Long-term evaluation of clinical performance of direct-bonded brackets: an epidemiologic survey

Comparison between a glass ionomer cement and a compomer concerning bonded acrylic expander retention and white spot formation : A randomized clinical trial

BACKGROUND

The goal of the present study was to compare a compomer and a glass ionomer cement (GIC) used for full the cementation of acrylic splint-type maxillary expanders with respect to failure rate and white spot lesions (WSLs) in vivo.

METHODS

A total of 120 patients with posterior crossbite and transverse maxillary deficiency were included to the study. The patients were randomly allocated to two groups: GIC group (n = 60) and compomer group (n = 60). The hyrax screw in both groups was activated two times a day for the first week then once a day until the desired amount of expansion was achieved. The rapid maxillary expansion (RME) appliance was left in the mouth for an extra month after the active expansion phase as a retention appliance. Then cementation failures were recorded. In addition, the patients were evaluated for white spot lesions (WSLs) before cementation and after removal of the appliance.

RESULTS

A total of 12 (20%) and 2 (3.3%) RME devices failed in the GIC and the compomer group, respectively. This difference between groups was statistically significant (p = 0.044). There were also statistically significant differences between the GIC and compomer groups in terms of WSLs on the central (p = 0.06) and lateral (p = 0.011) incisors, and on the first molar (0.028). However, no differences were observed for the canines (p = 0.185), first (p = 0.457) and second premolars (p = 0.116). In total, there was a statistically significant difference between the GIC and compomer groups (p = 0.048), with more WSLs in the GIC group.

CONCLUSIONS

Among the products used in the study, the compomer should be preferred over the GIC for cementation of acrylic splint-type rapid maxillary expanders in terms of failure rate and WSLs.

Bracket Failure in Orthodontic Patients: The Incidence and the Influence of Different Factors

Failure of brackets is a common problem in orthodontics. This affects the treatment time, cost, and compliance of the patient. This study was conducted to estimate the bracket failure rate and the related factors for the long term. Methodology. This ambidirectional cohort study included 150 nonsyndromic orthodontic patients undergoing fixed appliance therapy for the last two years. The same patients were followed for 7 months. Different variables related to bracket failure were evaluated. The available data were analyzed descriptively, and the Kaplan-Meier estimate was used to measure the bracket survival rate from the date of bonding to failure. Results. A total of 180 bracket bond failures in the 150 included patients (52.2% males and 47.8% females) with a median age of 17 years (range 10-25 years). 69% of brackets failures were reported within the first 6 months after bonding. About 58.3% of bracket failure was noticed in adolescent patients before the age of 18 years. The majority of the cohort (81.1%) has good oral hygiene. The failure rate in patients with normal overbite was 41.1%, in decreased overbite cases was 15%, while in deep bite cases the failure rate was 43.9% with a statistically significant difference. Adults show less bracket failure (41.7%) than adolescent patients (58.3%). More bracket failure was noted in the lower arch (55%) than the upper arch (45%), and there were more bond failures posteriorly (61%) than on the anterior teeth (39%). Majority (41.1%) of the bracket failed on round NiTi wires. Conclusion. The bracket failure rate was 6.4%, with most bracket failure occurring in the first 6 months after bonding with individual difference. There was more incidence of bond failure in an increased overbite, adolescents, lower arch, posterior teeth, and lighter alignment wires.

Influence of Patient Attitude on Bracket Failure Rate: A Prospective Study

Objective:

The aim of this study is to assess the influence of general attitude and attitude toward orthodontic treatment on bracket failure rate.

Methods and Materials:

The sample comprised 128 orthodontic patients of both genders (82 women and 46 men), divided into two groups—adolescents (12-18 years old) and adults (19-25 years old), who underwent fixed orthodontic treatment with metallic braces. Two questionnaires were handed out—one before beginning the treatment and, the second, 6 months after the start of treatment. Both the questionnaires consisted of 12 questions with 5 options each, in which the attitude was scored from 1 to 5.

Conclusion:

Patients with poor attitude scoring had higher bracket failure rate and vice versa.

Predicting the bracket bond failure rate in orthodontic patients: A retrospective cohort study

The aim of this study was to determine the risk factors associated with orthodontic bracket bond failure and to develop a prediction equation for orthodontic bracket bond failure rate using the risk factors. This was a retrospective cohort study conducted on a sample of 690 brackets in orthodontic patients aged 10 to 28 years old (mean age 17.97±5.11 years old) visiting a dental hospital. The effect of various parameters of orthodontic bond strength was assessed on bracket failure rate using survival analysis. Parametric (exponential) regression analysis was used to determine the risk factors associated with bracket failure and a prediction equation was formulated to predict the bracket failure rate. The overall mean survival time for the brackets was 3.04 (2.9-3.17) years. The univariate analysis showed a statistically significant (P<0.05) association of bracket material, site, overjet, overbite, incisor and molar classification and age. The multivariate analysis showed a significant interaction between site and side along with bracket material, jaw, overjet and overbite in the model. The risk of bracket failure on the right posterior region is 7.7 times that in the right anterior region when adjusted for all other variables in the model (HR: 7.7; 95% CI: 4.3-13.6). The model including bracket material, jaw, overjet, overbite and interaction between site and side can be used as a predictor of hazard rate for orthodontic bracket failure. Care should be taken in bonding brackets in the posterior region, as their debonding rate is higher as compared to anterior region.

The association between patient's compliance and age with the bonding failure of orthodontic brackets: a cross-sectional study

Background

An efficient orthodontic treatment must aim the best occlusal result in the shortest possible time. One of the factors that can interfere in this goal is the bracket debonding during the treatment. This study aimed at assessing the different factors related to brackets failure, highlighting age and patient cooperation with treatment.

Methods

The sample comprised 199 orthodontic patients of both genders (103 women and 96 men); divided into two groups—adolescents (12 to 18 years old, 118 patients) and adults (19 to 59 years old, 81 patients). A questionnaire was applied regarding the motivation of patients to seek treatment and whether they had received information on appliance care; patients also filled out their level of cooperation with treatment in a visual analog scale (VAS). Additionally, other variables were assessed, such as the teeth with bracket debonding, the presence of deep overbite, and the use of bite plate. The Mann-Whitney test was used, and a 5% significance level was applied for analyses.

Results

It was observed that 20.1% of patients presented at least one tooth with bracket failure, and the lower arch was the most prevalent site (47.5%). Adolescents presented more debonding (25.4%) than adults (12.3%). Individuals with better VAS scores on cooperation sought treatment on their own (p = 0.042), were adults (p ≤ 0.001), and showed lower rate of failure of brackets (p ≤ 0.001). The factors related to malocclusion and treatment performed had no statistical significance.

Conclusion

Greater cooperation was expected from adult individuals who sought treatment on their own and presented low rate of bracket failure.

The effect of conventional versus figure-of-eight module ligation on mandibular incisor alignment: a randomised controlled trial

OBJECTIVE

To determine whether using figure-of-eight modules affects the rate of lower incisor alignment compared with conventionally tied modules.

DESIGN

Prospective randomised controlled trial.

SETTING

Orthodontic department at Queen's Hospital, Burton upon Trent, UK.

METHODS

One hundred and twenty participants were randomly allocated to conventional module or figure-of-eight module groups, stratified for extraction or non-extraction lower arch treatment. Eligibility criteria included patients who were 12-15 years of age at the start of treatment, in the permanent dentition, and had mandibular incisor irregularity of 5-10 mm (clinical observation). The primary outcome was the rate of lower incisor alignment during the first 12 weeks of orthodontic treatment. The secondary outcome was bracket failure rate. Lower labial segment alignment was measured on study models using the Little's Irregularity Index at the start (T0) of treatment, at 6 weeks (T1) and 12 weeks (T2). Case records were analysed to assess the number of bracket failures.

RESULTS

The four groups were well matched at baseline with respect to gender, age and irregularity. All patients completed the trial and data were analysed on an intention to treat basis. In both ligation groups, the lower teeth aligned significantly faster when the treatment involved extractions, for the time periods T0-T1 and T0-T2 (p < 0.05). There were no statistically significant differences between conventional module and figure-of-eight module ligation on the rate of alignment (per month) for all three-time periods. The bracket failure rate was also similar in both test groups; 4.08% for conventional and 3.21% for figure-of-eight ligation.

CONCLUSIONS

Ligation with figure-of-eight modules has no clinically significant effect on the rate of lower incisor alignment; it does not seem to hinder or quicken the alignment of teeth. There were no differences in the mean number of bracket failures per person.

Effectiveness of high irradiance for short-time exposures on polymerization of composite under metal brackets

OBJECTIVE

To evaluate the effect of different curing modes available in a dental light-curing unit on degree of conversion (DC) of a composite photoactivated under a metal orthodontic bracket.

MATERIALS AND METHODS

The average irradiance and total energy delivered by three curing modes (standard, high, and extra power) of a multiwave LED unit (Valo Cordless, Ultradent Products, South Jordan, Utah) were measured using the longest time available for each mode (20, 4, and 3 seconds, respectively). Brackets (n = 3/group) were bonded to molar epoxy resin replicas using each curing mode. Mesiodistal sections, 0.5 mm thick, were assessed using an infrared spectrometer microscope. Spectra of composite beneath the brackets were sequentially collected using the mapping tool in near-infrared (NIR)-transmittance mode. Composite conversion was mapped between the mesial and distal edges of the bracket base using 400-μm steps for a total of 10 measurements per specimen. Data from irradiance and total energy were analyzed by one-way ANOVA, while data of DC were analyzed with two-way repeated measures ANOVA (α = 0.05).

RESULTS

The highest DC values were observed for standard power (mean 56%, P < .05), while no difference was observed between high (50%) and extra power (49%) modes. Regarding the site of measurement, higher DC was observed close to the bracket edges (52%, P < .05).

CONCLUSIONS

The use of high irradiance for a short time slightly reduced the DC. The small magnitude of reduction suggests that use of a high irradiance protocol is a clinically valid approach when bonding metal brackets.