Development and validation of an analytical method for determination of citrinin in red rice and red yeast rice-based food supplements by ultra-high performance liquid chromatography tandem mass spectrometry

Citrinin is a hepato-nephrotoxic mycotoxin produced by fungal species. The Monascus purpureus fungus plays a crucial role in the fermentation of red rice to produce red yeast rice-based food supplements, which represent the primary source of human exposure to citrinin. In this study, a simple and sensitive analytical method was successfully developed and validated for the citrinin determination in these products. The extraction process involved a QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) step and citrinin determination by ultra high-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS). The proposed method provided satisfactory linearity, percentage of recovery from 82 to 104% with relative standard deviations (RSD) lower than 14%, and limits of detection and quantification of 0.07 μg/Kg and 0.24 μg/kg, respectively. Among the 14 samples analyzed, citrinin was found in two red rice samples (0.24 and 0.46 μg/kg) and in six food supplements (from 0.44 to 87 μg/kg).

Eco-friendly one-step egg white gel preparation for sensitive detection of 13 trichothecenes in oats using UHPLC-MS/MS

Oat products have gained widespread recognition as a health food due to their rich and balanced nutritional profile and convenience. However, the unique matrix composition of oats, which differs significantly from other cereals, presents specific challenges for mycotoxin analysis. This study presents an ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method enhanced with an innovative egg white gel pretreatment for the simultaneous analysis of 13 regulated and unregulated trichothecenes in oats. The method demonstrated excellent performance with high accuracy (> 87.5%), repeatability (< 5.7%), and reproducibility (< 8.1%). Analysis of 100 commercial oat products revealed a concerning detection rate (78%) for at least one of the 11 trichothecenes investigated. Notably, deoxynivalenol, exceeding the standard limit in 2% of samples, exhibited the highest detection rate (62%). Additionally, concerning co-occurrence patterns and positive correlations were observed, highlighting potential synergistic effects. The first-time detection of unregulated mycotoxins (T-2 triol, 4,15-diacetoxyscirpenol, 15-acetoxyscirpenol, and neosolaniol) underscores the need for comprehensive monitoring. This method, while developed for oats, shows potential for broader application to other cereals, though further investigation and confirmation are necessary. These findings suggest a potentially underestimated risk of trichothecenes in oats, necessitating continuous monitoring to ensure consumer safety.

What Is Fusarium Head Blight (FHB) Resistance and What Are Its Food Safety Risks in Wheat? Problems and Solutions-A Review

The term "Fusarium Head Blight" (FHB) resistance supposedly covers common resistances to different Fusarium spp. without any generally accepted evidence. For food safety, all should be considered with their toxins, except for deoxynivalenol (DON). Disease index (DI), scabby kernels (FDK), and DON steadily result from FHB, and even the genetic regulation of Fusarium spp. may differ; therefore, multitoxin contamination is common. The resistance types of FHB form a rather complex syndrome that has been the subject of debate for decades. It seems that resistance types are not independent variables but rather a series of components that follow disease and epidemic development; their genetic regulation may differ. Spraying inoculation (Type 1 resistance) includes the phase where spores land on palea and lemma and spread to the ovarium and also includes the spread-inhibiting resistance factor; therefore, it provides the overall resistance that is needed. A significant part of Type 1-resistant QTLs could, therefore, be Type 2, requiring the retesting of the QTLs; this is, at least, the case for the most effective ones. The updated resistance components are as follows: Component 1 is overall resistance, as discussed above; Component 2 includes spreading from the ovarium through the head, which is a part of Component 1; Component 3 includes factors from grain development to ripening (FDK); Component 4 includes factors influencing DON contamination, decrease, overproduction, and relative toxin resistance; and for Component 5, the tolerance has a low significance without new results. Independent QTLs with different functions can be identified for one or more traits. Resistance to different Fusarium spp. seems to be connected; it is species non-specific, but further research is necessary. Their toxin relations are unknown. DI, FDK, and DON should be checked as they serve as the basic data for the risk analysis of cultivars. A better understanding of the multitoxin risk is needed regarding resistance to the main Fusarium spp.; therefore, an updated testing methodology is suggested. This will provide more precise data for research, genetics, and variety registration. In winter and spring wheat, the existing resistance level is very high, close to Sumai 3, and provides much greater food safety combined with sophisticated fungicide preventive control and other practices in commercial production.

Comprehensive review on patulin and Alternaria toxins in fruit and derived products

Mycotoxins are toxic secondary metabolites produced by certain fungi, which can contaminate various food commodities, including fruits and their derived products. Patulin and Alternaria toxins are among the most commonly encountered mycotoxins in fruit and their derived products. In this review, the sources, toxicity, and regulations related to these mycotoxins, as well as their detection and mitigation strategies are widely discussed. Patulin is a mycotoxin produced mainly by the fungal genera Penicillium, Aspergillus, and Byssochlamys. Alternaria toxins, produced by fungi in the Alternaria genus, are another common group of mycotoxins found in fruits and fruit products. The most prevalent Alternaria toxins are alternariol (AOH) and alternariol monomethyl ether (AME). These mycotoxins are of concern due to their potential negative effects on human health. Ingesting fruits contaminated with these mycotoxins can cause acute and chronic health problems. Detection of patulin and Alternaria toxins in fruit and their derived products can be challenging due to their low concentrations and the complexity of the food matrices. Common analytical methods, good agricultural practices, and contamination monitoring of these mycotoxins are important for safe consumption of fruits and derived products. And Future research will continue to explore new methods for detecting and managing these mycotoxins, with the ultimate goal of ensuring the safety and quality of fruits and derived product supply.

Using Solid-Phase Microextraction Coupled with Reactive Carbon Fiber Ionization-Mass Spectrometry for the Detection of Aflatoxin B1 from Complex Samples

Aflatoxin B1 (AFB1) is a common mycotoxin present in agricultural and food products. Therefore, rapid screening methods must be developed for AFB1 detection with high sensitivity and good selectivity. In this study, we developed an analytical method based on the combination of solid-phase microextraction (SPME) with carbon fiber ionization (CFI)-mass spectrometry (MS) to detect the presence of trace AFB1 from complex samples. A pencil lead (type 2B, length: ~2.5 cm) with a sharp end (diameter: ~150 μm) was used as the SPME fiber and the ionization emitter in CFI-MS analysis. Owing to the graphite structure of the pencil lead, AFB1 can be trapped on the pencil lead through π–π interactions. After adsorbing AFB1, the pencil lead was directly introduced in a pipette tip (length: ~0.7 cm; tip inner diameter: ~0.6 mm), placed close (~1 mm) to the inlet of the mass spectrometer, and applied with a high voltage (−4.5 kV) for in situ AFB1 elution and CFI-MS analysis. A direct electric contact on the SPME-CFI setup was not required. Followed by the introduction of an elution solvent (10 μL) (acetonitrile/ethanol/deionized water, 2:2:1 (v/v/v)) to the pipette tip, electrospray ionization was generated from the elution solvent containing AFB1 for CFI-MS analysis. A reactive SPME-CFI-MS strategy was employed to further identify AFB1 and improve elution capacity using our approach. Butylamine was added to the elution solvent, which was then introduced to the pipette tip inserted with the SPME fiber. Butylamine-derivatized AFB1 was readily generated and appeared in the resultant SPME-CFI mass spectrum. The lowest detectable concentration against AFB1 using our approach was ~1.25 nM. Our method can distinguish AFB1 from AFG1 in a mixture and can be used for the detection of trace AFB1 in complex peanut extract samples.

Validation of a New Sensitive Method for the Detection and Quantification of R and S-Epimers of Ergot Alkaloids in Canadian Spring Wheat Utilizing Deuterated Lysergic Acid Diethylamide as an Internal Standard

Ergot sclerotia effect cereal crops intended for consumption. Ergot alkaloids within ergot sclerotia are assessed to ensure contamination is below safety standards established for human and animal health. Ergot alkaloids exist in two configurations, the R and S-epimers. It is important to quantify both configurations. The objective of this study was to validate a new ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method for quantification of six R and six S-epimers of ergot alkaloids in hard red spring wheat utilizing deuterated lysergic acid diethylamide (LSD-D3) as an internal standard. Validation parameters such as linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effects, recovery and precision were investigated. For the 12 epimers analyzed, low LOD and LOQ values were observed, allowing for the sensitive detection of ergot epimers. Matrix effects ranged between 101-113% in a representative wheat matrix. Recovery was 68.3-119.1% with an inter-day precision of <24% relative standard deviation (RSD). The validation parameters conform with previous studies and exhibit differences between the R and S-epimers which has been rarely documented. This new sensitive method allows for the use of a new internal standard and can be incorporated and applied to research or diagnostic laboratories.

Evaluation of Automated Sample Preparation for Mycotoxin Analysis in Foods

BACKGROUND

In the present study, we developed a novel automated sample preparation workflow for the determination of mycotoxins in foods.

OBJECTIVE

This workflow integrates off-line devices such as a centrifuge, shaker, liquid and solid dispensing units into a unified platform to perform gravimetric and volumetric dispensing, capping/decapping, extraction, shaking, filtration, and centrifugation. Two robotic arms provide sample transportation without human assistance.

METHOD

Critical method performance attributes were characterized using spiked corn, milk and peanut butter containing aflatoxins, deoxynivalenol, fumonisins, ochratoxin A, HT-2 and T-2 toxins and zearalenone and certified reference materials. Prepared samples were analyzed by liquid chromatography mass spectrometry (LC-MS).

RESULTS

Recoveries of spiked samples range 100-120% with RSD<20% and the majority of measured values of certified reference materials are consistent with certified values within ±20%. Within- and between-batch variabilities of QC samples range 5-9% and 7-12% respectively.

CONCLUSIONS

Our workflow introduces a straightforward and automated sample preparation procedure for LC-MS-based multimycotoxin analysis. Further, it demonstrates how individual sample preparation devices, that are conventionally used off-line, can be integrated together.

HIGHLIGHTS

This study shows automated sample preparation will replace manual operations and significantly increase the degree of automation and standardization for sample preparation.

Application of Novel Non-Thermal Physical Technologies to Degrade Mycotoxins

Mycotoxins cause adverse effects on human health. Therefore, it is of the utmost importance to confront them, particularly in agriculture and food systems. Non-thermal plasma, electron beam radiation, and pulsed light are possible novel non-thermal technologies offering promising results in degrading mycotoxins with potential for practical applications. In this paper, the available publications are reviewed-some of them report efficiency of more than 90%, sometimes almost 100%. The mechanisms of action, advantages, efficacy, limitations, and undesirable effects are reviewed and discussed. The first foretastes of plasma and electron beam application in the industry are in the developing stages, while pulsed light has not been employed in large-scale application yet.

Evaluation of Mass Sensitive Micro-Array biosensors for their feasibility in multiplex detection of low molecular weight toxins using mycotoxins as model compounds

Mycotoxins produced by Fusarium species including trichothecenes, zearalenone and fumonisins, can co-contaminate food and feed throughout the supply chain, including cereal grains and animal feeds. There is an increasing demand to enhance global food security by improving the monitoring of mycotoxins throughout our food supply chain. For time and cost-efficient analysis, rapid tests capable of detecting multiple toxins from a single sample are ideal. Considering these current trends in mycotoxin testing, this project examined the feasibility of using both a portable and non-portable mass-based biosensor for multiplex mycotoxin detection. The biosensor was a mass sensitive microarray (MSMA) which consisted of 4 × 16 miniaturized mass sensitive transducer pixels based on solidly mounted resonator (SMR) technology. Functionalisation of individual pixels on the sensor surface using nano-spotting technology for the simultaneous and semi-quantitative detection of three regulated mycotoxins: T2-toxin (T2) zearalenone (ZEN), and fumonisin B1 (FumB1) was examined. With the integration of portable and non-portable microfluidic devices for antibody and standard sample injections, competitive inhibition assays were developed followed by singleplex and multiplex calibration curves. The characteristics and performance of the MSMA were evaluated including sensitivity which was determined as the concentration causing 50% inhibition. Sensitivity of singleplex assays using the portable microfluidic device (PMD) were 1.3 ng/ml, 2.0 ng/ml and 6.8 ng/ml for T2, FumB1 and ZEN, respectively. Sensitivity of the multiplex assay again using the PMD was 6.1 ng/ml, 3.6 ng/ml and 2.4 ng/ml for T2, FumB1 and ZEN, respectively. The PMD was an easy to use and highly sensitive screening tool which has been demonstrated for the multiplex detection of three regulated mycotoxins. Analysis was in real time and results were fully digital. Since detection of analytes was by mass it was both a label-free and cost-efficient method proposed method of analysis for mycotoxins.

Detection of Aflatoxins in Different Matrices and Food-Chain Positions

Aflatoxins, produced mainly by filamentous fungi Aspergillus flavus and Aspergillus parasiticus, are one of the most carcinogenic compounds that have adverse health effects on both humans and animals consuming contaminated food and feed, respectively. Aflatoxin B1 (AFB1) and aflatoxin B2 (AFB2) as well as aflatoxin G1(AFG1) and aflatoxin G2 (AFG2) occur in the contaminated foods and feed. In the case of dairy ruminants, after the consumption of feed contaminated with aflatoxins, aflatoxin metabolites [aflatoxin M1 (AFM1) and aflatoxin M2 (AFM2)] may appear in milk. Because of the health risk and the official maximum limits of aflatoxins, there is a need for application of fast and accurate testing methods. At present, there are several analytical methods applied in practice for determination of aflatoxins. The aim of this review is to provide a guide that summarizes worldwide aflatoxin regulations and analytical methods for determination of aflatoxins in different food and feed matrices, that helps in the decision to choose the most appropriate method that meets the practical requirements of fast and sensitive control of their contamination. Analytical options are outlined from the simplest and fastest methods with the smallest instrument requirements, through separation methods, to the latest hyphenated techniques.

Determination of 42 mycotoxins in oats using a mechanically assisted QuEChERS sample preparation and UHPLC-MS/MS detection

A method was developed and validated for the simultaneous determination of 42 mycotoxins in oats. The method includes all the mycotoxins listed under Commission Regulation 1881/2006 and Commission Recommendation 165/2013, the emerging mycotoxins (beauvericin, alternariol, alternariol-methyl-ether and enniatins), and two masked metabolites, namely deoxynivalenol-3-glucoside and T-2-glucoside. The method also focuses on a wide range of analytes of toxicological interest. The sample preparation involved extraction with an aqueous acetic acid solution and acetonitrile, followed by QuEChERS with mechanically assisted vibrational shaking. No further clean-up steps were employed, and analysis was performed using ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). Trueness ranged between 78% and 158%, while precision ranged from 1.7% to 49.9% under within-laboratory reproducibility conditions. Beside the high degree of accuracy and sample throughput provided, the method can be applied to a large number of compounds currently not regulated, thus generating knowledge and for risk assessment purposes.

Recent advances in the application of metabolomics for food safety control and food quality analyses

As one of the omics fields, metabolomics has unique advantages in facilitating the understanding of physiological and pathological activities in biology, physiology, pathology, and food science. In this review, based on developments in analytical chemistry tools, cheminformatics, and bioinformatics methods, we highlight the current applications of metabolomics in food safety, food authenticity and quality, and food traceability. Additionally, the combined use of metabolomics with other omics techniques for "foodomics" is comprehensively described. Finally, the latest developments and advances, practical challenges and limitations, and requirements related to the application of metabolomics are critically discussed, providing new insight into the application of metabolomics in food analysis.

Fusarium head blight in wheat: contemporary status and molecular approaches

Fusarium head blight (FHB) disease that occurs in wheat is caused by Fusarium graminearum and is a major risk to wheat yield. Although several research efforts focusing on FHB have been conducted in the past several decades, conditions have become more critical due to the increase in its virulent forms. In such a scenario, conferring complete resistance in plants seems to be difficult for handling this issue. The phenotyping for FHB and finding a solution for it at the genetic level comprises a long-term process as FHB infection is largely affected by environmental conditions. Modern molecular strategies have played a crucial role in revealing the host-pathogen interaction in FHB. The integration of molecular biology-based methods such as genome-wide association studies and marker-based genomic selection has provided potential cultivars for breeding programs. In this review, we aim at outlining the contemporary status of the studies conducted on FHB in wheat. The influence of FHB in wheat on animals and human health is also discussed. In addition, a summary of the advancement in the molecular technologies for identifying and developing the FHB-resistant wheat genetic resources is provided. It also suggests the future measures that are required to reduce the world's vulnerability to FHB which was one of the main goals of the US Wheat and Barley Scab Initiative.

Trichothecenes in Cereal Grains - An Update

Trichothecenes are sesquiterpenoid mycotoxins produced by fungi from the order Hypocreales, including members of the Fusarium genus that infect cereal grain crops. Different trichothecene-producing Fusarium species and strains have different trichothecene chemotypes belonging to the Type A and B class. These fungi cause a disease of small grain cereals, called Fusarium head blight, and their toxins contaminate host tissues. As potent inhibitors of eukaryotic protein synthesis, trichothecenes pose a health risk to human and animal consumers of infected cereal grains. In 2009, Foroud and Eudes published a review of trichothecenes in cereal grains for human consumption. As an update to this review, the work herein provides a comprehensive and multi-disciplinary review of the Fusarium trichothecenes covering topics in chemistry and biochemistry, pathogen biology, trichothecene toxicity, molecular mechanisms of resistance or detoxification, genetics of resistance and breeding strategies to reduce their contamination of wheat and barley.

Retrospective and Prospective Look at Aflatoxin Research and Development from a Practical Standpoint

Among the array of structurally and toxicologically diverse mycotoxins, aflatoxins have attracted the most interest of scientific research due to their high toxicity and incidence in foods and feeds. Despite the undeniable progress made in various aspects related to aflatoxins, the ultimate goal consisting of reducing the associated public health risks worldwide is far from being reached due to multiplicity of social, political, economic, geographic, climatic, and development factors. However, a reasonable degree of health protection is attained in industrialized countries owing to their scientific, administrative, and financial capacities allowing them to use high-tech agricultural management systems. Less fortunate situations exist in equatorial and sub-equatorial developing countries mainly practicing traditional agriculture managed by smallholders for subsistence, and where the climate is suitable for mould growth and aflatoxin production. This situation worsens due to climatic change producing conditions increasingly suitable for aflatoxigenic mould growth and toxin production. Accordingly, it is difficult to harmonize the regulatory standards of aflatoxins worldwide, which prevents agri-foods of developing countries from accessing the markets of industrialized countries. To tackle the multi-faceted aflatoxin problem, actions should be taken collectively by the international community involving scientific research, technological and social development, environment protection, awareness promotion, etc. International cooperation should foster technology transfer and exchange of pertinent technical information. This review presents the main historical discoveries leading to our present knowledge on aflatoxins and the challenges that should be addressed presently and in the future at various levels to ensure higher health protection for everybody. In short, it aims to elucidate where we come from and where we should go in terms of aflatoxin research/development.

Maize meal slurry mixing: an economical recipe for precise aflatoxin quantitation

The laboratory sample preparation for mycotoxin determination in cereals, often overlooked among sampling plans and analytical methods, was further studied. The precision of aflatoxin analysis in comminuted maize samples using 25 g slurry (prepared from 250 g test portion of comminuted maize, water/matrix (1+1, v/w)) and 12.5 g dry grind test portion were compared against the conventional 50 g dry grind test portion through replicated (10) Aflatest® immunoaffinity fluorometric tests of naturally contaminated samples with aflatoxin concentration ranging from 4.9 to 81.7 μg/kg. The overall mean aflatoxin concentration obtained from the 10 different samples tested using 12.5 g and 50.0 g dry grind procedures was 12% significantly (P<0.05) lower (poorer) compared to 25 g slurry. The sample preparation plus analytical variance associated with testing 25.0 g slurry, 50.0 g dry grind and 12.5 g dry grind test portions were in the ratio of 1:5:15, respectively.

A multi-endpoint approach to the combined toxic effects of patulin and ochratoxin a in human intestinal cells

Humans can be exposed to a complex and variable combination of mycotoxins. After ingestion, intestinal mucosa constitutes the first biological barrier that can be exposed to high concentrations of these toxins. The present study aimed to characterize the combined cytotoxicity, genotoxicity and impact on the gastrointestinal barrier integrity of patulin (PAT, 0.7 μM to 100 μM) and ochratoxin A (OTA, 1 μM to 200 μM) mixtures in Caco-2 cells. A dose-ratio deviation was verified for cytotoxicity, implying that OTA was mainly responsible for synergism when dominant in the mixture, while this pattern was changed to antagonism for the highest PAT concentrations. Genotoxicity (comet assay) results were compatible with an interactive DNA damaging effect at the highest PAT and OTA concentrations, not clearly mediated by the formation of oxidative DNA breaks. Regarding gastrointestinal barrier integrity, a potential synergism was attained at low levels of both mycotoxins, changing to antagonism at higher doses. The present results indicate that combined mycotoxins effects may arise at the intestinal level and should not be underestimated when evaluating their risk to human health.

Development and Validation of a Liquid Chromatography High-Resolution Mass Spectrometry Method for the Simultaneous Determination of Mycotoxins and Phytoestrogens in Plant-Based Fish Feed and Exposed Fish

New protein sources in fish feed require the assessment of the carry-over potential of contaminants and anti-nutrients from feed ingredients into the fish, and the assessment of possible health risks for consumers. Presently, plant materials including wheat and legumes make up the largest part of aquafeeds, so evaluation of the transfer capabilities of typical toxic metabolites from plant-infesting fungi and of vegetable phytoestrogens into fish products is of great importance. With the aim of facilitating surveillance of relevant mycotoxins and isoflavones, we have developed and validated a multi-analyte LC-HRMS/MS method that can be used to ensure compliance to set maximum levels in feed and fish. The method performance characteristics were determined, showing high specificity for all 25 targeted analytes, which included 19 mycotoxins and three isoflavones and their corresponding aglycons with sufficient to excellent sensitivities and uniform analytical linearity in different matrices. Depending on the availability of matching stable isotope-labelled derivates or similar-structure homologues, calibration curves were generated either by using internal standards or by matrix-matched external standards. Precision and recovery data were in the accepted range, although they varied between the different analytes. This new method was considered as fit-for-purpose and applied for the analysis of customised fish feed containing wheat gluten, soy, or pea protein concentrate as well as salmon and zebrafish fed on diets with these ingredients for a period of up to eight weeks. Only mycotoxin enniatin B, at a level near the limit of detection, and low levels of isoflavones were detected in the feed, demonstrating the effectiveness of maximum level recommendations and modern feed processing technologies in the Norwegian aquaculture industry. Consequently, carry-over into fish muscle was not observed, confirming that fillets from plant-fed salmon were safe for human consumption.

Current trends in rapid tests for mycotoxins

There are an ample number of commercial testing kits available for mycotoxin analysis on the market today, including enzyme-linked immunosorbent assays, membrane-based immunoassays, fluorescence polarisation immunoassays and fluorometric assays. It can be observed from the literature that not only are developments and improvements ongoing for these assays but there are also novel assays being developed using biosensor technology. This review focuses on both the currently available methods and recent innovative methods for mycotoxin testing. Furthermore, it highlights trends that are influencing assay developments such as multiplexing capabilities and rapid on-site analysis, indicating the possible detection methods that will shape the future market.

Cost-Effective Sampling and Analysis for Mycotoxins in a Cereal Batch

The presence of hazards (e.g., contaminants, pathogens) in food/feed, water, plants, or animals can lead to major economic losses related to human and animal health or the rejection of batches of food or feed. Monitoring these hazards is important but can lead to high costs. This study aimed to find the most cost-effective sampling and analysis (S&A) plan in the cases of the mycotoxins deoxynivalenol (DON) in a wheat batch and aflatoxins (AFB₁ ) in a maize batch. An optimization model was constructed, maximizing the number of correct decisions for accepting/rejecting a batch of cereals, with a budget as major constraint. The decision variables were the choice of the analytical method: instrumental method (e.g., liquid chromatography combined with mass-spectrometry (LC-MS/MS)), enzyme-linked-immuno-assay (ELISA), or lateral flow devices (LFD), the number of incremental samples collected from the batch, and the number of aliquots analyzed. S&A plans using ELISA showed to be slightly more cost effective than S&A plans using the other two analytical methods. However, for DON in wheat, the difference between the optimal S&A plans using the three different analytical methods was minimal. For AFB₁ in maize, the cost effectiveness of the S&A plan using instrumental methods or ELISA were comparable whereas the S&A plan considering onsite detection with LFDs was least cost effective. In case of nonofficial controls, which do not have to follow official regulations for sampling and analysis, onsite detection with ELISA for both AFB₁ in maize and DON in wheat, or with LFDs for DON in wheat, could provide cost-effective alternatives.

Development and Comparison of Two Multiresidue Methods for the Determination of 17 Aspergillus and Fusarium Mycotoxins in Cereals Using HPLC-ESI-TQ-MS/MS

Cereals can be contaminated by several mycotoxins, whose co-presence may represent an undervalued risk for humans and animals. Maize and wheat are the most contaminated cereals and in temperate areas could be affected in field conditions by several Fusarium and Aspergillus infections. To date, only B-fumonisins (FBs), aflatoxins (AFs), zearalenone (ZEA), deoxynivalenol (DON) and T-2 and HT-2 toxins have been regulated in cereals in European Union. The other fungal metabolites, are commonly referred to as "emerging" and "masked" mycotoxins, and more information on their occurrence in combination with the regulated mycotoxins, are needed to design combined toxicological and exposure assessments. This research intends to develop and compare two multiresidue HPLC-ESI-TQ-MS/MS methods for the simultaneous determination of the main regulated, emerging and masked mycotoxins in maize and wheat, among which: FB1, FB2, DON, ZEA, AFB1, AFB2, AFG1, AFG2, moniliformin (MON), deoxynivalenol-3-glucoside (DON-3-G), 3-acetyldeoxynivalenol (3-ADON), 15-acetyldeoxynivalenol (15-ADON), nivalenol (NIV), enniatins A, A1, B, B1 (ENNA, ENNA1, ENNB, ENNB1). The extraction was performed for both methods using a mixture of CH3CN/H2O/CH3COOH (79/20/1, v/v/v), while the dilution/purification was carried out through two different procedures: (1) by the "dilute-and-shoot" technique diluting 1:2 the filtered extract with CH3CN/H2O/CH3COOH (20/79/1, v/v/v) to reduce the matrix effect; (2) using the Oasis® PRiME HLB clean-up columns. The analysis was carried out using CH3OH and H2O both acidified with 0.1% of CH3COOH as eluents. The injection volume was 20 μL and the flow rate 200 μL min-1. The analysis of two reference material (maize and wheat), was performed to evaluate the trueness and precision of the two methods by matrix-matched calibration curves. For all the regulated mycotoxins analyzed by both methods, the range of recovery percentage established by the Regulation (EC) No. 401/2006 was respected, except for ZEA by using the Oasis® PRiME HLB clean-up columns. Nevertheless, the results suggest that the Oasis® PRiME HLB clean-up columns, could be a valid alternative to the dilute-and-shoot method, although an additional cost for the clean-up has to be considered. In conclusion, both two analytical methods considerably reduce the analytical time and costs and therefore result to be promising and applicable for high-throughput routine multi-mycotoxins analysis by the use of a TQ.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.

Evaluation of Mycotoxin Screening Tests in a Verification Study Involving First Time Users

(AFB₁) in maize and wheat using LFD and LC-HRMS, respectively. The results of analyses were used to calculate intermediate precision (RSDip, covering the inter-analyst variability in preparing the analytical samples and the precision under repeatability conditions) cut-off values and false suspect rates. RSDip ranged from 6.5% to 30% for DON, and from 16% to 33% for AFB₁. The highest obtained variances were associated with the AFB₁ analyses due to working with much lower mass fractions. The rate of false suspect results were lower than 0.1% for all tested methods. All methods showed a fit-for-purpose method performance profile, which allowed a clear distinction of samples containing the analytes at the screening target concentration (STC) from negative control samples. Moreover, the first time users obtained method performances similar to those obtained for validation studies previously performed on the screening methods included in the training course.

Comprehensive study on the degradation of ochratoxin A in water by spectroscopic techniques and DFT calculations

The OTA degradation process becomes irreversible only if, following hydrolyzation of the lactone ring, the molecule fragments.

Development of antibodies for N-(1-deoxy-D-fructos-1-yl) fumonisin B1 and cross-reaction with modified fumonisins

Fumonisins are a group of mycotoxins that are routinely found worldwide in commodities such as maize. The group, which has many members, is generally characterised by the presence of one or more tricarballylic acid groups esterified to a long carbon backbone. The diversity of this group of toxins is further augmented by their ability to interact with matrix components non-covalently and to form covalent products with matrix constituents, such as carbohydrates and proteins. Covalent modifications to the toxins make it more difficult to assess the total amounts that may be present in a commodity. We developed monoclonal antibodies (Mabs) against a known product of the reaction of fumonisin B1 (FB1) with glucose: N-(1-deoxy-D-fructos-1-yl) fumonisin B1 (NDFrc-FB1). Similar reactions were used to produce fructosyl-analogs of fumonisins B2 and B3, as well as galactose, maltose, and rhamnose analogs of FB1. These analogs were tested in a competitive indirect ELISA for cross-reactivity towards one of the developed antibodies (Mab 213221). All of the carbohydrate analogs cross-reacted with the Mab, at levels ranging from 75% (the FB3 analog derived from D-glucose) to 181% (the FB1 analog derived from maltose). These results suggested the assay was capable of binding to a wide variety of fumonisin-carbohydrate derivatives. The same antibody was incorporated into an immunoaffinity column that was used to isolate modified fumonisins from a sample of naturally contaminated maize. These results demonstrate the potential to isolate and detect modified fumonisins and will facilitate efforts to determine the frequency of the occurrence of these compounds in maize.

Ultrasensitive and green electrochemical immunosensor for mycotoxin ochratoxin A based on phage displayed mimotope peptide

Here, we demonstrated a new approach for development of an ultrasensitive and green electrochemical immunosensor for Ochratoxin A (OTA). Phage displayed mimotope peptide of OTA was used as mimics of conventional competing antigen, which is chemical synthesized with toxic mycotoxins OTA as raw material, in a competitive sensing platform. The working electrode was modified by polyethylene glycol (PEG) for the purpose of immobilizing antibody effectively. Under the optimized test condition, the limit of detection (LOD) of the established immunosensor was 2.04 fg/mL, and the linear range was 7.17-548.76 fg/mL. Specific measurement of this established method was conducted by testing cross-reactivity of other common mycotoxins, the result showed that mimotope peptide-based immunosensor has negligible cross-reactivity with other mycotoxins. Furthermore, the novel concept of phage displayed mimotope peptide-based immunosensor may provide a potential application in general method for the ultrasensitive detection of various toxic small molecules in food.

Development and validation of an LC-MS/MS method for the simultaneous determination of citrinin and ochratoxin a in a variety of feed and foodstuffs

An ultra-performance liquid chromatography-electrospray tandem mass spectrometry (UPLC-ESI^+/--MS/MS) method for the simultaneous analysis of citrinin (CIT) and ochratoxin A (OTA) in feed (chicken and pig) and food (cereal-based products, fruit, vegetable juices, nuts, seeds, herbs, spices, vegetarian and soy products, alcoholic beverages, baby food products and food supplements) was developed. The mycotoxins were extracted from these matrices using a QuEChERS-based extraction method without any further clean-up step. The samples were 5-fold concentrated. Final extracts were analyzed using a UPLC-MS/MS system and chromatographic separation was achieved by applying a gradient elution for a total run time of 10 min. Mycotoxins were quantified using an internal calibration via analyte/¹³C-labeled internal standard ratio. The developed method was validated according to the criteria described in Commission Regulation No. 401/2006/EC and Commission Decision No. 2002/657/EC. Specificity, linearity, apparent recovery, limit of detection and quantification, intraday and interday precision, measurement uncertainty, matrix effect, and extraction efficiency were the parameters studied. Finally, 90 Belgian chicken and pig feed samples were analyzed, revealing the simultaneous presence of CIT (<LOQ - 3.90 μg/kg) and OTA (<LOQ - 5.60 μg/kg) in more than 50% of these products.

Yesterday masked, today modified; what do mycotoxins bring next?

Mycotoxins are secondary metabolites produced by toxigenic fungi in crops worldwide. In (micro)organisms such as plants, fungi, bacteria, or animals they may be further metabolised and modified, but this is also true for food processing, which may lead to a wide range of masked mycotoxin forms. These often remain undetected by analytical methods and are the culprits for underestimates in risk assessments. Furthermore, once ingested, modified mycotoxins can convert back to their parent forms. This concern has raised the need for analytical methods that can detect and quantify modified mycotoxins as essential for accurate risk assessment. The promising answer is liquid chromatography-mass spectrometry. New masked mycotoxin forms are now successfully detected by iontrap, time-of-flight, or high-resolution orbitrap mass spectrometers. However, the toxicological relevance of modified mycotoxins has not been fully clarified.

Occurrence of multi-class mycotoxins in Menthae haplocalycis analyzed by ultra-fast liquid chromatography coupled with tandem mass spectrometry

To determine the presence of multi-class mycotoxins in Menthae haplocalycis, a sample processing procedure based on a modified quick, easy, effective, rugged, and safe method, and a rapid and accurate testing method using ultra-fast performance liquid chromatography coupled with tandem mass spectrometry, was developed and validated. We systematically evaluated the methodology for multi-mycotoxin analysis in the Menthae haplocalycis samples, and chose matrix-matched calibration curves as a reference to calculate the recoveries. Overall, the average recoveries varied between 67.1 and 103%, with relative standard deviations ranging from 0.34 to 10.3%. The optimized and validated method was applied to detect the presence of the target mycotoxins in 40 batches of Menthae haplocalycis samples. Results showed that the levels of mycotoxins varied among the samples. The most prevalent mycotoxin was tentoxin, followed by alternariol, alternariol monomethyl ether, zearalenone, fumonisin B₂ , fumonisin B₁ , ochratoxin A, aflatoxin B₁ , aflatoxin B₂ , aflatoxin G₁ , and T-2 toxin. The analytical method developed herein could be applied for the routine monitoring of multi-mycotoxins in Menthae haplocalycis.

Nanoparticles as a Solution for Eliminating the Risk of Mycotoxins

Mycotoxins are toxic secondary metabolites produced by certain filamentous fungi. The occurrence of mycotoxins in food and feed causes negative health impacts on both humans and animals. Clay binders, yeast cell walls, or antioxidant additives are the most widely used products for mycotoxin elimination to reduce their impact. Although conventional methods are constantly improving, current research trends are looking for innovative solutions. Nanotechnology approaches seem to be a promising, effective, and low-cost way to minimize the health effects of mycotoxins. This review aims to shed light on the critical knowledge gap in mycotoxin elimination by nanotechnology. There are three main strategies: mold inhibition, mycotoxin adsorption, and reducing the toxic effect via nanoparticles. One of the most promising methods is the use of carbon-based nanomaterials. Graphene has been shown to have a huge surface and high binding capacity for mycotoxins. Attention has also been drawn to polymeric nanoparticles; they could substitute adsorbents or enclose any substance, which would improve the health status of the organism. In light of these findings, this review gives new insights into possible future research that might overcome challenges associated with nanotechnology utilization for mycotoxin elimination from agricultural products.

First study on trichothecene and zearalenone exposure of the Romanian population through wheat-based products consumption

In this study, a dietary exposure assessment of mycotoxins was conducted for the Romanian population using the contamination data of a various categories of wheat-based products for direct human consumption. Wheat-based foods (n = 181) commercialized in Romania, including flour, bread, biscuits, breakfast cereals and pasta, were evaluated by GC-QqQ-MS/MS for the occurrence of deoxynivalenol (DON), 3-acetyldeoxynivalenol (3AcDON), 15-acetyldeoxynivalenol (15AcDON), fusarenon-X, nivalenol, HT-2 and T-2 toxins, diacetoxyscirpenol, neosolaniol and zearalenone (ZEA). DON and 15AcDON were detected in 63 and 5% of all the analyzed samples, whereas 13-AcDON, HT-2, T-2, NIV and ZEA were not detected. Exposure of Romanian adult population was assessed, the EDIs for the sum of DON+3AcDON+15AcDON were 669 ng kg^-1 bw day^-1 at low-bound estimation, and 690 ng kg^-1 bw day^-1 at upper-bound estimation, being lower than the TDI set (1000 ng kg^-1 bw day^-1).

In-house validation and small-scale collaborative study to evaluate analytical performances of multimycotoxin screening methods based on liquid chromatography-high-resolution mass spectrometry: Case study on Fusarium toxins in wheat

A strong trend toward using highly selective mass spectrometry technologies for screening of multiple mycotoxins has been observed in recent years. In the present study, the process of validation of a multimycotoxin screening method based on liquid chromatography-high-resolution mass spectrometry method is presented. The method was intended for the simultaneous screening of the major Fusarium toxins (deoxynivalenol, 3- and 15-acetyl deoxynivalenol, T-2 and HT-2 toxins, zearalenone, enniatins A, A1, B, and B1, and beauvericin) in wheat. The sample preparation protocol was based on a double extraction (methanol followed by acetonitrile/water mixture) and purification through solid-phase extraction C18 column. To provide insights for full exploitation of the potential of the double-stage high-resolution mass spectrometry detection, a full-scan acquisition event followed by a sequence of 5 fragmentation events (variable data-independent acquisition) was set for mycotoxin detection, the latter to be exploited for confirmatory purposes. Method analytical performances were evaluated through in-house validation and small-scale interlaboratory study, designed according to Commission Regulation 519/2014/EU, setting performance requirements for screening methods for mycotoxins. Screening target concentrations were close to European Union maximum permitted or indicative levels. The in-house validation provided the precision of the response under repeatability conditions and the intermediate precision (both resulting lower than 30%), the cutoff value, and the rate of false suspect results for negative (free of the mycotoxin of interest) samples, which resulted lower than 0.1% in all cases. The collaborative study provided reproducibility and laboratory independent cutoff values. Analysis of reference materials proved method trueness and suitability for screening of the major Fusarium mycotoxins in wheat. Finally, the applicability of the full-scan/variable data-independent acquisition detection approach was successfully tested on a set of naturally contaminated wheat samples, where 2 characteristic product ions could be detected for all identified mycotoxins even at levels in the low μg/kg range.

Overview of the activities of the European Food Safety Authority on mycotoxins in food and feed

Mycotoxins are widely occurring in foods and feeds and dietary exposure to them can induce various types of adverse health effects in humans and animals. Since its establishment in 2002, the European Food Safety Authority (EFSA) has assessed risks of dietary exposure to mycotoxins for public health and for the health of farm and companion animals on the request of the European Commission and has assessed safety and efficacy of feed additives for the reduction of contamination of feed by mycotoxins within the European Union authorisation process for feed additives. Over 40 scientific opinions on risks of mycotoxins for human and animal health and other reports on mycotoxins have been issued by the authority for the use of the European risk managers. Mycotoxins belong to one of the important areas of the EFSA work. Occurrence data on mycotoxins submitted to EFSA by the European national food safety bodies and research institutions have been collected in the EFSA databases and have informed its scientific opinions and reports on mycotoxins. Similarly, many EFSA-funded projects conducted by the European research organisations, not only to generate data on occurrence, but also data on toxicity of mycotoxins, have provided valuable information for the risk assessments of EFSA. Aflatoxin and deoxynivalenol are the mycotoxins, for which EFSA has delivered most of its scientific mycotoxin opinions. Very recently also modified forms of mycotoxins have been included in the EFSA risk assessments. In this review paper an overview of many different EFSA activities on mycotoxins is given. It also includes a brief description how EFSA develops its scientific opinions and works.

Developments in mycotoxin analysis: an update for 2016-2017

This review summarises developments in the determination of mycotoxins over a period between mid-2016 and mid-2017. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone are covered in individual sections. Advances in proper sampling strategies are discussed in a dedicated section, as are methods used to analyse botanicals and spices and newly developed LC-MS based multi-mycotoxin methods. This critical review aims to briefly discuss the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

VHH Antibodies: Reagents for Mycotoxin Detection in Food Products

Mycotoxins are the toxic secondary metabolites produced by fungi and they are a worldwide public health concern. A VHH antibody (or nanobody) is the smallest antigen binding entity and is produced by heavy chain only antibodies. Compared with conventional antibodies, VHH antibodies overcome many pitfalls typically encountered in clinical therapeutics and immunodiagnostics. Likewise, VHH antibodies are particularly useful for monitoring mycotoxins in food and feedstuffs, as they are easily genetic engineered and have superior stability. In this review, we summarize the efforts to produce anti-mycotoxins VHH antibodies and associated assays, presenting VHH as a potential tool in mycotoxin analysis.

Ion mobility-derived collision cross section database: Application to mycotoxin analysis

The recent hyphenation of ion mobility spectrometry (IMS) with high resolution mass spectrometry (HRMS) has risen as a powerful technique for both targeted and non-targeted screening, reducing background noise and allowing separation of isomeric and isobaric compounds. Nevertheless, such an approach remains largely unexplored in food safety applications, such as mycotoxin analysis. To implement ion mobility in routinely MS-based mycotoxin workflows, searchable databases with collusion cross section (CCS) values and accurate mass-values are required. This paper provides for the first time a traveling-wave IMS (TWIMS)-derived CCS database for mycotoxins, including more than 100 CCS values. The measurements showed high reproducibility (RSD < 2%) across different instrumental conditions as well as several complex cereal matrices, showing a mean inter-matrix precision of RSD <0.9%. As a proof of concept, the database was applied to the analysis of several spiked as well as naturally incurred cereal-based samples. In addition, the effect of adducts on the drift time was studied in a series of mycotoxins in order to understand potential deviations from expected drift time behaviors. Overall, our study confirmed that CCS values represent a physicochemical property that can be used alongside the traditional molecular identifiers of precursor ion accurate mass, fragment ions, isotopic pattern, and retention time.

Advanced LC-MS-based methods to study the co-occurrence and metabolization of multiple mycotoxins in cereals and cereal-based food

Liquid chromatography (LC) coupled with mass spectrometry (MS) is widely used for the determination of mycotoxins in cereals and cereal-based products. In addition to the regulated mycotoxins, for which official control is required, LC-MS is often used for the screening of a large range of mycotoxins and/or for the identification and characterization of novel metabolites. This review provides insight into the LC-MS methods used for the determination of co-occurring mycotoxins with special emphasis on multiple-analyte applications. The first part of the review is focused on targeted LC-MS approaches using cleanup methods such as solid-phase extraction and immunoaffinity chromatography, as well as on methods based on minimum cleanup (quick, easy, cheap, effective, rugged, and safe; QuEChERS) and dilute and shoot. The second part of the review deals with the untargeted determination of mycotoxins by LC coupled with high-resolution MS, which includes also metabolomics techniques to study the fate of mycotoxins in plants.

Advances, challenges and opportunities for point-of-need screening of mycotoxins in foods and feeds

Recent advances in analytical methods for mycotoxin screening in foods and feeds are reviewed, focusing on point-of-need detection using integrated devices.