of the stick insect Medauroidea extradentata using cryo-scanning electron microscopy (cryo-SEM) and white light interferometry (WLI). The secretion was investigated with cryo-SEM, revealing four morphologically distinguishable components. The 3D WLI measurements of the droplet shapes and volumes over time revealed distinctly different evaporation rates for different types of droplets. Our results indicate that the subfunctionalization of the tarsal secretion is facilitated by morphologically distinct components, which are likely a result of different proportions of components within the emulsion. Understanding these components and their functions may aid in gaining insights for developing adaptive and multifunctional biomimetic adhesive systems.

Biofilms Controlling in Industrial Cooling Water Systems: A Mini-Review of Strategies and Best Practices

Biofilm formation and growth is a significant concern for water treatment professionals, as it can lead to the contamination of water systems and pose a threat to public health. Biofilms are complex communities of microorganisms that adhere to surfaces and are embedded in an extracellular matrix of polysaccharides and proteins. They are notoriously difficult to control, as they provide a protective environment for bacteria, viruses, and other harmful organisms to grow and proliferate. This review article highlights some of the factors that favor biofilm growth, as well as various strategies for controlling biofilm in water systems. Adopting the best available technologies, such as wellhead protection programs, proper industrial cooling water system maintenance, and filtration and disinfection, can prevent the formation and growth of biofilms in water systems. A comprehensive and multifaceted approach to biofilm control can reduce the occurrence of biofilms and ensure the delivery of high-quality water to the industrial process.

The tight attachment achieved by the male discoidal setae is possibly a counter-adaptation to the grease layer on female integument surfaces in green dock beetles

Green dock beetles Gastrophysa viridula exhibit sexual dimorphism in tarsal attachment setae: females have only pointed, lanceolate and spatula-like setae, while males additionally possess discoidal ones. The sexual dimorphism is probably attributed to the necessity of male discoidal setae to adhere to the smooth back of the female during copulation. We aimed to understand its possible mechanism of attachment with G. viridula. Pull-off forces of both females and males were measured on (i) alive females, (ii) dead and dried females, and (iii) resin replicas of fresh females. The attachment ability tended to increase on dead and replicated female surfaces in both sexes, which indicates that the epicuticular grease layer on the integument of alive intact beetles decreases the attachment. This tendency was prominent in females. The present study clearly showed that in G. viridula discoidal setae enable the males to adhere stronger to female surfaces. The divergent performance found between the sexes differing in their setal composition is probably caused by the stiffness difference between the setae types and by the specific shape of the setal tips. A peculiar reproductive biology in G. viridula is probably attributed to this remarkable divergence of labour in their attachment pads between the sexes.

Leaves that walk and eggs that stick: comparative functional morphology and evolution of the adhesive system of leaf insect eggs (Phasmatodea: Phylliidae)

Phylliidae are herbivorous insects exhibiting impressive cryptic masquerade and are colloquially called "walking leaves". They imitate angiosperm leaves and their eggs often resemble plant seeds structurally and in some cases functionally. Despite overall morphological similarity of adult Phylliidae, their eggs reveal a significant diversity in overall shape and exochorionic surface features. Previous studies have shown that the eggs of most Phylliidae possess a specialised attachment mechanism with hierarchical exochorionic fan-like structures (pinnae), which are mantled by a film of an adhesive secretion (glue). The folded pinnae and glue respond to water contact, with the fibrous pinnae expanding and the glue being capable of reversible liquefaction. In general, the eggs of phylliids appear to exhibit varying structures that were suggested to represent specific adaptations to the different environments the eggs are deposited in. Here, we investigated the diversity of phylliid eggs and the functional morphology of their exochorionic structure. Based on the examination of all phylliid taxa for which the eggs are known, we were able to characterise eleven different morphological types. We explored the adhesiveness of these different egg morphotypes and experimentally compared the attachment performance on a broad range of substrates with different surface roughness, surface chemistry and tested whether the adhesion is replicable after detachment in multiple cycles. Furthermore, we used molecular phylogenetic methods to reconstruct the evolutionary history of different egg types and their adhesive systems within this lineage, based on 53 phylliid taxa. Our results suggest that the egg morphology is congruent with the phylogenetic relationships within Phylliidae. The morphological differences are likely caused by adaptations to the specific environmental requirements for the particular clades, as the egg morphology has an influence on the performance regarding the surface roughness. Furthermore, we show that different pinnae and the adhesive glue evolved convergently in different species. While the evolution of the Phylliidae in general appears to be non-adaptive judging on the strong similarity of the adults and nymphs of most species, the eggs represent a stage with complex and rather diverse functional adaptations including mechanisms for both fixation and dispersal of the eggs.

Influence of surface free energy of the substrate and flooded water on the attachment performance of stick insects (Phasmatodea) with different adhesive surface microstructures

Stick and leaf insects (Phasmatodea) are exclusively herbivores. As they settle in a broad range of habitats, they need to attach to and walk on a wide variety of plant substrates, which can vary in their surface free energy (SFE). The adhesive microstructures (AMs) on the euplantulae of phasmids are assumed to be adapted to such substrate properties. Moreover, the natural substrates can often be covered with water as a result of high relative humidity or rain. Although considerable experimental research has been carried out on different aspects of stick insect attachment, the adaptations to cope with the influence of flooded water on attachment performance remain unclear. To elucidate the role of AMs in this context, we here measured attachment forces in three species of stick insects with different AMs. The results show that attachment forces of the three species studied were influenced by the SFE and the presence of water: they all showed higher pull-off (vertical) and traction (horizontal) forces on dry surfaces, compared with when the surfaces were covered with a water film. However, the extent to which the surface properties influenced attachment differed depending on the species and its AMs. All three species showed approximately the same attachment performance on dry surfaces with different surface free energy but maintained attachment underwater to different extents.

Mini-Review of Biofilm Interactions with Surface Materials in Industrial Piping System

The growth of biofilm, which is caused by microorganism accumulation and growth on wetted surfaces, may damage industrial piping systems, increase maintenance and cleaning costs for the system sterilization, and even divulge the immune system into high risk. This article systematically analyzes the biofilm interactions with piping surface materials from the perspectives of physical convection, and biological and chemical adhesion. The thermodynamics of the flow, bacterial surface sensing, and bio-communication are the most critical factors for biofilm attachment. Furthermore, experimental analysis methods as well as biofilm control and removal approaches, are also included in this study. Finally, the resistance and growth of biofilm, as well as the practical and advanced methodology to control the biofilm and challenges associated with technology, are also discussed. Moreover, this paper may also offer a significant reference for the practice and strategic applications to address the biofilm resistance issues in industrial piping.

Bio-inspired materials to control and minimise insect attachment

More than three quarters of all animal species on Earth are insects, successfully inhabiting most ecosystems on the planet. Due to their opulence, insects provide the backbone of many biological processes, but also inflict adverse impacts on agricultural and stored products, buildings and human health. To countermeasure insect pests, the interactions of these animals with their surroundings have to be fully understood. This review focuses on the various forms of insect attachment, natural surfaces that have evolved to counter insect adhesion, and particularly features recently developed synthetic bio-inspired solutions. These bio-inspired solutions often enhance the variety of applicable mechanisms observed in nature and open paths for improved technological solutions that are needed in a changing global society.

Studying Stickiness: Methods, Trade-Offs, and Perspectives in Measuring Reversible Biological Adhesion and Friction

Controlled, reversible attachment is widely spread throughout the animal kingdom: from ticks to tree frogs, whose weights span from 2 mg to 200 g, and from geckos to mosquitoes, who stick under vastly different situations, such as quickly climbing trees and stealthily landing on human hosts. A fascinating and complex interplay of adhesive and frictional forces forms the foundation of attachment of these highly diverse systems to various substrates. In this review, we present an overview of the techniques used to quantify the adhesion and friction of terrestrial animals, with the aim of informing future studies on the fundamentals of bioadhesion, and motivating the development and adoption of new or alternative measurement techniques. We classify existing methods with respect to the forces they measure, including magnitude and source, i.e., generated by the whole body, single limbs, or by sub-structures. Additionally, we compare their versatility, specifically what parameters can be measured, controlled, and varied. This approach reveals critical trade-offs of bioadhesion measurement techniques. Beyond stimulating future studies on evolutionary and physicochemical aspects of bioadhesion, understanding the fundamentals of biological attachment is key to the development of biomimetic technologies, from soft robotic grippers to gentle surgical tools.

An investigation of gecko attachment on wet and rough substrates leads to the application of surface roughness power spectral density analysis

The roughness and wettability of surfaces exploited by free-ranging geckos can be highly variable and attachment to these substrates is context dependent (e.g., presence or absence of surface water). Although previous studies focus on the effect of these variables on attachment independently, geckos encounter a variety of conditions in their natural environment simultaneously. Here, we measured maximum shear load of geckos in air and when their toes were submerged underwater on substrates that varied in both surface roughness and wettability. Gecko attachment was greater in water than in air on smooth and rough hydrophobic substrates, and attachment to rough hydrophilic substrates did not differ when tested in air or water. Attachment varied considerably with surface roughness and characterization revealed that routine measurements of root mean square height can misrepresent the complexity of roughness, especially when measured with single instruments. We used surface roughness power spectra to characterize substrate surface roughness and examined the relationship between gecko attachment performance across the power spectra. This comparison suggests that roughness wavelengths less than 70 nm predominantly dictate gecko attachment. This study highlights the complexity of attachment in natural conditions and the need for comprehensive surface characterization when studying biological adhesive system performance.

The effects of substrate porosity, mechanical substrate properties and loading conditions on the attachment performance of the Mediterranean medicinal leech (Hirudo verbana)

The ectoparasitic lifestyle of the Mediterranean medicinal leech (Hirudo verbana) requires reliable functioning of its attachment organs (i.e. anterior and posterior suction discs) on multiple habitat- and host-specific surfaces under both normal and shear stresses. In addition to some intrinsic properties of the attachment devices, however, only a few extrinsic factors (e.g. substrate roughness and porosity) have been considered in previous studies on leech suckers. Using centrifugal force experiments, we analysed the attachment performance of H. verbana under different types of loading on artificial substrates differing in porosity and their mechanical properties. Whereas the substrate porosity significantly influenced leech attachment under normal and shear loading, the different mechanical properties did not noticeably affect attachment within the considered parameter limits. Furthermore, suction was confirmed to be the primary attachment mechanism independent of the prevailing loading condition. The question of whether the suction cups of H. verbana are adapted to a specific loading condition could not be answered. In any case, our results again highlight the high functional resilience of leech suckers guaranteeing a successful ectoparasitic lifestyle.

Underwater Attachment of the Water-Lily Leaf Beetle Galerucella nymphaeae (Coleoptera, Chrysomelidae)

While the reversible attachment of artificial structures underwater has moved into the focus of many recent publications, the ability of organisms to walk on and attach to surfaces underwater remains almost unstudied. Here, we describe the behaviour of the water-lily leaf beetle Galerucella nymphaeae when it adheres to surfaces underwater and compare its attachment properties on hydrophilic and hydrophobic surfaces underwater and in the air. The beetles remained attached to horizontal leaves underwater for a few minutes and then detached. When the leaf was inclined, the beetles started to move upward immediately. There was no difference in the size of the tarsal air bubble visible beneath the beetles’ tarsi underwater, between a hydrophilic (54° contact angle of water) and a hydrophobic (99°) surface. The beetles gained the highest traction forces on a hydrophilic surface in the air, the lowest on a hydrophobic surface in air, and intermediate traction on both surfaces underwater. The forces measured on both surfaces underwater did not differ significantly. We discuss factors responsible for the observed effects and conclude that capillary forces on the tarsal air bubble might play a major role in the adhesion to the studied surfaces.

Wetting of the tarsal adhesive fluid determines underwater adhesion in ladybird beetles

Many insects can climb smooth surfaces using hairy adhesive pads on their legs, mediated by tarsal fluid secretions. It was previously shown that a terrestrial beetle can even adhere and walk underwater. The naturally hydrophobic hairs trap an air bubble around the pads, allowing the hairs to make contact with the substrate as in air. However, it remained unclear to what extent such an air bubble is necessary for underwater adhesion. To investigate the role of the bubble, we measured the adhesive forces in individual legs of live but constrained ladybird beetles underwater in the presence and absence of a trapped bubble and compared these with its adhesion in air. Our experiments revealed that on a hydrophobic substrate, even without a bubble, the pads show adhesion comparable to that in air. On a hydrophilic substrate, underwater adhesion is significantly reduced, with or without a trapped bubble. We modelled the adhesion of a hairy pad using capillary forces. Coherent with our experiments, the model demonstrates that the wetting properties of the tarsal fluid alone can determine the ladybird beetles' adhesion to smooth surfaces in both air and underwater conditions and that an air bubble is not a prerequisite for their underwater adhesion. This study highlights how such a mediating fluid can serve as a potential strategy to achieve underwater adhesion via capillary forces, which could inspire artificial adhesives for underwater applications.

Liquid bridge splitting enhances normal capillary adhesion and resistance to shear on rough surfaces

HYPOTHESIS

'Bridge splitting' is considered in the case of capillary adhesion: a fixed total volume of liquid is split into multiple capillary bridges. Previous studies have shown that bridge splitting only enhances the capillary-induced adhesion force between two planar surfaces in specific circumstances. We hypothesise that bridge splitting significantly enhances the total adhesion force between rough surfaces, since mobile wetting bridges can naturally migrate to narrower gaps. This migration of capillary bridges should also provide a resistance to shear.

NUMERICAL EXPERIMENTS

We theoretically consider an idealized system of many liquid bridges confined between two solid surfaces. By numerically calculating the shape of a single bridge, the total adhesion force is found as the number of bridges and roughness are varied. The resistance to shear is also calculated in the limit of strong surface tension or small shears.

FINDINGS

Bridge splitting on a rough surface significantly enhances the adhesion force, with an enhancement that increases with the amplitude of the roughness; maximising over the number of bridges can increase the total adhesion force by an order of magnitude. Resistance to shear is shown to increase linearly with the translation velocity, and the behaviour of many such shearing bridges is quantified.

Surface chemistry of the ladybird beetle adhesive foot fluid across various substrates

Nature has coevolved highly adaptive and reliable bioadhesives across a multitude of animal species. Much attention has been paid in recent years to selectively mimic these adhesives for the improvement of a variety of technologies. However, very few of the chemical mechanisms that drive these natural adhesives are well understood. Many insects combine hairy feet with a secreted adhesive fluid, allowing for adhesion to considerably rough and slippery surfaces. Insect adhesive fluids have evolved highly specific compositions which are consistent across most surfaces and optimize both foot adhesion and release in natural environments. For example, beetles are thought to have adhesive fluids made up of a complex molecular mixture containing both hydrophobic and hydrophilic parts. We hypothesize that this causes the adhesive interface to be dynamic, with molecules in the fluid selectively organizing and ordering at surfaces with complimentary hydrophobicity to maximize adhesion. In this study, we examine the adhesive fluid of a seven-spotted ladybird beetle with a surface-sensitive analytical technique, sum frequency generation spectroscopy, as the fluid interacts with three substrates of varied wettabilities. The resulting spectra present no evidence of unique molecular environments between hydrophilic and hydrophobic surfaces but exhibit significant differences in the ordering of hydrocarbons. This change in surface interactions across different substrates correlates well with traction forces measured from beetles interacting with substrates of increasing hydrophobicities. We conclude that insect adhesion is dependent upon a dynamic molecular-interfacial response to an environmental surface.

Hairy-Layer Friction Reduction Mechanism in the Honeybee Abdomen

Abdominal sections of honeybees undergo numerous reciprocating motions during their lifetime. However, the overlapped contact areas adjacent to the abdominal sections have a shallow wear extent, a physical mechanism that remains obscure to date. Therefore, this study explored a biofrictional reduction model based on a solid surface texture and the hairy surface of the honeybee abdomen. We collected honeybee samples and observed their abdomens using a camera (Zeiss Stemi 508). Subsequently, we sliced these samples using a microtome and detected their microscopic friction. The exterior surface of the honeybee abdomen was not smooth but was distributed with a dense microvilli structure, which played a vital role in adjusting the friction reduction characteristics between the abdominal sections. When the adjacent abdominal sections moved relatively to each other, their upper and lower surfaces were not in direct rigid contact. Briefly, this study shows that the microscale hair arrays on the surface of the posterior abdominal segment can significantly reduce real contact area and friction, which considerably decreases wear or abrasion. The friction reduction mechanism alleviates the abrasion during the relative bending movement and saves a large amount of energy, which is essential for the honeybees' daily activities. This microtexture compliance friction reduction characteristic could be used to fabricate hierarchical surfaces for long-lasting friction reduction mechanisms, which increase the life of soft devices, including soft actuators and hinges.

Biological and Physiochemical Methods of Biofilm Adhesion Resistance Control of Medical-Context Surface

The formation of biofilms on medical-context surfaces gives the EPS embedded bacterial community protection and additional advantages that planktonic cells would not have such as increased antibiotic resistance and horizontal gene transfer. Bacterial cells tend to attach to a conditioning layer after overcoming possible electrical barriers and go through two phases of attachments: reversible and irreversible. In the first, bacterial attachment to the surface is reversible and occurs quickly whilst the latter is permanent and takes place over a longer period of time. Upon reaching a certain density in the bacterial community, quorum sensing causes phenotypical changes leading to a loss in motility and the production of EPS. This position paper seeks to address the problem of bacterial adhesion and biofilm formation for the medical surfaces by comparing inhabiting physicochemical interactions and biological mechanisms. Several physiochemical methodologies (e.g. ultrasonication, alternating magnetic field and chemical surface coating) and utilizing biological mechanisms (e.g. quorum quenching and EPS degrading enzymes) were suggested. The possible strategical applications of each category were suggested and evaluated to a balanced position to possibly eliminate the adhesion and formation of biofilms on medical-context surfaces.

Insect Antiadhesive Surfaces Using Electrosprayed Wrinkled Ethyl Cellulose Particles

A range of plants developed leaves, the surfaces of which prevent or diminish insect adhesion due to their microscopic topography. Well known examples include the leaves of the lychee tree (Litchi chinensis). Here, we report a method to coat substrates with ethyl cellulose microparticles that exhibit wrinkled surfaces, resulting in surface morphologies that closely resemble those of insect repelling plants, i.e., Litchi chinensis. The microparticles were prepared by electrospraying, a method that allowed tuning of the particle size and surface morphology. By measuring the traction forces of Colorado potato beetles walking on these surfaces, the wrinkly microsphere parameters were optimized, resulting in biomimetic surfaces that surpass the antiadhesive properties of the biological role model. This study may pave the way to sustainable, nontoxic insecticide replacements.

Sticking to it: testing passive pull-off forces in waterfall-climbing fishes across challenging substrates

The pelvic sucker of Hawaiian waterfall climbing gobies allows these fishes to attach to substrates while climbing waterfalls tens to hundreds of meters tall. Climbing ability varies by species and may be further modulated by the physical characteristics of the waterfall substrate. In this study, we investigated the influence of surface wettability (hydrophobic versus hydrophilic surface charges) and substrate roughness on the passive adhesive system of four species of gobies with different climbing abilities. Overall, passive adhesive performance varied by species and substrate, with the strongest climbers showing the highest shear pull-off forces, particularly on rough surfaces. Thus, differences in passive adhesive performance may help to explain the ability of some species to migrate further upstream than others and contribute to their ability to invade new habitats.

Multifunctional Adhesives on the Eggs of the Leaf Insect Phyllium philippinicum (Phasmatodea: Phylliidae): Solvent Influence and Biomimetic Implications

Leaf insects (Phylliidae) are well-camouflaged terrestrial herbivores. They imitate leaves of plants almost perfectly and even their eggs resemble seeds—visually and regarding to dispersal mechanisms. The eggs of the leaf insect Phyllium philippinicum utilize an adhesive system with a combination of glue, which can be reversibly activated through water contact and a water-responding framework of reinforcing fibers that facilitates their adjustment to substrate asperities and real contact area enhancement. So far, the chemical composition of this glue remains unknown. To evaluate functional aspects of the glue–solvent interaction, we tested the effects of a broad array of chemical solvents on the glue activation and measured corresponding adhesive forces. Based on these experiments, our results let us assume a proteinaceous nature of the glue with different functional chemical subunits, which enable bonding of the glue to both the surface of the egg and the unpredictable substrate. Some chemicals inhibited adhesion, but the deactivation was always reversible by water-contact and in some cases yielded even higher adhesive forces. The combination of glue and fibers also enables retaining the adhesive on the egg, even if detached from the egg’s surface. The gained insights into this versatile bioadhesive system could hereafter inspire further biomimetic adhesives.

Variation of attachment ability of Nezara viridula (Hemiptera: Pentatomidae) during nymphal development and adult aging

The present investigation reports data on the attachment ability of the Southern green stink bug Nezara viridula (Hemiptera: Pentatomidae), a relevant pest in the world, along its whole life cycle. Using a centrifugal force tester, we evaluated a) the differences in the attachment ability among the four active nymphal developmental instars (N2-N5 nymphs) and adult to hydrophilic glass, showing an increased attachment ability during ontogenesis, owing to increased pulvilli size and efficiency; b) the possible role of growth and body shape on insect attachment ability on hydrophilic glass during the intermoult period, revealing that N. viridula nymphs attach stronger (higher safety factor) in the first part of the intermoult period; c) the age-specific differences in the attachment ability of adults of both sexes on hydrophilic glass, showing the best performance at an intermediate age, in agreement with a higher proportion of resilin in comparison with younger or older insects; d) the difference in attachment ability on hydrophilic vs. hydrophobic glass along the insect development, revealing a strong effect of surface hydrophobicity on reducing the attachment of N. viridula nymphs and adults. The results on the attachment ability of a hemimetabolous insect along its life cycle are relevant because they 1) shed light on different adaptations of attachment pads in relation to insect size, shape and age; 2) deepen the knowledge on the functional morphological adaptations, thus potentially contributing to the development of suitable control systems for this important pest insect.

Geckos cling best to, and prefer to use, rough surfaces

BACKGROUND

Fitness is strongly related to locomotor performance, which can determine success in foraging, mating, and other critical activities. Locomotor performance on different substrates is likely to require different abilities, so we expect alignment between species' locomotor performance and the habitats they use in nature. In addition, we expect behaviour to enhance performance, such that animals will use substrates on which they perform well.

METHODS

We examined the associations between habitat selection and performance in three species of Oedura geckos, including two specialists, (one arboreal, and one saxicolous), and one generalist species, which used both rocks and trees. First, we described their microhabitat use in nature (tree and rock type) for these species, examined the surface roughnesses they encountered, and selected materials with comparable surface microtopographies (roughness measured as peak-to-valley heights) to use as substrates in lab experiments quantifying behavioural substrate preferences and clinging performance.

RESULTS

The three Oedura species occupied different ecological niches and used different microhabitats in nature, and the two specialist species used a narrower range of surface roughnesses compared to the generalist. In the lab, Oedura geckos preferred substrates (coarse sandpaper) with roughness characteristics similar to substrates they use in nature. Further, all three species exhibited greater clinging performance on preferred (coarse sandpaper) substrates, although the generalist used fine substrates in nature and had good performance capabilities on fine substrates as well.

CONCLUSION

We found a relationship between habitat use and performance, such that geckos selected microhabitats on which their performance was high. In addition, our findings highlight the extensive variation in surface roughnesses that occur in nature, both among and within microhabitats.

Adhesion Performance in the Eggs of the Philippine Leaf Insect Phyllium Philippinicum (Phasmatodea: Phylliidae)

Leaf insects (Phasmatodea: Phylliidae) exhibit perfect crypsis imitating leaves. Although the special appearance of the eggs of the species Phyllium philippinicum, which imitate plant seeds, has received attention in different taxonomic studies, the attachment capability of the eggs remains rather anecdotical. We herein elucidate the specialized attachment mechanism of the eggs of this species and provide the first experimental approach to systematically characterize the functional properties of their adhesion by using different microscopy techniques and attachment force measurements on substrates with differing degrees of roughness and surface chemistry, as well as repetitive attachment/detachment cycles while under the influence of water contact. We found that a combination of folded exochorionic structures (pinnae) and a film of adhesive secretion contribute to attachment, which both respond to water. Adhesion is initiated by the glue, which becomes fluid through hydration, enabling adaption to the surface profile. Hierarchically structured pinnae support the spreading of the glue and reinforcement of the film. This combination aids the egg’s surface in adapting to the surface roughness, yet the attachment strength is additionally influenced by the egg’s surface chemistry, favoring hydrophilic substrates. Repetitive detachment and water-mediated adhesion can optimize the location of the egg to ensure suitable environmental conditions for embryonic development. Furthermore, this repeatable and water-controlled adhesion mechanism can stimulate further research for biomimeticists, ecologists and conservationalists.

Role of Fruit Epicuticular Waxes in Preventing Bactrocera oleae (Diptera: Tephritidae) Attachment in Different Cultivars of Olea europaea

The olive fruit fly Bactrocera oleae (Diptera: Tephritidae) is the major pest of cultivated olives (Olea europaea L.), and a serious threat in all of the Mediterranean Region. In the present investigation, we demonstrated with traction force experiments that B. oleae female adhesion is reduced by epicuticular waxes (EWs) fruit surface, and that the olive fruit fly shows a different ability to attach to the ripe olive surface of different cultivars of O. europaea (Arbequina, Carolea, Dolce Agogia, Frantoio, Kalamata, Leccino, Manzanilla, Picholine, Nostrale di Rigali, Pendolino and San Felice) in terms of friction force and adhesion, in relation with different mean values of olive surface wettability. Cryo-scanning morphological investigation revealed that the EW present on the olive surface of the different analyzed cultivars are represented by irregular platelets varying in the orientation, thus contributing to affect the surface microroughness and wettability in the different cultivars, and consequently the olive fruit fly attachment. Further investigations to elucidate the role of EW in olive varietal resistance to the olive fruit fly in relation to the olive developmental stage and environmental conditions could be relevant to develop control methods alternative to the use of harmful pesticides.

Porous substrate affects a subsequent attachment ability of the beetle Harmonia axyridis (Coleoptera, Coccinellidae)

According to literature data, porous substrates can cause a reduction of insect attachment ability. We carried out traction experiments with adult ladybird beetles Harmonia axyridis on the smooth solid glass sample and rough porous Al₂O₃ membrane to prove the primary effect of absorption of the insect pad secretion by porous media, rather than surface roughness, on the attachment force on the porous sample. With each insect individual, a set of five experiments was conducted: (1) on glass; (2) on the porous membrane; (3-5) on glass immediately after the test on the porous surface, then after 30 min and 1 h of recovery time. On the porous substrate, the forces, being similar in females and males, were greatly reduced compared to those measured on glass. A significant difference between the force values obtained in the first (before the test on the porous sample) and second (immediately after the experiment on the porous sample) tests on glass was observed. After 30 min recovery time, beetles completely regained their attachment ability. Females produced significantly lower forces than males in all experiments on glass: the differences are probably caused by the sexual dimorphism in the microstructure of their adhesive pads. The obtained results are of fundamental importance for further application in biomimetics of novel insect-repelling surfaces and in plant protection by using porous materials.

Attachment ability of females and males of the ladybird beetle Cryptolaemus montrouzieri to different artificial surfaces

To test the effects of surface chemistry and surface roughness on the attachment ability of female and male Cryptolaemus montrouzieri beetles that are equipped with hairy adhesive pads, traction force experiments were performed on three artificial substrates: (1) hydrophobic smooth glass, (2) hydrophobic smooth epoxy resin, and (3) hydrophobic microrough epoxy resin. Also the micromorphology of the dorsal body side and adhesive pads in males and females was examined using a scanning electron microscopy. The traction force ranged from 0.13 to 3.60 mN in females and from 0.28 to 3.20 mN in males. The force values obtained on different test substrates showed highly significant differences and decreased in the following order of substrates: glass - smooth epoxy resin - microrough epoxy resin. In both females and males, the effect of surfaces was similar. The obtained results clearly showed that both surface parameters, chemistry and roughness, affected the attachment ability of beetles. Similar microstructure of adhesive pads in both sexes resulted in similar attachment performance of males and females on all test substrates.

Mechanical ecology of fruit-insect interaction in the adult Mediterranean fruit fly Ceratitis capitata (Diptera: Tephritidae)

Fruit features represent a trade-off between dispersal and protection against frugivore insects. To prevent insect attack, plants evolved chemical and physical barriers, mainly studied in leaves, while limited knowledge is available for fruits, especially concerning mechanical barriers. We used the Mediterranean fruit fly to shed light on the mechanical ecology of insect-fruit attachment in a pest species. We tested the following hypotheses: is there any sexual dimorphism in attachment devices and attachment ability? Can the attachment ability of females of Ceratitis capitata to fruits of various host plants vary according to fruit surfaces with different morphology (smooth, hairy, waxy) or physico-chemical properties? The tarsal attachment devices were studied using Cryo-SEM and TEM. The maximum friction forces of C. capitata females on fruit surfaces of typical host plants were evaluated using a load cell force transducer. The attachment ability of both sexes on artificial surfaces was evaluated using a centrifugal force tester. Our data revealed sexual dimorphism in the size of pulvilli, which are wider in females. A higher friction force is exerted by females in comparison with males, in agreement with the need to firmly adhere to the host plant fruit during oviposition. Among the tested fruits, the stronger friction force was recorded on hairy or rough surfaces while a force reduction was recorded on waxy fruits. To unravel the mechanical ecology of insect-plant interaction between plants and species of Tephritidae can be useful to develop non-chemical methods to control these important crop pests.

Nepenthes-inspired multifunctional nanoblades with mechanical bactericidal, self-cleaning and insect anti-adhesive characteristics

In order to reduce the widespread threat of bacterial pathogen diseases, mechanical bactericidal surfaces have been widely reported. However, few of these nanostructured surfaces were investigated from a sustainable perspective. In this study, we have prepared, inspired by the slippery zone of Nepenthes, a multifunctional nanostructured surface with mechanical bactericidal, self-cleaning and insect anti-adhesive characteristics. First, a nanoblade-like surface made of Zn-Al layered double hydroxides was prepared for achieving faster bactericidal rate and wider bactericidal spectrum (2.10 × 104 CFU cm-2 min-1 against Escherichia coli and 1.78 × 103 CFU cm-2 min-1 against Staphylococcus aureus). Then the self-cleaning and insect anti-adhesive properties were tested on the fluorosilane-modified nanoblades, leaving little cell debris remaining on the surface even after 4 continuous bactericidal experiments, and showing a slippery surface for ants to slide down in 3 s. This study not only discovers a new nature-inspired mechanical bactericidal nanotopography, but also provides a facile approach to incorporate multiple functions into the nanostructured surface for practical antibacterial applications.

Evaluation of silicone elastomers as structural materials for microstructured adhesives

Microstructured (sometimes referred to as gecko-like) adhesives have numerous advantages over flat films, especially for practical applications on non-ideal surfaces that may be uneven or contaminated with dust. However, due to interdependence among material surface and bulk properties, the best material to fabricate such adhesives is still unknown. In this work, we analyzed eleven commercially available silicone elastomers to evaluate their use as flat and microstructured adhesives to address multiple material related questions that may impact the choice of the 'best' material for microstructured dry adhesives. To illustrate the applicability of the measured properties to modeling microstructured surfaces, we use stalk-shaped microstructures, whose contact mechanics are well understood. We demonstrate that there is no correlation between the adhesion strength of flat and microstructured adhesives; while bulk dissipation is the most important factor influencing the adhesion strength of flat elastomers, after microstructurization, interface toughness becomes more important. Therefore, microstructured elastomers loaded with high surface energy additives may demonstrate higher adhesion than their flat counterparts. We also compare the adhesion of flat and microstructured silicone elastomers on rough substrates. In this case, we show that while flat elastomer adhesion decreases with increasing substrate roughness, microstructured silicone adhesion actually increases with increasing roughness up to 0.19 [Formula: see text]m. This is the first time an increase in adhesion strength on rough surfaces is reported for materials stiffer than 1.0 MPa.

Influence of surface topography attributes on settlement and adhesion of natural and synthetic species

Surface topographies of various sizes, shapes, and spatial organization abound in nature. They endow properties such as super-hydrophobicity, reversible adhesion, anti-fouling, self-cleaning, anti-glare, and anti-bacterial, just to mention a few. Researchers have long attempted to replicate these structures to create artificial surfaces with the functionalities found in nature. In this review, we decompose the attributes of surface topographies into their constituents, namely feature dimensions, geometry, and stiffness, and examine how they contribute (individually or collectively) to settlement and adhesion of natural organisms and synthetic particles on the surface. The size of features that comprise the topography affects the contact area between the particle and surface as well as its adhesion and contributes to the observed adsorptive properties of the surface. The geometry of surface perturbations can also affect the contact area and gives rise to anisotropic particle settlement. Surface topography also affects the local stiffness of the surface and governs the adhesion strength on the surface. Overall, systematically studying attributes of surface topography and elucidating how each of them affects adhesion and settlement of particles will facilitate the design of topographically-corrugated surfaces with desired adsorption characteristics.

Replicating the complexity of natural surfaces: technique validation and applications for biomimetics, ecology and evolution

The surfaces of animals, plants and abiotic structures are not only important for organismal survival, but they have also inspired countless biomimetic and industrial applications. Additionally, the surfaces of animals and plants exhibit an unprecedented level of diversity, and animals often move on the surface of plants. Replicating these surfaces offers a number of advantages, such as preserving a surface that is likely to degrade over time, controlling for non-structural aspects of surfaces, such as compliance and chemistry, and being able to produce large areas of a small surface. In this paper, we compare three replication techniques among a number of species of plants, a technical surface and a rock. We then use two model parameters (cross-covariance function ratio and relative topography difference) to develop a unique method for quantitatively evaluating the quality of the replication. Finally, we outline future directions that can employ highly accurate surface replications, including ecological and evolutionary studies, biomechanical experiments, industrial applications and improving haptic properties of bioinspired surfaces. The recent advances associated with surface replication and imaging technology have formed a foundation on which to incorporate surface information into biological sciences and to improve industrial and biomimetic applications. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology'.

A comparison of tarsal morphology and traction force in the two burying beetles Nicrophorus nepalensis and Nicrophorus vespilloides (Coleoptera, Silphidae)

Our aim was to compare friction and traction forces between two burying beetle species of the genus Nicrophorus exhibiting different attachment abilities during climbing. Specifically, the interaction of adhesive hairs and claws during attachment with respect to various surface properties was investigated by using a 2 × 3 experimental design. Traction force was measured for two different surface energies (hydrophilic vs hydrophobic) varying in roughness from smooth to micro-rough to rough. Nanotribometric tests on single legs were also performed. The external morphology of the attachment devices investigated by scanning electron microscopy suggested higher intra-specific (intersexual) than inter-specific differences. Whereas differences between the two species in traction force were high on smooth surfaces, no differences could be detected between males and females within each species. With claws intact, both species showed the highest forces on rough surfaces, although N. nepalensis with clipped claws performed best on a smooth surface. However, N. nepalensis beetles outperformed N. vespilloides, which showed no differences between smooth and rough surfaces with clipped claws. Both species demonstrated poor traction forces on micro-rough surfaces. Results concerning the impact of surface polarity were inconclusive, whereas roughness more strongly affected the attachment performance in both species. Nanotribometric analyses of the fore tarsi performed on micro-rough and rough surfaces revealed higher friction in the proximal (pull) direction compared with the distal (push) direction. In these experiments, we detected neither differences in friction performance between the two species, nor clear trends concerning the influence of surface polarity. We conclude that the investigated morphological traits are not critical for the observed interspecific difference in attachment ability on smooth surfaces. Furthermore, interspecific differences in performance are only clear on smooth surfaces and vanish on micro-rough and rough surfaces. Our results suggest that even subtle differences in the adhesion-mediating secretion in closely related species might result in qualitative performance shifts.

Adhesion and running speed of a tropical arboreal ant (Cephalotes atratus) on wet substrates

In the tropical forest canopy, wingless worker ants must cling to and run along diverse vegetative surfaces with little protection from sun, wind and rain. Ants rely in part on their tiny adhesive tarsal pads to maintain sufficient contact with substrates to prevent falls under these varied conditions. Here, we examined the effects of substrate wettability and surface water on the tarsal pad adhesive performance of a common tropical arboreal ant. Ant adhesion was consistently higher on an intermediately wetting substrate (static water contact angle ca 90°) when resisting both perpendicular (normal) force and parallel (shear) force. Normal adhesion was maintained on intermediately wetting and hydrophobic substrates following the addition of rain-mimicking water droplets, whereas shear adhesion declined on all substrate types tested after wetting. Ant running speed was slower on wet substrates. On wood substrates, normal and shear adhesion declined with increasing wetness from dry, to misted, to water-soaked. These differences probably contributed to lower ant running speed on wet wood. The results of this study provide the first quantitative assessment of tropical arboreal ant adhesive performance under substrate conditions that are commonly encountered in the rainforest canopy.

Investigating the efficiency of a bio-inspired insect repellent surface structure

Most insects with smooth or hairy adhesive pads have very little problems in attaching to smooth substrates. A careful selection of surface roughness, however, can effectively limit the contact area of the adhesive organs with the surface. In comparison to conventional toxin-based insect repelling methods, biologically inspired micro- and nanostructured insect repellent surface structures, thus, offer a great potential to effective and environmentally-friendly control insect pests. We here present a simple experimental approach to qualitatively and quantitatively analyse the efficiency of a micro- and nanorough surface structure. Nauphoeta cinerea and Gastrophysa viridula as model organisms for insects with smooth and hairy adhesive pads, respectively, were placed in an enclosed environment. The escape movements of freely running insects over either the repellent or a control surfaces were counted and analyzed in detail. The tested surface structures were able to significantly reduce the escape of cockroaches with smooth adhesive pads by 44.1%. Interestingly, the data indicates that N. cinerea might use mechanical cues from the antenna to discriminate between surfaces before making contact with the adhesive pads. G. viridula with hairy adhesive pads were not significantly affected by the surface structure. By carefully adjusting 'critical' surface topography parameters relevant for insect adhesion, more efficient and selective repellent surfaces might be achieved. Such nanostructure-based insect repellent surfaces could also help to utilize recruitment behavior of certain insect species and might present a novel approach to effectively control insect pests.

Straightforward and precise approach to replicate complex hierarchical structures from plant surfaces onto soft matter polymer

The surfaces of plant leaves are rarely smooth and often possess a species-specific micro- and/or nano-structuring. These structures usually influence the surface functionality of the leaves such as wettability, optical properties, friction and adhesion in insect-plant interactions. This work presents a simple, convenient, inexpensive and precise two-step micro-replication technique to transfer surface microstructures of plant leaves onto highly transparent soft polymer material. Leaves of three different plants with variable size (0.5-100 µm), shape and complexity (hierarchical levels) of their surface microstructures were selected as model bio-templates. A thermoset epoxy resin was used at ambient conditions to produce negative moulds directly from fresh plant leaves. An alkaline chemical treatment was established to remove the entirety of the leaf material from the cured negative epoxy mould when necessary, i.e. for highly complex hierarchical structures. Obtained moulds were filled up afterwards with low viscosity silicone elastomer (PDMS) to obtain positive surface replicas. Comparative scanning electron microscopy investigations (original plant leaves and replicated polymeric surfaces) reveal the high precision and versatility of this replication technique. This technique has promising future application for the development of bioinspired functional surfaces. Additionally, the fabricated polymer replicas provide a model to systematically investigate the structural key points of surface functionalities.

Adhesion enhancement of cribellate capture threads by epicuticular waxes of the insect prey sheds new light on spider web evolution

To survive, web-building spiders rely on their capture threads to restrain prey. Many species use special adhesives for this task, and again the majority of those species cover their threads with viscoelastic glue droplets. Cribellate spiders, by contrast, use a wool of nanofibres as adhesive. Previous studies hypothesized that prey is restrained by van der Waals' forces and entrapment in the nanofibres. A large discrepancy when comparing the adhesive force on artificial surfaces versus prey implied that the real mechanism was still elusive. We observed that insect prey's epicuticular waxes infiltrate the wool of nanofibres, probably induced by capillary forces. The fibre-reinforced composite thus formed led to an adhesion between prey and thread eight times stronger than that between thread and wax-free surfaces. Thus, cribellate spiders employ the originally protective coating of their insect prey as a fatal component of their adhesive and the insect promotes its own capture. We suggest an evolutionary arms race with prey changing the properties of their cuticular waxes to escape the cribellate capture threads that eventually favoured spider threads with viscous glue.

Anti-adhesive effects of plant wax coverage on insect attachment

The long period of reciprocal antagonistic coevolution between some insect and plant species has led to the development of plant surface attributes that reduce insect attachment. These features serve as a defence against herbivores, sap-sucking insects and nectar robbers, contribute to a temporary capture of insect pollinators, and prevent the escape of insects from traps of carnivorous plants. This review summarises the literature on attachment-mediated insect-plant interactions. A short introduction to attachment systems of insects is presented and the effect of three-dimensional epicuticular waxes on insect attachment is illustrated by many examples. Special attention is given to the mechanisms of the anti-attachment properties of plant wax structures (the roughness hypothesis, the contamination hypothesis, the fluid-adsorption hypothesis, and the wax-dissolving hypothesis) and their ecological implications.