Efficacy versus health risks: An in vitro evaluation of power-driven scalers

Influence of Adjunctive Photodynamic Therapy on Interleukin-6, Interleukin-8, and Interleukin-10 Gingival Crevicular Fluid Levels in Chronic Periodontitis - A Randomized Controlled Trial

Background:

Numerous studies have assessed the effect of photodynamic therapy (PDT) both as a primary mode of treatment and as an adjunct to scaling and root planing in the treatment of periodontitis. Some results were nondefinitive and, in part, inconsistent with respect to the clinical and biochemical effects. Hence, the aim of this study was to evaluate the effect of PDT as an adjunct to nonsurgical periodontal therapy (NSPT) on the gingival crevicular fluid (GCF) interleukin-6 (IL-6), IL-8, and IL-10 levels in the treatment of chronic periodontitis (CP).

Materials and Methods:

In 21 patients with CP, two contralateral sites (premolar and molar) were randomly divided into: control sites (treated with NSPT only) and test sites (treated with NSPT + PDT). Clinical parameters including bleeding on probing (BOP), probing pocket depth, clinical attachment level were evaluated at baseline, 1- and 3 months and biochemical parameters of GCF levels of IL-6, IL-8, and IL-10 were evaluated at baseline and 3-month post-therapy through enzyme-linked immunosorbant assay.

Results:

A greater improvement in BOP score at 1 month (41.10% ± 3.58%) and 3-months (38.00% ± 3.62%) posttherapy was found in the test site as compared to control site. Regarding cytokines, test sites exhibited significant reductions in IL-6 (4.29 ± 0.67 pg/ml) and IL-8 (308.16 ± 36.04 pg/ml) levels and increase in IL-10 (14.25 ± 0.83 pg/ml) level at 3 months (P < 0.0001).

Conclusion:

Additional application of PDT, adjunctive to NSPT, resulted in a significant reduction in BOP score as well as GCF pro-inflammatory cytokine levels along with an increase in anti-inflammatory cytokine levels, compared to NSPT alone.

Dental Aerosol as a Hazard Risk for Dental Workers

Standard dental procedures, when using a water coolant and rotary instruments, generate aerosols with a significantly higher number of various dangerous pathogens (viruses, bacteria, and fungi). Reducing the amount of aerosols to a minimum is mandatory, especially during the new coronavirus disease, COVID-19. The study aimed to evaluate the amount of aerosol generated during standard dental procedures such as caries removal (using dental bur on a high and low-speed handpiece and Er:YAG laser), ultrasonic scaling, and tooth polishing (using silicon rubber on low-speed handpiece) combined with various suction systems. The airborne aerosols containing particles in a range of 0.3-10.0 μm were measured using the PC200 laser particle counter (Trotec GmbH, Schwerin, Germany) at three following sites, manikin, operator, and assistant mouth, respectively. The following suction systems were used to remove aerosols: saliva ejector, high volume evacuator, saliva ejector with extraoral vacuum, high volume evacuator with extraoral vacuum, Zirc® evacuator (Mr.Thirsty One-Step®), and two customized high volume evacuators (white and black). The study results showed that caries removal with a high-speed handpiece and saliva ejector generates the highest amount of spray particles at each measured site. The aerosol measurement at the manikin mouth showed the highest particle amount during caries removal with the low and high-speed handpiece. The results for the new high volume evacuator (black) and the Zirc® evacuator showed the lowest increase in aerosol level during caries removal with a high-speed handpiece. The Er:YAG laser used for caries removal produced the lowest aerosol amount at the manikin mouth level compared to conventional dental handpieces. Furthermore, ultrasonic scaling caused a minimal aerosol rise in terms of the caries removal with bur. The Er:YAG laser and the new wider high volume evacuators improved significantly suction efficiency during dental treatment. The use of new suction systems and the Er:YAG laser allows for the improvement of biological safety in the dental office, which is especially crucial during the COVID-19 pandemic.

Clinical Evaluation of Diode (980 nm) Laser-Assisted Nonsurgical Periodontal Pocket Therapy: A Randomized Comparative Clinical Trial and Bacteriological Study

Background: Mechanical debridement is the gold standard in the periodontitis therapy. However, it is suggested that adjunctive use of lasers can result in a more effective treatment outcome. Objective: Evaluate the efficiency of diode laser-assisted nonsurgical therapy of periodontitis as adjunctive to scaling and root planing (SRP). Methods: One hundred sixty vertical bone defects [pocket depth (PD) at baseline ≥6 mm] had been randomly allocated to receive SRP alone (group C) or SRP coupled to a diode laser (980 nm) protocol (group C+L): SRP, irrigation with hydrogen peroxide solution (3%), de-epithelization of the internal and external gingiva followed by blood stabilization, and coagulation by laser beam were made. Beam parameters: 10 μsec/pulse duration, 10 kHz, pick power of 10 W, average power of 1 W, and fiber diameter of 400 μm. Plaque index (PI), bleeding on probing, gingival recession (GR), clinical attachment level (CAL), and PD were measured at baseline, at 6 weeks, 12 weeks, 18 weeks, 6 months, and 12 months. Microbiological data were collected randomly from 26 pockets from both groups at baseline, 6 weeks, 12 weeks, and 6 months after treatment. Results: At all periods of follow-up, there was a significant difference between both groups in all clinical parameters except in GR. In group C+L, 76% of pockets had PD ≤3 mm after 12 months of follow-up and an average of PD = 1.77 ± 0.46 mm, while 56% of pockets in group control (C) had an average of PD = 5.00 ± 0.83 mm after 12 months of follow-up. Total bacteria count in group C + L was significantly lower compared to group C only at 12 weeks and 6 months of follow-up. Furthermore, there was high significant decrease in the number of Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, and Prevotella intermedia at all the follow-up periods. Conclusions: As adjunctive to SRP, diode laser-assisted nonsurgical therapy of periodontitis has significantly improved clinical parameters of PI and POB and has significantly reduced the clinical attachment loss (CAL) and PD compared to the control group after 1 year of follow-up. A significant reduction in periodontal pathogens has been observed in group C + L only at 12 weeks and 6 months of follow-up.

Demystifying the mist: Sources of microbial bioload in dental aerosols

The risk of transmitting airborne pathogens is an important consideration in dentistry and has acquired special significance in the context of recent respiratory disease epidemics. The purpose of this review, therefore, is to examine (1) what is currently known regarding the physics of aerosol creation, (2) the types of environmental contaminants generated by dental procedures, (3) the nature, quantity, and sources of microbiota in these contaminants and (4) the risk of disease transmission from patients to dental healthcare workers. Most dental procedures that use ultrasonics, handpieces, air‐water syringes, and lasers generate sprays, a fraction of which are aerosolized. The vast heterogeneity in the types of airborne samples collected (spatter, settled aerosol, or harvested air), the presence and type of at‐source aerosol reduction methods (high‐volume evacuators, low volume suction, or none), the methods of microbial sampling (petri dishes with solid media, filter paper discs, air harvesters, and liquid transport media) and assessment of microbial bioload (growth conditions, time of growth, specificity of microbial characterization) are barriers to drawing robust conclusions. For example, although several studies have reported the presence of microorganisms in aerosols generated by ultrasonic scalers and high‐speed turbines, the specific types of organisms or their source is not as well studied. This paucity of data does not allow for definitive conclusions to be drawn regarding saliva as a major source of airborne microorganisms during aerosol generating dental procedures. Well‐controlled, large‐scale, multi center studies using atraumatic air harvesters, open‐ended methods for microbial characterization and integrated data modeling are urgently needed to characterize the microbial constituents of aerosols created during dental procedures and to estimate time and extent of spread of these infectious agents.

Calculus Removal and Root Surface Roughness When Using the Er:YAG or Er,Cr:YSGG Laser Compared with Conventional Instrumentation Method: A Literature Review

Objective: The purpose of this literature review was to evaluate the effectiveness of using Er:YAG (erbium-doped yttrium/aluminum/garnet) laser or Er,Cr:YSGG (erbium, chromium-doped yttrium/scandium/gallium/garnet) laser on calculus removal and their effect on the topography and roughness of root surface in comparison with the conventional instruments in the nonsurgical periodontal therapy. Background data: One of the most challenging problems in treatment of periodontal disease is the elimination of plaque and calculus, leaving a clean and smooth root surface to decrease plaque and calculus retention, and for good gingival reattachment. Materials and methods: PubMed and Google Scholar were searched for available literature. The electronic search was limited to articles published in the period between January 2007 and April 2017, in the English language. Results: A total of 47 publications fulfilled the inclusion criteria of this systematic review and screened according to the research questions. Calculus removal using the ultrasonic instrument showed remaining calculus compared with the hand instrument, whereas, on the contrary, erbium lasers revealed no remaining calculus or smaller amounts compared with the conventional instruments when used in appropriate settings. The results of this review showed that ultrasonic instrumentation produced effects on the root surface almost similar to that of hand instrumentation. Er:YAG laser and Er,Cr:YSGG laser clarify a little more surface roughness when compared with conventional instruments. Conclusions: The present systematic review indicates that a combination of scaling and root planing (SRP) using the erbium lasers as an adjunctive therapy at certain parameters can be appropriate to remove residual debris from the root surface and at the same time have little or no negative thermal effect on the root surface. The Er:YAG laser also seems to be the most suitable for nonsurgical periodontal therapy. Additional new good-designed studies are needed to evaluate the effectiveness of erbium lasers with SRP in nonsurgical periodontal therapy.

Efficacy of photodynamic therapy vs ultrasonic scaler for preventing gingival inflammation and white spot lesions during orthodontic treatment

INTRODUCTION

The complex designs of fixed orthodontic appliances hinder proper access for cleaning, favouring the development of gingival inflammation and white spot lesions around brackets. The aim of this study was to evaluate the effectiveness to avoid these undesirable effects by using two prophylactic methods: Photodynamic Therapy (PDT) and conventional ultrasonic scaler (US), in patients during fixed orthodontic treatment.

MATERIALS AND METHODS

Twenty patients under orthodontic treatment for at least 15 months were randomly divided into two groups: PDT mediated by methylene blue (MB) and US. Both treatments were applied in repeated doses (four times in intervals of 2 weeks in the beginning of the study (T0), with booster doses at 3, 6 and 9 months, T1, T2 and T3, respectively). Periodontal clinical parameters (full-mouth plaque score (FMPS), full-mouth bleeding score (FMBS) and probing depth (PD)) were recorded as well as the International Caries Detection and Assessment System (ICDAS) index. Samples of subgingival plaque and saliva (for determination of 4 periodontopathogens and mutans streptococci, respectively), were collected at T0 and at the follow-ups of T1, T2 and T3.

RESULTS

The evolution of FMPS, FMBS, PD, ICDAS scores as well as the counts of periodontopathogens and salivary mutans streptococci was similar after US or PDT implementation. Greatest periodontal scores reduction took place at T1 for FMBS and PD and at T2 for FMPS. Main microbial reduction took place at T1. ICDAS index began to increase from T2. No statistically significant intergroup differences were observed.

CONCLUSIONS

Additional treatment of PDT or US in repeated doses delayed undesired side effects during fixed orthodontic treatment in young patients with low caries risk and signs of gingival inflammation.

Removal of simulated biofilm: an evaluation of the effect on root surfaces roughness after scaling

BACKGROUND

Despite the development of less invasive devices, a debate exists about the benefits and risks of hand versus powered root surface instrumentation used in supportive periodontal therapy (SPT). The aim of the in vitro study was to differentially compare plaque removal efficacy and root surface roughening of newly developed sonic, ultrasonic scaler, and curettes in the hands of experienced versus less experienced operators.

MATERIALS AND METHODS

Sonic (AIR), ultrasonic devices (TIG), and double-gracey curettes (GRA) were utilized by seven experienced (EO) and four less experienced operators (LO) for root surface instrumentation of standardized plastic teeth on manikins' heads in a randomized sequence. The proportion of residual simulated plaque (RSP area in %) was planimetrically assessed, and the average root surface roughness produced (Ra and ∆Ra in μm) was measured by a precision profilometer.

RESULTS

The uninstrumented root surfaces showed a Ra of (median (Q25/Q75)) 1.00 μm (0.83/1.16). Following instrumentation, EO left significantly less RSP than LO regardless of the used instruments (20.00 % (10.00/34.00) vs. 26.00 % (12.00/44.00) p < 0.001), whereas the ∆Ra values (0.29 μm (-0.04/0.96) vs. 0.35 μm (-0.04/1.01), p = 0.237) failed to show significant differences. The surface roughness was higher with GRA followed by AIR then TIG regardless of operators' experience (p < 0.001).

CONCLUSION

Within the limits of the present study, the sonic device was most efficient in plaque removal, while the ultrasonic device produced the least surface roughness.

CLINICAL RELEVANCE

All three tested instruments seem effective in the mechanical root debridement during SPT, whereat the ultrasonic device show the smoothest root surface of all.

Removal of simulated biofilm: a preclinical ergonomic comparison of instruments and operators

BACKGROUND

Periodontal scaling might cause musculoskeletal disorders, and scaling instruments might not only have different effectiveness and efficiency but also differ in their ergonomic properties. The present study assessed ergonomic working patterns of experienced (EO) and less experienced operators (LO) when using hand and powered devices for periodontal scaling and root planning.

METHODS

In an experimental study using periodontally affected manikins, sonic (AIR), ultrasonic (TIG) and hand instruments (GRA) were used by 11 operators (7 EO/4 LO) during simulated supportive periodontal therapy. Using an electronic motion monitoring system, we objectively assessed the working frequency and positioning of hand, neck and head. Operators' subjective evaluation of the instruments was recorded using a questionnaire.

RESULTS

Hand instruments were used with the lowest frequency (2.57 ± 1.08 s(-1)) but greatest wrist deviation (59.57 ± 53.94°). EO used instruments more specifically than LO, and generally worked more ergonomically, with less inclination of head and neck in both the frontal and sagittal planes, especially when using hand instruments. All groups found hand instruments more tiring and difficult to use than powered instruments.

CONCLUSION

Regardless of operators' experience, powered instruments were used more ergonomically and were subjectively preferred compared to hand instruments.

CLINICAL RELEVANCE

The use of hand instruments has potential ergonomic disadvantages. However, with increasing experience, operators are able to recognise and mitigate possible risks.