Self-assembled silk fibroin cross-linked with genipin supplements microbial carbonate precipitation in building material

The process of microbially induced carbonate precipitation (MICP) is known to effectively improve engineering properties of building materials and so does silk fibroin (SF). Thus, in this study, an attempt was taken to see the improvement in sand, that is, basic building material coupled with MICP and SF. Urease producing Bacillus megaterium was utilized for MICP in Nutri-Calci medium. To improve the strength of SF itself in bacterial solution, it was cross-linked with genipin at the optimized concentration of 3.12 mg/mL. The Fourier transform infrared (FTIR) spectra confirmed the crosslinking of SF with genipin in bacterial solution. In order to understand how such cross-linking can improve engineering properties, sand moulds of 50 mm3 dimension were prepared that resulted in 35% and 55% more compressive strength than the one prepared with bacterial solution with SF and bacterial solution only, respectively with higher calcite content in former one. The FTIR, SEM, x-ray powder diffraction spectrometry and x-ray photoelectron spectroscopy analyses confirmed higher biomineral precipitation in bacterial solution coupled with genipin cross-linked SF. As the process of MICP is proven to replace cement partially from concrete without negatively influence mechanical properties, SF cross-linked with genipin can provide additional significance in developing low-carbon cement-based composites.

Fabrication of a novel 3D scaffold for cartilage tissue repair: In-vitro and in-vivo study

Self-repairing is not an advanced ability of articular cartilage. Tissue engineering has provided a novel way for reconstructing cartilage using natural polymers because of their biocompatibility and bio-functionality. The purpose of cartilage tissue engineering is to design a scaffold with proper pore structure and similar biological and mechanical properties to the native tissue. In this study, porous scaffolds prepared from gelatin, chitosan and silk fibroin were blended with varying ratios. Between the blends of chitosan (C), gelatin (G) and silk fibroin (S), the scaffold with the weight per volume ratio of 2:2:3 (w/v) showed the most favorable and higher certain properties than the other blends. The CGS 2:2:3 scaffold showed the best pore size that is between 100 μm and 300 μm. The water absorption and degradation rate of the CGS 2:2:3 scaffold were found suitable for cartilage tissue engineering. Cell culture study using human chondrocytes showed good cell adhesion and proliferation. To further study the effect of this scaffold on the living tissue, 36 rabbits were randomly assigned to CGS 2:2:3 scaffold with and without seeded chondrocytes and control groups. Hematoxylin and Eosin (H&E), Masson's trichrome (MT), and safranin O (SO) staining showed 65 ± 9.1% new cartilage tissue present in the defect filled with cell-seeded scaffold and most of the cartilaginous tissue was hyaline cartilage, while the control group showed no new cartilage tissue.

Growth factor sequestration and enzyme-mediated release from genipin-crosslinked gelatin microspheres

Controlled release of growth factors allows the efficient, localized, and temporally-optimized delivery of bioactive molecules to potentiate natural physiological processes. This concept has been applied to treatments for pathological states, including chronic degeneration, wound healing, and tissue regeneration. Peptide microspheres are particularly suited for this application because of their low cost, ease of manufacture, and interaction with natural remodeling processes active during healing. The present study characterizes gelatin microspheres for the entrapment and delivery of growth factors, with a focus on tailored protein affinity, loading capacity, and degradation-mediated release. Genipin crosslinking in PBS and CHES buffers produced average microsphere sizes ranging from 15 to 30 microns with population distributions ranging from about 15 to 60 microns. Microsphere formulations were chosen based on properties important for controlled transient and spatial delivery, including size, consistency, and stability. The microsphere charge affinity was found to be dependent on gelatin type, with type A (GelA) carriers consistently having a lower negative charge than equivalent type B (GelB) carriers. A higher degree of crosslinking, representative of primary amine consumption, resulted in a greater negative net charge. Gelatin type was found to be the strongest determinant of degradation, with GelA carriers degrading at higher rates versus similarly crosslinked GelB carriers. Growth factor release was shown to depend upon microsphere degradation by proteolytic enzymes, while microspheres in inert buffers showed long-term retention of growth factors. These studies illuminate fabrication and processing parameters that can be used to control spatial and temporal release of growth factors from gelatin-based microspheres.

A comparative investigation of Bombyx mori silk fibroin hydrogels generated by chemical and enzymatic cross-linking

Fibroin, the major proteinaceous component of the silk fiber produced by larvae of the domesticated silk moth (Bombyx mori), has been widely investigated as a biomaterial for potential applications in tissue engineering and regenerative medicine. Following sol-gel transition, silk fibroin solutions can generate hydrogels that present certain advantages when employed as biomaterials, especially if they are cross-linked. The subject of this study was the self-cross-linking of silk fibroin through a process induced by the enzyme horseradish peroxidase (HRP) in the presence of hydrogen peroxide, a method only recently proposed and scarcely reported. The hydrogels were prepared either by physical cross-linking, by cross-linking with a natural compound (genipin), or by enzymatic cross-linking. The products were comparatively characterized in regard to their synthesis and background chemical aspects, physical and optical properties, mechanical properties, secondary structure, swelling/deswelling behavior, enzymatic degradation, and compatibility as substrates for cell adhesion and proliferation. The study confirmed the advantages of the HRP-induced cross-linking, which included considerably shorter gelation times, enhanced elasticity of the resulting hydrogels, and improved cytocompatibility. Discrepancies between certain results of this investigation and those reported previously were discussed in detail.

Non-immunogenic, porous and antibacterial chitosan and Antheraea mylitta silk sericin hydrogels as potential dermal substitute

Limitation of existing grafts including restricted donor site, risks of immune reactions, infectious diseases and high cost alarms the growing need of natural, cost effective and functional graft as the dermal substitute. We fabricate stable (>6 weeks) and porous (57.23-75.22μm) yet flexible (in variable pH) matrices using Antheraea mylitta sericin crosslinked with well known biocompatible polysaccharide chitosan by natural crosslinker (genipin) without using any harsh chemical. The fabricated matrices are characterized in terms of chemical modifications (Fourier transform infrared spectroscopy), crystallinity (X-ray diffraction), swelling, degradability and thermal stability. The hydrogels show good adhesion, migration, proliferation and viability of human dermal fibroblasts. The matrices cause no significant immune response of inflammatory cytokines (TNF-α and IL-1β) and hemolysis of human blood. These also retain their intrinsic antioxidant (196.1±17.7μM Fe (II)/mg) and antibacterial (8-15mm zone of inhibition) properties. These results indicate their potential as a cost effective and antibacterial dermal substitute.

A Dual-Biotic System for the Concurrent Delivery of Antibiotics and Probiotics: In Vitro, Ex Vivo, In Vivo and In Silico Evaluation and Correlation

PURPOSE

A delayed release bio-polymeric Dual-Biotic system has been extensively evaluated in this study to overcome the therapeutic issue of probiotic killing due to incorrect administration with the antibiotic.

METHODS

In vitro and ex vivo release and characterization studies have been undertaken on the Dual-Biotic system. In vivo analyses utilizing a Large White pig model were also performed with commercial products used as a comparison. Intestinal fluid for probiotic quantification was aspirated using a surgically implanted intestinal cannula with Lactobacillus acidophilus cell counts determined through luminescence and inoculation onto Lactobacilli-specific agar. Plasma amoxicillin concentrations were determined through Ultra-Performance Liquid Chromatography. The reactional profile and crosslinking mechanism of ovalbumin and genipin was elucidated using molecular mechanic energy relationships in a vacuum system by exploring the spatial disposition of different concentrations of genipin with respect to ovalbumin with ovalbumin/genipin ratios of 1:1, 1:5 and 1:10.

RESULTS

In vivo evaluation of the Dual-Biotic system detailed maximum Lactobacillus viability (~455% baseline viability) 6 h after oral administration. Concurrent administration of the commercial products revealed a 75% decrease in bacterial viability when compared to the controls analyzed. A level A in vitro-in vivo correlation was also established with 96.9% predictability of amoxicillin release ascertained. The computational results achieved corroborated well with the experimental findings and physicochemical data.

CONCLUSIONS

Evaluation and correlation of the Dual-Biotic system has detailed the success of the formulation for the concurrent delivery of an antibiotic and probiotic.

Fabrication and characterization of hydrocolloid dressing with silk fibroin nanoparticles for wound healing

Hydrocolloid dressings have been developed for many types of wound healing. In particular, dressing is a critical component in the successful recover of burn injuries, which causes a great number of people to not only suffer from physical but also psychological and economic anguish each year. Additionally, silk fibroin is the safest material for tissue engineering due to biocompatibility. In this study, we fabricated hydrocolloid dressings incorporating silk fibroin nanoparticles to enhance the efficacy of hydrocolloid dressing and then use this silk fibroin nanoparticle hydrocolloid dressing (SFNHD) in animal models to treat burn wounds. The structures and properties of SFNHD were characterized using tensile strength and Cell Counting Kit-8 assay. The results indicated the structural stability and the cellular biocompatibility of the hydrocolloid dressing suggesting that SFNHD can be applied to the treatment of wounds. To demonstrate the capacity of a silk fibroin hydrocolloid dressing to treat burn wounds, we compared SFNHD to gauze and Neoderm^®, a commercially available dressing. This study clearly demonstrated accelerated wound healing with greater wound structural integrity and minimal wound size after treatment with SFNHD. These observations indicate that SFNHD may be an improvement upon current standard dressings such as Gauze and Neoderm^® for burn wounds.

Silk Hydrogels of Tunable Structure and Viscoelastic Properties Using Different Chronological Orders of Genipin and Physical Cross-Linking

Catering the hydrogel manufacturing process toward defined viscoelastic properties for intended biomedical use is important to hydrogel scaffolding function and cell differentiation. Silk fibroin hydrogels may undergo "physical" cross-linking through β-sheet crystallization during high pressure carbon dioxide treatment, or covalent "chemical" cross-linking by genipin. We demonstrate here that time-dependent mechanical properties are tunable in silk fibroin hydrogels by altering the chronological order of genipin cross-linking with β-sheet formation. Genipin cross-linking before β-sheet formation affects gelation mechanics through increased molecular weight, affecting gel morphology, and decreasing stiffness response. Alternately, genipin cross-linking after gelation anchored amorphous regions of the protein chain, and increasing stiffness. These differences are highlighted and validated through large amplitude oscillatory strain near physiologic levels, after incorporation of material characterization at molecular and micron length scales.

Osteogenic differentiation of human mesenchymal stem cells in freeze-gelled chitosan/nano β-tricalcium phosphate porous scaffolds crosslinked with genipin

The objective of this work was to investigate material properties and osteogenic differentiation of human mesenchymal stem cells (hMSCs) in genipin (GN) crosslinked chitosan/nano β-tricalcium phosphate (CS/nano β-TCP) scaffolds, and compare the results with tripolyphosphate (TPP) crosslinked scaffolds. Porous crosslinked CS/nano β-TCP scaffolds were produced by freeze-gelation using GN (CBG scaffold) and TPP (CBT scaffold) as crosslinkers. The prepared CBT and CBG scaffolds were characterized with respect to porosity, pore size, water content, wettability, compressive strength, mass loss, and osteogenic differentiation of hMSCs. All scaffolds displayed interconnected honeycomb-like microstructures. There was a significant difference between the average pore size, porosity, contact angle, and percent swelling of CBT and CBG scaffolds. The average pore size of CBG scaffolds was higher than CBT, the porosity of CBG was lower than CBT, the water contact angle of CBG was higher than CBT, and the percent swelling of CBG was lower than CBT. At a given crosslinker concentration, there was not a significant difference in compressive modulus and mass loss of CBG and CBT scaffolds. Metabolic activity of hMSCs seeded in CBG scaffolds was slightly higher than CBT. Furthermore, CBG scaffolds displayed slightly higher extent of mineralization after 21 days of incubation in osteogenic medium compared to CBT.

Sophorolipid assisted tunable and rapid gelation of silk fibroin to form porous biomedical scaffolds

Faster gelation of silk fibroin using biosurfactants: sophorolipid, towards 3D scaffolds for biomedical application.