Controlling the vector of distraction osteogenesis in the management of obstructive sleep apnea

Does distraction osteogenesis improve the airway volume and quality of life of obstructive sleep apnoea patients secondary to temporomandibular joint ankylosis?

Temporomandibular joint (TMJ) ankylosis leads to mandibular micrognathia that severely collapses the upper airway causing obstructive sleep apnoea (OSA), resulting in deterioration and compromise in the quality of life (QoL) of patients. In this study, we aimed to calculate airway volume changes, apnoea-hypopnoea index (AHI), and improvement in quality of life before and after distraction osteogenesis (DO). Fourteen Patients with OSA secondary to TMJ ankylosis at a mean (SD) age of 17.5 (5.43) years were enrolled in this prospective study. Multivector mandibular distractors were used in all patients following the standard Ilizarov distraction protocol with a mean (SD) anteroposterior distraction of 16.21 (4.37) mm and a consolidation period of 116.92 (14.35) days. The patients were followed up for six months. A polysomnography test (PSG) was done to quantify AHI and a low-dose computed tomographic scan was done to calculate airway volume using Dolphin medical imaging software pre and post-DO. The QoL of the patients was calculated using the OSA-18 questionnaire. Results analysis depicted that the mean (SD) preoperative AHI was 51.44 (37.99)/h which was improved to 9.57 (9.74)/h (p = 0.001) after DO. Airway volume was calculated on Dolphin software before and after DO showed a significant improvement in airway volume by 121.12% (98.30)%. Similarly, the OSA-18 questionnaire showed significant improvement in QoL from severe to normal. This study suggested that DO increases the corpus length of the mandible, leading to an increment in airway volume, which improves the QoL.

A New Orthodontic-Surgical Approach to Mandibular Retrognathia

(1) Background: Mandibular deficiency is one of the most common growth disorders of the facial skeleton. Recently, distraction osteogenesis has been suggested as the treatment of choice for overcoming the limitations of conventional orthognathic surgery; (2) Methods: A new custom-manufactured dental-anchored distractor was built and anchored in the first molar and lower canine. It consists of a stainless-steel disjunction screw, adapted and welded to the orthodontic bands through two 1.2 mm diameter connector bars with a universal silver-based and cadmium-free solder; (3) Results: The distractor described can be a useful tool to correct mandibular retrognathia and is better tolerated by patients, especially in severe cases; (4) Conclusions: The dental-anchored distractor increases the anterior mandibular bone segment without affecting the gonial angle or transverse angulation of the segments and avoids posterior mandibular rotation, overcoming the limitations of conventional surgical treatment.

Latency phase in mandibular distraction osteogenesis: a systematic review in animal models

The aim of the present study was to perform a systematic review of the need for the latency period in distraction osteogenesis to obtain adequate bone formation. Searches were performed in the Web of Science, Pubmed/MEDLINE, Scopus, and Cochrane electronic databases. Nine articles were selected for qualitative analysis. Quality assessment was performed using the 10-item SYRCLE tool. Clinical stability was evaluated in two articles, histology was analysed in seven, histomorphometry was analysed in three, and mechanical testing was used in two. The results favoured the five-day latency group in two studies and the seven-day latency group in one. No differences were found between latency and no-latency groups in six studies. A latency period greater than seven days did not provide any additional benefit. Important risks of bias were found in all articles. Some of the results were influenced by uncontrolled intervening factors, such as consolidation time. The need for a latency period for distraction osteogenesis in animal models is not yet clear. Caution must be exercised when extrapolating the results of animal protocols to applications with humans in the clinical setting.

Advanced interdisciplinary treatment protocol for pediatric obstructive sleep apnea including medical, surgical, and orthodontic care: a narrative review

OBJECTIVE

To suggest an updated interdisciplinary treatment protocol for pediatric obstructive sleep apnea (POSA) based on the integration of craniofacial growth modification into medical and surgical sleep practice.

METHODS

PubMed, Scopus, and Cochrane library were searched up to February 2020 using keywords. Among 184 articles, 80 studies were finally included. An integrated treatment protocol for POSA encompassing craniofacial skeletal management as well as medical and surgical care was attempted.

RESULTS

A differential diagnostic workflow for identifying the phenotype of POSA was suggested, and a phenotype-based treatment protocol for POSA was proposed. Despite the lack of high level of evidence, timely skeletal growth modification in three dimensions using craniofacial growth potential could be valuable treatment for upper airway development in POSA patients with craniofacial phenotypic cause.

CONCLUSION

A novel precision treatment protocol will advance clinicians to determine the primary option or to apply the combined strategy for POSA patients.

Distraction Osteogenesis Versus Orthognathic Surgery: Demystifying Differences in Concepts, Techniques and Outcomes

Introduction

The popularity and interest evoked by orthognathic surgery and distraction osteogenesis are undisputed in the field of oral and maxillofacial surgery. However, questions regarding the individual identities of either of them with clarity in their concepts, techniques and outcomes have remained unanswered. The aim of this review is to shed light on these questions.

Methods

This review is structured as a narrative review of thirty years of literature available in the specialities of orthognathic surgery and distraction osteogenesis.

Conclusion

The authors present a review of existing literature combined with contrasting experience gained over the years in providing an overview of the merits and demerits of the two surgical techniques which will aid the clinician in justifying the use of one technique over the other.

Classification of Subtypes of Apert Syndrome, Based on the Type of Vault Suture Synostosis

Supplemental Digital Content is available in the text.

Background:

Apert syndrome patients are different in clinical pathology, including obstructive sleep apnea, cleft palate, and mental deficiency. These functional deficiencies may be due to anatomic deformities, which may be caused by different forms of associated suture fusion. Therefore, a classification system of Apert syndrome based on the type of craniosynostosis pattern might be helpful in determining treatment choices.

Methods:

CT scans of 31 unoperated Apert syndrome and 51 controls were included and subgrouped as: class I. Bilateral coronal synostosis; class II. Pansynostosis; and class III. Perpendicular combination synostosis: a. unilateral coronal and metopic synostosis; b. sagittal with bilateral/unilateral lambdoid synostosis; and c. others.

Results:

Class I is the most common (55%) subtype. The cranial base angulation of class I was normal; however, the cranial base angulation on the cranium side of the skull in class II increased 12.16 degrees (P = 0.006), whereas the facial side cranial base angle of class IIIa decreased 4.31 degrees (P = 0.035) over time. The external cranial base linear measurements of class I showed more evident reduction in anterior craniofacial structures than posterior, whereas other subtypes developed more severe shortening in the posterior aspects.

Conclusions:

Bicoronal synostosis is the most common subtype of Apert syndrome with the normalized cranial base angulation. Combined pansynostosis patients have flatter cranial base, whereas the combined unilateral coronal synostosis have a kyphotic cranial base. Class I has more significant nasopharyngeal airway compromise in a vertical direction, whereas classes II and III have more limited oropharyngeal space.

Versatility of uniplanar prearthoplastic distraction osteogenesis in the correction of post-ankylosis facial deformities-a report of five different cases

PURPOSE

Unilateral or bilateral ankylosis can lead to severe micrognathia and facial deformity that requires multiple, often, staged surgical corrections. To date, there is no ideal treatment modality that satisfactorily corrects the complex anatomy, restores the ramal height, and corrects the micrognathia and microgenia. Distraction osteogenesis has been acclaimed as a successful modality for the treatment of such deformities. It is a cost-effective approach with low morbidity and less relapse thus providing better functional and esthetic outcomes. It allows the surgeon to correct the deformity in various planes by using various devices by changing osteotomy designs and vectors, with simultaneous hard tissue and soft tissue reconstruction.

PATIENTS AND METHODS

Here, we present a series of five cases where different types of distraction osteogenesis were combined with various other procedures to correct post-ankylotic facial asymmetry. In one case, simultaneous maxillo-mandibular distraction [Molina's technique] was used.

RESULTS

All patients showed significant improvement in function and esthetics. Outcome assessment was made using clinical photographs and radiographs.

CONCLUSION

Pre-arthroplastic distraction osteogenesis is a versatile cost effective approach that can be customized for every patient based on their needs.

Management of Severely Atrophic Maxilla in Ectrodactyly Ectodermal Dysplasia-cleft Syndrome

Background:

Ectrodactyly ectodermal dysplasia-cleft syndrome is a rare genetic syndrome with an incidence of 1/90,000 live births, characterized by cleft lip and palate, severely hypoplastic maxilla, and hypodontia. Patients diagnosed with ectrodactyly ectodermal dysplasia-cleft syndrome suffer from a severely hypoplastic maxilla that is highly difficult to treat using traditional orthognathic methods. In this study, we propose using distraction osteogenesis to achieve a major advancement while maintaining good stability and minimal relapse. To our knowledge, this is the first description of patients with this syndrome treated using distraction osteogenesis.

Methods:

Five patients diagnosed with ectrodactyly ectodermal dysplasia-cleft syndrome were included in the study. All patients had been operated on according to the well-established protocol of cleft lip and palate reconstruction before maxillary distraction osteogenesis. Hard and soft-tissue changes were evaluated by cone beam computed tomography and lateral cephalograms before distraction osteogenesis (T1), at the postdistraction point (T2) and after 1 year of follow-up (T3).

Results:

Examination revealed marked maxillary advancement in all our patients with a significant mean difference in hard tissue parameters (condylion to A point = 18 mm; nasion-sella line to A point = 15.2 degrees) and a notable improvement in facial convexity (20.9 degrees). One year follow-up measurements demonstrated mild relapse rates of 6% in the horizontal plane.

Conclusions:

We conclude that despite the challenging anatomic and physiological features of ectrodactyly ectodermal dysplasia-cleft patients, by enhancing current surgical techniques, there is promising potential for improved patient outcomes, achieving normognathic facial appearance with implant supported rehabilitation.

Two-stage reconstruction of the severely deficient alveolar ridge: bone graft followed by alveolar distraction osteogenesis

Distraction osteogenesis for the augmentation of severe alveolar bone deficiency has gained popularity during the past two decades. In cases where the vertical bone height is not sufficient to create a stable transport segment, performing alveolar distraction osteogenesis (ADO) is not possible. In these severe cases, a two-stage treatment protocol is suggested: onlay bone grafting followed by ADO. An iliac crest onlay bone graft followed by ADO was performed in 13 patients: seven in the mandible and six in the maxilla. Following ADO, endosseous implants and prosthetic restorations were placed. In all cases, the onlay bone graft resulted in inadequate height for implant placement, but allowed ADO to be performed. ADO was performed to a mean total vertical augmentation of 13.7mm. Fifty-two endosseous implants were placed. During a mean follow-up of 4.85 years, two implants failed, both during the first 6 months; the survival rate was 96.15%. In severe cases lacking the required bone for ADO, using an onlay bone graft as a first stage treatment increases the bone height thus allowing ADO to be performed. This article describes a safe and stable two-stage treatment modality for severely atrophic cases, resulting in sufficient bone for implant placement and correction of the inter-maxillary vertical relationship.