Design of Experiment (DOE) Utilization to Develop a Simple and Robust Reversed-Phase HPLC Technique for Related Substances' Estimation of Omeprazole Formulations

Analytical quality by design-based development of a capillary electrophoresis method for Omeprazole impurity profiling

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer. A symmetric three-level screening matrix 37//16 was used to evaluate the effect of Critical Method Parameters, including Background Electrolyte composition and instrumental settings, on Critical Method Attributes (critical resolution values, OME peak width and analysis time). The analytical procedure was optimized using Response Surface Methodology through a Central Composite Orthogonal Design. Risk of failure maps made it possible to define the Method Operable Design Region, within which the following optimized conditions were selected: 72 mM borate buffer pH 10.0, 96 mM SDS, 1.45 %v/v n-butanol, capillary temperature 21 °C, applied voltage 25 kV. The method was validated according to ICH guidelines and robustness was evaluated using a Plackett-Burman design. The developed procedure enables the simultaneous determination of OME and seven related impurities, and has been successfully applied to the analysis of pharmaceutical formulations.

Drilling into "Quality by Design" Approach for Analytical Methods

The need for consistency in analytical method development reinforces the dependence of pharmaceutical product development and manufacturing on robust analytical data. The Analytical Quality by Design (AQbD), akin to the product Quality by Design (QbD) endows a high degree of confidence to the method quality developed. AQbD involves the definition of the analytical target profile as starting point, followed by the identification of critical method variables and critical analytical attributes, supported on risk assessment and design of experiment tools for the establishment of a method operable design region and control strategy of the method. This systematic approach moves away from reactive troubleshooting to proactive failure reduction. The objective of this review is to highlight the elements of the AQbD framework and provide an overview of their implementation status in various analytical methods used in the pharmaceutical field. These methodologies include but are not limited to, high-performance liquid chromatography, UV-Vis spectrophotometry, capillary electrophoresis, supercritical fluid chromatography, and high-performance thin-layer chromatography. Finally, a critical appraisal is provided to highlight how regulators have encouraged AQbD principles application to boost the prevention of method failures and a better understanding of the method operable design region (MODR) and control strategy, ultimately resulting in cost-effectiveness and regulatory flexibility.

Box-Behnken design aided optimization and validation of developed reverse phase HPLC analytical method for simultaneous quantification of dolutegravir sodium and lamivudine co-loaded in nano-liposomes

A stability-indicating reversed-phase high-performance liquid chromatography method for simultaneous estimation of dolutegravir sodium and lamivudine encapsulated in the nanoliposomal formulation was developed. The chromatographic parameters namely, organic phase ratio, flow rate, and sample injection volume were selected as independent factors and were optimized by multivariate Box-Behnken design. Responses analyzed were retention time, peak area, and resolution. The optimized chromatographic method with Hypersil BDS C8 CN column as stationary phase and methanol and acetonitrile mixture and acidified Milli-Q water (pH 2.8, adjusted with 0.02% v/v orthophosphoric acid) as the mobile phase in an isocratic elution mode was validated according to parameters of International Conference on Harmonization Q1(R2) guidelines. The validated reversed-phase high-performance liquid chromatography method exhibited specificity for both dolutegravir sodium and lamivudine in the presence of degradation products as well as the liposomal matrix. This method was effectively utilized to determine the amount of drug entrapped and drug loading efficiency of dolutegravir sodium and lamivudine in a nano-liposomal formulation.

Development and Validation of a Novel Stability-Indicating RP-HPLC Method for the Simultaneous Determination of Related Substances of Ketoprofen and Omeprazole in Combined Capsule Dosage Form

A novel, simple, sensitive, selective and reproducible stability-indicating high performance liquid chromatographic method was developed for the quantitative determination of degradation products and process-related impurities of ketoprofen (KET) and omeprazole (OMZ) in combined oral solid dosage form. Chromatographic separation was achieved on a Phenomenex Luna C18 (2) column (150 × 4.6 mm, 5 μm) under gradient elution by using a binary mixture of potassium dihydrogen phosphate buffer and acetonitrile at a flow rate of 0.8 mL/min. Chromatogram was monitored at 233 nm for KET impurities and at 305 nm for OMZ impurities using a dual wavelength UV detector. Resolution for KET and OMZ and 14 impurities was found to be >1.5 for any pair of components. Typical retention behaviors of impurities at various pH values were depicted graphically. To prove the stability-indicating power of the method, the drug product was subjected to hydrolytic, oxidative, photolytic, humidity and thermal stress conditions as per ICH. The developed method was validated according to the current ICH guidelines for specificity, limit of detection, limit of quantification, linearity, accuracy, precision, ruggedness and robustness.

Development of RP UPLC-TOF/MS, stability indicating method for omeprazole and its related substances by applying two level factorial design; and identification and synthesis of non-pharmacopoeial impurities

A new UPLC-TOF/MS compatible, reverse phase-stability indicating method was developed for determination of Omeprazole (OMP) and its related substances in pharmaceutical dosage forms by implementing Design of Experiment (DoE) i.e. two level full factorial Design (2(3)+3 center points=11 experiments) to understand the Critical Method Parameters (CMP) and its relation with Critical Method Attribute (CMA); to ensure robustness of the method. The separation of eleven specified impurities including conversion product of OMP related compound F (13) and G (14) i.e. Impurity-I (1), OMP related compound-I (11) and OMP 4-chloro analog (12) was achieved in a single method on Acquity BEH shield RP18 100 × 2.1 mm, 1.7 μm column, with inlet filter (0.2 μm) using gradient elution and detector wavelength at 305 nm and validated in accordance with ICH guidelines and found to be accurate, precise, reproducible, robust and specific. The drug was found to degrade extensively in heat, humidity and acidic conditions and forms unknown degradation products during stability studies. The same method was used for LC-MS analysis to identify m/z and fragmentation of maximum unknown impurities (Non-Pharmacopoeial) i.e. Impurity-I (1), Impurity-III (3), Impurity-V (5) and Impurity-VIII (9) formed during stability studies. Based on the results, degradation pathway for the drug has been proposed and synthesis of identified impurities i.e. impurities (Impurity-I (1), Impurity-III (3), Impurity-V (5) and Impurity-VIII (9)) are discussed in detail to ensure in-depth understanding of OMP and its related impurities and optimum performance during lifetime of the product.

Development of a Stability-Indicating Stereoselective Method for Quantification of the Enantiomer in the Drug Substance and Pharmaceutical Dosage Form of Rosuvastatin Calcium by an Enhanced Approach

A novel, simple, precise, and stability-indicating stereoselective method was developed and validated for the accurate quantification of the enantiomer in the drug substance and pharmaceutical dosage forms of Rosuvastatin Calcium. The method is capable of quantifying the enantiomer in the presence of other related substances. The chromatographic separation was achieved with an immobilized cellulose stationary phase (Chiralpak IB) 250 mm x 4.6 mm x 5.0 μm particle size column with a mobile phase containing a mixture of n-hexane, dichloromethane, 2-propanol, and trifluoroacetic acid in the ratio 82:10:8:0.2 (v/v/v/v). The eluted compounds were monitored at 243 nm and the run time was 18 min. Multivariate analysis and statistical tools were used to develop this highly robust method in a short span of time. The stability-indicating power of the method was established by subjecting Rosuvastatin Calcium to the stress conditions (forced degradation) of acid, base, oxidative, thermal, humidity, and photolytic degradation. Major degradation products were identified and found to be well-resolved from the enantiomer peak, proving the stability-indicating power of the method. The developed method was validated as per International Conference on Harmonization (ICH) guidelines with respect to specificity, limit of detection and limit of quantification, precision, linearity, accuracy, and robustness. The method exhibited consistent, high-quality recoveries (100 ± 10%) with a high precision for the enantiomer. Linear regression analysis revealed an excellent correlation between the peak responses and concentrations (r(2) value of 0.9977) for the enantiomer. The method is sensitive enough to quantify the enantiomer above 0.04% and detect the enantiomer above 0.015% in Rosuvastatin Calcium. The stability tests were also performed on the drug substances as per ICH norms.