Effect of the π-conjugation length on the properties and photovoltaic performance of A-π-D-π-A type oligothiophenes with a 4,8-bis(thienyl)benzo[1,2-b:4,5-b']dithiophene core

DFT and TD-DFT Investigations for the Limitations of Lengthening the Polyene Bridge between N,N-dimethylanilino Donor and Dicyanovinyl Acceptor Molecules as a D-π-A Dye-Sensitized Solar Cell

One useful technique for increasing the efficiency of organic dye-sensitized solar cells (DSSCs) is to extend the π-conjugated bridges between the donor (D) and the acceptor (A) units. The present study used the DFT and TD-DFT techniques to investigate the effect of lengthening the polyene bridge between the donor N, N-dimethyl-anilino and the acceptor dicyanovinyl. The results of the calculated key properties were not all in line with expectations. Planar structure was associated with increasing the π-conjugation linker, implying efficient electron transfer from the donor to the acceptor. A smaller energy gap, greater oscillator strength values, and red-shifted electronic absorption were also observed when the number of polyene units was increased. However, some results indicated that the potential of the stated dyes to operate as effective dye-sensitized solar cells is limited when the polyene bridge is extended. Increasing the polyene units causes the HOMO level to rise until it exceeds the redox potential of the electrolyte, which delays regeneration and impedes the electron transport cycle from being completed. As the number of conjugated units increases, the terminal lobes of HOMO and LUMO continue to shrink, which affects the ease of intramolecular charge transfer within the dyes. Smaller polyene chain lengths yielded the most favorable results when evaluating the efficiency of electron injection and regeneration. This means that the charge transfer mechanism between the conduction band of the semiconductor and the electrolyte is not improved by extending the polyene bridge. The open circuit voltage (VOC) was reduced from 1.23 to 0.70 V. Similarly, the excited-state duration (τ) decreased from 1.71 to 1.23 ns as the number of polyene units increased from n = 1 to n = 10. These findings are incompatible with the power conversion efficiency requirements of DSSCs. Therefore, the elongation of the polyene bridge in such D-π-A configurations rules out its application in solar cell devices.

Theoretical investigations on electronic structure and optoelectronic properties of vinyl fused monomeric and oligomeric benzimidazole derivatives using DFT and TDDFT techniques

CONTEXT

The present work encompasses the theoretical investigation of 14 benzimidazole-based (seven vinyl fused monomeric benzimidazole (VFMBI) and seven vinyl fused oligomeric benzimidazole (VFOBI)) derivatives using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) techniques. The effects of electron donor and acceptor groups on the electronic structure such as HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energies, HOMO-LUMO energy gap, ionization potentials (IPs), electron affinities (EAs), internal reorganization energies of holes and electrons (λh/e), and excited state properties have been explored in the present work. In addition, natural bond orbital (NBO) analysis of these compounds has been investigated to reveal the typical stabilization interactions in these molecules. Hence, the aim of the present work is to explore the electronic structures and optoelectronic properties of the title molecules on the basis of the DFT quantum chemical calculations and to make an idea on the parameters influencing the optoelectronic efficiency toward a better understanding of the structure-property relationships. Moreover, the calculated results reveal the suitable optoelectronic properties of benzimidazole oligomer derivatives using theoretical techniques. Of the investigated molecules, 4_MABIMCY and 4_MABIOCY show potential optoelectronic properties and can be used as a potential charge transport material due to their narrow band gap, high hyperpolarizability, low ionization potential, and high electron affinity. The larger λab and λem values favor the system to be used as a potential optoelectronic material with better optical properties.

METHODS

All quantum chemical calculations were carried out using Gaussian09 theoretical chemistry code. Ground state calculations were made using the B3LYP/6-31+G(d,p) method. All excited state calculations had been computed using TDB3P86/6-311++(d,p). The initial structure for excited state calculations was optimized using the AM1 semi-empirical method.

Computational study of the photophysical properties and electronic structure of iridium(III) photosensitizer complexes with electron-withdrawing groups

A series of novel [Ir(tpy)(btp)Cl]+ complexes (Ir1-Ir4) have been reported to show excellent performance as photosensitizers. The introduction of electron-withdrawing groups increases visible light absorption and the lifetime of triplet states. To improve the photophysical properties, we theoretically design Ir5-Ir9 with electron-withdrawing groups (Cl, F, COOH, CN and NO2). Surprisingly, our findings indicate that the photosensitizer performance does not strictly increase with the electron-withdrawing ability of the substituents. In this work, the geometric and electronic structures, transition features, and photophysical properties of Ir1-Ir9 are investigated. The natural transition orbital (NTO) analysis indicates that the T1 and T2 states play a role in the photochemical pathways. Ultraviolet-visible (UV-vis) absorption spectra and charge-transfer spectra (CTS) have been investigated to show that the introduction of electron-withdrawing groups not only improves the visible light absorbing ability, but also changes the nature of electron excitation, providing a future molecular design strategy for similar series of photosensitizers. The rates of (reverse) intersystem crossing and the Huang-Rhys factors are evaluated to interpret the experimental results within the framework of Marcus theory. For complexes Ir1-Ir7, the introduction of electron-withdrawing groups leads to a lower efficiency of reverse intersystem crossing and a strong non-radiative process T2 → T1, resulting in a long triplet lifetime and excellent performance as a photosensitizer. Furthermore, some newly designed complexes (Ir7-Ir9) show great potential as thermally activated delayed fluorescence emitters, contrary to our initial expectations.

Trifluoromethyl-Substituted Conjugated Random Terpolymers Enable High-Performance Small and Large-Area Organic Solar Cells Using Halogen-Free Solvent

The advancement of non-fullerene acceptors with crescent-shaped geometry has led to the need for polymer donor improvements. Additionally, there is potential to enhance the photovoltaic parameters in high-efficiency organic solar cells (OSCs). The random copolymerization method is a straightforward and effective strategy to further optimize photoactive morphology and enhance device performance. However, finding a suitable third component in terpolymers remains a crucial challenge. In this study, a series of terpolymer donors (PTF3, PTF5, PTF10, PTF20, and PTF50) is synthesized by introducing varying amounts of the trifluoromethyl-substituted unit (CF3) into the PM6 polymer backbone. Even subtle changes in the CF3 content can significantly enhance all the photovoltaic parameters due to the optimized energy levels, molecular aggregation/miscibility, and bulk-heterojunction morphology of the photoactive materials. Thus, the best binary OSC based on the PTF5:Y6-BO achieves an outstanding power conversion efficiency (PCE) of 18.2% in the unit cell and a PCE of 11.6% in the sub-module device (aperture size: 54.45 cm2 ), when using halogen-free solvent o-xylene. This work showcases the remarkable potential of the easily accessible CF3 unit as a key constituent in the construction of terpolymer donors in high-performance OSCs.

MOLGENGO: Finding Novel Molecules with Desired Electronic Properties by Capitalizing on Their Global Optimization

The discovery of novel and favorable fluorophores is critical for understanding many chemical and biological studies. High-resolution biological imaging necessitates fluorophores with diverse colors and high quantum yields. The maximum oscillator strength and its corresponding absorption wavelength of a molecule are closely related to the quantum yields and the emission spectrum of fluorophores, respectively. Thus, the core step to design favorable fluorophore molecules is to optimize the desired electronic transition properties of molecules. Here, we present MOLGENGO, a new molecular property optimization algorithm, to discover novel and favorable fluorophores with machine learning and global optimization. This study reports novel molecules from MOLGENGO with high oscillator strength and absorption wavelength close to 200, 400, and 600 nm. The results of MOLGENGO simulations have the potential to be candidates for new fluorophore frameworks.

High performance p-type molecular electron donors for OPV applications via alkylthiophene catenation chromophore extension

The synthesis of key 4-alkyl-substituted 5-(trimethylsilyl)thiophene-2-boronic acid pinacol esters 3 allowed a simplified alkylthiophene catenation process to access bis-, ter-, quater-, and quinquethiophene π-bridges for the synthesis of acceptor–π-bridge-donor– π-bridge-acceptor (A–π-D–π-A) electron donor molecules. Based on the known benzodithiophene-terthiophene-rhodanine (BTR) material, the BXR series of materials, BMR (X = M, monothiophene), BBR (X = B, bithiophene), known BTR (X = T, terthiophene), BQR (X = Q, quaterthiophene), and BPR (X = P(penta), quinquethiophene) were synthesised to examine the influence of chromophore extension on the device performance and stability for OPV applications. The BT^xR (x = 4, butyl, and x = 8, octyl) series of materials were synthesised by varying the oligothiophene π-bridge alkyl substituent to examine structure–property relationships in OPV device performance. The devices assembled using electron donors with an extended chromophore (BQR and BPR) are shown to be more thermally stable than the BTR containing devices, with un-optimized efficiencies up to 9.0% PCE. BQR has been incorporated as a secondary donor in ternary blend devices with PTB7-Th resulting in high-performance OPV devices with up to 10.7% PCE.