Quantitative transfer of Escherichia coli O157:H7 to equipment during small-scale production of fresh-cut leafy greens

Durable superhydrophobic coatings for stainless-steel: An effective defense against Escherichia coli and Listeria fouling in the post-harvest environment

Increasing concerns revolve around bacterial cross-contamination of leafy green vegetables via food-contact surfaces. Given that stainless-steel is among the commonly used food-contact surfaces, this study reports a coating strategy enhancing its hygiene and microbiological safety through an antifouling approach via superhydrophobicity. The developed method involves growing a nickel-nanodiamond nanocomposite film on 304 stainless-steel via electroplating and sequential functionalization of the outer surface layer with nonpolar organosilane molecules via polydopamine moieties. The resultant superhydrophobic stainless-steel surfaces had a static water contact angle of 156.3 ± 1.9° with only 2.3 ± 0.5° contact angle hysteresis. Application of the coating to stainless-steel was demonstrated to yield 2.3 ± 0.6 log10 and 2.0 ± 0.9 log10 reductions in the number of adherent gram-negative Escherichia coli O157:H7 and gram-positive Listeria innocua cells, respectively. These population reductions were shown to be statistically significant (α = 0.05). Coated stainless-steel also resisted fouling when contacted with contaminated romaine lettuce leaves and maintained significant non-wetting character when abraded with sand or contacted with high concentration surfactant solutions. The incorporation of superhydrophobic stainless-steel surfaces into food processing equipment used for washing and packaging leafy green vegetables has the potential to mitigate the transmission of pathogenic bacteria within food production facilities.

Quantitative risk assessment-epidemic curve prediction model for leafy green outbreak investigation

The objective of this study was to leverage quantitative risk assessment to investigate possible root cause(s) of foodborne illness outbreaks related to Shiga toxin-producing Escherichia coli O157:H7 (STEC O157) infections in leafy greens in the United States. To this end, we developed the FDA leafy green quantitative risk assessment epidemic curve prediction model (FDA-LG QRA-EC) that simulated the lettuce supply chain. The model was used to predict the number of reported illnesses and the epidemic curve associated with lettuce contaminated with STEC O157 for a wide range of scenarios representing various contamination conditions and facility processing/sanitation practices. Model predictions were generated for fresh-cut and whole lettuce, quantifying the differing impacts of facility processing and home preparation on predicted illnesses. Our model revealed that the timespan (i.e., number of days with at least one reported illness) and the peak (i.e., day with the most predicted number of reported illnesses) of the epidemic curve of a STEC O157-lettuce outbreak were not strongly influenced by facility processing/sanitation practices and were indications of contamination pattern among incoming lettuce batches received by the facility or distribution center. Through comparisons with observed number of illnesses from recent STEC O157-lettuce outbreaks, the model identified contamination conditions on incoming lettuce heads that could result in an outbreak of similar size, which can be used to narrow down potential root cause hypotheses.

Psychrotrophic Bacteria Equipped with Virulence and Colonization Traits Populate the Ice Cream Manufacturing Environment

Several microbial taxa have been associated with food processing facilities, and they might resist by attaching on tools and equipment even after sanitation procedures, producing biofilms that adhere to the surfaces and might embed other microorganisms, including spoilers and pathogens. There is increasing evidence that these communities can be transferred to the final product. To explore the microbial contamination routes in a facility producing ice creams, we collected foods and environmental swabs from industrial surfaces of equipment and tools and performed taxonomic and functional analyses of the microbial DNA extracted from the environmental samples. Our results suggest that complex communities dominated by psychrotrophic bacteria (e.g., Pseudomonas and Acinetobacter spp.) inhabit the food processing environment, and we demonstrate that these communities might be transferred from the surfaces to the products. Functional analysis performed on environmental samples highlighted the presence of several genes linked to antimicrobial resistance and adherence on abiotic surfaces; such genes were more abundant on food contact (FC) than on other surfaces. Metagenome-assembled genomes (MAGs) of Pseudomonas stutzeri showed genes linked with biofilm formation and motility, which are surely linked to colonizing capabilities in the processing lines. The study highlights clear potential advantages of applying microbiome mapping in the food industry for source tracking of microbial contamination and for planning appropriate ad hoc sanitization strategies. IMPORTANCE Several microbial species might permanently establish in food processing facilities, thus contributing to food loss. In fact, food contact surfaces might transfer microorganisms to intermediates and products, potentially representing a hazard to human health. In this work, we provide evidence of the existence of complex microbial communities overcoming sanitation in an ice cream-producing facility. These communities harbored several genes that could potentially lead to attachment to surfaces and antimicrobial resistance. Also, prediction of routes of contamination showed that several potential spoilage taxa might end up in the final product. Importantly, in this work, we show that mapping the environmental microbiome is a high-resolution technique that might help food business operators ensure food quality and safety through detection of potentially hazardous microorganisms.

Persistence of Silver Nanoparticles Sorbed on Fresh-Cut Lettuce during Flume Washing and Centrifugal Drying

Increased agricultural use of silver nanoparticles (Ag NPs) may potentially lead to residual levels on fresh produce, raising food safety and public health concerns. However, the ability of typical washing practices to remove Ag NPs from fresh produce is poorly understood. This study investigated the removal of Ag NPs from Ag NP-contaminated lettuce during bench-top and pilot-scale washing and drying. Ag NP removal was first assessed by washing lettuce leaves in a 4-L carboy batch system using water containing chlorine (100 mg/L) or peroxyacetic acid (80 mg/L) with and without a 2.5% organic load and water alone as the control. Overall, these treatments removed only 3-7% of the sorbed Ag from the lettuce. Thereafter, Ag NP-contaminated lettuce leaves were flume-washed for 90 s in a pilot-scale processing line using ∼600 L of recirculating water with or without a chlorine-based sanitizer (100 mg/L) and then centrifugally dried. After processing, only 0.3-3% of the sorbed Ag was removed, probably due to the strong binding of Ag with plant organic materials. Centrifugation only removed a minor amount of Ag as compared to flume washing. However, the Ag concentration in the ∼750 mL of centrifugation water was much higher as compared to the flume water, suggesting that the centrifugation water would be preferred when assessing fresh-cut leafy greens for Ag contamination. These findings indicate that Ag NPs may persist on contaminated leafy greens with commercial flume washing systems unable to substantially reduce Ag NP levels.

Monitoring of transfer and internalization of Escherichia coli from inoculated knives to fresh cut cucumbers (Cucumis sativus L.) using bioluminescence imaging

Slicing may cause the risk of cross-contamination in cucumber. In this study, knife inoculated with Escherichia coli (E. coli) was used to cut cucumbers, bioluminescence imaging (BLI) was used to visualize the possible distribution and internalization of E. coli during cutting and storage. Results showed that the initial two slices resulted in greater bacterial transfer. The bacterial transfer exhibited a fluctuating decay trend, E. coli was most distributed at the initial cutting site. The contaminated area on the surface of cucumber slices decreased during the storage period, which can be attributed to the death and internalization of E. coli. The maximum internalization distance of E. coli was about 2–3 mm, and did not further spread after 30 min from inoculation. Hence, our results provide useful information for risk management in both home and industrial environment.

Recent developments in antimicrobial and antifouling coatings to reduce or prevent contamination and cross-contamination of food contact surfaces by bacteria

Illness as the result of ingesting bacterially contaminated foodstuffs represents a significant annual loss of human quality of life and economic impact globally. Significant research investment has recently been made in developing new materials that can be used to construct food contacting tools and surfaces that might minimize the risk of cross-contamination of bacteria from one food item to another. This is done to mitigate the spread of bacterial contamination and resultant foodborne illness. Internet-based literature search tools such as Web of Science, Google Scholar, and Scopus were utilized to investigate publishing trends within the last 10 years related to the development of antimicrobial and antifouling surfaces with potential use in food processing applications. Technologies investigated were categorized into four major groups: antimicrobial agent-releasing coatings, contact-based antimicrobial coatings, superhydrophobic antifouling coatings, and repulsion-based antifouling coatings. The advantages for each group and technical challenges remaining before wide-scale implementation were compared. A diverse array of emerging antimicrobial and antifouling technologies were identified, designed to suit a wide range of food contact applications. Although each poses distinct and promising advantages, significant further research investment will likely be required to reliably produce effective materials economically and safely enough to equip large-scale operations such as farms, food processing facilities, and kitchens.

Outbreaks of Escherichia coli O157:H7 Infections Linked to Romaine Lettuce in Canada from 2008 to 2018: An Analysis of Food Safety Context

ABSTRACT

Foodborne diseases are a major cause of illness in Canada. One of the main pathogens causing cases and outbreaks of foodborne illness in Canada is Escherichia coli O157:H7. From 2008 to 2018, 11 outbreaks of E. coli O157:H7 infection in Canada were linked to leafy greens, including 7 (63.6%) linked to romaine lettuce, 2 (18.2%) linked to iceberg lettuce, and 2 (18.2%) linked to other or unspecified types of leafy greens. The consumption of lettuce in Canada, the behavior of E. coli O157:H7 on lettuce leaves, and the production practices used for romaine and iceberg lettuce do not seem to explain why a higher number of outbreaks of E. coli O157:H7 infection were linked to romaine than to iceberg lettuce. However, the difference in the shape of iceberg and romaine lettuce heads could be an important factor. Among the seven outbreaks linked to romaine lettuce in Canada between 2008 and 2018, an eastern distribution of cases was observed. Cases from western provinces were reported only twice. The consumption of romaine and iceberg lettuce by the Canadian population does not seem to explain the eastern distribution of cases observed, but the commercial distribution, travel distances, and the storage practices used for lettuce may be important factors. In the past 10 years, the majority of the outbreaks of E. coli O157:H7 infection linked to romaine lettuce occurred during the spring (March to June) and fall (September to December). The timing of these outbreaks may be explained by the availability of lettuce in Canada, the growing region transition periods in the United States, and the seasonality in the prevalence of E. coli O157:H7. The consumption of romaine lettuce by the Canadian population does not explain the timing of the outbreaks observed.

HIGHLIGHTS

Influence of physical variables on the transfer of Salmonella Typhimurium LT2 between potato (Solanum tuberosum) and stainless steel via static and dynamic contact

Bacterial cross-contamination between foods and contact surfaces can increase food safety risk; however, these processes are not well described in terms of fundamental variables. The objective was to determine the effect of sliding speed (3.75, 5.00, or 7.75 mm/s), contact time (5 or 40 s), normal pressure (~1217 to 8869 Pa), and number of sequential contacts on bacterial transfer to/from potato samples and stainless steel surfaces. Potato samples (~11 g, 3 × 3 × 1 cm) were either pulled across a stainless steel plate inoculated with Salmonella Typhimurium LT2 (~6.23 Log CFU/cm²) (dynamic contact) or placed on the inoculated plate for multiple sequential contacts on uninoculated squares (static contact). Salmonella on the potato and steel plate then were quantified by plating on modified trypticase soy agar. Bacterial transfer increased with increasing sliding speed (P = 0.0098) in dynamic tests and with contact time (P < 0.0001) in static tests. Salmonella on the inoculated potatoes decreased (P < 0.0001) from ~6.5 to ~5.5 Log CFU after 18 sequential static contacts with stainless steel. Reporting transfer results based on fundamental variables will improve the overall impact of bacterial transfer research on equipment design, cleaning/sanitation strategies, and overall food safety.

Effectiveness of a peracetic acid solution on Escherichia coli reduction during fresh-cut lettuce processing at the laboratory and industrial scales

Fresh leafy greens like lettuce can be consumed raw and are susceptible to foodborne pathogens if they become contaminated. Recently, the number of reported pathogenic foodborne outbreaks related to leafy greens has increased. Therefore, it is important to try to alleviate the human health burden associated with these outbreaks. Processing of fresh-cut lettuce, including washing, is a step in the supply chain that needs to be well controlled to avoid cross-contamination. Current measures to control the quality of lettuce during washing include the use of chemicals like chlorine; however, questions regarding the safety of chlorine have prompted research for alternative solutions with peracetic acid (PAA). This study evaluates the effectiveness of a PAA (c.a. 75 mg/L) solution on the reduction of a commensal E. coli strain during the washing of fresh-cut lettuce. Experiments were performed at the laboratory scale and validated at the industrial scale. We observed that the use of PAA was not adversely affected by the organic load in the water. The contact time and dose of the PAA showed to be relevant factors, as observed by the approximately 5-log reduction of E. coli in the water. Results showed that once introduced during washing, E. coli remained attached to the lettuce, thus supporting the need to control for pathogenic bacteria earlier in the supply chain (e.g., during primary production) as well as during washing. Moreover, our results showed that the use of PAA during washing did not have an apparent effect on the levels of fluorescent pseudomonads (FP) and total heterotrophic bacteria (THB) in lettuce. Overall, our results at the laboratory and industrial scales confirmed that during the processing of fresh-cut produce, where the accumulation of soil, debris, and other plant exudates can negatively affect washing, the use of a PAA (c.a. 75 mg/L) solution was an effective and safe wash water disinfectant that can potentially be used at the industrial scale.

Suitability of centrifuge water for detecting the presence of Escherichia coli versus finished fresh-cut lettuce testing

Fresh produce causes most foodborne outbreaks in the USA, and it is also considered a hazardous food product in other areas of the world such as Europe. The outbreaks attributed to fresh produce increase the focus of producers on hygiene to minimize exposure to food hazards. The fresh produce industry has the urgent need to detect if there are production lots contaminated with pathogenic microorganisms before distribution. Although the industry is mostly using end-product testing for the detection of target microorganisms, previous studies have evaluated the suitability of different sampling points within the production line of a fresh-cut processing plant. In the present study, the centrifuge effluent water was assessed as an alternative sampling point to end-product testing. E. coli was selected as an index microorganism of the presence of pathogens. The presence of E. coli was assessed in centrifuge effluent water, and fresh-cut lettuce from a commercial fresh-cut produce processing line (n = 95). The rate of false positives and negatives, as well as the specificity, sensitivity, and efficiency of the alternative method were calculated. The mean population of E. coli in positive water samples was 0.86 log cfu/100 mL, while the mean population of E. coli in positive fresh-cut lettuce samples was 0.23 log cfu/g. The proportion of positive samples in centrifuge effluent water and lettuce was similar (≈20%), and most of the results in both matrices were coincident (81.1%). However, the alternative method was not reliable due to its low sensitivity, as only 47.6% of the lettuce samples positive for E. coli could be matched with positive water samples.

Multistate Outbreaks of Foodborne Illness in the United States Associated With Fresh Produce From 2010 to 2017

In the United States, the consumption of fresh fruits and vegetables has increased during recent years as consumers seek to make healthier lifestyle choices. However, the number of outbreaks associated with fresh produce that involve cases in more than one state (multistate) has increased concomitantly. As the distance along the farm-to-fork continuum has lengthened over time, there are also more opportunities for fresh produce contamination with bacterial pathogens before it reaches the consumer. This review provides an overview of the three bacterial pathogens (i.e., pathogenic Escherichia coli, Listeria monocytogenes, and Salmonella enterica) associated with multistate fresh produce outbreaks that occurred between 2010 and 2017 in the U.S. Possible routes of fresh produce contamination, including pre- and post-harvest, are summarized and outcomes of selected outbreaks within this timeframe are highlighted. Eighty-five multistate outbreaks linked to fresh produce with a confirmed etiology occurred from 2010 to 2017. Cross-contamination within the distribution chain and poor agricultural practices, along with the production of sprouts and importation of fresh produce were frequently implicated contributors to these events. The evolution of the food supply chain in the U.S. necessitates an examination of multistate outbreaks to shed light on factors that increase the scale of these events.

Reaction of Surrogate Escherichia coli Serotype O157:H7 and Non-O157 Strains to Nutrient Starvation: Variation in Phenotype and Transcription of Stress Response Genes and Behavior on Lettuce Plants in the Field

Preharvest contamination with bacteria borne by irrigation water may result in leafy vegetables serving as vehicles for transmission of Shiga toxin-producing Escherichia coli (STEC) to humans. The influence of starvation-associated stress on the behavior of non-toxin-producing strains of E. coli serotype O157:H7 and serotypes O26, O103, O111, and O145 was examined subsequent to their introduction to the phyllosphere of field-grown romaine lettuce as inocula simulating starved (96 h in sterile deionized water) and nutrient-depleted (24 h broth culture) cells. As with E. coli O157:H7, leaf populations of the non-O157 strains declined rapidly during the first 72 h postinoculation, displaying the biphasic decay curve typical of serotype O157:H7 isolates. Preinoculation treatment appeared not to influence decay rates greatly (P > 0.5), but strain-specific differences (persistence period and attachment proficiency) indicated that serotype O103:H2 strain PARC445 was a better survivor. Also assessed was the impact of preinoculation treatment on phenotypes key to leaf colonization and survival and the expression of starvation stress-associated genes. The 96-h starvation period enhanced biofilm formation in one strain but reduced motility and autoinducer 2 formation in all five study strains relative to those characteristics in stationary-phase cells. Transcription of rpoS, dps, uspA, and gapA was reduced significantly (P < 0.05) in starvation-stressed cells relative to that for exponential- and stationary-phase cultures. Strain-specific differences were observed; serotype O103:H2 PARC445 had greater downturns than did serotype O157:H7 and other non-O157 strains. Within this particular cohort, the behavior of the representative serotype O157:H7 strain, PARC443 (ATCC 700728), was not predictive of behavior of non-O157 members of this STEC group.

A nano-carrier platform for the targeted delivery of nature-inspired antimicrobials using Engineered Water Nanostructures for food safety applications

Despite the progress in the area of food safety, foodborne diseases still represent a massive challenge to the public health systems worldwide, mainly due to the substantial inefficiencies across the farm-to-fork continuum. Here, we report the development of a nano-carrier platform, for the targeted and precise delivery of antimicrobials for the inactivation of microorganisms on surfaces using Engineered Water Nanostructures (EWNS). An aqueous suspension of an active ingredient (AI) was used to synthesize iEWNS, with the 'i' denoting the AI used in their synthesis, using a combined electrospray and ionization process. The iEWNS possess unique, active-ingredient-dependent physicochemical properties: i) they are engineered to have a tunable size in the nanoscale; ii) they have excessive electric surface charge, and iii) they contain both the reactive oxygen species (ROS) formed due to the ionization of deionized (DI) water, and the AI used in their synthesis. Their charge can be used in combination with an electric field to target them onto a surface of interest. In this approach, a number of nature-inspired antimicrobials, such as H₂O₂, lysozyme, citric acid, and their combination, were used to synthesize a variety of iEWNS-based nano-sanitizers. It was demonstrated through foodborne-pathogen-inactivation experiments that due to the targeted and precise delivery, and synergistic effects of AI and ROS incorporated in the iEWNS structure, a pico- to nanogram-level dose of the AI delivered to the surface using this nano-carrier platform is capable of achieving 5-log reductions in minutes of exposure time. This aerosol-based, yet 'dry' intervention approach using iEWNS nano-carrier platform offers advantages over current 'wet' techniques that are prevalent commercially, which require grams of the AI to achieve similar inactivation, leading to increased chemical risks and chemical waste byproducts. Such a targeted nano-carrier approach has the potential to revolutionize the delivery of antimicrobials for sterilization in the food industry.

Postharvest Supply Chain with Microbial Travelers: a Farm-to-Retail Microbial Simulation and Visualization Framework

Fresh produce supply chains present variable and diverse conditions that are relevant to food quality and safety because they may favor microbial growth and survival following contamination. This study presents the development of a simulation and visualization framework to model microbial dynamics on fresh produce moving through postharvest supply chain processes. The postharvest supply chain with microbial travelers (PSCMT) tool provides a modular process modeling approach and graphical user interface to visualize microbial populations and evaluate practices specific to any fresh produce supply chain. The resulting modeling tool was validated with empirical data from an observed tomato supply chain from Mexico to the United States, including the packinghouse, distribution center, and supermarket locations, as an illustrative case study. Due to data limitations, a model-fitting exercise was conducted to demonstrate the calibration of model parameter ranges for microbial indicator populations, i.e., mesophilic aerobic microorganisms (quantified by aerobic plate count and here termed APC) and total coliforms (TC). Exploration and analysis of the parameter space refined appropriate parameter ranges and revealed influential parameters for supermarket indicator microorganism levels on tomatoes. Partial rank correlation coefficient analysis determined that APC levels in supermarkets were most influenced by removal due to spray water washing and microbial growth on the tomato surface at postharvest locations, while TC levels were most influenced by growth on the tomato surface at postharvest locations. Overall, this detailed mechanistic dynamic model of microbial behavior is a unique modeling tool that complements empirical data and visualizes how postharvest supply chain practices influence the fate of microbial contamination on fresh produce.IMPORTANCE Preventing the contamination of fresh produce with foodborne pathogens present in the environment during production and postharvest handling is an important food safety goal. Since studying foodborne pathogens in the environment is a complex and costly endeavor, computer simulation models can help to understand and visualize microorganism behavior resulting from supply chain activities. The postharvest supply chain with microbial travelers (PSCMT) model, presented here, provides a unique tool for postharvest supply chain simulations to evaluate microbial contamination. The tool was validated through modeling an observed tomato supply chain. Visualization of dynamic contamination levels from harvest to the supermarket and analysis of the model parameters highlighted critical points where intervention may prevent microbial levels sufficient to cause foodborne illness. The PSCMT model framework and simulation results support ongoing postharvest research and interventions to improve understanding and control of fresh produce contamination.

A Mathematical Model for Pathogen Cross-Contamination Dynamics during the Postharvest Processing of Leafy Greens

We developed a probabilistic mathematical model for the postharvest processing of leafy greens focusing on Escherichia coli O157:H7 contamination of fresh-cut romaine lettuce as the case study. Our model can (i) support the investigation of cross-contamination scenarios, and (ii) evaluate and compare different risk mitigation options. We used an agent-based modeling framework to predict the pathogen prevalence and levels in bags of fresh-cut lettuce and quantify spread of E. coli O157:H7 from contaminated lettuce to surface areas of processing equipment. Using an unbalanced factorial design, we were able to propagate combinations of random values assigned to model inputs through different processing steps and ranked statistically significant inputs with respect to their impacts on selected model outputs. Results indicated that whether contamination originated on incoming lettuce heads or on the surface areas of processing equipment, pathogen prevalence among bags of fresh-cut lettuce and batches was most significantly impacted by the level of free chlorine in the flume tank and frequency of replacing the wash water inside the tank. Pathogen levels in bags of fresh-cut lettuce were most significantly influenced by the initial levels of contamination on incoming lettuce heads or surface areas of processing equipment. The influence of surface contamination on pathogen prevalence or levels in fresh-cut bags depended on the location of that surface relative to the flume tank. This study demonstrates that developing a flexible yet mathematically rigorous modeling tool, a "virtual laboratory," can provide valuable insights into the effectiveness of individual and combined risk mitigation options.

Transfer and Redistribution of Salmonella Typhimurium LT2 and Escherichia coli O157:H7 during Pilot-Scale Processing of Baby Spinach, Cilantro, and Romaine Lettuce

Several outbreaks of foodborne illness traced to leafy greens and culinary herbs have been hypothesized to involve cross-contamination during washing and processing. This study aimed to assess the redistribution of Salmonella Typhimurium LT2 during pilot-scale production of baby spinach and cilantro and redistribution of Escherichia coli O157:H7 during pilot-scale production of romaine lettuce. Four inoculated surrogate:uninoculated product weight ratios (10:100, 5:100, 1:100, and 0.5:100) and three inoculation levels (103, 101, and 10-1 CFU/g) were used for the three commodities. For each of three trials per condition, 5-kg batches containing uninoculated product and spot-inoculated surrogate products at each ratio and inoculation level were washed for 90 s in a 3.6-m-long flume tank through which 890 L of sanitizer-free, filtered tap water was circulated. After washing and removing the inoculated surrogate products, washed product (∼23, 225-g samples per trial) was analyzed for presence or absence of Salmonella Typhimurium or E. coli O157:H7 by using the GeneQuence Assay. For baby spinach, cilantro, and romaine lettuce, no significant differences ( P > 0.05) in the percentage of positive samples were observed at the same inoculation level and inoculated:uninoculated weight ratio. For each pathogen product evaluated (triplicate trials), inoculation level had a significant impact on the percentage of positive samples after processing, with the percentage of positive samples decreasing, as the initial surrogate inoculation level decreased. The weight ratio of contaminated:noncontaminated product plays an important role: positive samples ranged from 0% to 11.6% ± 2.05% and from 68.1% ± 33.6% to 100% among the four ratios at inoculation of 10-1 and 101 CFU/g, respectively. To our knowledge, this study is the first to assess the redistribution of low levels of pathogens from incoming product to leafy greens during processing and should provide important data for microbial risk assessments and other types of food safety analyses related to fresh-cut leafy greens.

Comparison of the Microbiological Quality and Safety between Conventional and Organic Vegetables Sold in Malaysia

Given the remarkable increase of public interest in organic food products, it is indeed critical to evaluate the microbiological risk associated with consumption of fresh organic produce. Organic farming practices including the use of animal manures may increase the risk of microbiological contamination as manure can act as a vehicle for transmission of foodborne pathogens. This study aimed to determine and compare the microbiological status between organic and conventional fresh produce at the retail level in Malaysia. A total of 152 organic and conventional vegetables were purchased at retail markets in Malaysia. Samples were analyzed for mesophilic aerobic bacteria, yeasts and molds, and total coliforms using conventional microbiological methods. Combination methods of most probable number-multiplex polymerase chain reaction (MPN-mPCR) were used to detect and quantify foodborne pathogens, including Escherichia coli O157:H7, Shiga toxin-producing E. coli (STEC), Listeria monocytogenes, Salmonella Typhimurium, and Salmonella Enteritidis. Results indicated that most types of organic and conventional vegetables possessed similar microbial count (P > 0.05) of mesophilic aerobic bacteria, yeasts and molds, and total coliforms. E. coli O157:H7 and S. Typhimurium were not detected in any sample analyzed in this study. Among the 152 samples tested, only the conventional lettuce and organic carrot were tested positive for STEC and S. Enteritidis, respectively. L. monocytogenes were more frequently detected in both organic (9.1%) and conventional vegetables (2.7%) as compared to E. coli O157:H7, S. Typhimurium, and S. Enteritidis. Overall, no trend was shown that either organically or conventionally grown vegetables have posed greater microbiological risks. These findings indicated that one particular type of farming practices would not affect the microbiological profiles of fresh produce. Therefore, regardless of farming methods, all vegetables should be subjected to appropriate post-harvest handling practices from farm to fork to ensure the quality and safety of the fresh produce.

Persistence of Escherichia coli O157:H7 during pilot-scale processing of iceberg lettuce using flume water containing peroxyacetic acid-based sanitizers and various organic loads

In order to minimize cross-contamination during leafy green processing, chemical sanitizers are routinely added to the wash water. This study assessed the efficacy of peroxyacetic acid and mixed peracid against E. coli O157:H7 on iceberg lettuce, in wash water, and on equipment during simulated commercial production in a pilot-scale processing line using flume water containing various organic loads. Iceberg lettuce (5.4kg) inoculated to contain 106CFU/g of a 4-strain cocktail of non-toxigenic, GFP-labeled, ampicillin-resistant E. coli O157:H7, was shredded using a commercial shredder, step-conveyed to a flume tank, washed for 90s using water alone or two different sanitizing treatments (50ppm peroxyacetic acid or mixed peracid) in water containing organic loads of 0, 2.5, 5 or 10% (w/v) blended iceberg lettuce, and then dried using a shaker table and centrifugal dryer. Thereafter, three 5.4-kg batches of uninoculated iceberg lettuce were identically processed. Various product (25g) and water (50ml) samples collected during processing along with equipment surface samples (100cm2) from the flume tank, shaker table and centrifugal dryer were then assessed for numbers of E. coli O157:H7. Organic load rarely impacted (P>0.05) the efficacy of either peroxyacetic acid or mixed peracid, with typical reductions of >5logCFU/ml in wash water throughout processing for all organic loads. Increases in organic load in the wash water corresponded to changes in total solids, chemical oxygen demand, turbidity, maximum filterable volume, and oxidation/reduction potential. After 90s of exposure to flume water, E. coli O157:H7 reductions on inoculated lettuce ranged from 0.97 to 1.74logCFU/g using peroxyacetic acid, with an average reduction of 1.35logCFU/g for mixed peracid. E. coli O157:H7 persisted on all previously uninoculated lettuce following the inoculated batch, emphasizing the need for improved intervention strategies that can better ensure end-product safety.

Postharvest Reduction of Coliphage MS2 from Romaine Lettuce during Simulated Commercial Processing with and without a Chlorine-Based Sanitizer

Viral foodborne outbreaks are a serious threat to public health, and fresh produce is becoming increasingly recognized as a transmission vehicle. To limit foodborne disease, ready-to-eat leafy greens are typically washed with a chlorine-based sanitizer during commercial production. This study assessed the efficacy of a chlorine-based sanitizer against coliphage MS2, as a potential surrogate for foodborne viruses, on fresh-cut romaine lettuce during simulated commercial production using a small-scale processing line. Before processing, romaine lettuce was inoculated to contain approximately 105 and 106 PFU/g of MS2 for experiments with and without sanitizer, respectively. Lettuce samples were collected following each stage of processing, which included mechanical shredding, 2 min of flume washing (with or without 25 ppm of free chlorine), shaker table dewatering, and centrifugal drying. In addition, the spent centrifuge water and flume wash water were collected, with the flume water concentrated using hollow-fiber ultrafiltration. MS2 was recovered from lettuce in Tris-glycine buffer and quantified as PFUs in a double-agar overlay assay. The greatest reduction in MS2 occurred between shredding and flume washing, with levels remaining relatively stable following flume washing with or without 25 ppm of free chlorine. Average total reductions of 0.8 and 1.0 log PFU/g were seen after processing with and without the sanitizer, respectively, with no statistical difference observed between the two treatments (P > 0.05). The average MS2 level in the spent centrifugation water started at 4.0 log PFU/ml for experiments with sanitizer and the average MS2 reduction in the flume wash water was 4 log (PFU) for experiments with sanitizer, demonstrating that removals could be achieved in the water itself. These findings suggest that the currently recommended commercial production practices are unable to effectively decrease viruses once they have attached to leafy greens during commercial processing.

Microbial dynamics of indicator microorganisms on fresh tomatoes in the supply chain from Mexico to the USA

Quality and safety of fresh produce are important to public health and maintaining commerce between Mexico and USA. While preventive practices can reduce risks of contamination and are generally successful, the variable environment of the supply chain of fresh produce can be suitable for introduction or proliferation of pathogenic microorganisms. As routine surveillance of these pathogens is not practical, indicator microorganisms are used to assess the sanitary conditions of production and handling environments. An opportunity exists to use indicators on fresh produce to measure how handling and transport from field to market may affect microbial populations that contribute to their quality or safety. The objective was to quantify indicator microorganisms on tomatoes sampled along the supply chain during the harvest year, in order to observe the levels and changes of populations at different locations. Roma tomatoes (n=475) were taken from the same lots (n=28) at four locations of the postharvest supply chain over five months: at arrival to and departure from the packinghouse in México, at the distribution center in Texas, and at retail in USA. Samples were analyzed individually for four microbial populations: aerobic plate count (APC), total coliforms (TC), generic Escherichia coli, and yeasts and molds (YM). APC population differed (p<0.05) from 1.9±1.1, 1.7±1.1, 2.3±1.1 and 3.5±1.4logCFU/g at postharvest, packing, distribution center and supermarket, respectively. TC populations were <1logCFU/g at postharvest, increased at packing (0.7±1.0logCFU/g), decreased in distribution (0.4±0.8logCFU/g) and increased in supermarkets (1.4±1.5logCFU/g). Generic E. coli was not identified from coliform populations in this supply chain. YM populations remained <1logCFU/g, with the exception of 1.1±1.3logCFU/g at supermarkets and tomatoes were not visibly spoiled. The levels reported from this pilot study demonstrated the dynamics within populations as influenced by time and conditions in one supply chain during a harvest year, while the large variances in some locations indicate opportunities for improvement. Overall, packinghouse and supermarket locations were identified as crucial points to control microbial safety risks.

A Comparison of Three C-Arm Draping Techniques to Minimize Contamination of the Surgical Field

The use of intraoperative fluoroscopy has become a routine and useful adjunct within orthopaedic surgery. However, the fluoroscopy machine may become an additional source of contamination in the operating room, particularly when maneuvering from the anterior-posterior position to the lateral position. Consequently, draping techniques were developed to maintain sterility of the operative field and surgeon. Despite a variety of methods, no studies exist to compare the sterility of these techniques specifically when the fluoroscopy machine is in the lateral imaging position. We evaluated the sterility of 3 c-arm draping techniques in a simulated operative environment. The 3 techniques consisted of a traditional 3-quarter sterile sheet attached to the side of the operative table, a modified clip-drape method, and a commercially available sterile pouch. Our study demonstrated that the traditional method poses a high risk for sterile field contamination, whereas the modified clip-drape method and commercially available sterile pouch kept floor contamination furthest from the surgical field. With the current data, we urge surgeons to use modified techniques rather than the traditional draping method.

A mathematical model for pathogen cross-contamination dynamics during produce wash

One of the main challenges for the fresh-food produce industry is to ensure that the produce is free from harmful pathogens. A potential area of risk is due to cross-contamination in a sanitizing chlorine wash-cycle, where the same water is used to wash contaminated as well as non-contaminated produce. However, this is also an area where effective intervention strategies are possible, provided we have a good understanding of the mechanism of cross-contamination. Based on recent experimental work by Luo, Y. et al. A pilot plant scale evaluation of a new process aid for enhancing chlorine efficacy against pathogen survival and cross-contamination during produce wash, International Journal of Food Microbiology, 158 (2012), 133-139, we have built mathematical models that allow us to quantify the amount of cross-contamination of Escherichia coli O157:H7 from spinach to lettuce, and assessed the efficacy of the associated wash-cycle protocols.

Inactivation of foodborne microorganisms using engineered water nanostructures (EWNS)

Foodborne diseases caused by the consumption of food contaminated with pathogenic microorganisms or their toxins have very serious economic and public health consequences. Here, we explored the effectiveness of a recently developed intervention method for inactivation of microorganisms on fresh produce, and food production surfaces. This method utilizes Engineered Water Nanostructures (EWNS) produced by electrospraying of water vapor. EWNS possess unique properties; they are 25 nm in diameter, remain airborne in indoor conditions for hours, contain Reactive Oxygen Species (ROS) and have very strong surface charge (on average 10 e/structure). Here, their efficacy in inactivating representative foodborne bacteria such as Escherichia coli, Salmonella enterica, and Listeria innocua, on stainless steel surfaces and on organic tomatoes, was assessed. The inactivation was facilitated using two different exposure approaches in order to optimize the delivery of EWNS to bacteria: (1) EWNS were delivered on the surfaces by diffusion and (2) a "draw through" Electrostatic Precipitator Exposure System (EPES) was developed and characterized for EWNS delivery to surfaces. Using the diffusion approach and an EWNS concentration of 24,000 #/cm3, the bacterial concentrations on the surfaces were reduced, depending on the bacterium and the surface type, by values ranging between 0.7 to 1.8 logs. Using the EPES approach and for an aerosol concentration of 50,000 #/cm3 at 90 min of exposure, results show a 1.4 log reduction for E. coli on organic tomato surfaces, as compared to the control (same conditions in regards to temperature and Relative Humidity). Furthermore, for L. innocua, the dose-response relationship was demonstrated and found to be a 0.7 and 1.2 logs removal at 12,000 and 23,000 #/cm3, respectively. The results presented here indicate that this novel, chemical-free, and environmentally friendly intervention method holds potential for development and application in the food industry, as a "green" alternative to existing disinfection methods.

Modeling transfer of Escherichia coli O157:H7 and Listeria monocytogenes during preparation of fresh-cut salads: impact of cutting and shredding practices

Cutting and shredding of leafy vegetables increases the risk of cross contamination in household settings. The distribution of Escherichia coli O157:H7 and Listeria monocytogenes transfer rates (Tr) between cutting knives and lettuce leaves was investigated and a semi-mechanistic model describing the bacterial transfer during consecutive cuts of leafy vegetables was developed. For both pathogens the distribution of log10Trs from lettuce to knife was towards low values. Conversely log10Trs from knife to lettuce ranged from -2.1 to -0.1 for E. coli O157:H7 and -2.0 to 0 for L. monocytogenes, and indicated a more variable phenomenon. Regarding consecutive cuts, a rapid initial transfer was followed by an asymptotic tail at low populations moving to lettuce or residing on knife. E. coli O157:H7 was transferred at slower rates than L. monocytogenes. These trends were sufficiently described by the transfer-model, with RMSE values of 0.426-0.613 and 0.531-0.908 for L. monocytogenes and E. coli O157:H7, respectively. The model showed good performance in validation trials but underestimated bacterial transfer during extrapolation experiments. The results of the study can provide information regarding cross contamination events in a common household. The constructed model could be a useful tool for the risk-assessment during preparation of leafy-green salads.

Effect of the food production chain from farm practices to vegetable processing on outbreak incidence

The popularity in the consumption of fresh and fresh-cut vegetables continues to increase globally. Fresh vegetables are an integral part of a healthy diet, providing vitamins, minerals, antioxidants and other health-promoting compounds. The diversity of fresh vegetables and packaging formats (spring mix in clamshell container, bagged heads of lettuce) support increased consumption. Unfortunately, vegetable production and processing practices are not sufficient to ensure complete microbial safety. This review highlights a few specific areas that require greater attention and research. Selected outbreaks are presented to emphasize the need for science-based 'best practices'. Laboratory and field studies have focused on inactivation of pathogens associated with manure in liquid, slurry or solid forms. As production practices change, other forms and types of soil amendments are being used more prevalently. Information regarding the microbial safety of fish emulsion and pellet form of manure is limited. The topic of global climate change is controversial, but the potential effect on agriculture cannot be ignored. Changes in temperature, precipitation, humidity and wind can impact crops and the microorganisms that are associated with production environments. Climate change could potentially enhance the ability of pathogens to survive and persist in soil, water and crops, increasing human health risks. Limited research has focused on the prevalence and behaviour of viruses in pre and post-harvest environments and on vegetable commodities. Globally, viruses are a major cause of foodborne illnesses, but are seldom tested for in soil, soil amendments, manure and crops. Greater attention must also be given to the improvement in the microbial quality of seeds used in sprout production. Human pathogens associated with seeds can result in contamination of sprouts intended for human consumption, even when all appropriate 'best practices' are used by sprout growers.

Efficacy of various sanitizers against Salmonella during simulated commercial packing of tomatoes

Chemical sanitizers are usually added to dump tank water to minimize cross-contamination during tomato packing. However, the efficacy of sanitizers continues to be questioned. This study assessed the ability of six commonly used sanitizers (40 ppm of peroxyacetic acid, 40 ppm of mixed peracid, 40 ppm of available chlorine alone or acidified to pH 6.0 with citric acid or T-128, and electrolyzed water containing 40 ppm of available chlorine at pH 6.7) to reduce Salmonella on tomatoes, in wash water, and on equipment surfaces using a pilot-scale processing line. Red round tomatoes (11.3 kg) were dip inoculated to contain Salmonella at ∼6 log CFU/g, air dried for 2 h, treated for 2 min in a 3.3-m-long dump tank and then dried on a roller conveyor, with sanitizer-free water serving as the control. Tomato and water samples were collected at 15-s intervals during washing with additional dump tank, water tank, and roller conveyor surface samples collected after washing. All samples were appropriately neutralized, diluted, and surface plated on Trypticase soy agar containing 0.6% yeast extract, 0.05% ferric ammonium citrate, and 0.03% sodium thiosulfate with or without membrane filtration to enumerate Salmonella. All six sanitizer treatments were more efficacious than the water control (P ≤ 0.05), with chlorine plus citric acid yielding the greatest Salmonella reduction on tomatoes (3.1 log CFU/g). After processing, all sanitizer wash solutions contained significantly lower (P ≤ 0.05) levels of Salmonella than the water control (3.0 log CFU/ml). The four chlorine-based sanitizer treatments yielded significantly lower Salmonella populations (P ≤ 0.05) in the wash solution compared with peroxyacetic acid and mixed peracid. After processing with sanitizers, Salmonella populations decreased to nondetectable levels (<0.2 log CFU/100 cm(2) ) on the equipment surfaces.

Behavior of Shiga toxigenic Escherichia coli relevant to lettuce washing processes and consideration of factors for evaluating washing process surrogates

Postharvest processes for fresh produce commonly include washing in water containing antimicrobial chemicals, such as chlorine; however, if the antimicrobials are not present in sufficient levels, washing can promote the spread of contamination that might be present. To understand cross-contamination risk during washing, we tested a collection of Shiga toxigenic Escherichia coli (STEC), including O157:H7 and other non-O157 strains, for certain traits during washing of fresh-cut lettuce, i.e., sensitivity to sublethal chlorine levels and ability to cross-contaminate (detach from and attach to) lettuce in the presence of sublethal chlorine levels. Nonpathogenic E. coli Nissle 1917 (EcN) and Pediococcus pentosaceus lactic acid bacterial species (LAB) were included as potential washing process validation surrogates. As measured by extension of the lag phase of growth in media containing 0.15 ppm of chlorine, chlorine sensitivity varied among the STECs. Cross-contamination was assessed by evaluating transfer of bacteria from inoculated to uninoculated leaves during washing. Without chlorine, similar transfer to wash water and uninoculated leaves was shown. In 1 ppm of chlorine, cross-contamination was not detected with most strains, except for the substantial transfer by a STEC O111 strain and EcN in some replicates. Strain O111 and EcN showed less inactivation in 0.25 ppm of chlorine water compared with O157 (P < 0.05). LAB showed similar transfer and similar chlorine inactivation to O157. Considering together the sublethal chlorine sensitivity and detachment/attachment traits, neither EcN nor LAB displayed optimal characteristics as washing process surrogates for the STEC strains, although further evaluation is needed. This work demonstrated a range of behaviors of STEC strains during lettuce washing and may be helpful in hazard characterization, identifying factors to consider for evaluating washing process efficacy, and identifying phenotypic traits to select surrogates to validate washing processes.

Impact of organic load on Escherichia coli O157:H7 survival during pilot-scale processing of iceberg lettuce with acidified sodium hypochlorite

Chemical sanitizers are routinely used during commercial flume washing of fresh-cut leafy greens to minimize cross-contamination from the water. This study assessed the efficacy of three chlorine treatments against Escherichia coli O157:H7 on iceberg lettuce, in wash water, and on surfaces of a pilot-scale processing line using flume water containing various organic loads. Iceberg lettuce (5.4 kg) was inoculated to contain 10(6) CFU/g of a 4-strain cocktail of nontoxigenic, green fluorescent protein-labeled, ampicillin-resistant E. coli O157:H7 and held for 24 h at 4°C before processing. Lettuce was shredded using a Urschel TransSlicer, step conveyed to a flume tank, washed for 90 s using water alone or one of three different sanitizing treatments (50 ppm of total chlorine either alone or acidified to pH 6.5 with citric acid or T-128) in water containing organic loads of 0, 2.5, 5, or 10% (wt/vol) blended iceberg lettuce, and then dried using a shaker table and centrifugal dryer. Next, three 5.4-kg batches of uninoculated iceberg lettuce were processed identically. Various product (25 g), water (50 ml), and equipment surface swab (100 cm(2)) samples were homogenized in neutralizing buffer, diluted appropriately, and plated on tryptic soy agar containing 0.6% (wt/vol) yeast extract and 100 ppm of ampicillin without prior 0.45- m m membrane filtration to quantify E. coli O157:H7. Organic load negatively impacted the efficacy of all three chlorine treatments (P < 0.05) at the end of processing, with typical E. coli O157:H7 reductions of >5 and 0.9 to 3.7 log CFU/ml for organic loads of 0 and 10%, respectively. Organic load rarely had a significant impact (P < 0.05) on the efficacy of chlorine, chlorine plus citric acid, or chlorine plus T-128 against E. coli O157:H7 on iceberg lettuce. Reduced sanitizer efficacy generally corresponded to changes in total solids, chemical oxygen demand, turbidity, and maximum filterable volume, indicating that these tests may be effective alternatives to the industry standard of oxygen/reduction potential.

Tracking an Escherichia coli O157:H7-contaminated batch of leafy greens through a pilot-scale fresh-cut processing line

Cross-contamination of fresh-cut leafy greens with residual Escherichia coli O157:H7-contaminated product during commercial processing was likely a contributing factor in several recent multistate outbreaks. Consequently, radicchio was used as a visual marker to track the spread of the contaminated product to iceberg lettuce in a pilot-scale processing line that included a commercial shredder, step conveyor, flume tank, shaker table, and centrifugal dryer. Uninoculated iceberg lettuce (45 kg) was processed, followed by 9.1 kg of radicchio (dip inoculated to contain a four-strain, green fluorescent protein-labeled nontoxigenic E. coli O157:H7 cocktail at 10(6) CFU/g) and 907 kg (2,000 lb) of uninoculated iceberg lettuce. After collecting the lettuce and radicchio in about 40 bags (∼22.7 kg per bag) along with water and equipment surface samples, all visible shreds of radicchio were retrieved from the bags of shredded product, the equipment, and the floor. E. coli O157:H7 populations were quantified in the lettuce, water, and equipment samples by direct plating with or without prior membrane filtration on Trypticase soy agar containing 0.6% yeast extract and 100 ppm of ampicillin. Based on triplicate experiments, the weight of radicchio in the shredded lettuce averaged 614.9 g (93.6%), 6.9 g (1.3%), 5.0 g (0.8%), and 2.8 g (0.5%) for bags 1 to 10, 11 to 20, 21 to 30, and 31 to 40, respectively, with mean E. coli O157:H7 populations of 1.7, 1.2, 1.1, and 1.1 log CFU/g in radicchio-free lettuce. After processing, more radicchio remained on the conveyor (9.8 g; P < 0.05), compared with the shredder (8.3 g), flume tank (3.5 g), and shaker table (0.1 g), with similar E. coli O157:H7 populations (P > 0.05) recovered from all equipment surfaces after processing. These findings clearly demonstrate both the potential for the continuous spread of contaminated lettuce to multiple batches of product during processing and the need for improved equipment designs that minimize the buildup of residual product during processing.

Laboratory and pilot-scale dead-end ultrafiltration concentration of sanitizer-free and chlorinated lettuce wash water for improved detection of Escherichia coli O157:H7

An automated dead-end (single pass, no recirculation) ultrafiltration device, the Portable Multi-use Automated Concentration System (PMACS), was evaluated as a means to concentrate Escherichia coli O157:H7 from 40 liters of simulated commercial lettuce wash water. The assessment included generating, sieving, and concentrating sanitizer-free lettuce wash water, either uninoculated or inoculated with green fluorescent protein-transformed E. coli O157:H7 at a high (1.00 log CFU/ml) or low (-1.00 log CFU/ml) concentration. Cells collected within the filters were recovered in approximately 400 ml of buffer to create lettuce wash retentates. The extent of concentration was determined by viable plate counts using a medium selective for the transformed E. coli O157:H7. The samples were qualitatively analyzed for E. coli O157:H7 according to the U. S. Food and Drug Administration Bacteriological Analytical Manual enrichment method and with an electrochemiluminescence immunoassay. This concentration method was then evaluated in a pilot-scale production line at Michigan State University using chlorinated (100, 30, and 10 ppm of available chlorine) lettuce wash water. The total PMACS processing times were 82 ± 6 and 65 ± 5 min for sanitizer-free and chlorinated washes, respectively. Overall, E. coli O157:H7 populations were approximately 2 log higher in retentates than in unconcentrated lettuce wash samples. The higher E. coli O157:H7 levels in the retentates enabled cultural and electrochemiluminescence immunoassay detection in some samples when the corresponding lettuce wash samples were negative. When combined with standard and rapid detection methods, the PMACS concentration method may provide a means to enhance pathogen monitoring of produce wash water.

Use of simulation tools to illustrate the effect of data management practices for low and negative plate counts on the estimated parameters of microbial reduction models

In the last 20 years, the use of microbial reduction models has expanded significantly, including inactivation (linear and nonlinear), survival, and transfer models. However, a major constraint for model development is the impossibility to directly quantify the number of viable microorganisms below the limit of detection (LOD) for a given study. Different approaches have been used to manage this challenge, including ignoring negative plate counts, using statistical estimations, or applying data transformations. Our objective was to illustrate and quantify the effect of negative plate count data management approaches on parameter estimation for microbial reduction models. Because it is impossible to obtain accurate plate counts below the LOD, we performed simulated experiments to generate synthetic data for both log-linear and Weibull-type microbial reductions. We then applied five different, previously reported data management practices and fit log-linear and Weibull models to the resulting data. The results indicated a significant effect (α = 0.05) of the data management practices on the estimated model parameters and performance indicators. For example, when the negative plate counts were replaced by the LOD for log-linear data sets, the slope of the subsequent log-linear model was, on average, 22% smaller than for the original data, the resulting model underpredicted lethality by up to 2.0 log, and the Weibull model was erroneously selected as the most likely correct model for those data. The results demonstrate that it is important to explicitly report LODs and related data management protocols, which can significantly affect model results, interpretation, and utility. Ultimately, we recommend using only the positive plate counts to estimate model parameters for microbial reduction curves and avoiding any data value substitutions or transformations when managing negative plate counts to yield the most accurate model parameters.

Enteric pathogen-plant interactions: molecular connections leading to colonization and growth and implications for food safety

Leafy green vegetables have been identified as a source of foodborne illnesses worldwide over the past decade. Human enteric pathogens, such as Escherichia coli O157:H7 and Salmonella, have been implicated in numerous food poisoning outbreaks associated with the consumption of fresh produce. An understanding of the mechanisms responsible for the establishment of pathogenic bacteria in or on vegetable plants is critical for understanding and ameliorating this problem as well as ensuring the safety of our food supply. While previous studies have described the growth and survival of enteric pathogens in the environment and also the risk factors associated with the contamination of vegetables, the molecular events involved in the colonization of fresh produce by enteric pathogens are just beginning to be elucidated. This review summarizes recent findings on the interactions of several bacterial pathogens with leafy green vegetables. Changes in gene expression linked to the bacterial attachment and colonization of plant structures are discussed in light of their relevance to plant-microbe interactions. We propose a mechanism for the establishment and association of enteric pathogens with plants and discuss potential strategies to address the problem of foodborne illness linked to the consumption of leafy green vegetables.

Listeria monocytogenes transfer during mechanical dicing of celery and growth during subsequent storage

The transfer of Listeria monocytogenes to previously uncontaminated product during mechanical dicing of celery and its growth during storage at various temperatures were evaluated. In each of three trials, 275 g of retail celery stalks was immersed in an aqueous five-strain L. monocytogenes cocktail to obtain an average of 5.6 log CFU/g and then was diced using a hand-operated dicer, followed by sequential dicing of 15 identical 250-g batches of uninoculated celery using the same dicer. Each batch of diced celery was examined for numbers of Listeria initially and after 3 and 7 days of storage at 4, 7, and 10 °C. Additionally, the percentage by weight of inoculated product transferred to each of 15 batches of uninoculated celery was determined using inoculated red stems of Swiss chard as a surrogate. Listeria transfer to diced celery was also assessed after removing the Swiss chard. L. monocytogenes transferred from the initial batch of inoculated celery to all 15 batches of uninoculated celery during dicing, with populations decreasing from 5.2 to 2.0 log CFU/g on the day of processing. At 10 °C, Listeria reached an average population of 3.4 log CFU/g in all batches of uninoculated celery. Fewer batches of celery showed significant growth during storage at 4 and 7 °C (P < 0.05). Swiss chard pieces were recovered from all 15 batches of celery, with similar amounts seen in batches 2 to 15 (P > 0.05). L. monocytogenes was also recovered from each batch of uninoculated celery after the removal of Swiss chard, with populations decreasing from 4.7 to 1.7 log CFU/g. Storing the diced celery at 10 °C yielded a L. monocytogenes generation time of 0.87 days, with no significant growth observed during storage at 4 or 7 °C. Consequently, mitigation strategies during dicing and proper refrigeration are essential to minimizing potential health risks associated with diced celery.

Salmonella transfer during pilot plant scale washing and roller conveying of tomatoes

Salmonella transfer during washing and roller conveying of inoculated tomatoes was quantified using a pilot scale tomato packing line equipped with plastic, foam, or brush rollers. Red round tomatoes (2.3 kg) were dip inoculated with Salmonella enterica serovar Typhimurium LT2 (avirulent) (4 log CFU/g), air dried for 2 h, and then washed in sanitizer-free water for 2 min. Inoculated tomatoes were then passed single file over a 1.5-m conveyor equipped with plastic, foam, or brush rollers followed by 25 previously washed uninoculated tomatoes. Tomato samples were collected after 2 min of both washing and roller conveying, with all 25 uninoculated tomatoes collected individually after conveying. Roller surface samples were collected before and after conveying the uninoculated tomatoes. Both tomato and surface samples were quantitatively examined for Salmonella by direct plating or membrane filtration using xylose lysine Tergitol 4 agar. Regardless of the roller type, Salmonella populations on inoculated tomatoes did not significantly (P < 0.05) decrease during contact with the roller conveyors. After conveying uninoculated tomatoes over contaminated foam rollers, 96% of the 25 tomatoes were cross-contaminated with Salmonella at >100 CFU per tomato. With plastic rollers, 24 and 76% of tomatoes were cross-contaminated with Salmonella at 10 to 100 and 1 to 10 CFU per tomato, respectively. In contrast, only 8% of 25 tomatoes were cross-contaminated with brush rollers with Salmonella populations of 1 to 10 CFU per tomato. Overall, cross-contamination was greatest with foam, followed by plastic and brush rollers (P < 0.05). Adding peroxyacetic acid or chlorine to the wash water significantly decreased cross-contamination during tomato conveying, with chlorine less effective in controlling Salmonella on foam compared with plastic and brush rollers.