Bismuth compounds in medicinal chemistry

Facile synthesis and antifungal evaluation of hypervalent organoantimony(III) and organobismuth(III) thioates with tridentate C,N,C-coordinating ligands

In the present work, a series of organometallic thioates bearing a 5,6,7,12-tetrahydrodibenzo[c,f][1,5]azastibocine or -azabismocine framework were synthesized through the cross-coupling reactions of the corresponding halide precursors with thiols and disulfides at room temperature. The former transformation can be achieved under additive-free conditions, and mild dithiothreitol (DTT) is the only additive in the latter. Both methods feature simple operation, a broad substrate scope, and good reaction yields. Antifungal assays showed that the synthesized organobismuth(III) thioates possess significantly higher antibiotic activity against Candida albicans than clinical fluconazole, while the inhibitory effects of Sb-sulfenylated products are low to negligible. Furthermore, the antibiofilm potential of such Bi-S bond-containing compounds was discovered as well.

Fusing Bismuth and Mercaptocarboranes: Design and Biological Evaluation of Low-Toxicity Antimicrobial Thiolato Complexes

This study proposes an innovative strategy to enhance the pharmacophore model of antimicrobial bismuth thiolato complex drugs by substituting hydrocarbon ligand structures with boron clusters, particularly icosahedral closo-dicarbadodecaborane (C2B10H12, carboranes). The hetero- and homoleptic mercaptocarborane complexes BiPh2L (1) and BiL3 (2) (L=9-S-1,2-C2B10H11) were prepared from 9-mercaptocarborane (HL) and triphenylbismuth. Comprehensive characterization using NMR, IR, MS, and XRD techniques confirmed their successful synthesis. Evaluation of antimicrobial activity in a liquid broth microdilution assay demonstrated micromolar to submicromolar minimum inhibitory concentrations (MIC) suggesting high effectiveness against S. aureus and limited efficacy against E. coli. This study highlights the potential of boron-containing bismuth complexes as promising antimicrobial agents, especially targeting Gram-positive bacteria, thus contributing to the advancement of novel therapeutic approaches.

The comprehensive review about elements accumulation in industrial hemp (Cannabis sativa L.)

Cannabis sativa L., commonly known as industrial hemp, is a versatile plant with applications ranging from medicinal to agricultural and industrial uses. Despite its benefits, there is a notable gap in regulatory toxicology, in understanding the extent of element accumulation in hemp, which is critical due to its ability to absorb various elements from the soil, including heavy metals (Pb, Cd, Hg, and As), uptakes potential toxic elements (e.g., Sb, Sn, Sr, Bi, Tl), problematic elements (Ni, Cr, Co), and essential elements (Zn, Cu, Fe, Mn). The paper aims to enrich current understandings by offering a comprehensive analysis of elements absorption in industrial hemp. This study emphasizes the potential health risks linked with hemp consumption including regulatory toxicology aspects: limits, Permitted Daily Exposures (PDE), recommendations in different countries and from different agencies/bodies (like the WHO and the EU) based on route of administration, jurisdiction and actual literature review. This review contributes significantly to the knowledge base on hemp safety, serving as a valuable resource for researchers, regulatory bodies, and industry stakeholders.

Bioactive Bismuth Compounds: Is Their Toxicity a Barrier to Therapeutic Use?

Bismuth compounds are considered relatively non-toxic, with their low solubility in aqueous solutions (e.g., biological fluids) being the major contributing factor to this property. Bismuth derivatives are widely used for the treatment of peptic ulcers, functional dyspepsia, and chronic gastritis. Moreover, the properties of bismuth compounds have also been extensively explored in two main fields of action: antimicrobial and anticancer. Despite the clinical interest of bismuth-based drugs, several side effects have also been reported. In fact, excessive acute ingestion of bismuth, or abuse for an extended period of time, can lead to toxicity. However, evidence has demonstrated that the discontinuation of these compounds usually reverses their toxic effects. Notwithstanding, the continuously growing use of bismuth products suggests that it is indeed part of our environment and our daily lives, which urges a more in-depth review and investigation into its possible undesired activities. Therefore, this review aims to update the pharmaco-toxicological properties of bismuth compounds. A special focus will be given to in vitro, in vivo, and clinical studies exploring their toxicity.

Bismuth-based two-dimensional nanomaterials for cancer diagnosis and treatment

The intrinsic high X-ray attenuation and insignificant biological toxicity of Bi-based nanomaterials make them a category of advanced materials in oncology. Bi-based two-dimensional nanomaterials have gained rapid development in cancer diagnosis and treatment owing to their adjustable bandgap structure, high specific surface area and strong NIR absorption. In addition to the single functional cancer diagnosis and treatment modalities, Bi-based two-dimensional nanomaterials have been certified for accomplishing multi-imaging guided multifunctional synergistic cancer therapies. In this review, we summarize the recent progress including controllable synthesis, defect engineering and surface modifications of Bi-based two-dimensional nanomaterials for cancer diagnosis and treatment in the past ten years. Their medical applications in cancer imaging and therapies are also presented. Finally, we discuss the potential challenges and future research priorities of Bi-based two-dimensional nanomaterials.

Chemistry of two-dimensional pnictogens: emerging post-graphene materials for advanced applications

The layered allotropes of group 15 (P, As, Sb and Bi), also called two-dimensional (2D) pnictogens, have emerged as one of the most promising families of post-graphene 2D-materials. This is mainly due to the great variety of properties they exhibit, including layer-dependent bandgap, high charge-carrier mobility and current on/off ratios, strong spin-orbit coupling, wide allotropic diversity and pronounced chemical reactivity. These are key ingredients for exciting applications in (opto)electronics, heterogeneous catalysis, nanomedicine or energy storage and conversion, to name a few. However, there are still many challenges to overcome in order to fully understand their properties and bring them to real applications. As a matter of fact, due to their strong interlayer interactions, the mechanical exfoliation (top-down) of heavy pnictogens (Sb & Bi) is unsatisfactory, requiring the development of new methodologies for the isolation of single layers and the scalable production of high-quality flakes. Moreover, due to their pronounced chemical reactivity, it is necessary to develop passivation strategies, thus preventing environmental degradation, as in the case of bP, or controlling surface oxidation, with the corresponding modification of the interfacial and electronic properties. In this Feature Article we will discuss, among others, the most important contributions carried out in our group, including new liquid phase exfoliation (LPE) processes, bottom-up colloidal approaches, the preparation of intercalation compounds, innovative non-covalent and covalent functionalization protocols or novel concepts for potential applications in catalysis, electronics, photonics, biomedicine or energy storage and conversion. The past years have seen the birth of the chemistry of pnictogens at the nanoscale, and this review intends to highlight the importance of the chemical approach in the successful development of routes to synthesise, passivate, modify, or process these materials, paving the way for their use in applications of great societal impact.

Quantum Dynamics and Bi Metal Force Field Parameterization Yielding Significant Antileishmanial Targets

Amid emerging drug resistance to metal inhibitors, high toxicity, and onerous drug delivery procedures, the computational design of alternate formulations encompassing functional metal-containing compounds greatly relies on large-scale atomistic simulations. Simulations particularly with Au(I), Ag, Bi(V), and Sb(V) pose a major challenge to elucidate their molecular mechanism due to the absence of force field parameters. This study thus quantum mechanically derives force field parameters of Bi(V) as an extension of the previous experimental study conducted on heteroleptic triorganobismuth(V) biscarboxylates of type [BiR3(O2CR')2]. We have modeled two organo-bismuth(V) carboxylates, which are optimized and parameterized along with the famous pentavalent antimonial drug: meglumine antimoniate using quantum mechanics original Seminarian methods with the SBKJC effective core potential (ECP) basis set. Furthermore, molecular dynamics (MD) simulations of bismuth- and antimony-containing compounds in complex with two enzymes, trypanothione synthetase-amidase (TSA) and trypanothione reductase, are performed to target the (T(SH)2) pathway at multiple points. MD simulations provide novel insights into the binding mechanism of TSA and highlight the role of a single residue Arg569 in modulating the ligand dynamics. Moreover, the presence of an ortho group in a ligand is emphasized to facilitate interactions between Arg569 and the active site residue Arg313 for higher inhibitory activity of TSA. This preliminary generation of parameters specific to bismuth validated by simulations in replica will become a preamble of future computational and experimental research work to open avenues for newer and suitable drug targets.

Bismuth Vanadate (BiVO4) Nanostructures: Eco-Friendly Synthesis and Their Photocatalytic Applications

Green nanotechnology plays an important role in designing environmentally-benign and sustainable synthesis techniques to provide safer products for human health and environments. In this context, the synthesis of bismuth vanadate (BiVO4) nanoparticles (NPs) based on green chemistry principles with the advantages of eco-friendliness, cost-effectiveness, and simplicity has been explored by researchers. Despite the advantages of these synthesis techniques, crucial aspects regarding their repeatability and large-scale production still need to be comprehensively explored. BiVO4 NPs have shown excellent potential in the pharmaceutical industry, cancer therapy, and photocatalysis. BiVO4 particles with monoclinic scheelite structures have been widely investigated for their environmental applications owing to their fascinating optical and electrical properties as well as their high stability and unique crystal structure properties. These NPs with good photostability and resistance to photocorrosion can be considered as promising nanophotocatalysts for degradation of pollutants including organic dyes and pharmaceutical wastes. However, additional explorations should be moved toward the optimization of reaction/synthesis conditions and associated photocatalytic mechanisms. Herein, recent developments regarding the environmentally-benign fabrication of BiVO4 NPs and their photocatalytic degradation of pollutants are deliberated, with a focus on challenges and future directions.

Synthesis, characterization, and biological properties of mono-, di- and poly-nuclear bismuth(III) halide complexes containing thiophene-2-carbaldehyde thiosemicarbazones

In order to investigate the coordination chemistry and pharmacological applications of bismuth compounds, a series of new bismuth(III) halide thiosemicarbazone complexes were synthesized. The reactions of thiophene-2-carbaldehyde-N-substituted thiosemicarbazones with bismuth(III) halides resulted in the formation of the {[[BiCl₂(η¹-S-Httsc)₄]⁺.Cl^-][BiCl₂(μ₂-Cl)(η¹-S-Httsc)₂]₂} (1), {[BiCl₃(η¹-S-Htmtsc)₃].CH₃OH} (2), {[BiCl₃(η¹-S-Htetsc)₃].CH₃OH} (3), {[BiBr₂(μ₂-Br)(η¹-S-Httsc)₂]₂.CH₃OH} (4), {[BiBr₂(μ₂-Br)(η¹-S-Htmtsc)₂]_n} (5), and {[BiI₂(μ₂-I)(η¹-S-Httsc)₂]₂} (6) complexes (Httsc: thiophene-2-carbaldehyde thiosemicarbazone, Htmtsc: thiophene-2-carbaldehyde-N-methyl thiosemicarbazone, Htetsc: thiophene-2-carbaldehyde-N-ethyl thiosemicarbazone). The complexes were characterized by a number of different spectroscopic techniques and the crystal structures of all bismuth(III) complexes (1-6) were determined by using single crystal X-ray diffraction study. In addition, the thermal stability of the complexes was compared using Thermogravimetric-differential thermal analysis. Crystal structures of the two free ligands, thiophene-2-carbaldehyde-N-methyl-thiosemicarbazone and thiophene-2-carbaldehyde-N-ethyl-thiosemicarbazone, were also determined by using single crystal X-ray diffraction analysis. The Hirshfeld surface of the bismuth(III) complexes and free ligands were additionally analyzed to verify the intermolecular interactions. Biological studies showed that all six bismuth(III) thiosemicarbazone complexes (1-6) exhibited biological activities against selected bacteria and the human breast adenocarcinoma (MCF-7) cell line.

Rare-earth doped BiFe0.95Mn0.05O3 nanoparticles for potential hyperthermia applications

Ionic engineering is exploited to substitute Bi cations in BiFe0.95Mn0.05O3 NPs (BFM) with rare-earth (RE) elements (Nd, Gd, and Dy). The sol-gel synthesized RE-NPs are tested for their magnetic hyperthermia potential. RE-dopants alter the morphology of BFM NPs from elliptical to rectangular to irregular hexagonal for Nd, Gd, and Dy doping, respectively. The RE-BFM NPs are ferroelectric and show larger piezoresponse than the pristine BFO NPs. There is an increase of the maximum magnetization at 300 K of BFM up to 550% by introducing Gd. In hyperthermia tests, 3 mg/ml dispersion of NPs in water and agar could increase the temperature of the dispersion up to ∼39°C under an applied AC magnetic field of 80 mT. Although Gd doping generates the highest increment in magnetization of BFM NPs, the Dy-BFM NPs show the best hyperthermia results. These findings show that RE-doped BFO NPs are promising for hyperthermia and other biomedical applications.

Building a Green, Robust, and Efficient Bi-MOF Heterogeneous Catalyst for the Strecker Reaction of Ketones

In this work, we present the new [Bi₁₄(μ₃-O)₉(μ₄-O)₂(μ_3–OH)₅(3,5-DSB)₅(H₂O)₃]·7H₂O, BiPF-4 (bismuth polymeric framework—4) MOF, its microwave hydrothermal synthesis, as well as its behavior as a heterogeneous catalyst in the multicomponent organic Strecker reaction. The BiPF-4 material shows a three-dimensional (3D) framework formed by peculiar inorganic oxo-hydroxo-bismutate layers connected among them through the 3,5-dsb (3,5-disulfobenzoic acid) linker. These two-dimensional (2D) layers, built by junctions of Bi7 polyhedra SBU, provide the material of many Lewis acid catalytic sites because of the mixing in the metal coordination number. BiPF-4 is a highly robust, green, and stable material that demonstrates an excellent heterogeneous catalytic activity in the multicomponent Strecker reaction of ketones carried out in one-pot synthesis, bringing a reliable platform of novel green materials based on nontoxic and abundant metal sources such as bismuth.

In this work, we present the new [Bi₁₄(μ₃-O)₉(μ₄-O)₂(μ₃₋OH)₅(3,5-DSB)₅(H₂O)₃]·7H₂O, BiPF-4 (bismuth polymeric framework—4) MOF, its microwave hydrothermal synthesis, as well as its behavior as a heterogeneous catalyst in the multicomponent organic Strecker reaction.

Clinically used antifungal azoles as ligands for gold(III) complexes: the influence of the Au(III) ion on the antimicrobial activity of the complex

In a search for novel antimicrobial metal-based therapeutic agents, mononuclear gold(III) complexes 1-7 of the general formula [AuCl₃(azole)], where azole stands for imidazole (im, 1), 1-isopropylimidazole (ipim, 2), 1-phenylimidazole (phim, 3), clotrimazole (ctz, 4), econazole (ecz, 5), tioconazole (tcz, 6) and voriconazole (vcz, 7) were synthesized, characterized and biologically evaluated. In all complexes, the corresponding azole ligand is monodentately coordinated to the Au(III) via the imidazole or triazole nitrogen atom, while the remaining coordination sites are occupied by chloride anions leading to the square-planar arrangement. In vitro antimicrobial assays showed that the complexation of inactive azoles, imidazole, 1-isopropylimidazole and 1-phenylimidazole, to the Au(III) ion led to complexes 1-3, respectively, with moderate activity against the investigated strains and low cytotoxicity on the human normal lung fibroblast cell line (MRC-5). Moreover, gold(III) complexes 4-7 with clinically used antifungal agents clotrimazole, econazole, tioconazole and voriconazole, respectively, have, in most cases, enhanced antimicrobial effectiveness relative to the corresponding azoles, with the best improvement achieved after complexation of tioconazole (6) and voriconazole (7). The complexes 4-7 and the corresponding antifungal azoles inhibited the growth of dermatophyte Microsporum canis at 50 and 25 μg mL^-1. Gold(III) complexes 1-3 significantly reduced the amount of ergosterol in the cell membrane of Candida albicans at the subinhibitory concentration of 0.5 × MIC (minimal inhibitory concentration), while the corresponding imidazole ligands did not significantly affect the ergosterol content, indicating that the mechanism of action of the gold(III)-azole complexes is associated with inhibition of ergosterol biosynthesis. Finally, complexes 5 and 6 significantly reduced the production of pyocyanin, a virulence factor in Pseudomonas aeruginosa controlled by quorum sensing, and increased cell survival after exposure to this bacterium. These findings could be of importance for the development of novel gold(III)-based antivirulence therapeutic agents that attenuate virulence without pronounced effect on the growth of the pathogens, offering a lower risk for resistance development.

Expression, Purification, and Comparative Inhibition of Helicobacter pylori Urease by Regio-Selectively Alkylated Benzimidazole 2-Thione Derivatives

The urease enzyme has been an important target for the discovery of effective pharmacological and agricultural products. Thirteen regio-selectively alkylated benzimidazole-2-thione derivatives have been designed to carry the essential features of urease inhibitors. The urease enzyme was isolated from Helicobacter pylori as a recombinant urease utilizing the His-tag method. The isolated enzyme was purified and characterized using chromatographic and FPLC techniques showing a maximal activity of 200 mg/mL. Additionally, the commercial Jack bean urease was purchased and included in this study for comparative and mechanistic investigations. The designed compounds were synthesized and screened for their inhibitory activity against the two ureases. Compound 2 inhibited H. pylori and Jack bean ureases with IC₅₀ values of 0.11; and 0.26 mM; respectively. While compound 5 showed IC₅₀ values of 0.01; and 0.29 mM; respectively. Compounds 2 and 5 were docked against Helicobacter pylori urease (PDB ID: 1E9Y; resolution: 3.00 Å) and exhibited correct binding modes with free energy (ΔG) values of −9.74 and −13.82 kcal mol⁻¹; respectively. Further; the in silico ADMET and toxicity properties of 2 and 5 indicated their general safeties and likeness to be used as drugs. Finally, the compounds’ safety was authenticated by an in vitro cytotoxicity assay against fibroblast cells.

Photoelectron Spectroscopy of Size-Selected Bismuth-Boron Clusters: BiBn- (n = 6-8)

Because of its low toxicity, bismuth is considered to be a "green metal" and has received increasing attention in chemistry and materials science. To understand the chemical bonding of bismuth, here we report a joint experimental and theoretical study on a series of bismuth-doped boron clusters, BiB_n^- (n = 6-8). Well-resolved photoelectron spectra are obtained and are used to understand the structures and bonding of BiB_n^- in conjunction with theoretical calculations. Global minimum searches find that all three BiB_n^- clusters have planar structures with the Bi atom bonded to the edge of the planar B_n moiety via two Bi-B σ bonds as well as π bonding by the 6p_z orbital. BiB₆^- is found to consist of a double-chain B₆ with a terminal Bi atom. Both BiB₇^- and BiB₈^- are composed of a Bi atom bonded to the planar global minima of the B₇^- and B₈^- clusters. Chemical bonding analyses reveal that BiB₆^- is doubly antiaromatic, whereas BiB₇^- and BiB₈^- are doubly aromatic. In the neutral BiB_n (n = 6-8) clusters, except BiB₆ which has a planar structure similar to the anion, the global minima of both BiB₇ and BiB₈ are found to be half-sandwich-type structures due to the high stability of the doubly aromatic B₇^3- and B₈^2- molecular wheel ligands.

Copper-Promoted N-Arylation of the Imidazole Side Chain of Protected Histidine by Using Triarylbismuth Reagents

The N-arylation of the side chain of histidine by using triarylbismuthines is reported. The reaction is promoted by copper(II) acetate in dichloromethane at 40 °C under oxygen in the presence of diisopropylethylamine and 1,10-phenanthroline and allows the transfer of aryl groups with substituents at any position of the aromatic ring. The reaction shows excellent functional group tolerance and is applicable to dipeptides where the histidine is located at the N terminus. A histidine-guided backbone N-H arylation was observed in dipeptides where the histidine occupies the C terminus.

Systematic Review and Meta-Analyses Assessment of the Clinical Efficacy of Bismuth Subsalicylate for Prevention and Treatment of Infectious Diarrhea

BACKGROUND

A large number of studies have evaluated the pharmacology, safety, and/or efficacy of bismuth subsalicylate for the relief of common gastrointestinal symptoms, diarrhea and vomiting due to acute gastroenteritis. In addition, short-term (48 h) medication with bismuth subsalicylate is known to be effective against infectious gastroenteritis such as travelers' diarrhea.

AIMS

Previous studies have documented the bacteriostatic/bactericidal effects of bismuth subsalicylate against a variety of pathogenic gastrointestinal bacteria. However, meta-analyses of the clinical efficacy of bismuth subsalicylate for both prevention and treatment of travelers' diarrhea have not yet been published.

METHODS

A total of 14 clinical studies (from 1970s to 2007) comprised the core data used in this assessment of efficacy of bismuth subsalicylate against infectious (including travelers') diarrhea. These studies allowed for statistical meta-analyses regarding prevention (three travelers' diarrhea studies) and treatment of infectious diarrhea (11 studies [five travelers' diarrhea]).

RESULTS

The results show that subjects treated with bismuth subsalicylate for up to 21 days have 3.5 times greater odds of preventing travelers' diarrhea compared with placebo (95% CI 2.1, 5.9; p < 0.001). In addition, subjects with infectious diarrhea treated with bismuth subsalicylate had 3.7 times greater odds of diarrhea relief (recorded on diaries as subjective symptomatic improvement) compared to those receiving placebo (95% CI 2.1, 6.3; p < 0.001).

CONCLUSIONS

This systematic review and meta-analysis suggests that bismuth subsalicylate can be beneficial for those at risk or affected by food and waterborne diarrheal disease such as traveler's (infectious) diarrhea, and may decrease the risk of inappropriate antibiotic utilization.

Bismuth subsalicylate incorporated in polycaprolactone-gelatin membranes by electrospinning to prevent bacterial colonization

Periodontitis is a chronic, multifactorial, inflammatory disease characterized by the progressive destruction of the periodontal tissues. Guided tissue regeneration (GTR), involving the use of barrier membranes, is one of the most successful clinical procedures for periodontal therapy. Nevertheless, rapid degradation of the membranes and membrane-related infections are considered two of the major reasons for GTR clinical failure. Recently, integration of non-antibiotic, antimicrobial materials to the membranes has emerged as a novel strategy to face the bacterial infection challenge, without increasing bacterial resistance. In this sense, bismuth subsalicylate (BSS) is a non-antibiotic, metal-based antimicrobial agent effective against different bacterial strains, that has been long safely used in medical treatments. Thus, the aim of the present work was to fabricate fibrillar, non-rapidly bioresorbable, antibacterial GTR membranes composed of polycaprolactone (PCL), gelatin (Gel), and BSS as the antibacterial agent. PCL-G-BSS membranes with three different BSS concentrations (2 wt./v%, 4 wt./v%, and 6 wt./v%) were developed by electrospinning and their morphology, composition, water wettability, mechanical properties, Bi release and degradation rate were characterized. The Cytotoxicity of the membranes was studiedin vitrousing human osteoblasts (hFOB) and gingival fibroblasts (HGF-1), and their antibacterial activity was tested againstAggregatibacter actinomycetemcomitans, Escherichia coli, Porphyromonas gingivalisandStaphylococcus aureus.The membranes obtained exhibited adequate mechanical properties for clinical application, and appropriate degradation rates for allowing periodontal defects regeneration. The hFOB and HGF-1 cells displayed adequate viability when in contact with the lixiviated products from the membranes, and, in general, displayed antibacterial activity against the four bacteria strains tested. Thus, the PCL-G-BSS membranes showed to be appropriate as potential barrier membranes for periodontal GTR treatments.

Structurally restricted Bi(III) metallation of apo-βMT1a: metal-induced tangling

Non-toxic bismuth salts are used in anti-ulcer medications and to protect against nephrotoxicity from anticancer drugs. Bismuth salts also induce metallothionein (MT), a metal-binding protein that lacks a formal secondary structure. We report the impact on the metallation properties of Bi(III) to the 9-cysteine β fragment of MT as a function of cysteine accessibility using electrospray ionization mass spectrometry. At pH 7.4, Bi2βMT formed cooperatively. Cysteine modification shows that each Bi(III) was terminally bound to three cysteinyl thiolates. Non-cooperative Bi(III) binding was observed at pH 2.3, where cysteine accessibility is increased. However, competition from H4EDTA inhibited Bi(III) binding. When GdmCl, a well-known denaturing agent, was used to increase cysteine accessibility of the apoβMT at pH 7.4, a greater fraction of Bi3βMT formed using all nine cysteines. The change in binding profile and equilibrium of Bi2βMT was determined as a function of acidification, which changed as a result of competition with H4EDTA. There was no Bi(III) transfer between Bi2βMT, Cd3βMT, and Zn3βMT. This lack of metal exchange and the resistance towards binding the third Bi(III) suggest a rigidity in the Bi2βMT binding sites that inhibits Bi(III) mobility. These experiments emphasize the conformational control of metallation that results in substantially different metallated products: at pH 7.4 (many cysteines buried) Bi2βMT, whereas at pH 7.4 (all cysteines accessible) enhanced formation of Bi3βMT. These data suggest that the addition of the first two Bi(III) crosslinks the protein, blocking access to the remaining three cysteines for the third Bi(III), as a result of tangle formation.

Bismuth oxide nanoparticles as agents of radiation dose enhancement in intraoperative radiotherapy

PURPOSE

Intraoperative radiotherapy (IORT) technique is an advanced radio therapeutic method used for delivery of a single high-dose radiation during surgery while removing healthy tissues from the radiation field. Nowadays, growing attention is being paid to IORT for its low-energy (kilovoltage) delivery as it requires less radiation protection, but suffers several disadvantages, including high-dose delivery and prolonged treatment time. The application of nanoparticles with high atomic number and high attenuation coefficients in kilovoltage energy may help overcome the mentioned shortcomings. This study was designed to investigate and quantify the mean dose enhancement factor (DEF) in the presence of nanoparticles using IORT method.

METHODS

Bismuth oxide nanoparticles (Bi₂ O₃ NPs), both in sheet and spherical formats, were synthesized using a novel hydrothermal method and characterized with x-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis. Genipin-gelatin gel dosimeter (GENIPIN) was produced in three batches of pure with sheet and with spherical nanoparticles in concentration of 46.596 µg/ml, and irradiated with 50 kV x-rays.

RESULTS

Samples were scanned by a spectrophotometer, which indicated a DEF of 3.28  ±  0.37 and 2.50  ±  0.23 for sheet and spherical NPs, respectively. According to the results of this study, GENIPIN is a suitable dosimeter for the evaluation of three-dimensional dose distribution in the presence Bi₂ O₃ NPs.

CONCLUSION

As a result, IORT along with Bi₂ O₃ NPs has the potential to reduce treatment time and/or normal tissue dose; moreover, it could provide localized dose enhancement.

BiCl3-Facilitated removal of methoxymethyl-ether/ester derivatives and DFT study of –O–C–O– bond cleavage

An experimental and DFT study of the cleavage of the MOM group mediated by an eco-friendly reagent, bismuth trichloride.

Structural Insights into New Bi(III) Coordination Polymers with Pyridine-2,3-Dicarboxylic Acid: Photoluminescence Properties and Anti-Helicobacter pylori Activity

Two novel coordination polymers, [Bi2(2,3pydc)2(2,3pydcH)2(H2O)]n (1) and {(Et3NH)2[Bi(2,3pydc)(2,3pydcH)Cl2]}n (2) were prepared using as a prolinker pyridine-2,3-dicarboxylic acid (2,3pydcH2). The obtained complexes were fully characterized by elemental analysis, TG/DTG, FT-IR, solid-state photoluminescence, DFT calculations and single-crystal X-ray diffraction. The obtained complexes crystallized in the triclinic P-1 space group (1) and comprise dimeric units with two crystallographically different Bi(III) centers (polyhedra: distorted pentagonal bipyramid and bicapped trigonal prism) and monoclinic P21/c space group (2) with a distorted monocapped pentagonal bipyramid of Bi(III) center. The various coordination modes of bridging carboxylate ligands are responsible for the formation of 1D chains with 4,5C10 (1) and 2C1 (2) topology. The photoluminescence quantum yield for polymer 2 is 8.36%, which makes it a good candidate for more specific studies towards Bi-based fluorescent materials. Moreover, it was detected that polymer 1 is more than twice as active against H. pylori as polymer 2. It can be concluded that there is an existing relationship between the structure and the antibacterial activity because the presence of chloride and triethylammonium ions in the structure of complex 2 reduces the antibacterial activity.

Bi(OAc)3/chiral phosphoric acid catalyzed enantioselective allylation of seven-membered cyclic imines, dibenzo[b,f][1,4]oxazepines

An efficient asymmetric allylation reaction of allylboronates with seven-membered cyclic imines, dibenzo[b,f][1,4]oxazepines, is described. The reaction, which is catalyzed by a Bi(OAc)₃/CPA system, gives a range of chiral nitrogen-containing heterocycle structures in high yields and with good enantioselectivities. The conversion of these products to nitrogen-containing heterocycles is also demonstrated.

Bi(iii)-catalyzed aminooxygenation of propargyl amidines to synthesize 2-fluoroalkyl imidazole-5-carbaldehydes and their decarbonylations

The first example of main group metal Bi(iii)-catalyzed aminooxygenation of fluorinated propargyl amidines was developed to produce 2-fluoroalkyl imidazole-5-carbaldehydes in moderate to excellent yields, in which phenol played a critical role and could be recovered and recycled. In the presence of KOt-Bu, an unconventional decarbonylation occurred on the 2-fluoroalkyl imidazole-5-carbaldehydes.

Impact of structural changes in heteroleptic bismuth phosphinates on their antibacterial activity in Bi-nanocellulose composites

To study and evaluate the effect of ligand choice and distribution in bismuth phosphinates on toxicity and antibacterial activity, a series of novel diphenyl mono-phosphinato bismuth complexes, [BiPh2(O(O[double bond, length as m-dash])P(H)Ph)] 1, [BiPh2(O(O[double bond, length as m-dash])PPh2)] 2, [BiPh2(O(O[double bond, length as m-dash])PMe2)] 3 and [BiPh2(O(O[double bond, length as m-dash])P(p-MeOPh)2)] 4, were synthesised, characterised and structurally authenticated by X-ray crystallography. Evaluation of their antibacterial activity towards Staphylococcus aureus (S. aureus), methicillin-resistant S. aureus (MRSA), vancomycin-resistant Enterococci (VRE), Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) showed all four mono-phosphinato bismuth complexes to be highly active. However, unlike their less soluble bis-phosphinato analogues, they displayed an increased level of toxicity towards mammalian cells (COS-7, human and murine fibroblasts), where it was shown the complexes disrupt cellular membranes leading to cytotoxicity. The mono-phosphinato bismuth complexes were used to produce antibacterial nanocellulose composites. Leaching studies showed that complex 1 had the highest levels of leaching, at 15% of the total available bismuth when the composite was soaked in water. The aqueous leachates of 1 were bacteriostatic towards MRSA and VRE at concentrations between 4.0 and 4.6 μM, while being bactericidal towards E. coli above 2.8 μM. At similar concentrations the complex showed toxicity towards human fibroblast cells, with cell viability reduced to 2% (1, 2.4 μM). The possibility to control leaching of the bismuth complexes from cellulose composites through structural changes is evidence for their potential application in antibacterial surfaces and materials.

Efficacy and safety of twice a day, bismuth-containing quadruple therapy using high-dose tetracycline and metronidazole for second-line Helicobacter pylori eradication

BACKGROUND/AIMS

Conventional second-line, bismuth-containing quadruple therapy is administered four times a day. We aimed to evaluate the efficacy and safety of twice a day administration compared to the four times a day therapy.

METHODS

Medical records of consecutive patients with positive ¹³ C-urea breath tests (UBTs) after first-line eradication were reviewed. From December 2018 to June 2019, 100 consecutive ¹³ C-UBT-positive patients received tetracycline 1 g, metronidazole 750 mg, bismuth subcitrate 300 mg, and pantoprazole 20 mg twice a day for one week. The same number of consecutive¹³ C-UBT-positive patients before December 2018 was included as controls. The control group received tetracycline 500 mg and bismuth subcitrate 300 mg four times a day, metronidazole 500 mg three times a day, and pantoprazole 20 mg twice a day for one week. Eradication was confirmed based on a ¹³ C-UBT performed in the 5th week after taking quadruple therapy.

RESULTS

Ninety-eight patients from the twice a day group and 99 patients from the four times a day group were analyzed. The eradication rate did not differ between the twice a day group (92/98, 93.9%) and the four times a day group (92/99, 92.9%). Adverse drug effects were found in 36 patients from the twice a day group and 50 patients from the four times a day group (P = .051). Abdominal pain, discomfort, and distention were more common with four times a day intake (13.1%) than with twice a day intake (4.1%; P = .024).

CONCLUSIONS

We determined for the first time that twice a day intake of bismuth-containing quadruple therapy using 2 g/d of tetracycline, 1.5 g/d of metronidazole, and 600 mg/d of bismuth subcitrate for one week is effective and safe as the conventional four times a day therapy. Twice a day intake decreased abdominal pain, discomfort, and distention.

pH dependence of the non-cooperative binding of Bi3+ to human apo-metallothionein 1A: kinetics, speciation, and stoichiometry

ESI-MS along with cysteine modification show that the binding of Bi³⁺ to apo-metallothionein is non-cooperative with a coordination of BiS(cys)₃ up to Bi₆MT. Stopped flow kinetics reveal that the rate of binding depends on the pH and the Bi³⁺ anion.

Enantioselective and regioselective aza-Friedel–Crafts reaction of electron-rich phenols with isatin-derived ketimines

An efficient asymmetric aza-Friedel–Crafts reaction of phenols with isatin-derived ketimines is described.

Bi(III)-Catalyzed Enantioselective Allylation Reactions of Ketimines

Chiral homoallylic amines not only are found in pharmaceutically relevant compounds but also serve as versatile building blocks for chemical synthesis. However, catalytic allylation of ketimines with allylboronates, an attractive approach to synthesize chiral homoallylic amine scaffolds remain scarce. Herein, we develop a highly enantioselective allylation of isatin-derived ketimines with boron allylation reagents catalyzed by a Bi(OAc)₃-chiral phosphoric acid catalyst system. The reactions are remarkably efficient and mild, most of which were completed in less than an hour at room temperature with only 1/2 mol% (Bi(OAc)₃/CPA) catalyst loading. A wide range of chiral 3-allyl 3-aminooxindoles were obtained in excellent yields and enantioselectivities. The synthetic utility was demonstrated by efficient formal synthesis of (+)-AG-041R and (−)-psychotriasine. Preliminary mechanism was studied by control experiments and theoretical calculations.

•

Asymmetric allylation of ketimines

•

Bi(OAc)₃-chiral phosphoric acid catalyst

•

Downstream synthetic transformations

Catalytic, Tunable, One-Step Bismuth(III) Triflate Reaction with Alcohols: Dehydration Versus Dimerization

Bi(OTf)₃·xH₂O is a powerful catalyst for the dehydration of tertiary alcohols into alkenes in apolar solvents. The reaction proceeds smoothly and selectively, with amounts as low as 0.01 mol % catalyst, in yields up to 93%. Moreover, in polar solvents, Bi(OTf)₃·xH₂O (0.1-1 mol %) selectively catalyzes the dimerization of the alcohols instead, forming new C-C bonds, in yields up to 96%. This mild, efficient, economic, and eco-friendly method is applicable across different chemical classes and amenable to several functional groups.

Do bismuth complexes hold promise as antileishmanial drugs?

Even after 70 years, pentavalent antimonials sodium stibogluconate and meglumine antimoniate remain the most important and cost-effective antileishmanial drugs. However, the drugs cannot be delivered orally and treatment involves intravascular or intramuscular injections for 28 days under strict medical monitoring due to the toxicity of Sb(III). The main alternatives, amphotericin B, pentamidine and miltefosine, are expensive and not without their own problems. Bismuth sits below antimony in the periodic table and is considered to be relatively nontoxic to humans while being capable of providing powerful antimicrobial activity. This review describes recent efforts into developing antileishmanial Bi(III) and Bi(V) drugs, which may resemble Sb analogs in effect and mode-of-action while providing lower mammalian cell toxicity and opportunities of oral delivery. Within the last 10 years, various studies concerning bismuth-based compounds as potential antileishmanial agents have been published. This review seeks to summarize the relevant studies and draw a conclusion as to whether bismuth complexes have the potential to be effective drugs.

Modular synthesis of new C-aryl-nucleosides and their anti-CML activity

The C-aryl-ribosyles are of utmost interest for the development of antiviral and anticancer agents. Even if several synthetic pathways have been disclosed for the preparation of these nucleosides, a direct, few steps and modular approaches are still lacking. In line with our previous efforts, we report herein a one step - eco-friendly β-ribosylation of aryles and heteroaryles through a direct Friedel-Craft ribosylation mediated by bismuth triflate, Bi(OTf)₃. The resulting carbohydrates have been functionalized by cross-coupling reactions, leading to a series of new C-aryl-nucleosides (32 compounds). Among them, we observed that 5d exerts promising anti-proliferative effects against two human Chronic Myeloid Leukemia (CML) cell lines, both sensitive (K562-S) or resistant (K562-R) to imatinib, the "gold standard of care" used in this pathology. Moreover, we demonstrated that 5d kills CML cells by a non-conventional mechanism of cell death.

Comparative stability, toxicity and anti-leishmanial activity of triphenyl antimony(v) and bismuth(v) α-hydroxy carboxylato complexes

Organometallic bismuth(v) and antimony(v) α-hydroxy carboxylato complexes, [MPh₃(O₂CR(OH))₂] and [MPh₃(O₂CR(O))], have been synthesised, characterised and their activity towards Leishmania promastigotes and amastigotes, and human fibroblast cells, assessed and compared.

Improvement in the Anticancer Activity of 6-Mercaptopurine via Combination with Bismuth(III)

6-Mercaptopurine (6-MP) is a clinically important antitumor drug and its commercially available form is provided as monohydrate, belonging to biopharmaceuticals classification system (BCS) class II category. The combination of bismuth(III) (Bi(III)) with 6-MP was proved to significantly improve the anticancer activity of 6-MP, leading to the discovery of a new amorphous complex ([Bi(MP)₃(NO₃)₂]NO₃). The prepared [Bi(MP)₃(NO₃)₂]NO₃ was characterized by the matrix assisted laser desorption-ionization time-of-flight (MALDI-TOF)-MS, etc. Noticeably, according to the in vitro evaluations of cytotoxicity, cellular apoptotic, colony formation as well as cell migration, the anticancer activity of amorphous [Bi(MP)₃(NO₃)₂]NO₃ was found to be of high therapeutic effect over 6-MP.

Elucidation of the elusive structure and formula of the active pharmaceutical ingredient bismuth subgallate by continuous rotation electron diffraction

Bismuth subgallate was revealed as a coordination polymer providing insight into its solubility and gas sorption properties.