Confocal Microscopy of Disposable and Nondisposable Heads for the Moria M2 Microkeratome

Confocal microscopy evaluation of the corneal response following AcuFocus KAMRA inlay implantation

PURPOSE

To describe the corneal appearance on confocal microscopy after AcuFocus KAMRA Inlay (AcuFocus, Inc., Irvine, CA) implantation and evaluate the visual acuity compared to the confocal microscopy data.

METHODS

Twelve eyes of 12 patients implanted with one of three models of the AcuFocus KAMRA Inlay (ACI 7000, 7000T, and 7000PDT) were prospectively evaluated by confocal microscopy 6 months after implantation. Additionally, 4 eyes of 4 patients explanted during the follow-up period were evaluated.

RESULTS

Among the eyes implanted, mean epithelial thickness was 54.6 ± 22 μm. The subbasal nerve plexus was detected in 10 patients. The corneal nerves per unit area were 2.73 ± 2.1 sprouts/mm(2). The branch pattern was found in 8 patients. The mean keratocyte density value was 540 ± 210 cells/mm(2). A low grade of keratocyte activation was found in all patients. Among the eyes explanted, the mean wound healing opacity was 1,092.75 ± 1,877.35 μm/pixel.

CONCLUSIONS

The corneal tolerance to the KAMRA Inlay appeared to be good. The inlay modified the normal structure of the corneal layer, but it was not associated with severe complications of the eye. Keratocyte activation was the finding most associated with a negative visual outcome. Confocal microscopy can be useful to evaluate the long-term evolution of the corneal layer changes following KAMRA Inlay implantation.

The role of corneal innervation in LASIK-induced neuropathic dry eye

Almost half the patients who undergo laser in situ keratomileusis (LASIK) experience dry eye following the procedure. However, the etiology of LASIK-induced dry eye is unclear. The purpose of this review is to examine and summarize the current evidence for the etiology of LASIK-induced dry eye, with a focus on ocular surface sensitivity and corneal innervation. Evidence suggests that the alteration of corneal nerves after LASIK is the most likely cause of the subjective symptoms of LASIK-induced dry eye, even though corneal sensitivity and the clinical indicators of dry eye return to apparently normal values within a year due to the partial recovery of the corneal nerve plexus. The hypothesis is explored that dry eye symptoms following LASIK may result from abnormal sensation due to LASIK-induced corneal neuropathy. Other factors, such as alterations in conjunctival goblet cell density, might also contribute to the symptoms and signs of LASIK-induced dry eye. Inter-relationships between nerve morphology, tear neuropeptide levels and dry eye require further investigation. A better understanding of this phenomenon may result in improved management of post-LASIK dry eye.

Finite element model of the temperature increase in excised porcine cadaver iris during direct illumination by femtosecond laser pulses

In order to model the thermal effect of laser exposure of the iris during laser corneal surgery, we simulated the temperature increase in porcine cadaver iris. The simulation data for the 60 kHz FS60 Laser showed that the temperature increased up to 1.23°C and 2.45°C (at laser pulse energy 1 and 2 [micro sign]J, respectively) by the 24 second procedure time. Calculated temperature profiles show good agreement with data obtained from ex vivo experiments using porcine cadaver iris. Simulation results of different types of femtosecond lasers indicate that the Laser in situ keratomileusis procedure does not present a safety hazard to the iris.

Simulation of the temperature increase in human cadaver retina during direct illumination by 150-kHz femtosecond laser pulses

We have developed a two-dimensional computer model to predict the temperature increase of the retina during femtosecond corneal laser flap cutting. Simulating a typical clinical setting for 150-kHz iFS advanced femtosecond laser (0.8- to 1-μJ laser pulse energy and 15-s procedure time at a laser wavelength of 1053 nm), the temperature increase is 0.2°C. Calculated temperature profiles show good agreement with data obtained from ex vivo experiments using human cadaver retina. Simulation results obtained for different commercial femtosecond lasers indicate that during the laser in situ keratomileusis procedure the temperature increase of the retina is insufficient to induce damage.

Comparison of the predictability, uniformity and stability of a laser in situ keratomileusis corneal flap created with a VisuMax femtosecond laser or a Moria microkeratome

This prospective study compared the predictability, uniformity and stability of laser in situ keratomileusis corneal flap thickness created by a femtosecond laser or a classic microkeratome. Twenty-five femtosecond laser (VisuMax, Carl Zeiss Meditec) flaps and 38 microkeratome (Moria M3) flaps were measured using anterior segment optical coherence tomography at 1 week, 1 month and 6 months postoperatively. Flap thickness at seven points on each of the four meridians was calculated. At 6 months, VisuMax flaps showed better prediction than Moria flaps for central flap thickness. The standard deviation within individual flaps was smaller for VisuMax flaps and their index of symmetry was better. The mean thicknesses among the four eccentricities in the VisuMax flaps were the same, while Moria flaps were thicker at the 3-mm radius compared with the centre. The VisuMax femtosecond laser created corneal flaps with better predictability and uniformity, and similar reproducibility and stability, compared with the microkeratome.

Temperature increase in porcine cadaver iris during direct illumination by femtosecond laser pulses

PURPOSE

To measure the temperature rise in porcine cadaver iris during direct illumination by the femtosecond laser as a model for laser exposure of the iris during femtosecond laser corneal surgery.

SETTING

Department of Ophthalmology, University of California-Irvine, Irvine, California, USA.

DESIGN

Experimental study.

METHODS

The temperature increase induced by a 60 kHz commercial femtosecond laser in porcine cadaver iris was measured in situ using an infrared thermal imaging camera at pulse energy levels ranging from 1 to 2 μJ (corresponding approximately to surgical energies of 2 to 4 μJ per laser pulse).

RESULTS

Temperature increases up to 2.3 °C (corresponding to 2 μJ and 24-second illumination) were observed in the porcine cadaver iris with little variation in temperature profiles between specimens for the same laser energy illumination.

CONCLUSIONS

The 60 kHz commercial femtosecond laser operating with pulse energies at approximately the lower limit of the range evaluated in this study would be expected to result in a 1.2 °C temperature increase and therefore does not present a safety hazard to the iris.

Temperature increase in human cadaver retina during direct illumination by femtosecond laser pulses

PURPOSE

Femtosecond lasers have been approved by the US Food and Drug Administration for ophthalmic surgery, including use in creating corneal flaps in LASIK surgery. During normal operation, approximately 50% to 60% of laser energy may pass beyond the cornea, with potential effects on the retina. As a model for retinal laser exposure during femtosecond corneal surgery, we measured the temperature rise in human cadaver retinas during direct illumination by the laser.

METHODS

The temperature increase induced by a 150-kHz iFS Advanced Femtosecond Laser (Abbott Medical Optics) in human cadaver retinas was measured in situ using an infrared thermal imaging camera. To model the geometry of the eye during the surgery, an approximate 11x11-mm excised section of human cadaver retina was placed 17 mm behind the focus of the laser beam. The temperature field was observed in 10 cadaver retina samples at energy levels ranging from 0.4 to 1.6 microJ (corresponding approximately to surgical energies of 0.8 to 3.2 microJ per pulse).

RESULTS

Maximal temperature increases up to 1.15 degrees C (corresponding to 3.2 microJ and 52-second illumination) were observed in the cadaver retina sections with little variation in temperature profiles between specimens for the same laser energy illumination.

CONCLUSIONS

The commercial iFS Advanced Femtosecond Laser operating with pulse energies at approximately the lower limit of the range evaluated in this study would be expected to result in a 0.2 degrees C temperature increase and do not therefore present a safety hazard to the retina.

A Longitudinal Study of LASIK Flap and Stromal Thickness with High-speed Optical Coherence Tomography

OBJECTIVE

To assess corneal anatomic changes after LASIK with a high-speed corneal and anterior segment optical coherence tomography (CAS-OCT) system.

DESIGN

Cross-sectional observational study.

PARTICIPANTS

Fifty-one eyes of 26 healthy persons undergoing LASIK.

METHODS

The CAS-OCT prototype operated at a 1.3-mum wavelength and 2000 axial scans/second. The corneas were scanned with a flap profile pattern (horizontal line, 512 axial scans) and a flap map pattern (4 radials, 256 axial scans each). Both patterns are 8 mm long and are centered on the corneal vertex. LASIK flaps were created using either a mechanical microkeratome (Hansatome; Bausch & Lomb, Inc., Rochester, NY) or a femtosecond laser (Pulsion; IntraLase Corp., Irvine, CA). Intraoperative pachymetry was performed using a 50-MHz ultrasound probe. Three OCT scans were obtained on preoperative and post-LASIK visits up to 6 months. An automated algorithm was developed to process the OCT images and to calculate corneal, flap, and stromal bed thickness profiles and maps. The profiles and maps were divided into central (diameter, <2 mm), pericentral (2-5 mm), and transitional (5-7 mm) zones for analysis.

MAIN OUTCOME MEASURES

Corneal, flap, and stromal bed thicknesses as determined by OCT and ultrasound pachymetry.

RESULTS

The flap interface was best detected in the pericentral zone. One week after surgery, the repeatability of OCT flap and stromal bed thickness measurement was 2 to 7 microm by pooled standard deviation for zones inside a 5-mm diameter. The central flap thickness in 24 Hansatome eyes with a 180-microm setting was 143+/-14 microm by OCT and 131+/-17 microm by ultrasound. In the 8 IntraLase cases with a 120-microm setting, it was 156+/-11 microm by OCT and 160+/-19 microm by ultrasound. Eyes with other settings also were analyzed. There were small systematic changes in flap thickness up to 1 week and bed thickness up to 3 months.

CONCLUSIONS

We have developed a method for using high-speed OCT to measure LASIK flap thickness after surgery. The measurement is noncontact, rapid, and repeatable. Profile and map measurements provide more information than point measurements previously demonstrated. This could be valuable for planning LASIK enhancement and characterizing microkeratome performance.

Treatment of Ocular Surface Syndrome After LASIK With Autologous Platelet-rich Plasma

PURPOSE

To ascertain the usefulness of platelet-rich plasma in the treatment of patients suffering from symptomatic ocular surface syndrome following LASIK.

METHODS

Twenty-six eyes (9 women and 4 men) affected by symptomatic ocular surface syndrome were treated with topical eye drops of autologous platelet-rich plasma and results were reported at 4 weeks. Topical platelet-rich plasma was prepared from total blood and enriched in platelets by centrifugation.

RESULTS

Eighty-five percent of patients experienced significant improvement of symptoms; best spectacle-corrected visual acuity increased 1 to 2 lines in 54%; fluorescein staining analysis showed a 69% full fluorescein disappearance; and tear break-up time increased > 2 seconds in 46%. Only one patient developed intolerance to platelet-rich plasma after 4 weeks.

CONCLUSIONS

Autologous platelet-rich plasma was effective in the treatment of patients with ocular surface syndrome following LASIK, with symptoms generally relieved and a positive effect on punctate keratitis.

Confocal Microscopy Comparison of IntraLase Femtosecond Laser and Moria M2 Microkeratome in LASIK

PURPOSE

To analyze the quality of LASIK flaps created using a femtosecond laser or a mechanical microkeratome.

METHODS

A prospective study of consecutive bilateral LASIK flaps (100 patients) created with a 15 kHz femtosecond laser (IntraLase) or with a mechanical microkeratome (Moria M2) was performed. Outcome measures included visual and refractive outcomes, flap dimensions, and intraoperative complications. The first consecutive ten patients (20 eyes) were examined using confocal microscopy 1 and 3 months following surgery.

RESULTS

No significant differences were noted in the visual outcomes between groups (t test, P > .05 for all comparisons). Analysis of superficial measurements revealed more round flaps and greater predictability in surface dimensions for the femtosecond laser group (t test, P = .016). Mean deviation of flap thickness from target was the same for both instruments, 10 microm, with greater variability for the mechanical microkeratome. The incidence of diffuse lamellar keratitis was significantly greater in the femtosecond laser group (17%) than in the mechanical group (0%) (chi-square test, P < .001). Confocal microscopy revealed a higher wound healing opacity index in the femtosecond laser group.

CONCLUSIONS

Although the clinical results are similar, the femtosecond laser produces LASIK flaps with more accurate dimensions compared to the mechanical microkeratome.