Transfer of Bacillus cereus spores from packaging paper into food

Fiber-based food packaging materials in view of bacterial growth and survival capacities

Understanding interactions of bacteria with fiber-based packaging materials is fundamental for appropriate food packaging. We propose a laboratory model to evaluate microbial growth and survival in liquid media solely consisting of packaging materials with different fiber types. We evaluated food contaminating species (Escherichia coli, Staphylococcus aureus, Bacillus cereus), two packaging material isolates and bacterial endospores for their growth abilities. Growth capacities differed substantially between the samples as well as between bacterial strains. Growth and survival were strongest for the packaging material entirely made of recycled fibers (secondary food packaging) with up to 10.8 log₁₀ CFU/ml for the packaging isolates. Among the food contaminating species, B. cereus and E. coli could grow in the sample of entirely recycled fibers with maxima of 6.1 log₁₀ and 8.6 log₁₀ CFU/mL, respectively. Escherichia coli was the only species that was able to grow in bleached fresh fibers up to 7.0 log₁₀ CFU/mL. Staphylococcus aureus perished in all samples and was undetectable after 1-6 days after inoculation, depending on the sample. The packaging material strains were isolated from recycled fibers and could grow only in samples containing recycled fibers, indicating an adaption to this environment. Spores germinated only in the completely recycled sample. Additionally, microbial digestion of cellulose and xylan might not be a crucial factor for growth. This is the first study describing bacterial growth in food packaging materials itself and proposing functionalization strategies toward active food packaging through pH-lowering.

Modelling and Determination of Parameters Influencing the Transfer of Microorganisms from Food Contact Materials

The transfer of microorganisms on packaging materials to a contact surface has only been investigated in the context of laboratory-produced spiked packaging products and agar surfaces in small quantities (0.03–0.10%) so far. Correspondingly, this study focused on the localization of microorganisms on/in industrially produced packaging materials and on the establishment of an experimental laboratory set-up to determine and quantify the parameters influencing the microbial transport from surfaces and different layers of packaging materials to contact agar media. We established a simple model to determine the transfer of microorganisms from packaging materials to microbiological agar plates. In order to clarify the transfer of microorganisms within the material, the samples were split horizontally in their z-dimension, and so produced layers (inner layers) were investigated for their microbial transfer. The parameters incubation time, applied weight and bacterial load for the samples were investigated in more detail in the outer layers (front/back) and the inner layers. No significant difference in the microbial transfer was observed between the outer and inner layers of all samples. We indicate a time-dependent transfer to the media and an independence of the transfer from the applied weight. Moreover, the number of transferred microorganisms is not dependent on the bacterial load of the samples.

Bacillus cereus in Packaging Material: Molecular and Phenotypical Diversity Revealed

The Bacillus cereus group has been isolated from soils, water, plants and numerous food products. These species can produce a variety of toxins including several enterotoxins [non-hemolytic enterotoxin (Nhe), hemolysin BL (Hbl), cytotoxin K, and enterotoxin FM], the emetic toxin cereulide and insecticidal Bt toxins. This is the first study evaluating the presence of B. cereus in packaging material. Among 75 different isolates, four phylogenetic groups were detected (II, III, IV, and VI), of which the groups III and IV were the most abundant with 46.7 and 41.3%, respectively. One isolate was affiliated to psychrotolerant group VI. Growth experiments showed a mesophilic predominance. Based on PCR analysis, nhe genes were detectable in 100% of the isolates, while hbl genes were only found in 50.7%. The cereulide encoding gene was found in four out of 75 isolates, no isolate carried a crystal toxin gene. In total, thirteen different toxin gene profiles were identified. We showed that a variety of B. cereus group strains can be found in packaging material. Here, this variety lies in the presence of four phylogenetic groups, thirteen toxin gene profiles, and different growth temperatures. The results suggest that packaging material does not contain significant amounts of highly virulent strains, and the low number of cereulide producing strains is in accordance with other results.

Saving costs through the decontamination of the packaging of unused medical supplies using hydrogen peroxide vapor

OBJECTIVE. Individually packaged sterile supply items may become contaminated and act as vectors for nosocomial transmission of multidrug-resistant organisms (MDROs). Thus, many hospitals have a policy to dispose of these unused, packaged supply items at patient discharge from the hospital, which has considerable cost implications. We evaluated the frequency of contamination of these items, the efficacy of hydrogen peroxide vapor (HPV) in disinfecting them, and costs associated with discarded supplies. DESIGN. Before-after study. METHODS. A pilot study was performed in the rooms of 20 patients known to be colonized or infected with vancomycin-resistant enterococci (VRE), and a follow-up study was performed in an additional 20 rooms of patients under precautions for various MDROs in 6 high-risk units. Five pairs of supply items were selected. One item of each pair was sampled without exposure to HPV, and the other was sampled after HPV exposure. The cost of discarded supplies was calculated by examining stock lists of supplies stored on the study units. RESULTS. Seven (7%) of 100 items were contaminated with VRE in the pilot study, and 9 (9%) of 100 items were contaminated with MDROs in the follow-up study. None of the items were contaminated after exposure to HPV (P < .02 in both the pilot and the follow-up study). The annual cost of supplies discarded at patient hospital discharge was $387,055. This figure does not include the cost of waste disposal and is therefore likely to be an underestimation of the financial burden. CONCLUSIONS. HPV effectively disinfected the packaging of supply items, which could generate considerable financial and environmental benefits.

Failure Mode and Effect Analysis (FMEA) for confectionery manufacturing in developing countries: Turkish delight production as a case study

The Failure Mode and Effect Analysis (FMEA) was applied for risk assessment of confectionary manufacturing, in whichthe traditional methods and equipment were intensively used in the production. Potential failure modes and effects as well as their possible causes were identified in the process flow. Processing stages that involve intensive handling of food by workers had the highest risk priority numbers (RPN = 216 and 189), followed by chemical contamination risks in different stages of the process. The application of corrective actions substantially reduced the RPN (risk priority number) values. Therefore, the implementation of FMEA (The Failure Mode and Effect Analysis) model in confectionary manufacturing improved the safety and quality of the final products.

Cereulide produced by Bacillus cereus increases the fitness of the producer organism in low-potassium environments

Cereulide, produced by certain Bacillus cereus strains, is a lipophilic cyclic peptide of 1152 Da that binds K(+) ions with high specificity and affinity. It is toxic to humans, but its role for the producer organism is not known. We report here that cereulide operates for B. cereus to scavenge potassium when the environment is growth limiting for this ion. Cereulide-producing B. cereus showed higher maximal growth rates (µ(max)) than cereulide non-producing B. cereus in K(+)-deficient medium (K(+) concentration ~1 mM). The cereulide-producing strains grew faster in K(+)-deficient than in K(+)-rich medium with or without added cereulide. Cereulide non-producing B. cereus neither increased µ(max) in K(+)-deficient medium compared with K(+)-rich medium, nor benefited from added cereulide. Cereulide-producing strains outcompeted GFP-labelled Bacillus thuringiensis in potassium-deficient (K(+) concentration ~1 mM) but not in potassium-rich (K(+) concentration ~30 mM) medium. Exposure to 2 µM cereulide in potassium-free medium lacking an energy source caused, within seconds, a major efflux of cellular K(+) from B. cereus not producing cereulide as well as from Bacillus subtilis. Cereulide depleted the cereulide non-producing B. cereus and B. subtilis cells of a major part of their K(+) stores, but did not affect cereulide-producing B. cereus strains. Externally added 6-10 µM cereulide triggered the generation of biofilms and pellicles by B. cereus. The results indicate that both endogenous and externally accessible cereulide supports the fitness of cereulide-producing B. cereus in environments where the potassium concentration is low.

Sonochemical coating of paper by microbiocidal silver nanoparticles

Colloidal silver has gained wide acceptance as an antimicrobial agent, and various substrates coated with nanosilver such as fabrics, plastics, and metal have been shown to develop antimicrobial properties. Here, a simple method to develop coating of colloidal silver on paper using ultrasonic radiation is presented, and the coatings are characterized using X-ray diffraction (XRD), high resolution scanning electron microscope (HRSEM), and thermogravimetry (TGA) measurements. Depending on the variables such as precursor concentrations and ultrasonication time, uniform coatings ranging from 90 to 150 nm in thickness have been achieved. Focused ion beam (FIB) cross section imaging measurements revealed that silver nanoparticles penetrated the paper surface to a depth of more than 1 μm, resulting in highly stable coatings. The coated paper demonstrated antibacterial activity against E. coli and S. aureus, suggesting its potential application as a food packing material for longer shelf life.

Extended and global phylogenetic view of the Bacillus cereus group population by combination of MLST, AFLP, and MLEE genotyping data

The Bacillus cereus group of bacteria includes species that can cause food-poisoning or spoilage, such as B. cereus, as well as Bacillus anthracis, the cause of anthrax. In the present report we have conducted a multi-datatype analysis using tools from the HyperCAT database (http://mlstoslo.uio.no/) that we recently developed, combining data from multilocus sequence typing (Tourasse et al., 2010), amplified fragment length polymorphism, and multilocus enzyme electrophoresis typing techniques. We provide a comprehensive snapshot of the B. cereus group population, incorporating 2213 isolates including 450 from food and dairy products, in the form of both phylogenetic supertrees and superclusters of genetically closely related isolates. Our main findings include the detection of phylogenetically separated groups of isolates possibly representing novel evolutionary lineages within the B. cereus group, a putative new branch of B. anthracis, as well as new groups of related strains containing both environmental and clinical isolates. In addition, the multi-datatype analysis revealed to a larger extent than previously recognized that food-borne isolates can share identical genotyping profiles with strains from various other origins. Altogether, the global analysis confirms and extends the results underlining the opportunistic nature of B. cereus group organisms, and the fact that isolates responsible for disease outbreaks and contamination of foodstuffs can originate from various genetic backgrounds.