The effect of various nanoparticle coating on the frictional resistance at orthodontic wire and bracket interface: A systematic review

The effect of salbutamol sulphate inhalation (an anti-asthmatic medication) on the surfaces of orthodontic Archwires

OBJECTIVES

This study aimed to compare the surface roughness and friction of different orthodontic archwires after exposure to salbutamol sulphate inhalation, an anti-asthmatic medication.

METHODS

Orthodontic archwires (stainless-steel [StSt], nickel-titanium [NiTi], beta-titanium [β-Ti], and copper-NiTi [Cu-NiTi]) were equally divided into two groups. The exposed groups were subjected to 20 mg salbutamol sulphate for 21 days and kept in artificial saliva. The control groups were only kept in artificial saliva. Surface changes were visualized using scanning electron microscopy (SEM). The average surface roughness (Ra) was evaluated using atomic force microscopy (AFM), and friction resistance forces were assessed using a universal testing machine. Statistical analyses were performed using t-tests and ANOVA followed by post hoc tests.

RESULTS

Salbutamol sulphate did not change the surface roughness of StSt and NiTi archwires (p > .05). However, the change in the surfaces of β-Ti and Cu-NiTi archwires was significant (p < .001). The frictional forces of exposed StSt, NiTi, and Cu-NiTi archwires did not change (p > .05). However, the frictional forces of β-Ti archwires increased significantly after exposure to salbutamol sulphate (p = .021). Brushing with fluoride after exposure to salbutamol sulphate increased the frictional forces of β-Ti only (p = .002).

CONCLUSIONS

Salbutamol sulphate inhalation significantly affected the surface texture of β-Ti and Cu-NiTi orthodontic archwires and increased the friction of β-Ti archwires. These deteriorating effects were not detected on the surface of StSt and NiTi archwires. Therefore, we suggest that β-Ti and copper titanium archwires should be used cautiously in individuals under salbutamol sulphate inhalation treatment.

Graphene-Based Coatings for Surface Modification and Their Applications in Fixed Orthodontics: A Scoping Review

BACKGROUND

Surface coating technology can assist fixed appliances by reducing friction, improving antibacterial characteristics, and increasing corrosion resistance. The application of functional coatings composed of graphene onto the surfaces of orthodontic brackets and archwires has been shown to enhance their mechanical qualities. The objective of the current study was to carry out a scoping analysis of published recent evidence on the utilization of graphene as a covering material in metallic orthodontic accessories, such as brackets and archwires; Methods: A scoping review was undertaken following the PRISMA-ScR guidelines. PubMed, Embase, the Cochrane Library, Dentistry and Oral Science Source, and Google Scholar were searched between 2003 and 2023; Results: In total, 38 potential references were detected, from which 10 were selected for this review. These articles addressed the benefits of the application of graphene-oxide functional coatings onto the surface of archwires and brackets during fixed orthodontic treatment. Orthodontic graphene-oxide-based coatings provide improved surface characteristics (e.g., reduced friction and anticorrosive effects), antibacterial capabilities, and biocompatibility. These characteristics can increase the effectiveness of orthodontic therapy, improve patient comfort, and lower the likelihood of problems; Conclusion: Orthodontists should be aware of and comprehend the prerequisites for using graphene-oxide-coated archwires and brackets to fulfill needs throughout their clinical practice.

Static friction, surface roughness, and antibacterial activity of orthodontic brackets coated with silver and silver chitosan nanoparticles

BACKGROUND

To determine the effect of silver and silver chitosan nanocoatings on monocrystalline ceramic, polycrystalline ceramic, and metallic brackets regarding friction, roughness, and antibacterial effect against Streptococcus mutans.

METHODS

A total of 99 upper right premolar brackets with a 0.022 × 0.025 -inch slot were divided into three groups, each 33 according to coating material; the non-coated group, silver nanoparticles (AgNPs), and silver chitosan nanoparticles (Ag-CsNPs) groups. Each group was equally subdivided into the following three subgroups regarding bracket materials: monocrystalline ceramic, polycrystalline ceramic, and metallic brackets. A universal testing machine determined static friction on a custom-made acrylic jig. Then a profilometer machine was used to collect roughness data, and finally, the anti-cariogenic effect was measured with the disc diffusion technique's "minimum zone of inhibition" against Streptococcus mutans. Two-way ANOVA was used to compare data between groups and subgroups, followed by the Bonferroni test for multiple pair-wise comparisons.

RESULTS

The nanocoating effect on ceramic brackets' static friction was non-significant. The AgNPs and Ag-CsNPs coated metallic group revealed a significant increase in static friction-a significant effect of the nanocoating in the surface roughness of monocrystalline and polycrystalline ceramic brackets. A significant favorable effect of AgNPs and Ag-CsNPs against Streptococcus mutans was observed.

CONCLUSIONS

AgNPs and Ag-CsNPs coats are unsuitable for decreasing friction in metallic brackets or improving roughness in polycrystalline ceramic brackets. Nano coating can improve roughness in monocrystalline ceramic brackets. Coating brackets with AgNPs and Ag-CsNPs has a tremendous antibacterial effect on Streptococcus mutans, a substantial factor in the incidence of dental caries.