Pharmacomicrobiomics of cell-cycle specific anti-cancer drugs - is it a new perspective for personalized treatment of cancer patients?

Intestinal bacteria are equipped with an enzyme apparatus that is involved in the active biotransformation of xenobiotics, including drugs. Pharmacomicrobiomics, a new area of pharmacology, analyses interactions between bacteria and xenobiotics. However, there is another side to the coin. Pharmacotherapeutic agents can significantly modify the microbiota, which consequently affects their efficacy. In this review, we comprehensively gathered scientific evidence on the interplay between anticancer therapies and gut microbes. We also underlined how such interactions might impact the host response to a given therapy. We discuss the possibility of modulating the gut microbiota to increase the effectiveness/decrease the incidence of adverse events during tumor therapy. The anticipation of the future brings new evidence that gut microbiota is a target of interest to increase the efficacy of therapy.

Assessment of epinephrine sublingual stability and permeability pathways to enhance its permeability for the treatment of anaphylaxis

Prompt epinephrine (Epi) injection using auto-injectors is the initial life-saving out-of-hospital treatment for anaphylaxis. However, patients and healthcare providers are eagerly awaiting a more convenient alternative dosage form that would overcome auto-injectors drawbacks. Previously, we extensively evaluated multiple alternative fast-disintegrating sublingual Epi tablet (FDSTs) formulations. However, the sublingual stability of Epi and effect of modifying the sublingual microenvironment pH on its stability and transport pathways were not yet fully investigated. Results depicted that Epi remained sufficiently stable at various pHs in human saliva and porcine sublingual tissue's extract. Epi permeability (EP) through excised porcine sublingual membrane was greatest at pH 8.0 (p < 0.05), 11-fold higher than the negative control (Epi at pH 6.8). Sodium carbonate (Na Carb) 0.75% was the most efficient buffer to modify Epi solution pH to 8.0. Both sodium dodecyl sulfate (SDS) 0.075% and palmitoyl-DL-carnitine chloride (PCC) 1.2% increased paracellular EP 10-fold and 3-fold, respectively; however, both demonstrated a delayed enhancement (>5 min). Meanwhile, Na Carb and SDS combination increased EP 23-fold without a delay. It is evident that pH-modifiers or their SDS combination showed promising potential to enhance Epi sublingual permeability and further reduce the required Epi dose using FDSTs as a feasible alternative to Epi auto-injectors.

Modulation of the sublingual microenvironment and pH-dependent transport pathways to enhance atropine sulfate permeability for the treatment of organophosphates poisoning

Atropine sulfate (AS) auto-injectors are the only approved antidote for out-of-hospital emergency treatment of organophosphates (OP) toxicity. However, they are only available for military use and require the administration of multiple auto-injectors. Therefore, an alternative, patient-friendly and more affordable fast-disintegrating sublingual tablets (FDSTs) of AS were previously developed. In this article, the effect of modifying the microenvironment's pH and/or using penetration enhancers on AS sublingual transport pathways were evaluated in an attempt to further enhance AS sublingual permeability. Ten different AS FDST formulations with or without the incorporation of alkalizer and various penetration enhancers were manufactured and characterized. AS permeability was investigated through excised porcine sublingual membrane using Franz cells. Results showed that the incorporation of either a transcellular enhancer or alkalizer achieved a significantly higher AS permeability enhancement (twofold). Combining sodium bicarbonate (Na Bicarb) 2% as alkalizer with sodium dodecyl sulfate (SDS) 1% as a transcellular enhancer resulted in the greatest synergistic enhancement in AS sublingual permeability (up to twelvefold). In conclusion, the modified AS FDST developed in this work has the potential to improve the pharmacokinetic parameters of AS following sublingual administration for the first-aid treatment of OP toxicity in future animal bioequivalency studies.

Design and Application in Delivery System of Intranasal Antidepressants

One of the major reasons why depressed patients fail their treatment course is the existence of the blood-brain barrier (BBB), which prevents drugs from being delivered to the central nervous system (CNS). In recent years, nasal drug delivery has achieved better systemic bioavailability and activity in low doses in antidepressant treatment. In this review, we focused on the latest strategies for delivery carriers (or formation) of intranasal antidepressants. We began this review with an overview of the nasal drug delivery systems, including nasal drug delivery route, absorption mechanism, advantages, and limitations in the nasal drug delivery route. Next, we introduced the development of nasal drug delivery devices, such as powder devices, liquid-based devices, and so on. Finally, intranasal delivery carriers of antidepressants in clinical studies, including nanogels, nanostructured lipid, liposomes nanoparticles, nanoemulsions/microemulsion, were summarized. Moreover, challenges and future perspectives on recent progress of intranasal delivery carriers in antidepressant treatments were discussed.

Personalised 3D Printed Fast-Dissolving Tablets for Managing Hypertensive Crisis: In-Vitro/In-Vivo Studies

Hypertensive crisis (HC) is an emergency health condition which requires an effective management strategy. Over the years, various researchers have developed captopril based fast-dissolving formulations to manage HC; however, primarily, the question of personalisation remains unaddressed. Moreover, commercially these formulations are available as in fixed-dose combinations or strengths, so the titration of dose according to patient's prerequisite is challenging to achieve. The recent emergence of 3D printing technologies has given pharmaceutical scientists a way forward to develop personalised medicines keeping in view patients individual needs. The current project, therefore, is aimed at addressing the limitations as mentioned above by developing fast-dissolving captopril tablets using 3D printing approach. Captopril unloaded (F1) and loaded (F2-F4) filaments were successfully produced with an acceptable drug loading and mechanical properties. Various captopril formulations (F2-F4) were successfully printed using fused deposition modelling technique. The results revealed that the formulations (F2 and F3) containing superdisintegrant had a faster extent of dissolution and in-vivo findings were endorsing these results. The present study has successfully exhibited the utilisation of additive manufacturing approach to mend the gap of personalisation and manufacturing fast-dissolving captopril 3D printed tablets. The procedure adopted in the present study may be used for the development of fused deposition modelling (FDM) based fast-dissolving 3D printed tablets.

Biopolymer Substrates in Buccal Drug Delivery: Current Status and Future Trend

BACKGROUND

This paper provides a critical review of biopolymer-based substrates, especially the cellulose derivatives, for their application in buccal drug delivery. Drug delivery to the buccal mucous has the benefits of immobile muscle, abundant vascularization and rapid recovery, but not all the drugs can be administered through the buccal mucosa (e.g., macromolecular drugs), due to the low bioavailability caused by their large molecular size. This shortfall inspired the rapid development of drug-compounding technologies and the corresponding usage of biopolymer substrates.

METHODS

Cellulose derivatives have been extensively developed for drug manufacturing to facilitate its delivery. We engaged in structured research of cellulose-based drug compounding technologies. We summarized the characteristic cellulose derivatives which have been used as the biocompatible substrates in buccal delivery systems. The discussion of potential use of the rapidly-developed nanocellulose (NC) is also notable in this paper.

RESULTS

Seventy-eight papers were referenced in this perspective paper with the majority (sixty-five) published later than 2010. Forty-seven papers defined the buccal drug delivery systems and their substrates. Fifteen papers outlined the properties and applications of cellulose derivatives. Nanocellulose was introduced as a leading edge of nanomaterial with sixteen papers highlighted its adaptability in drug compounding for buccal delivery.

CONCLUSION

The findings of this perspective paper proposed the potential use of cellulose derivatives, the typical kind of biopolymers, in the buccal drug delivery system for promoting the bioavailability of macromolecular drugs. Nanocellulose (NC) in particular was proposed as an innovative bio-binder/carrier for the controlled-release of drugs in buccal system.

Effect of Fast-Disintegrating Tablets' Characteristics on the Sublingual Permeability of Atropine Sulfate for the Potential Treatment of Organophosphates Toxicity

Atropine sulfate (AS) fast-disintegrating sublingual tablets (FDSTs) were tested for AS sublingual permeation's feasibility as a potential alternative dosage form to treat organophosphates (OP) toxicity. More than 12,000 OP pesticide toxicity cases were reported in the USA from 2011 to 2014. AS is the recommended antidote for OP toxicity; however, it is only available as an ATROPEN® auto-injector, an IM injection, for self-administration, which is associated with several drawbacks and limitations. Six AS FDST batches were formulated and characterized. Two tablet sizes, group A weighing 150 mg and group B weighing 50 mg, were formulated with three different AS doses: 2 mg (A1 and B1), 4 mg (A2 and B2), and 8 mg (A3 and B3). AS in vitro diffusion and sublingual permeation were investigated in Franz cells using a cellulose membrane and an excised porcine sublingual membrane. The effect of AS load and tablet size on sublingual permeation was also evaluated. All batches passed quality control tests. AS FDSTs' size and AS load had a significant effect on tablet disintegration time and drug dissolution, which significantly impacted AS concentration gradient across the diffusional membrane. Group B FDSTs (smaller tablets) resulted in a significantly higher initial permeation (JAUC_0-15) compared to group A FDSTs. Also, the cumulative AS (JAUC_0-90) and AS influx (J) increased linearly with increasing AS dose. These AS FDSTs have the potential to be explored in vivo to determine the required bioequivalent sublingual AS dose as an alternative dosage form for the treatment of OP toxicity.

Formulation and Evaluation of Fast-Disintegrating Sublingual Tablets of Atropine Sulfate: the Effect of Tablet Dimensions and Drug Load on Tablet Characteristics

In this study, we formulated and evaluated the effects of tablet dimensions and drug load on the characteristics of atropine sulfate (AS) fast-disintegrating sublingual tablets (FDSTs). We aim to develop AS FDSTs as an alternative non-invasive and portable dosage form for the emergency treatment of organophosphate (OP) toxicity. AS autoinjector, AtroPen®, is the only self-administered dosage form available as an antidote for-out-of-hospital emergency use, but it is associated with several limitations and drawbacks. Seven FDST formulations of two tablet sizes, 150 mg (A) and 50 mg (B), and of several AS loads, 0 mg (A1, B1), 2 mg (A2, B2), 4 mg (B3), and 8 mg (B4a, B4b), were formulated and manufactured by direct compression. AS FDST characteristics were evaluated using USP and non-USP tests. Results were statistically compared at p < 0.05. All FDSTs passed the USP content uniformity and friability tests, disintegrated and released AS in ≤30 and 60 s. B1 and B2 were significantly harder than A1 and A2. Water uptake of A1 was significantly the highest. However, B1 and B2 had shorter disintegration and wetting times and higher amounts of AS dissolved than did A1 and A2 (p < 0.05). Increasing AS negatively affected FDST tensile strength (p < 0.05 for B4a) and water uptake (p < 0.05 for B3, B4a and B4b), however, without affecting AS dissolution. Formulation of AS up to 16% into smaller FDSTs was successful. Smaller FDSTs were harder and disintegrated more quickly. These AS FDSTS have the potential for further in vivo testing to evaluate their OP antidote potential.

Formulation and evaluation of sublingual delivery of piroxicam using thermosensitive polymer with an inverted Franz diffusion cell

Objectives

The aim of the study was to prepare a sublingual formulation for piroxicam using a thermosensitive polymer and to evaluate its permeation through porcine sublingual mucosa.

Methods

Formulation technique utilized the transition property of poloxamer from solution state at room temperature to gel state at oromucosal temperature (37 °C). The permeation of the drug was evaluated using an inverted Franz diffusion cell technique that allowed the dosage form to be directly applied onto the substrate with required volume of saliva. The formulation was characterized for microscopy of the piroxicam crystals, sol–gel transition property and in-vitro diffusion study.

Key findings

Poloxamer-based formulation enhanced solubility and increased permeability of the piroxicam.

Conclusion

Poloxamer formulation with 0.1% w/w piroxicam delivered a cumulative amount of 11.99 ± 7.82 and 11.23 ± 1.79 μg/cm2, while non-poloxamer formulation delivered 3.57 ± 2.20 and 4.60 ± 6.90 μg/cm2 with 0.1 and 0.5 ml artificial saliva, respectively, through porcine sublingual tissue in 6 h. A similar delivery profile was observed for 0.05% w/w piroxicam formulation as well.