Unravelling the characteristics of a heteropolysaccharide-protein from an Haloarchaeal strain with flocculation effectiveness in heavy metals and dyes removal

The production, characterization and potential application in heavy metals and dyes removal of a novel heteropolysaccharide-protein named, gpHb, produced by an Haloarchaeal strain Halogeometricum borinquense strain A52 were investigated. The highest gpHb yield of 13.96 ± 0.32 g/L was produced under optimized conditions by response surface methodology. We focused on the characteristics and flocculation performance of gpHb. An important attribute of protein with 16 protein types identified that occupied a total content of 50.2% in the gpHb. Additionally, carbohydrate that occupied 30.4% of the total bioflocculant content consisted of three monosaccharides. Fourier transform-infrared spectroscopy indicated the presence of carboxyl, hydroxyl, amine, amide, and sulphate groups. To further study flocculation activities, factors such as bioflocculant dosage, temperature, pH, salinity and cations addition were tested. In comparison to the chemical flocculant polyaluminium chloride, gpHb maintain high activity at large range of salinity and its flocculation activity was higher on both sides of pH 7. Addition of trivalent cation mainly Fe³⁺ enhances the flocculating rate indicating that the bioflocculant is negatively charged. Its practical applicability was established for heavy metals and dyes removal from saline aqueous solutions. The highest removal efficiency was observed with Cr³⁺ (91.4%) and Ni²⁺ (89.60%) and with basic blue 3 (83.8%) and basic red (78.6%). The excellent flocculation activity of gpHb under saline condition suggests its potential industrial utility for treatment of textile and tannery wastewaters.

Coagulation-flocculation mechanisms in wastewater treatment plants through zeta potential measurements

Based on the polyelectrolyte-contaminant physical and chemical interactions at the molecular level, this article analyzed and discussed the coagulation-flocculation and chemical precipitation processes in order to improve their efficiency. Bench experiments indicate that water pH, polyelectrolyte (PE) dosing strategy and cationic polyelectrolyte addition are key parameters for the stability of metal-PE complexes. The coagulation-flocculation mechanism is proposed based on zeta potential (ζ) measurement as the criteria to define the electrostatic interaction between pollutants and coagulant-flocculant agents. Polyelectrolyte and wastewater dispersions are exposed to an electrophoretic effect to determine ζ. Finally, zeta potential values are compared at pH 9, suggesting the optimum coagulant dose at 162mg/L polydadmac and 67mg/L of flocculant, since a complete removal of TSS and turbidity is achieved. Based on the concentration of heavy metals (0.931mg/L Sn, 0.7mg/L Fe and 0.63mg/L Pb), treated water met the Mexican maximum permissible limits. In addition, the treated water has 45mg O2/L chemical oxygen demand (COD) and 45mg C/L total organic carbon (TOC). The coagulation-flocculation mechanism is proposed taking into account both: zeta potential (ζ)-pH measurement and chemical affinity, as the criteria to define the electrostatic and chemical interaction between pollutants and polyelectrolytes.