Effect of chemical sanitizers with and without ultrasonication on Listeria monocytogenes as a biofilm within polyvinyl chloride drain pipes

Recent advances on the formation, detection, resistance mechanism, and control technology of Listeria monocytogenes biofilm in food industry

Listeria monocytogenes is an important foodborne pathogen that causes listeriosis, a severe and fatal condition. Biofilms are communities of microorganisms nested within a self-secreted extracellular polymeric substance, and they protect L. monocytogenes from environmental stresses. Biofilms, once formed, can lead to the persistence of L. monocytogenes in processing equipment and are therefore considered to be a major concern for the food industry. This paper briefly introduces the recent advancements on biofilm formation characteristics and detection methods, and focuses on analysis of the mechanism of L. monocytogenes biofilm resistance; Moreover, this paper also summarizes and discusses the existing different techniques of L. monocytogenes biofilm control according to the physical, chemical, biological, and combined strategies, to provide a theoretical reference to aid the choice of effective control technology in the food industry.

Lifestyle of Listeria monocytogenes and food safety: Emerging listericidal technologies in the food industry

Listeria monocytogenes, a causative agent of listeriosis, is a major foodborne pathogen. Among pathogens, L. monocytogenes stands out for its unique ecological and physiological characteristics. This distinct lifestyle of L. monocytogenes has a significant impact on food safety and public health, mainly through the ability of this pathogen to multiply at refrigeration temperature and to persist in the food processing environment. Due to a combination of these characteristics and emerging trends in consumer preference for ready-to-eat and minimally processed food, there is a need to develop effective and sustainable approaches to control contamination of food products with L. monocytogenes. Implementation of an efficient and reliable control strategy for L. monocytogenes must first address the problem of cross-contamination. Besides the preventive control strategies, cross-contamination may be addressed with the introduction of emerging post packaging non-thermal or thermal hurdles that can ensure delivery of a listericidal step in a packed product without interfering with the organoleptic characteristics of a food product. This review aims to present the most relevant findings underlying the distinct lifestyle of L. monocytogenes and its impact on food safety. We also discuss emerging food decontamination technologies that can be used to better control L. monocytogenes.

Comparative Evaluation of Different Sanitizers Against Listeria monocytogenes Biofilms on Major Food-Contact Surfaces

Contaminated food-contact surfaces are recognized as the primary reason for recent L. monocytogenes outbreaks in caramel apples and cantaloupes, highlighting the significance of cleaning and sanitizing food-contact surfaces to ensure microbial safety of fresh produce. This study evaluated efficacies of four commonly used chemical sanitizers at practical concentrations against L. monocytogenes biofilms on major food-contact surfaces including stainless steel, low-density polyethylene (LDPE), polyvinyl chloride (PVC), polyester (PET), and rubber. In general, efficacies against L. monocytogenes biofilms were enhanced by increasing concentrations of quaternary ammonium compound (QAC), chlorine, and chlorine dioxide, or extending treating time from 1 to 5 min. The 5-min treatments of 400 ppm QAC, 5.0 ppm chlorine dioxide, and 200 ppm chlorine reduced 3.0-3.7, 2.4-2.7, and 2.6-3.8 log₁₀ CFU/coupon L. monocytogenes biofilms depending on surfaces. Peroxyacetic acid (PAA) at 160 and 200 ppm showed similar antimicrobial efficacies against biofilms either at 1- or 5-min contact. The 5-min treatment of 200 ppm PAA caused 4.0-4.5 log₁₀ CFU/coupon reduction of L. monocytogenes biofilms on tested surfaces. Surface material had more impact on the efficacies of QAC and chlorine, less influence on those of PAA and chlorine dioxide, while organic matter soiling impaired sanitizer efficacies against L. monocytogenes biofilms independent of food-contact surfaces. Data from this study provide practical guidance for effective disinfection of food-contact surfaces in food processing/packing facilities.

Low-frequency electromagnetic fields as an alternative to sanitize water of drinking systems in poultry production?

Low-frequency electromagnetic fields (LF-EMF) may present an alternative to conventional sanitation methods of water supply lines in animal production. The objective of this study was to evaluate the effect of the application of LF-EMF on bacterial concentrations and biofilms at scale-models of different drinking systems (circulating and non-circulating) conventionally used in poultry holdings. Treated systems were equipped with commercial devices producing pulsed electromagnetic signals of low frequency up to 10,000 Hz; max. 21 mT. Exposure of water to LF-EMF resulted in changes of the culturable bacterial counts, although with high standard deviations. Differing between systems types, LF-EMF treatment seemed to be responsible either for a limitation or for an increase of colony forming unit counts, with partly statistically significant differences, especially in early stages of treatment. In contrast, neither biofilm formation nor counts of cells suspended in water differed between treated and control lines over 28 days of experiment, as determined by fluorescence microscopy. Although this study indicates that LF-EMF may influence culturability of water microorganisms, no clear inhibitory effects on bacterial biofilm formation or on planktonic microbes by LF-EMF treatment were confirmed in the experiments.

Bio-enzymes for inhibition and elimination of Escherichia coli O157:H7 biofilm and their synergistic effect with sodium hypochlorite

Escherichia coli O157:H7 is one of the most important pathogens worldwide. In this study, three different kinds of enzymes, DNase I, proteinase K and cellulase were evaluated for inhibitory or degrading activity against E. coli O157:H7 biofilm by targeting extracellular DNA, proteins, and cellulose, respectively. The cell number of biofilms formed under proteinase K resulted in a 2.43 log CFU/cm² reduction with an additional synergistic 3.72 log CFU/cm² reduction after NaClO post-treatment, while no significant reduction occurred with NaClO treatment alone. It suggests that protein degradation could be a good way to control the biofilm effectively. In preformed biofilms, all enzymes showed a significant reduction of 16.4–36.7% in biofilm matrix in 10-fold diluted media (p < 0.05). The sequential treatment with proteinase K, cellulase, and NaClO showed a significantly higher synergistic inactivation of 2.83 log CFU/cm² compared to 1.58 log CFU/cm² in the sequence of cellulase, proteinase K, and NaClO (p < 0.05). It suggests that the sequence of multiple enzymes can make a significant difference in the susceptibility of biofilms to NaClO. This study indicates that the combination of extracellular polymeric substance-degrading enzymes with NaClO could be useful for the efficient control of E. coli O157:H7 biofilms.

Bacterial diversity of floor drain biofilms and drain waters in a Listeria monocytogenes contaminated food processing environment

Sanitation protocols are applied on a daily basis in food processing facilities to prevent the risk of cross-contamination with spoilage organisms. Floor drain water serves along with product-associated samples (slicer dust, brine or cheese smear) as an important hygiene indicator in monitoring Listeria monocytogenes in food processing facilities. Microbial communities of floor drains are representative for each processing area and are influenced to a large degree by food residues, liquid effluents and washing water. The microbial communities of drain water are steadily changing, whereas drain biofilms provide more stable niches. Bacterial communities of four floor drains were characterized using 16S rRNA gene pyrosequencing to better understand the composition and exchange of drain water and drain biofilm communities. Furthermore, the L. monocytogenes contamination status of each floor drain was determined by applying cultivation-independent real-time PCR quantification and cultivation-dependent detection according to ISO11290-1. Pyrosequencing of 16S rRNA genes of drain water and drain biofilm bacterial communities yielded 50,611 reads, which were clustered into 641 operational taxonomic units (OTUs), affiliated to 16 phyla dominated by Proteobacteria, Firmicutes and Bacteroidetes. The most abundant OTUs represented either product- (Lactococcus lactis) or fermentation- and food spoilage-associated phylotypes (Pseudomonas mucidolens, Pseudomonas fragi, Leuconostoc citreum, and Acetobacter tropicalis). The microbial communities in DW and DB samples were distinct in each sample type and throughout the whole processing plant, indicating the presence of indigenous specific microbial communities in each processing compartment. The microbiota of drain biofilms was largely different from the microbiota of the drain water. A sampling approach based on drain water alone may thus only provide reliable information on planktonic bacterial cells but might not allow conclusions on the bacterial composition of the microbiota in biofilms.

DNase-Sensitive and -Resistant Modes of Biofilm Formation by Listeria monocytogenes

Listeria monocytogenes is able to form biofilms on various surfaces and this ability is thought to contribute to persistence in the environment and on contact surfaces in the food industry. Extracellular DNA (eDNA) is a component of the biofilm matrix of many bacterial species and was shown to play a role in biofilm establishment of L. monocytogenes. In the present study, the effect of DNaseI treatment on biofilm formation of L. monocytogenes EGD-e was investigated under static and dynamic conditions in normal or diluted complex medium at different temperatures. Biofilm formation was quantified by crystal violet staining or visualized by confocal laser scanning microscopy. Biomass of surface-attached L. monocytogenes varies depending on temperature and dilution of media. Interestingly, L. monocytogenes EGD-e forms DNase-sensitive biofilms in diluted medium whereas in full strength medium DNaseI treatment had no effect. In line with these observations, eDNA is present in the matrix of biofilms grown in diluted but not full strength medium and supernatants of biofilms grown in diluted medium contain chromosomal DNA. The DNase-sensitive phenotype could be clearly linked to reduced ionic strength in the environment since dilution of medium in PBS or saline abolished DNase sensitivity. Several other but not all species of the genus Listeria display DNase-sensitive and -resistant modes of biofilm formation. These results indicate that L. monocytogenes biofilms are DNase-sensitive especially at low ionic strength, which might favor bacterial lysis and release of chromosomal DNA. Since low nutrient concentrations with increased osmotic pressure are conditions frequently found in food processing environments, DNaseI treatment represents an option to prevent or remove Listeria biofilms in industrial settings.

Controlling attachment and growth of Listeria monocytogenes in polyvinyl chloride model floor drains using a peroxide chemical, chitosan-arginine, or heat

Listeria monocytogenes can colonize a poultry processing plant as a resident in floor drains. Limiting growth and attachment to drain surfaces may help lessen the potential for cross-contamination of product. The objective of this study was to compare a hydrogen peroxide-peroxyacetic acid-based chemical to chitosan-arginine or heat to prevent attachment of or destroy existing L. monocytogenes on the inner surface of model floor drains. L. monocytogenes was introduced to result in about 10(9) planktonic and attached cells within untreated polyvinyl chloride model drain pipes. Treatments (0.13 % peroxide-based sanitizer, 0.1 % chitosan-arginine, or 15 s of hot water at 95 to 100°C) were applied immediately after inoculation or after 24 h of incubation. Following treatment, all pipes were incubated for an additional 24 h; planktonic and attached cells were enumerated by plate count. All treatments significantly (P < 0.05) lowered numbers of planktonic and attached cells recovered. Chitosan-arginine resulted in approximately a 6-log reduction in planktonic cells when applied prior to incubation and a 3-log reduction after the inoculum had a chance to grow. Both heat and peroxide significantly outperformed chitosan-arginine (8- to 9-log reduction) and were equally effective before and after incubation. Heat was the only treatment that eliminated planktonic L. monocytogenes. All treatments were less effective against attached cells. Chitosan-arginine provided about a 4.5-log decrease in attached cells when applied before incubation and no significant decrease when applied after growth. Like with planktonic cells, peroxide-peroxyacetic acid and heat were equally effective before or after incubation, causing decreases ranging from 7 to 8.5 log for attached L. monocytogenes. Applied at the most efficacious time, any of these techniques may lessen the potential for L. monocytogenes to remain as a long-term resident in processing plant floor drains.

Control of Listeria monocytogenes in the processing environment by understanding biofilm formation and resistance to sanitizers

Listeria monocytogenes can colonize in the food processing environment and thus pose a greater risk of cross-contamination to food. One of the proposed mechanisms that facilitates such colonization is biofilm formation. As part of a biofilm, it is hypothesized that L. monocytogenes can survive sanitization procedures. In addition, biofilms are difficult to remove and may require additional physical and chemical mechanisms to reduce their presence and occurrence. The initial stage of biofilm formation is attachment to surfaces, and therefore it is important to be able to determine the ability of L. monocytogenes strains to attach to various inert surfaces. In this chapter, methods to study bacterial attachment to surfaces are described. Attachment is commonly induced by bringing planktonic cells into contact with plastic, glass, or stainless steel surfaces with or without food residues ("soil") in batch or continuous (e.g., with constant flow of nutrients) culture. Measurement of biofilm formed is carried out by detaching cells (with various mechanical methods) and measuring the viable counts or by measuring the total attached biomass. Resistance of biofilms to sanitizers is commonly carried out by exposure of the whole model surface bearing the attached cells to a solution of sanitizer, followed by measuring the survivors as described above.

Reduction by competitive bacteria of Listeria monocytogenes in biofilms and Listeria bacteria in floor drains in a ready-to-eat poultry processing plant

The ability of Listeria monocytogenes and two competitive exclusion (CE) bacteria, Lactococcus lactis subsp. lactis strain C-1-92 and Enterococcus durans strain 152, to form biofilms on coupons composed of different materials (stainless steel, plastic, rubber, glass, and silicone) was determined at 4 and 8 °C. Biofilm characteristics were determined by scanning electron microscopy. L. monocytogenes produced well-formed biofilms within 24 h at 37 °C on coupon surfaces. Treating Listeria-laden biofilms with the CE isolates individually at either 4 or 8 °C for 3 weeks substantially reduced or eliminated listeriae in the biofilms. Treatment with L. lactis subsp. lactis strain C-1-92 and E. durans strain 152 at 4 °C for 3 weeks reduced the population of L. monocytogenes in a biofilm from 7.1 to 7.7 log CFU/cm2 to 3.0 to 4.5 log CFU/cm2 and to 3.1 to 5.2 log CFU/cm2 , respectively, and treatment at 8 °C for 3 weeks reduced L. monocytogenes from 7.5 to 8.3 log CFU/cm2 to 2.4 to 3.5 log CFU/cm2 and to 3.8 to 5.2 log CFU/cm2, respectively, depending on the coupon composition. These two CE isolates were combined and evaluated for control of Listeria bacteria in floor drains of a ready-to-eat poultry processing plant. The results revealed that treating the floor drains with CE four times in the first week eliminated detectable Listeria bacteria from five of six drains, and the drains remained free of detectable Listeria bacteria for 13 weeks following the first four treatments. These studies indicate that CE can effectively reduce Listeria contamination in biofilms and in flow drains of a plant producing ready-to-eat poultry products.

Tracking cross-contamination transfer dynamics at a mock retail deli market using GloGerm

Ready-to-eat (RTE) deli meats are considered a food at high risk for causing foodborne illness. Deli meats are listed as the highest risk RTE food vehicle for Listeria monocytogenes. Cross-contamination in the retail deli market may contribute to spread of pathogens to deli meats. Understanding potential cross-contamination pathways is essential for reducing the risk of contaminating various products. The objective of this study was to track cross-contamination pathways through a mock retail deli market using an abiotic surrogate, GloGerm, to visually represent how pathogens may spread through the deli environment via direct contact with food surfaces. Six contamination origination sites (slicer blade, meat chub, floor drain, preparation table, employee's glove, and employee's hands) were evaluated separately. Each site was inoculated with 20 ml of GloGerm, and a series of standard deli operations were completed (approximately 10 min of work). Photographs were then taken under UV illumination to visualize spread of GloGerm throughout the deli. A sensory panel evaluated the levels of contamination on the resulting contaminated surfaces. Five of the six contamination origination sites were associated with transfer of GloGerm to the deli case door handle, slicer blade, meat chub, preparation table, and the employee's gloves. Additional locations became contaminated (i.e., deli case shelf, prep table sink, and glove box), but this contamination was not consistent across all trials. Contamination did not spread from the floor drain to any food contact surfaces. The findings of this study reinforce the need for consistent equipment cleaning and food safety practices among deli workers to minimize cross-contamination.

Evaluation of the efficacy of commercial sanitizers against adhered and planktonic cells of Listeria monocytogenes and Salmonella spp

Antimicrobial activities of two commercial disinfectants, alone or combined with heat, against three Salmonella strains and three Listeria monocytogenes strains were studied. The efficacy of disinfectants against planktonic bacteria and bacteria attached to three food contact industrial surfaces (stainless steel, polytetraflourethylene, and rubber) was investigated. The tests were conducted using the sanitizer (quaternary ammonium compounds, and alquyldiethylenediamineglycine and di-alquyldiamineethylglycine) concentrations recommended by the manufacturers, and concentrations twice and four times higher than those values. The recommended concentrations were not effective to kill bacteria, especially when they were attached to surfaces. Concentrations of disinfectants twice and four times higher than those recommended were needed to fully eliminate planktonic bacteria. These same sanitizer concentrations were not sufficient to remove attached bacteria. To remove them from the surfaces, a treatment with recommended concentrations in combination with heat was needed. Our results indicate that these two pathogenic bacteria could survive common sanitation programs used in the food industry.

Generation of airborne Listeria innocua from model floor drains

Listeria monocytogenes can colonize floor drains in poultry processing and further processing facilities, remaining present even after cleaning and disinfection. Therefore, during wash down, workers exercise caution to avoid spraying hoses directly into drains in an effort to prevent the escape and transfer of drain microflora to food contact surfaces. The objective of this study was to examine the extent to which an inadvertent water spray into a colonized floor drain can cause the spread of airborne Listeria. Listeria innocua was used to inoculate a polyvinyl chloride model floor drain, resulting in approximately 10(8) cells per ml of phosphate-buffered saline and 10(4) attached cells per square centimeter of inner surface. Each model drain was subjected to a 2-s spray of tap water at 68.9 kPa from a distance of 1 m. Drains were sprayed while filled and again after emptying. Airborne cells were collected by using sedimentation plates containing Listeria selective agar which were placed on the floor and walls of a contained room at incremental horizontal and vertical distances of 0.6, 1.2, 2.4, or 4.0 m from the drain. Sedimentation plates were exposed for 10 min. A mechanical sampler was used to also collect air by impaction on the surface of Listeria selective agar to determine the number of cells per liter of air. The experiment was conducted in triplicate rooms for each of four replications. L. innocua was detected on sedimentation plates on the floor as far as 4.0 m from the drain and on walls as high as 2.4 m above the floor and 4 m from the drain. A 2-s spray with a water hose into a contaminated drain can cause airborne spread of Listeria, resulting in the potential for cross-contamination of food contact surfaces, equipment, and exposed product.

HrcA and DnaK are important for static and continuous-flow biofilm formation and disinfectant resistance in Listeria monocytogenes

The food-borne pathogen Listeria monocytogenes is able to form biofilms in food processing environments. Since biofilms are generally difficult to eradicate during clean-up procedures, they pose a major risk for the food industry. Stress resistance mechanisms involved in L. monocytogenes biofilm formation and disinfectant resistance have, to our knowledge, not been identified thus far. In this study, we investigated the role of hrcA, which encodes the transcriptional regulator of the class I heat-shock response, and dnaK, which encodes a class I heat-shock response chaperone protein, in static and continuous-flow biofilm formation and resistance against benzalkonium chloride and peracetic acid. Induction of both hrcA and dnaK during continuous-flow biofilm formation was observed using quantitative real-time PCR and promoter reporters. Furthermore, in-frame deletion and complementation mutants of hrcA and dnaK revealed that HrcA and DnaK are required to reach wild-type levels of both static and continuous-flow biofilms. Finally, disinfection treatments of planktonic-grown cells and suspended static and continuous-flow biofilm cells of wild-type and mutants showed that HrcA and DnaK are important for resistance against benzalkonium chloride and peracetic acid. In conclusion, our study revealed that HrcA and DnaK are important for L. monocytogenes biofilm formation and disinfectant resistance.

Mixed species biofilms of Listeria monocytogenes and Lactobacillus plantarum show enhanced resistance to benzalkonium chloride and peracetic acid

We investigated the formation of single and mixed species biofilms of Listeria monocytogenes strains EGD-e and LR-991, with Lactobacillus plantarum WCFS1 as secondary species, and their resistance to the disinfectants benzalkonium chloride and peracetic acid. Modulation of growth, biofilm formation, and biofilm composition was achieved by addition of manganese sulfate and/or glucose to the BHI medium. Composition analyses of the mixed species biofilms using plate counts and fluorescence microscopy with dual fluorophores showed that mixed species biofilms were formed in BHI (total count, 8-9 log₁₀ cfu/well) and that they contained 1-2 log₁₀ cfu/well more L. monocytogenes than L. plantarum cells. Addition of manganese sulfate resulted in equal numbers of both species (total count, 8 log₁₀ cfu/well) in the mixed species biofilm, while manganese sulfate in combination with glucose, resulted in 1-2 log₁₀ more L. plantarum than L. monocytogenes cells (total count, 9 log₁₀ cfu/well). Corresponding single species biofilms of L. monocytogenes and L. plantarum contained up to 9 log₁₀ cfu/well. Subsequent disinfection treatments showed mixed species biofilms to be more resistant to treatments with the selected disinfectants. In BHI with additional manganese sulfate, both L. monocytogenes strains and L. plantarum grown in the mixed species biofilm showed less than 2 log₁₀ cfu/well inactivation after exposure for 15 min to 100 μg/ml benzalkonium chloride, while single species biofilms of both L. monocytogenes strains showed 4.5 log₁₀ cfu/well inactivation and single species biofilms of L. plantarum showed 3.3 log₁₀ cfu/well inactivation. Our results indicate that L. monocytogenes and L. plantarum mixed species biofilms can be more resistant to disinfection treatments than single species biofilms.

Importance of SigB for Listeria monocytogenes static and continuous-flow biofilm formation and disinfectant resistance

Listeria monocytogenes is a food-borne pathogen that is able to form biofilms in food processing facilities. Biofilms are generally more resistant to antimicrobial agents, making it difficult to eradicate them during cleanup procedures. So far, little is known about the function of stress resistance mechanisms in biofilm formation and their resistance to disinfectants. In this study, we investigated the role of sigB, which encodes a major transcriptional regulator of stress response genes, in L. monocytogenes static and continuous-flow biofilm formation and its function in the resistance of biofilm cells to the disinfectants benzalkonium chloride and peracetic acid. Quantitative real-time PCR and promoter reporter studies showed that sigB is activated in static and continuous-flow biofilms. Biofilm formation studies using an in-frame sigB deletion mutant and complementation mutant showed that the presence of SigB is required to obtain wild-type levels of both static and continuous-flow biofilms. Finally, disinfection treatments of planktonically grown cells and cells dispersed from static and continuous-flow biofilms showed that SigB is involved in the resistance of both planktonic cells and biofilms to the disinfectants benzalkonium chloride and peracetic acid.

Toxic effects of single-walled carbon nanotubes in the development of E. coli biofilm

The impact of single-walled carbon nanotubes (SWNTs) on the different developmental stages of biofilms has been investigated using E. coli K12 as a model organism. Specifically, we investigated (i) the impact of SWNT concentration on cell growth and biofilm formation, (ii) toxic effects of SWNTs on mature biofilms, and (iii) formation of biofilm on SWNT-coated surfaces. The results show that at the initial stage of biofilm formation, SWNTs come into contact with bacterial cells prior to biofilm maturation and inhibit their growth. Furthermore, the results suggest that bacteria in mature biofilms are less sensitive to the presence of SWNTs than cells in other biofilm stages, similar to previous observations of biofilm resistance to antimicrobials. In mature biofilms, the soluble exopolymeric substances (EPS) secreted by the biofilm play an important role in mitigating the toxic effects of SWNTs. Upon exposure to SWNTs, biofilms without soluble EPS in the supernatant had a much more significant loss of biomass because of cell detachment from the biofilm than biofilms containing soluble EPS. To observe similar cell loss, biofilms with soluble EPS needed SWNT concentrations that were 10 times higher compared to biofilms without soluble EPS. Finally, SWNTs deposited onto surfaces affected significantly the subsequent biofilm development. Analysis of the total biomass and the area occupied by cells indicates that a SWNT-coated substratum has 10 times less biofilm colonization and biomass production than a control substratum without SWNTs.

Role of type 1 fimbriae and mannose in the development of Escherichia coli K12 biofilm: from initial cell adhesion to biofilm formation

The influence of type 1 fimbriae, mannose-sensitive structures, on biofilm development and maturation has been examined by the use of three isogenic Escherichia coli K12 strains: wild type, fimbriated, and non-fimbriated. Experiments with the three strains were done in minimal medium or Luria-Bertani broth supplemented with different concentrations of d-mannose. The investigation consisted of: (1) characterizing the bacterial surface of the three strains with respect to hydrophilicity and surface charge, (2) investigating the effect of type 1 fimbriae on bacterial adhesion rate and reversibility of initial adhesion on glass surfaces, and (3) verifying the role of type 1 fimbriae and exopolysaccharides (EPS) in biofilm maturation. The results suggest that type 1 fimbriae are not required for the initial bacterial adhesion on glass surfaces as the non-fimbriated cells had higher adhesion rates and irreversible deposition. Type 1 fimbriae, however, are critical for subsequent biofilm development. It was hypothesized that in the biofilm maturation step, the cells synthesize mannose-rich EPS, which functions as a 'conditioning film' that can be recognized by the type 1 fimbriae.