Silica-Based Supported Ionic Liquid-like Phases as Heterogeneous Catalysts

Supported ionic liquid phases offer several advantages related with catalysis. Immobilization of ionic liquid on the solid support provides catalytic activity or efficient matrix for active phases, as enzymes or metal compounds. Ionic liquid can be physically adsorbed on the carrier (supported ionic liquid phase) or chemically grafted to the material surface (supported ionic liquid-like phase). The use of supported ionic liquid phases improves mass transport, reduces ionic amount in the process and, most importantly, enables effortless catalyst separation and recycling. Moreover, chemical modification of the surface material with ionic liquid prevents its leaching, enhancing length of catalyst life. Silica-based materials have become an effective and powerful matrix for supported ionic liquid-like phase due to its cost-efficiency, presence of hydroxyl groups on the surface enabling its functionalization, and specific material properties, such as the size and shapes of the pores. For these reasons, supported ionic liquid-like phase silica-based materials are successfully used in the organic catalysis.

Design and Preparation of Copper(II)-Mesalamine Complex Functionalized on Silica-Coated Magnetite Nanoparticles and Study of Its Catalytic Properties for Green and Multicomponent Synthesis of Highly Substituted 4H-Chromenes and Pyridines

In the present study, a green and ecofriendly nanocatalyst was synthesized through functionalization of 2,4,6-trichloro-1,3,5-triazine (TCT) and mesalamine on silica-coated magnetic nanoparticles (MNPs), then coordination with Cu²⁺ without agglomeration, consecutively. The silica-coated MNPs functionalized with the Cu(*II)-mesalamine complex was (Fe₃O₄@SiO₂@NH₂-TCT-mesalamine-Cu(II) MNPs) completely characterized by FT-IR, XRD, EDX, FESEM, TEM, VSM, TGA, and BET analyses. Afterward, the activity of the novel catalyst was investigated in the synthesis of chromene heterocycles, which were an important group of organic compounds. The activity of Fe₃O₄@SiO₂@NH₂-TCT-mesalamine-Cu(II) MNPs as a high-performance heterogeneous nanocatalyst was evaluated for the synthesis of 2-amino-4-aryl-6-(phenylthio)pyridine-3,5-dicarbonitriles and 2-amino-4H-chromenes via aromatic aldehydes, malononitrile, and enolizable C-H acids (resorcinol, 2-hydroxynaphthalene-1,4-dione, and benzenethiol) in ethanol under reflux conditions. Fe₃O₄@SiO₂-TCT-mesalamine-Cu(II) could be quickly separated using an external magnet and reused nine times without a remarkable reduction of its catalytic activity.

Design of a Schiff Base Complex of Copper Coated on Epoxy-Modified Core-Shell MNPs as an Environmentally Friendly and Novel Catalyst for the One-Pot Synthesis of Various Chromene-Annulated Heterocycles

An ecofriendly inorganic-organic hybrid and novel Schiff base complex of copper coated on epoxy-modified Fe3O4@SiO2 MNPs was successfully designed and prepared from readily available chemicals. In this method, a Schiff base complex as a linker is utilized to protect copper nanoparticles to the core-shell Fe3O4 exterior without agglomeration. The resulted Schiff base complex of copper coated on epoxy-modified Fe3O4@SiO2 MNPs was characterized and confirmed via different analyses such as FT-IR, TGA, XRD, VSM, FE-SEM, TEM, ICP, EDX, and BET. The novel catalyst was examined for the synthesis of various chromene-annulated heterocycles through the one-pot three component reaction of aromatic aldehydes, various phenols (2-hydroxynaphthalene-1,4-dione/resorcinol/β-naphthol), and malononitrile in ethanol at reflux conditions. This method includes important aspects like no usage of column chromatography, very short reaction times, simplicity of product isolation using ethanol, excellent yields, simple procedures, and magnetic recoverability of the catalyst. All in all, our method makes a novel and significant advancement in the synthesis of various chromene-annulated heterocycles.

Zr@IL-Fe3O4 MNPs as an efficient and green heterogeneous magnetic nanocatalyst for the one-pot three-component synthesis of highly substituted pyran derivatives under solvent-free conditions

The present study was conducted to synthesize Zr@IL-Fe3O4 MNPs as a new magnetically recoverable heterogeneous catalyst, which was then characterized by Fourier transform infrared (FT-IR) spectroscopy, energy dispersive X-ray spectroscopy (EDX), vibrating sample magnetometry (VSM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The catalytic behavior of the Zr@IL-Fe3O4 MNPs was efficiently used for the synthesis of highly substituted pyran derivatives via a one-pot three-component condensation of 4-hydroxycoumarin/dimedone, malononitrile, and arylaldehydes under solvent-free conditions. This new methodology demonstrated some important features, including short reaction times, excellent yields, lower loading of the catalyst, easy work-up, and recyclability of the catalyst for a minimum of six times without any noticeable decrease in catalytic activity.

Adsorption and Purification of Baicalin from Scutellaria baicalensis Georgi Extract by Ionic Liquids (ILs) Grafted Silica

Baicalin which has multiple biological activities is the main active component of the root of Scutellaria baicalensis Georgi (SBG). Although its isolation and purification by adsorption methods have aroused much interest of the scientific community, it suffered from the poor selectivity of the adsorbents. In this work, an environmentally benign method was developed to prepare ionic liquids (ILs) grafted silica by using IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim]NTf₂) and ethanol as reaction media. The IL 1-propyl-3-methylimidazolium chloride ([C₃mim]Cl) grafted silica ([C₃mim]⁺Cl⁻@SiO₂) was used to adsorb and purify baicalin from the root extract of Scutellaria baicalensis Georgi (SBG). Experimental results indicated that the adsorption equilibrium can be quickly achieved (within 10 min). The adsorption behavior of [C₃mim]⁺Cl⁻@SiO₂ for baicalin was in good agreement with Langmuir and Freundlich models and the adsorption was a physisorption process as suggested by Dubinin–Radushkevich model. Compared with commercial resins, [C₃mim]⁺Cl⁻@SiO₂ showed the strongest adsorption ability and highest selectivity. After desorption and crystallization, a purity of baicalin as high as 96.5% could be obtained. These results indicated that the ILs grafted silica materials were promising adsorbents for the adsorption and purification of baicalin and showed huge potential in the purification of other bioactive compounds from natural sources.

Novel biocompatible core/shell Fe3O4@NFC@Co(ii) as a new catalyst in a multicomponent reaction: an efficient and sustainable methodology and novel reusable material for one-pot synthesis of 4H-pyran and pyranopyrazole in aqueous media

Today, due to the developing need for inexpensive catalysts, recyclable magnetic nanocatalysts immobilized on polysaccharides possess many advantages over classical heterogeneous catalysts. However, cellulose has been an appealing material in catalysis science and technology. In this work, by controlling the interaction between the inorganic complexes and the support material, we designed a high activity nanostructured combination of a magnetic nanoparticle Fe3O4@NFC@Co(ii) terminated complex as a multi-nuclear catalyst. This protocol involves an environment friendly approach using cobalt acetate. The magnetic nanostructure Fe3O4@NFC@Co(ii) can be used as a novel, green, and a powerful catalyst that demonstrates a short reaction time, high yield and easy procedure for the cascade Knoevenagel-Michael-cyclocondensation reaction for the one-pot synthesis of 4H-pyrans and pyranopyrazoles. The superparamagnetic nanocomposite could be conveniently separated by using an external magnet. Moreover, the catalyst could be reused at least five times in new reaction runs without a noticeable loss of activity. The prepared catalyst was characterized by FT-IR, XRD, VSM, FESEM, EDAX, TEM, ICP, and TGA techniques. The experiments were achieved with good yields and implied that the catalytic method was effective and convenient for heterocyclic synthesis.

One-Pot Access to Diverse Functionalized Pyran Annulated Heterocyclic Systems Using SCMNPs@BPy-SO3H as a Novel Magnetic Nanocatalyst

The SCMNPs@BPy-SO3H catalyst was prepared and characterized using Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Vibrating Sample Magnetometry (VSM), Energy Dispersive X-ray Spectroscopy (EDX), X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). Afterwards, its capability was efficiently used to promote the one-pot, three-component synthesis of pyrano[2,3-c]pyrazole and 2-amino-3-cyano-pyrano[3,2-c]chromen-5(4H)-one derivatives. The strategy resulted in the desired products with excellent yields and short reaction times. The SCMNPs@BPy-SO3H catalyst was readily recovered using a permanent magnetic field and it was reused in six runs with a slight decrease in catalytic activity. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

One-pot synthesis of 2-amino-4H-chromene derivatives by MNPs@Cu as an effective and reusable magnetic nanocatalyst

MNPs@Cu as an effective, recyclable nanocatalyst was prepared and characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis vibrating sample magnetometry, scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction.

Anion–cation co-operative catalysis by artificial sweetener saccharine-based ionic liquid for sustainable synthesis of 3,4-dihydropyrano[c]chromenes, 4,5-dihydropyrano[4,3-b]pyran and tetrahydrobenzo[b]pyrans in aqueous medium

In this study, a saccharine-based ionic liquid [Bmim]Sac has been found to be a sustainable catalyst for the synthesis of 3,4-dihydropyrano[c]chromenes, 4,5-dihydropyrano[4,3-b]pyran and tetrahydrobenzo[b]pyrans scaffolds through Domino Knoevenagel–Michael reaction. The easy recovery of the catalyst and high yield of the products make the protocol attractive, sustainable and economical. A mechanistic hypothesis is discussed using the concept of cooperative catalysis based on the dual (electrophilic/nucleophilic) activation of reactants by [Bmim]Sac. Furthermore, dual hydrogen bonding of saccharinate anions plays an important role in the activation of nucleophiles.

Artificial sweetener saccharine based ionic for sustainable synthesis of 3,4-dihydropyrano[c]chromenes, 4,5-dihydropyrano[4,3-b]pyran and tetrahydrobenzo[b]pyrans in aqueous medium scaffolds through Domino Knoevenagel–Michael reaction.

(CTA)3[SiW12]–Li+–MMT: a novel, efficient and simple nanocatalyst for facile and one-pot access to diverse and densely functionalized 2-amino-4H-chromene derivatives via an eco-friendly multicomponent reaction in water

A simple, facile and highly efficient one-pot synthesis of a pharmaceutically interesting diverse kind of functionalized 2-amino-4H-chromene is reported.

Synthesis of a novel dendrimer core of oxo-vanadium phthalocyanine magnetic nano particles: as an efficient catalyst for the synthesis of 3,4-dihydropyrano[c]chromenes derivatives under green condition

A novel magnetically recoverable nanocatalyst with an amino vanadium oxo phthalocyanine pending, was synthesized, characterized and applied for the preparation of 3,4-dihydropyrano[c]chromenes derivatives.