Inactivation kinetics of three Listeria monocytogenes strains under high hydrostatic pressure

Stress resistant rpsU variants of Listeria monocytogenes can become underrepresented due to enrichment bias

Population heterogeneity is an important component of the survival mechanism of Listeria monocytogenes, leading to cells in a population with diverse stress resistance levels. We previously demonstrated that several ribosomal gene rpsU mutations enhanced the stress resistance of L. monocytogenes and lowered the growth rate at 30 °C and lower temperatures. This study investigated whether these switches in phenotypes could result in a bias in strain detection when standard enrichment-based procedures are applied to a variety of strains. Detailed growth kinetics analysis of L. monocytogenes strains were performed, including the LO28 wild type (WT) and rpsU variants V14 and V15, during two commonly used enrichment-based procedures described in the ISO 11290-1:2017 and the U.S. Food and Drug Administration Bacteriological Analytical Manual (BAM). WT had a higher growth rate than the variants during the enrichment processes. Co-culture growth kinetics predictions for WT and rpsU variants showed that the detection chances of the rpsU mutants were reduced from ∼52 % to less than ∼13 % and ∼ 3 % during ISO and BAM enrichment, respectively, which were further validated through subsequent qPCR experiments. Higher heat stress resistance of rpsU variants did not lead to faster recovery during enrichment after heat treatment, and different pre-culturing temperatures before heat treatment did not significantly affect the growth kinetics of the WT and rpsU variants. Additionally, post-enrichment isolation procedures involving streaking on selective agar plates did not show preferences for isolating WT or rpsU variants nor affect the detection chance of rpsU variants. The difference in detection chance suggests that the selective enrichment procedures inadequately represent the genotypic diversity present in a sample. Hence, the enrichment bias during the L. monocytogenes isolation procedure may contribute to the observed underrepresentation of the rpsU mutation among L. monocytogenes isolates deposited in publicly available genome databases. The underrepresentation of rpsU mutants in our findings suggests that biases introduced by standard isolation and enrichment procedures could inadvertently skew our understanding of genetic diversity when relying on public databases.

Survival and inactivation kinetics of Salmonella enterica serovar Typhimurium in irradiated and natural poultry litter microcosms

The use of poultry litter as a biological soil amendment presents a risk for the preharvest contamination of fresh produce by Salmonella. In order to properly assess this risk, it is important to understand the factors influencing the persistence of Salmonella in poultry litter. This research was performed to investigate the influence of indigenous microflora on the survival of Salmonella Typhimurium in poultry litter. Microcosms of irradiated (sterilized) and natural poultry litter were inoculated with S. Typhimurium, adjusted to pH 8.0, 0.92 water activity (a_w), and stored at 30°C for 6 days. S. Typhimurium populations (log CFU g^-1) declined in both litter treatments and there were no significant differences (P > 0.05) in recovery between litter treatments on any sampling days (0 to 6). The pH of the natural litter significantly increased (P < 0.05) from 8.42 on day 0 to 9.00 on day 6. By day 6, S. Typhimurium populations in both litter treatments fell below the limit of detection (1 log CFU g^-1). The inactivation kinetics of S. Typhimurium in both litter treatments were described by the Weibull model. Under the experimental conditions (pH 8.0, 0.92 a_w, 30°C), the presence or absence of poultry litter microflora did not significantly influence the survival of S. Typhimurium. This study demonstrates that the mere presence of poultry litter microflora will not inhibit Salmonella survival. Instead, inhibitory interactions between various microorganisms in litter and Salmonella are likely dependent on more favorable environmental conditions (e.g., a_w, pH) for growth and competition.

The efficacy and safety of high-pressure processing of food

High-pressure processing (HPP) is a non-thermal treatment in which, for microbial inactivation, foods are subjected to isostatic pressures (P) of 400-600 MPa with common holding times (t) from 1.5 to 6 min. The main factors that influence the efficacy (log10 reduction of vegetative microorganisms) of HPP when applied to foodstuffs are intrinsic (e.g. water activity and pH), extrinsic (P and t) and microorganism-related (type, taxonomic unit, strain and physiological state). It was concluded that HPP of food will not present any additional microbial or chemical food safety concerns when compared to other routinely applied treatments (e.g. pasteurisation). Pathogen reductions in milk/colostrum caused by the current HPP conditions applied by the industry are lower than those achieved by the legal requirements for thermal pasteurisation. However, HPP minimum requirements (P/t combinations) could be identified to achieve specific log10 reductions of relevant hazards based on performance criteria (PC) proposed by international standard agencies (5-8 log10 reductions). The most stringent HPP conditions used industrially (600 MPa, 6 min) would achieve the above-mentioned PC, except for Staphylococcus aureus. Alkaline phosphatase (ALP), the endogenous milk enzyme that is widely used to verify adequate thermal pasteurisation of cows' milk, is relatively pressure resistant and its use would be limited to that of an overprocessing indicator. Current data are not robust enough to support the proposal of an appropriate indicator to verify the efficacy of HPP under the current HPP conditions applied by the industry. Minimum HPP requirements to reduce Listeria monocytogenes levels by specific log10 reductions could be identified when HPP is applied to ready-to-eat (RTE) cooked meat products, but not for other types of RTE foods. These identified minimum requirements would result in the inactivation of other relevant pathogens (Salmonella and Escherichia coli) in these RTE foods to a similar or higher extent.

Application of Whole Genome Sequencing to Aid in Deciphering the Persistence Potential of Listeria monocytogenes in Food Production Environments

Listeria monocytogenes is the etiological agent of listeriosis, a foodborne illness associated with high hospitalizations and mortality rates. This bacterium can persist in food associated environments for years with isolates being increasingly linked to outbreaks. This review presents a discussion of genomes of Listeria monocytogenes which are commonly regarded as persisters within food production environments, as well as genes which are involved in mechanisms aiding this phenotype. Although criteria for the detection of persistence remain undefined, the advent of whole genome sequencing (WGS) and the development of bioinformatic tools have revolutionized the ability to find closely related strains. These advancements will facilitate the identification of mechanisms responsible for persistence among indistinguishable genomes. In turn, this will lead to improved assessments of the importance of biofilm formation, adaptation to stressful conditions and tolerance to sterilizers in relation to the persistence of this bacterium, all of which have been previously associated with this phenotype. Despite much research being published around the topic of persistence, more insights are required to further elucidate the nature of true persistence and its implications for public health.

Amino acid substitutions in ribosomal protein RpsU enable switching between high fitness and multiple-stress resistance in Listeria monocytogenes

Microbial population heterogeneity contributes to differences in stress response between individual cells in a population, and can lead to the selection of genetically stable variants with increased stress resistance. We previously provided evidence that the multiple-stress resistant Listeria monocytogenes LO28 variant 15, carries a point mutation in the rpsU gene, resulting in an arginine-proline substitution in ribosomal protein RpsU (RpsU^17Arg-Pro). Here, we investigated the trade-off between general stress sigma factor SigB-mediated stress resistance and fitness in variant 15 using experimental evolution. By selecting for higher fitness in two parallel evolving cultures, we identified two evolved variants: 15EV1 and 15EV2. Whole genome sequencing and SNP analysis showed that both parallel lines mutated in the same codon in rpsU as the original mutation resulting in RpsU^17Pro-His (15EV1) and RpsU^17Pro-Thr (15EV2). Using a combined phenotyping and proteomics approach, we assessed the resistance of the evolved variants to both heat and acid stress, and found that in both lines reversion to WT-like fitness also resulted in WT-like stress sensitivity. Proteome analysis of L. monocytogenes LO28 WT, variant 15, 15EV1, and 15EV2 revealed high level expression of SigB regulon members only in variant 15, whereas protein profiles of both evolved variants were highly similar to that of the LO28 WT. Experiments with constructed RpsU^17Arg-Pro mutants in L. monocytogenes LO28 and EGDe, and RpsU^17Arg-His and RpsU^17Arg-Thr in LO28, confirmed that single amino acid substitutions in RpsU enable switching between multiple-stress resistant and high fitness states in L. monocytogenes.

Assessing the pressure resistance of Escherichia coli O157:H7, Listeria monocytogenes and Salmonella enterica to high pressure processing (HPP) in citric acid model solutions for process validation

Despite the commercial success of high pressure processing (HPP) in the juice industry, some regulatory agencies still require process validation. However, there is a lack of consensus on various aspects regarding validation protocols, including the selection of representative strains to be used in challenge tests. This study characterized the variable response of Escherichia coli O157:H7 (34 strains), Listeria monocytogenes (44 strains) and Salmonella enterica (45 strains) to HPP, and identified potential candidates to use in process validation. Stationary phase cells were submitted to 500 MPa for 1 min at 10 °C in model solutions consisting of tryptic soy broth + 0.6% yeast extract (TSBYE) adjusted to pH 4.5 and 6.0 with citric acid. At pH 6.0, pressure resistance widely varied between species and within strains of the same species. E. coli O157:H7 and L. monocytogenes were the most pressure resistant and showed high variability at strain level, as the total count range given by minimum and maximum counts spread between 2.0 and 6.5 log₁₀ CFU/ml. S. enterica was the least resistant pathogen with more than 82% of the isolates displaying non-detectable counts after HPP. Recovery through storage at 12 °C was also variable for all pathogens, but eventually most strains recovered with median counts on day 14 between 8.3 and 8.9 log₁₀ CFU/ml. For pH 4.5 solutions, 26 E. coli O157:H7 strains displayed survivors after HPP but did not adapt, registering non-detectable counts in the next sampling dates. None of the L. monocytogenes and S. enterica strains survived HPP or incubation at pH 4.5 (<2.0 log₁₀ CFU/ml), suggesting that citric acid at 4.16 g/l is a safe barrier for pathogen control under moderate HPP conditions. Principal component and cluster analyses served to propose strain cocktails for each species based on their pressure resistant and adaptation phenotypes. Additionally, S. enterica was identified as less pressure resistant and less prone to recover following HPP than E. coli O157:H7 and L. monocytogenes, so its relevance in process validation for juices should be questioned. Future work will validate the proposed strain cocktails on real food systems.

High pressure processing combined with selected hurdles: Enhancement in the inactivation of vegetative microorganisms

High pressure processing (HPP) as a nonthermal processing (NTP) technology can ensure microbial safety to some extent without compromising food quality. However, for vegetative microorganisms, the existence of pressure-resistant subpopulations, the revival of sublethal injury (SLI) state cells, and the resuscitation of viable but nonculturable (VBNC) state cells may constitute potential food safety risks and pose challenges for the further development of HPP application. HPP combined with selected hurdles, such as moderately elevated or low temperature, low pH, natural antimicrobials (bacteriocin, lactate, reuterin, endolysin, lactoferrin, lactoperoxidase system, chitosan, essential oils), or other NTP (CO₂ , UV-TiO₂ photocatalysis, ultrasound, pulsed electric field, ultrafiltration), have been highlighted as feasible alternatives to enhance microbial inactivation (synergistic or additive effect). These combinations can effectively eliminate the pressure-resistant subpopulation, reduce the population of SLI or VBNC state cells and inhibit their revival or resuscitation. This review provides an updated overview of the microbial inactivation by the combination of HPP and selected hurdles and restructures the possible inactivation mechanisms.

Modelling the piezo-protection effect exerted by lactate on the high pressure resistance of Listeria monocytogenes in cooked ham

Food safety is often based on the application of several preservative (hurdle) factors whose combination must be smartly selected. The aim of the present study was to evaluate the effect of lactate and diacetate on the high pressure processing (HPP) inactivation of three L. monocytogenes strains (CTC1011, CTC1034 and Scott A) in sliced cooked ham. Inoculated vacuum-packed slices of cooked ham formulated without organic acids and with lactate, diacetate or the combination of both were pressurized at 400 MPa for different holding times and the inactivation kinetics were characterised by fitting primary and secondary models. The shape of the inactivation curves for L. monocytogenes depended on both product formulation and strain. Interestingly, lactate caused a dose-dependent piezo-protection in all three strains, as the HPP inactivation rate decreased in cooked ham formulated with increasing amounts of lactate and in comparison with the control product. The design, validation and implementation of HPP requires a tailor-made approach, considering product formulation and selection of strain/s.

Factors Affecting Microbial Inactivation during High Pressure Processing in Juices and Beverages: A Review

ABSTRACT

The purpose of this article is to review and discuss the factors affecting high pressure processing (HPP) in juices and beverages. The inactivation of microorganisms by HPP depends on numerous factors, including the magnitude of the pressure and the holding time, process temperature, compression and decompression rates, the microbiota, and the intrinsic properties of juices and beverages. Although extensive HPP research has been performed to characterize many of these factors, a number of issues, such as the rates of compression and decompression, still remain unresolved and need further investigation. In addition, some published results are conflicting and do not provide enough evidence to develop juice HPP "safe-harbor" parameters to achieve a minimum 5-log reduction of the pertinent microorganism and produce safe fruit juices and beverages.

HIGHLIGHTS

Comparative Effects of Thermal, High Hydrostatic Pressure, and UV-C Processing on the Quality, Nutritional Attributes, and Inactivation of Escherichia coli, Salmonella, and Listeria Introduced into Tiger Nut Milk

HIGHLIGHTS

Thermal and nonthermal methods can support a 5-log CFU reduction of model bacteria introduced into tiger nut milk. Thermal treatment of tiger nut milk results in significant loss of protein, antioxidants, and quality properties. HHP or UV-C treatment of tiger nut milk retains quality and nutritional characteristics. HHP or UV-C are suitable for the pasteurization of tiger nut milk.

Resistance of Listeria monocytogenes to Stress Conditions Encountered in Food and Food Processing Environments

Listeria monocytogenes is a human food-borne facultative intracellular pathogen that is resistant to a wide range of stress conditions. As a consequence, L. monocytogenes is extremely difficult to control along the entire food chain from production to storage and consumption. Frequent and recent outbreaks of L. monocytogenes infections illustrate that current measures of decontamination and preservation are suboptimal to control L. monocytogenes in food. In order to develop efficient measures to prevent contamination during processing and control growth during storage of food it is crucial to understand the mechanisms utilized by L. monocytogenes to tolerate the stress conditions in food matrices and food processing environments. Food-related stress conditions encountered by L. monocytogenes along the food chain are acidity, oxidative and osmotic stress, low or high temperatures, presence of bacteriocins and other preserving additives, and stresses as a consequence of applying alternative decontamination and preservation technologies such high hydrostatic pressure, pulsed and continuous UV light, pulsed electric fields (PEF). This review is aimed at providing a summary of the current knowledge on the response of L. monocytogenes toward these stresses and the mechanisms of stress resistance employed by this important food-borne bacterium. Circumstances when L. monocytogenes cells become more sensitive or more resistant are mentioned and existence of a cross-resistance when multiple stresses are present is pointed out.

New insights on Listeria monocytogenes growth in pressurised cooked ham: A piezo-stimulation effect enhanced by organic acids during storage

The aim of the present study was to understand growth and survival responses of Listeria monocytogenes during the storage of high pressure processed (HPP) cooked ham formulated with organic acids to inhibit growth of the pathogen. Cooked ham batches were manufactured without organic acids (control), with potassium lactate (2.8% or 4%) or with potassium lactate and sodium diacetate (2.0% + 0.11% or 2.0% + 0.45%). Products were aseptically sliced and inoculated with 10⁷ cfu/g or 10² cfu/g of either L. monocytogenes CTC1034 (a meat isolate) or a cocktail of three isolates (12MOB045Lm, 12MOB089Lm and Scott A). Vacuum-packed samples with 10⁷ cfu/g were HPP at 600 MPa for 3 min, whereas samples with 10² cfu/g were not HPP. Growth or survival of L. monocytogenes was determined during subsequent storage at 8, 12 and 20 °C. Growth or survival was characterized by fitting the experimental data using the primary logistic model and the log-linear with shoulder model, respectively. Secondary models were fitted to characterize the effect of temperature on growth kinetic parameters without or with HPP. For cooked ham without organic acids, growth rates of L. monocytogenes were slightly increased by HPP and lag times were longer. Interestingly, for cooked ham with organic acids, the HPP had a significant stimulating effect on subsequent growth of L. monocytogenes (piezo-stimulation). At 20 °C, the growth rates of L. monocytogenes in cooked ham with lactate were up to 4-fold higher than those of the same product without HPP. The observed enhancement of the piezo-stimulating effect of organic acids on growth rates during storage of HPP cooked ham represents a challenge for the use of organic acids as antimicrobials in these products. A predictive model available as part of the Food Spoilage and Safety Predictor (FSSP) software seemed useful to predict growth and growth boundary of L. monocytogenes in non-pressurised cooked ham. This model was calibrated to take into account the observed piezo-stimulating effect and to predict growth of L. monocytogenes in HPP cooked ham with organic acids.

Severely Heat Injured Survivors of E. coli O157:H7 ATCC 43888 Display Variable and Heterogeneous Stress Resistance Behavior

Although minimal food processing strategies aim to eliminate foodborne pathogens and spoilage microorganisms through a combination of mild preservation techniques, little is actually known on the resistance behavior of the small fraction of microorganisms surviving an inimical treatment. In this study, the conduct of severely heat stressed survivors of E. coli O157:H7 ATCC 43888, as an indicator for the low infectious dose foodborne enterohemorrhagic strains, was examined throughout their resuscitation and outgrowth. Despite the fact that these survivors were initially sublethally injured, they were only marginally more sensitive to a subsequent heat treatment and actually much more resistant to a subsequent high hydrostatic pressure (HHP) shock in comparison with unstressed control cells. Throughout further resuscitation, however, their initial HHP resistance rapidly faded out, while their heat resistance increased and surpassed the initial heat resistance of unstressed control cells. Results also indicated that the population eventually emerging from the severely heat stressed survivors heterogeneously consisted of both growing and non-growing cells. Together, these observations provide deeper insights into the particular behavior and heterogeneity of stressed foodborne pathogens in the context of food preservation.

Modeling and Validation of the Ecological Behavior of Wild-Type Listeria monocytogenes and Stress-Resistant Variants

Listeria monocytogenes exhibits a heterogeneous response upon stress exposure which can be partially attributed to the presence of stable stress-resistant variants. This study aimed to evaluate the impact of the presence of stress-resistant variants of Listeria monocytogenes and their corresponding trade-offs on population composition under different environmental conditions. A set of stress robustness and growth parameters of the wild type (WT) and an rpsU deletion variant was obtained and used to model their growth behavior under combined mild stress conditions and to model their kinetics under single- and mixed-strain conditions in a simulated food chain. Growth predictions for the WT and the rpsU deletion variant matched the experimental data generally well, although some deviations from the predictions were observed. The data highlighted the influence of the environmental conditions on the ratio between the WT and variant. Prediction of performance in the simulated food chain proved to be challenging. The trend of faster growth and lower stress robustness for the WT than for the rpsU variant in the different steps of the chain was confirmed, but especially for the inactivation steps and the time needed to resume growth after an inactivation step, the experimental data deviated from the model predictions. This report provides insights into the conditions which can select for stress-resistant variants in industrial settings and discusses their potential persistence in food processing environments.

IMPORTANCE

Listeria monocytogenes exhibits a heterogeneous stress response which can partially be attributed to the presence of genetic variants. These stress-resistant variants survive better under severe conditions but have, on the other hand, a reduced growth rate. To date, the ecological behavior and potential impact of the presence of stress-resistant variants is not fully understood. In this study, we quantitatively assessed growth and inactivation behavior of wild-type L. monocytogenes and its stress-resistant variants. Predictions were validated under different conditions, as well as along a model food chain. This work illustrates the effects of environmental factors on population dynamics of L. monocytogenes and is a first step in evaluating the impact of population diversity on food safety.

Use of Pressure for Improving Storage Quality of Fresh-Cut Produce

The microflora of fresh-cut produce is comprised primarily of phytopathogenic and soilborne organisms, but the product could be contaminated with foodborne pathogens. Populations of bacteria, molds, and yeasts associated with fresh-cut produce decreased to non-detectable levels following a high pressure (HP) treatment of 400 MPa for 10 min at room temperature, except for spore-forming bacteria such as Bacillus spp. which were inactivated when subjected to 600 MPa at 60 °C for 10 min. The HP treatment of 400 MPa for 5-10 min at room temperature for fresh-cut lotus root and pineapple may be commercially feasible as an alternative to chemical sterilization and thermal blanching, respectively. The HP treatment reduced the epiphytic microorganisms of the products to non-detectable levels, and the microbial counts remained at the initial levels during storage at 1 °C with minimal changes in physicochemical and visual quality of the products. However, the HP treatment induced cellular disruption in plant tissue that contributed to the changes in appearance of several fresh-cut vegetables. To improve storage quality, combining lower pressures with complementary technologies should be useful for successful application of HP for other fresh-cut produce.

Diversity of acid stress resistant variants of Listeria monocytogenes and the potential role of ribosomal protein S21 encoded by rpsU

The dynamic response of microorganisms to environmental conditions depends on the behavior of individual cells within the population. Adverse environments can select for stable stress resistant subpopulations. In this study, we aimed to get more insight in the diversity within Listeria monocytogenes LO28 populations, and the genetic basis for the increased resistance of stable resistant fractions isolated after acid exposure. Phenotypic cluster analysis of 23 variants resulted in three clusters and four individual variants and revealed multiple-stress resistance, with both unique and overlapping features related to stress resistance, growth, motility, biofilm formation, and virulence indicators. A higher glutamate decarboxylase activity correlated with increased acid resistance. Whole genome sequencing revealed mutations in rpsU, encoding ribosomal protein S21 in the largest phenotypic cluster, while mutations in ctsR, which were previously shown to be responsible for increased resistance of heat and high hydrostatic pressure resistant variants, were not found in the acid resistant variants. This underlined that large population diversity exists within one L. monocytogenes strain and that different adverse conditions drive selection for different variants. The finding that acid stress selects for rpsU variants provides potential insights in the mechanisms underlying population diversity of L. monocytogenes.

Infectious causes of cholesteatoma and treatment of infected ossicles prior to reimplantation by hydrostatic high-pressure inactivation

Chronic inflammation, which is caused by recurrent infections, is one of the factors contributing to the pathogenesis of cholesteatoma. If reimplantation of autologous ossicles after a surgical intervention is intended, inactivation of planktonic bacteria and biofilms is desirable. High hydrostatic pressure treatment is a procedure, which has been used to inactivate cholesteatoma cells on ossicles. Here we discuss the potential inactivating effect of high hydrostatic pressure on microbial pathogens including biofilms. Recent experimental data suggest an incomplete inactivation at a pressure level, which is tolerable for the bone substance of ossicles and results at least in a considerable reduction of pathogen load. Further studies are necessary to access how far this quantitative reduction of pathogens is sufficient to prevent ongoing chronic infections, for example, due to forming of biofilms.

Genetic characterization of Listeria monocytogenes isolates from food processing facilities before and after postcook chiller heat treatment

Possible selection for and establishment of stress-resistant Listeria monocytogenes variants as a consequence of heating interventions is of concern to the food industry. Lineage analysis and multilocus variable number tandem repeat analysis (MLVA) was performed on 20 L. monocytogenes isolates, of which 15 were obtained before and 5 were obtained after heat treatment of a postcook meat chiller. The ctsR gene (a class III heat shock gene regulator) from 14 isolates was amplified and sequenced because previous work has indicated that spontaneous mutations can occur in this gene during heat treatment. Heat treatment of the meat chiller did not significantly change the relative abundance of the various L. monocytogenes lineages; lineage II strains (less-heat-resistant isolates) dominated both before and after heat treatment. MLVA typing confirmed that some isolates of L. monocytogenes occur both before and after heat treatment of the chiller. No isolate of L. monocytogenes indicated any likely functionally significant mutations in ctsR. This study indicates the absence of any obvious difference in the profiles of L. monocytogenes strains obtained before and after heat treatment of a meat chiller, based on the characteristics examined. Although this finding supports the effectiveness of heat treatment, the limited number of strains used and characteristics examined mean that further study on a larger scale is required before firm conclusions can be drawn.

Emergence of pulsed electric fields resistance in Salmonella enterica serovar Typhimurium SL1344

In this investigation we selected and isolated a culture derived from Salmonella enterica serovar Typhimurium SL1344 with stable increased resistance to pulsed electric fields (PEF) after repeated rounds of PEF treatment and outgrowth of survivors. The resulting culture showed a higher resistance to PEF treatments under different treatment conditions. The acquisition of PEF resistance was only observed in stationary phase cells. The cytoplasmic membrane of the resistant variant showed a higher resilience against PEF treatments, since a lower permeabilization degree was observed after PEF treatments, in comparison to the parental strain. Resistance to PEF was also accompanied by a higher tolerance to acidic pH, hydrogen peroxide and ethanol, but not to heat. The occurrence of a PEF resistant variant in S. enterica serovar Typhimurium SL1344 emphasizes the need to further study the mechanisms of inactivation and resistance by PEF for an adequate design of safe treatments.

Virulence aspects of Listeria monocytogenes LO28 high pressure-resistant variants

High pressure treatment is a novel food processing approach for reducing pathogens in foods and food ingredients. However, relatively little is known about the pathogenic potential of organisms that survive the treatment. Twelve previously isolated and characterized variants of Listeria monocytogenes LO28 obtained after a high pressure treatment were assessed for their virulence potential and antibiotic susceptibility. Ten variants showed attenuated virulence while two variants retained full virulence in a mouse model of infection. Seven of the attenuated variants demonstrated a reduction in virulence factor activity. Compared to the wild type, all variants exhibited similar or increased susceptibility to multiple antibiotics commonly used in listeriosis treatment.

Beyond celery and starter culture: advances in natural/organic curing processes in the United States

Over the past 10years there has been ongoing development of curing processes with natural ingredients designed to meet consumer demand and regulatory requirements for natural and organic processed meats. Initially, these processes utilized celery concentrates with a high nitrate content combined with a nitrate-reducing starter culture. Subsequent advances included celery concentrates with the nitrate converted to nitrite by suppliers. Further, as questions developed concerning reduced concentration of preservatives and the microbiological safety of these processed meats, additional advances have resulted in a wide variety of ingredients and processes designed to provide supplementary antimicrobial effects for improved product safety.

Effects of high hydrostatic pressure on bacterial growth on human ossicles explanted from cholesteatoma patients

BACKGROUND

High hydrostatic pressure (HHP) treatment can eliminate cholesteatoma cells from explanted human ossicles prior to re-insertion. We analyzed the effects of HHP treatment on the microbial flora on ossicles and on the planktonic and biofilm states of selected isolates.

METHODOLOGY

Twenty-six ossicles were explanted from cholesteatoma patients. Five ossicles were directly analyzed for microbial growth without further treatment. Fifteen ossicles were cut into two pieces. One piece was exposed to HHP of 350 MPa for 10 minutes. Both the treated and untreated (control) pieces were then assessed semi-quantitatively. Three ossicles were cut into two pieces and exposed to identical pressure conditions with or without the addition of one of two different combinations of antibiotics to the medium. Differential effects of 10-minute in vitro exposure of planktonic and biofilm bacteria to pressures of 100 MPa, 250 MPa, 400 MPa and 540 MPa in isotonic and hypotonic media were analyzed using two patient isolates of Staphylococcus epidermidis and Neisseria subflava. Bacterial cell inactivation and biofilm destruction were assessed by colony counting and electron microscopy.

PRINCIPAL FINDINGS

A variety of microorganisms were isolated from the ossicles. Irrespective of the medium, HHP treatment at 350 MPa for 10 minutes led to satisfying but incomplete inactivation especially of gram-negative bacteria. The addition of antibiotics increased the efficacy of elimination. A comparison of HHP treatment of planktonic and biofilm cells showed that the effects of HPP were reduced by about one decadic logarithmic unit when HPP was applied to biofilms. High hydrostatic pressure conditions that are suitable to inactivate cholesteatoma cells fail to completely sterilize ossicles even if antibiotics are added. As a result of the reduced microbial load and the viability loss of surviving bacteria, however, there is a lower risk of re-infection after re-insertion.

Data analysis of the inactivation of foodborne microorganisms under high hydrostatic pressure to establish global kinetic parameters and influencing factors

The inactivation rate of foodborne microorganisms under high hydrostatic pressure (HHP) is influenced by factors such as substrate, species, strain, temperature, pH, and stage of growth of the cell. In this study, 445 D(P)-values from previously published data were analyzed, including those from bacterial spores, vegetative cells, and yeasts. Three secondary linear inactivation models with pressure and/or temperature as process parameters were tested to estimate global log D(P)-, z(P)-, and z(T)-values, and the influence of these parameters and additional factors was assessed. The results show that significant differences in microbial resistance are mainly the result of temperature, highlighting the need for its inclusion as a process parameter. Perhaps due to the large number of data and very distinct factors, the remaining factors showed no significant differences in microbial resistance, except in the case of Clostridium spp. in soy milk, which showed decreased resistance in this substrate compared with its behavior in other products. These results serve to establish priorities among factors influencing HHP inactivation and to estimate global kinetic parameters as a basis for setting target levels of inactivation. Moreover, they can be used as a benchmark for comparison of microbial HHP inactivation data gathered in future studies.

Isolation of highly heat-resistant Listeria monocytogenes variants by use of a kinetic modeling-based sampling scheme

Stable high-hydrostatic-pressure (HHP)-resistant Listeria monocytogenes LO28 variants were previously isolated and characterized. These HHP variants were also more resistant to heat. In addition, nonlinear heat inactivation kinetics pointed toward the existence of heat-resistant variants, although these could not be isolated so far. In this study, we used kinetic modeling of inactivation curves of two isolated HHP variants and their wild type, and this revealed that the probability of finding resistant variants should depend on the nature of the inactivation treatment and the time of exposure. At specific heat and HHP conditions, resistant LO28 and EGDe variants were indeed isolated. Resistant LO28 variants were even isolated after a heat inactivation at 72°C in milk, and these variants showed high resistance to standard pasteurization conditions. The increased resistance of part of the isolated LO28 and EGDe variants was due to mutations in their ctsR genes. For the variants whose ctsR genes and upstream regions were not altered, the mechanisms leading to increased resistance remain to be elucidated. This research showed the strength of kinetic modeling in unraveling the causes of nonlinear inactivation and facilitating the isolation of heat-resistant L. monocytogenes variants.

Novel listerial genetic loci conferring enhanced barotolerance in Escherichia coli

AIMS

To identify Listeria monocytogenes genes with a role in high-pressure (HP) resistance.

METHODS AND RESULTS

A L. monocytogenes genomic library constructed in an Escherichia coli background was screened for loci conferring increased HP resistance. Pressure treatments at 400 megapascals for 5 min in Luria-Bertani (LB) agar were used to screen for increased resistance to pressure. Colonies arising on the treated agar plates were isolated, the plasmid extracted and the inserts sequenced to identify the genetic loci conferring HP resistance. Seven different genetic regions were identified, which encoded proteins similar to an inorganic polyphosphate/ATP-NAD kinase, the septation ring formation regulator EzrA, flagellar motor proteins MotA and MotB, proteins similar to the quorum sensing Agr system from Staphylococcus (AgrA, AgrC and AgrD), proteins similar to a transcription regulator (RpiR family) and a fructose phosphotransferase system, proteins of unknown function, and a Fur regulator. Of the seven loci confirmed, three (EzrA, MotA/B and the Agr system) maintained significantly reproducible HP tolerance when expressed in a different E. coli background.

CONCLUSIONS

Novel genetic loci from the L. monocytogenes genome confer increased HP resistance when heterologously expressed in an E. coli background.

SIGNIFICANCE AND IMPACT OF THE STUDY

Molecular and functional approaches to the screening of genetic elements linked to HP resistance provide greater insights into microbial inactivation and/or survival mechanisms when using HP as a means of controlling/eliminating bacterial growth. This information will ultimately have significant implications for the use of HP processing in the food industry, in terms of both food quality and safety.

Population diversity of Listeria monocytogenes LO28: phenotypic and genotypic characterization of variants resistant to high hydrostatic pressure

A comparative phenotype analysis of 24 Listeria monocytogenes LO28 stress-resistant variants obtained after high-pressure treatment was performed to assess their robustness and growth performance under a range of food-relevant conditions. In addition, genetic analysis was conducted to characterize the promoter regions and open reading frames of the class I and III transcriptional repressors CtsR and HrcA, which control production of specific sets of stress proteins. Analysis of stress survival capacity, motility, biofilm formation, and growth under various conditions showed all variants to be more resistant to pressure and heat than the wild type; however, differences among variants were observed in acid resistance, growth rate, motility, and biofilm-forming capacity. Genetic analysis revealed no variation in the genetic make-up of hrcA and its upstream region, but two variants had deletions in the upstream region of ctsR and seven variants had mutations in the ctsR gene itself. The results of the characterization were cluster analyzed to obtain insight into the diversity of variants. Ten unique variants and three clusters with specific features could be identified: one cluster consisting of seven variants having a mutation in the CtsR regulator gene, one cluster containing two variants with an aerobic biofilm formation capacity similar to that of the wild type, and a cluster composed of five immotile variants. The large population diversity of L. monocytogenes stress-resistant variants signifies the organism's genetic flexibility, which in turn may contribute to the survival and persistence of this human pathogen in food-processing environments.