Orthodontic bracket designs and their impact on microbial profile and periodontal disease: A clinical trial

A Quantitative Evaluation of the Effectiveness of the Metal Artifact Reduction Algorithm in Cone Beam Computed Tomographic Images with Stainless Steel Orthodontic Brackets and Arch Wires: An Ex Vivo Study

The presence of high-density and high-atomic number materials results in the generation of artifacts in cone beam computed tomographic (CBCT) images. To minimize artifacts in CBCT images, the metal artifact reduction (MAR) tool was developed. This study aims to quantitatively evaluate the effectiveness of the MAR algorithm in CBCT images of teeth with stainless steel orthodontic brackets with or without arch wires in buccal and lingual positions obtained using the Galileos Sirona CBCT scanner. In this in vitro study, 20 stainless steel brackets were attached to the maxillary dentition from the right second premolar to the left second premolar teeth of a human skull. In the first group, 10 brackets were bonded to the buccal surface, and in the second group, 10 brackets were bonded to the palatal surface of these teeth. CBCT scans were obtained for each group with or without orthodontic stainless steel wires using a Galileos Sirona CBCT scanner with exposure parameters of 85 kVp and 21 mAs. CBCT images were obtained two times with and two times without MAR activation. The DICOM format of the CBCT images was imported to ImageJ software (version 1.54), and the contrast-to-noise ratio (CNR) was calculated and compared for each bracket in 15 and 20 mm distances and 20, 40, and 90 degrees on each side. Statistical analysis was performed using the t test (α = 0.05). CNR values of different distances and different teeth were not significantly different between the two MAR modes (p > 0.05). MAR activation had a significant impact in increasing CNR and reducing artifacts only when brackets were in palatal (p = 0.03). In the other bracket and wire positions, the effect of the MAR algorithm on CNR was not significant (p > 0.05). In conclusion, MAR activation significantly increased CNR, but only when the brackets were in a palatal position. In the other bracket and wire positions, the effect of the MAR algorithm is not significant.

The orthodontic treatment and the periodontal status of patients

OBJECTIVE

Aim: To review and analyze modern professional literature on the impact of orthodontic treatment of maxillofacial anomalies on the periodontal status of patients, in particular, the subsiqent pathogenetic mechanisms of the development of periodontal diseases in this category of patients.

PATIENTS AND METHODS

Materials and Methods: Bibliometric and analytical methods were used data from international scientific sources in the field of studying the impact of orthodontic treatment on the state of periodontal tissues were used. Conclusions: Patients undergoing orthodontic treatment need the increased attention to the state of periodontal tissues and regular high-quality both professional and individual oral hygiene. A comprehensive approach to treatment and preventive measures for periodontal diseases, taking into account all pathogenetic links of their development in this category of patients, aims not only to keep the periodontium healthy, but also to ensure successful completion of orthodontic treatment. Taking into account consideration the periodontal status of patients allows individual correction of the treatment plan to increase its clinical effectiveness both in the early and in the long term.

Associations between Oral Health and Cannabis Use among Adolescents and Young Adults: Implications for Orthodontists

Cannabis use is prevalent among adolescents and young adults in the US. Virtually all modes of cannabis consumption involve the oral cavity, and previous studies have linked cannabis use with poorer oral health. We sought to identify associations between cannabis use and various oral health outcomes and behaviors among individuals 12-25 years of age, and to discuss implications for orthodontists who largely interact with this age group over an extended period of treatment time. We examined data from patient electronic health records (N = 14,657) obtained between 2015 and 2021. Associations between lifetime and current self-reported cannabis use and several oral health outcomes or related behaviors that reflect periodontal health, caries status, oral lesions, and physical integrity of tooth structure and restorations were examined in a bivariable and multivariable manner, controlling for patient age, sex, and self-reported tobacco and alcohol use. Reporting lifetime cannabis use was associated with higher risk for having oral lesions (aPR = 1.41, 95% CI: 1.07-1.85), bruxism (aPR = 1.31, 95% CI: 1.09-1.58), and frequent consumption of sugary beverages and snacks (aPR = 1.27, 95% CI: 1.12-1.41). Reporting current cannabis use was associated with higher risk for oral lesions (aPR = 1.45, 95% CI: 1.03-2.06) and frequent consumption of sugary beverages and snacks (aPR = 1.26, 95% CI: 1.07-1.48). Cannabis users aged 12-25 are at increased risk for bruxism, oral lesions, and frequent consumption of sugary beverages and snacks. Orthodontists and other dental professionals should probe for drug use and be cognizant of increased risk for oral health problems in patients that report actively using cannabis.

Anti-Adherence and Antimicrobial Activities of Silver Nanoparticles against Serotypes C and K of Streptococcus mutans on Orthodontic Appliances

Background and Objectives: Streptococcus mutans (S. mutans) is the main microorganism associated with the presence of dental caries and specific serotypes of this bacteria have been related to several systemic diseases limiting general health. In orthodontics, white spot lesions (WSL), represent a great challenge for clinicians due to the great fluctuation of their prevalence and incidence during conventional orthodontic treatments. Although silver nanoparticles (AgNP) have been demonstrated to have great antimicrobial properties in several microorganisms, including S. mutans bacteria, there is no available information about anti adherence and antimicrobial properties of AgNP exposed to two of the most relevant serotypes of S. mutans adhered on orthodontic materials used for conventional therapeutics. The objective of this study was to determine anti-adherence and antimicrobial levels of AgNP against serotypes c and k of S. mutans on conventional orthodontic appliances. Materials and Methods: An AgNP solution was prepared and characterized using dispersion light scattering (DLS) and transmission electron microscopy (TEM). Antimicrobial and anti-adherence activities of AgNP were determined using minimal inhibitory concentrations (MIC) and bacterial adherence testing against serotypes c and k of S. mutans clinically isolated and confirmed by PCR assay. Results: The prepared AgNP had spherical shapes with a good size distribution (29.3 ± 0.7 nm) with negative and well-defined electrical charges (−36.5 ± 5.7 mV). AgNP had good bacterial growth (55.7 ± 19.3 µg/mL for serotype c, and 111.4 ± 38.6 µg/mL for serotype k) and adherence inhibitions for all bacterial strains and orthodontic wires (p < 0.05). The serotype k showed statistically the highest microbial adherence (p < 0.05). The SS wires promoted more bacterial adhesion (149.0 ± 253.6 UFC/mL × 104) than CuNiTi (3.3 ± 6.0 UFC/mL × 104) and NiTi (101.1 ± 108.5 UFC/mL × 104) arches. SEM analysis suggests CuNiTi wires demonstrated better topographical conditions for bacterial adherence while AFM evaluation determined cell wall irregularities in bacterial cells exposed to AgNP. Conclusions: This study suggests the widespread use of AgNP as a potential anti-adherent and antimicrobial agent for the prevention of WSL during conventional orthodontic therapies and, collaterally, other systemic diseases.

Influence Of Orthodontic Brackets Design And Surface Properties On The Cariogenic Streptococcus mutans Adhesion

Objective

To compare the surface properties of self-ligating metallic (SLM), ceramic esthetic, and conventional metallic (CM) brackets, and evaluate the adhesion of Streptococcus mutans biofilms to their surface, attempting to interpret the correlation between bracket type and enamel demineralization from a microbiological perspective.

Materials and methods

Twenty-two brackets of each group were used. The brackets’ surface roughness was defined and the bacterial adhesion was performed using the strain S. mutans ATCC25175 with 8 h or 24 h of incubation time. The total bacterial adhesion (TBA) of biofilms was assessed using optical density (OD) methodology. To quantify bacteria viability (BV), the colony forming units (CFU) were counted. A scanning electron microscopy (SEM) observation of biofilms was also performed. Results: Ceramic brackets exhibited significantly higher roughness (0.304) compared to CM (0.090) and SLM (0.067) ones (C > CM = SLM). The data obtained with the TBA and BV tests showed that S. mutans biofilm formed on bracket groups exhibited similar results for both incubation periods. From the SEM images it is possible to observe that biofilm structure formed for 24 h was denser than that for 8 h of incubation with significantly more aggregates and cells for three groups.

Conclusion

This in vitro study suggests that despite the higher surface roughness of ceramic brackets, this alone does not influence the adhesion of the S. mutans biofilms.

Clinical relevance

From a microbiological perspective, the bracket's design may be more relevant than its surface roughness with respect to the adhesion of cariogenic bacteria biofilm with potential risk to dental enamel integrity.

Nanomaterials Application in Orthodontics

Nanotechnology has gained importance in recent years due to its ability to enhance material properties, including antimicrobial characteristics. Nanotechnology is applicable in various aspects of orthodontics. This scientific work focuses on the concept of nanotechnology and its applications in the field of orthodontics, including, among others, enhancement of antimicrobial characteristics of orthodontic resins, leading to reduction of enamel demineralization or control of friction force during orthodontic movement. The latter one enables effective orthodontic treatment while using less force. Emphasis is put on antimicrobial and mechanical characteristics of nanomaterials during orthodontic treatment. The manuscript sums up the current knowledge about nanomaterials' influence on orthodontic appliances.

The Effect of Peri-Bracket Excess Adhesive on Shear Bond Strength and Enamel–Adhesive Interface Morphology With Confocal Laser Scanning Microscopy: An In Vitro Comparative Study

Aim:

To evaluate the effect of leaving excess adhesive around orthodontic brackets on the shear bond strength and on the enamel–adhesive interface characteristics.

Materials and Methods:

One hundred forty four human premolars were randomly divided into two groups according to the test performed. For the shear bond strength, 120 teeth were bonded with stainless steel orthodontic brackets using Transbond XT light cure adhesive composites. After positioning the bracket and before light curing, excess adhesive was removed according to the test group: group 1, all excess adhesive was removed (0 mm excess); group 2, 1 mm excess adhesive was left; group 3, 2 mm excess adhesive was left; shear bond strength was measured immediately and after three months of natural aging using a universal testing machine; and adhesive remnant index scores were also evaluated. For the enamel–adhesive interface characteristics, 24 teeth were bonded with stainless steel orthodontic brackets using Transbond XT light cure adhesive composites mixed with Rhodamine B fluorescent dye, excess adhesive was removed in the same manner according to the test groups, and teeth were evaluated using confocal laser scanning microscopy.

Results:

Time did not significantly affect the bond strength results ( P = .888) but the amount of excess adhesive significantly affected the results ( P < .05). Interaction terms were not significant ( P = .337). In both immediate and aged conditions, group 1 (0 mm excess) presented the highest bond strength results (MPa; P < .05). No significant difference was found in adhesive remnant index scores or enamel–adhesive interface characteristics.

Conclusion:

Excess adhesive around orthodontic bracket does not increase shear bond strength.

Prevention and caries risk management in teenage and orthodontic patients

As patients progress from childhood through to teenage years, they progress through periods of high caries risk as they undergo changes in lifestyle and oral microflora. Removable or fixed orthodontic treatment also alters the oral microflora and can dramatically increase caries risk. This paper outlines ways to identify the transition to higher caries risk, and practical ways to lower the risk of hard tissue loss from dental caries during orthodontic treatment across the teenage years, including tooth surface protection, optimised use of mechanical and chemical plaque control, and appropriate delivery of remineralising agents over time.

Clinical and Salivary Findings in Patients with Metal and Crystalline Conventional and Self-Ligating Orthodontic Brackets

Aim

Data regarding different types of orthodontic brackets and ligation and various clinical and salivary findings are scarce. Therefore, the aim of this study was to compare clinical and salivary findings in patients with different types of fixed orthodontic appliances.

Subjects and methods

Decayed, missing and filled teeth index (DMFT) and plaque index, salivary flow rate, salivary pH and prevalence of white spot lesions were determined in 83 patients with different types of orthodontic brackets and ligation (metal passive self-ligating brackets, conventional metal brackets, mono-crystal brackets and polycrystalline active self-ligating brackets), before and six months after the beginning of fixed orthodontic treatment. The patients were recruited in a private dental office, in the period of two years. The group comprised 83 patients (mean age: 15.14 ± 1.66 years), including 52 women (mean age: 15.08 ± 1.68) and 31 men (15.24 ± 1.64). Statistical analysis was performed by use of dependent and independent samples t-test as well as one way ANOVA, Wilcoxon signed rank test and the Kruskal Wallis test. P-values below 0.05 (p<0.05) were considered significant.

Results

DMFT and salivary flow have shown a significant increase, while salivary pH has shown a significant decrease in the observed time interval, in all patients irrespective of type of brackets and ligation. Among patients with different bracket material, no significant differences were found in any of the observed parameters.

Conclusion

Although salivary flow rate is increased in patients with fixed orthodontic appliances which can have caries-protective effect, DMFT also increases and salivary pH decreases six months after the beginning of the treatment independently of bracket material or ligation type. All patients should receive instructions for precise oral hygiene and dietary habits before the beginning of fixed orthodontic therapy and at every dental check-up.

Characterization of the salivary microbiome in patients with pancreatic cancer

Clinical manifestations of pancreatic cancer often do not occur until the cancer has undergone metastasis, resulting in a very low survival rate. In this study, we investigated whether salivary bacterial profiles might provide useful biomarkers for early detection of pancreatic cancer. Using high-throughput sequencing of bacterial small subunit ribosomal RNA (16S rRNA) gene, we characterized the salivary microbiota of patients with pancreatic cancer and compared them to healthy patients and patients with other diseases, including pancreatic disease, non-pancreatic digestive disease/cancer and non-digestive disease/cancer. A total of 146 patients were enrolled at the UCSD Moores Cancer Center where saliva and demographic data were collected from each patient. Of these, we analyzed the salivary microbiome of 108 patients: 8 had been diagnosed with pancreatic cancer, 78 with other diseases and 22 were classified as non-diseased (healthy) controls. Bacterial 16S rRNA sequences were amplified directly from salivary DNA extractions and subjected to high-throughput sequencing (HTS). Several bacterial genera differed in abundance in patients with pancreatic cancer. We found a significantly higher ratio of Leptotrichia to Porphyromonas in the saliva of patients with pancreatic cancer than in the saliva of healthy patients or those with other disease (Kruskal–Wallis Test; P < 0.001). Leptotrichia abundances were confirmed using real-time qPCR with Leptotrichia specific primers. Similar to previous studies, we found lower relative abundances of Neisseria and Aggregatibacter in the saliva of pancreatic cancer patients, though these results were not significant at the P < 0.05 level (K–W Test; P = 0.07 and P = 0.09 respectively). However, the relative abundances of other previously identified bacterial biomarkers, e.g., Streptococcus mitis and Granulicatella adiacens, were not significantly different in the saliva of pancreatic cancer patients. Overall, this study supports the hypothesis that bacteria abundance profiles in saliva are useful biomarkers for pancreatic cancer though much larger patient studies are needed to verify their predictive utility.