Interfacial Interactions of a Myoglobin/DOPC Hybrid System at the Air-Water Interface and Its Physicochemical Properties

In the present study, the intermolecular interactions between a water-insoluble phospholipid (DOPC) and water-soluble protein (myoglobin) and the interaction among themselves were investigated at the air-water interface using the Langmuir and Langmuir-Blodgett techniques. The effects of changes in physicochemical factors, like pH and temperature, on these interactions were also examined. Surface pressure-molecular area (π-A) isotherms of the DOPC monolayer at the air-water interface, with and without myoglobin (Myo) revealed the evolution of various physical properties, such as elastic, thermodynamic, and hysteric properties, in response to changes in subphase pH and temperature. With the increment of subphase pH from 5 to 7 at a fixed temperature (20 °C), the DOPC isotherm expanded, and the in-plane elasticity (CS-1) decreased, but no significant presence of hysteresis was encountered in either of the pH values. On the other hand, a diminution of temperature (from 20 to 5 °C) leads to an expansion of monolayers yielding low elasticity and significant hysteresis. The incorporation of Myo molecules within the DOPC monolayer decreased the CS-1 value of the DOPC monolayer. Such a decrement in CS-1 was also encountered while increasing the pH and decreasing the temperature (T) of the subphase in the absence of Myo. Systematic expansion of DOPC isotherm and increased hysteric area with the increase in Myo proportion were observed and the atomic force microscopy (AFM) observations suggested a strong conjugation between Myo and DOPC in the mixed monolayer. The denaturation effect of Myo molecules was studied using AFM at different temperatures. Furthermore, the Myo molecules were found to be most surface active at pH = 7, which is very close to its isoelectric point. These observations come up with the interaction mechanism between biomolecules under dynamically varied conditions.

A Molecular Dynamic Study of the Effects of Surface Partitioning on the OH Radical Interactions with Solutes in Multicomponent Aqueous Aerosols

The surface-bulk partitioning of small saccharide and amide molecules in aqueous droplets was investigated using molecular dynamics. The air-particle interface was modeled using a 80 Å cubic water box containing a series of organic molecules and surrounded by gaseous OH radicals. The properties of the organic solutes within the interface and the water bulk were examined at a molecular level using density profiles and radial pair distribution functions. Molecules containing only polar functional groups such as urea and glucose are found predominantly in the water bulk, forming an exclusion layer near the water surface. Substitution of a single polar group by an alkyl group in sugars and amides leads to the migration of the molecule toward the interface. Within the first 2 nm from the water surface, surface-active solutes lose their rotational freedom and adopt a preferred orientation with the alkyl group pointing toward the surface. The different packing within the interface leads to different solvation shell structures and enhanced interaction between the organic molecules and absorbed OH radicals. The simulations provide quantitative information about the dimension, composition, and organization of the air-water interface as well as about the nonreactive interaction of the OH radicals with the organic solutes. It suggests that increased concentrations, preferred orientations, and decreased solvation near the air-water surface may lead to differences in reactivities between surface-active and surface-inactive molecules. The results are important to explain how heterogeneous oxidation mechanisms and kinetics within interfaces may differ from those of the bulk.

Thermodynamics and In-Plane Viscoelasticity of Anionic Phospholipid Membranes Modulated by an Ionic Liquid

This article presents the effects of an imidazolium-based ionic liquid (IL) on the thermodynamics and in-plane viscoelastic properties of model membranes of anionic phospholipids. The negative Zeta potential of multilamellar vesicles of 14 carbon lipid 1,2-dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DMPG) is observed to reduce due to the presence of few mole % of an IL 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]). The effect was found to be stronger on enhancing the chain length of the lipid. The surface pressure-area isotherms of lipid monolayer formed at air-water interface are modified by the IL reducing the effective area per molecule. Further, the equilibrium elasticity of the film is altered depending upon the thermodynamic phase of the lipids. While the presence of the IL in the DMPG lipid makes it ordered in the gel phase by reducing the entropy, the effect is opposite in the fluid phase. The in-plane viscoelastic parameters of the lipid film is quantified by dilation rheology using the oscillatory barriers of a Langmuir trough. Even though the low chain lipid DMPG does not show any effect of IL on its storage and loss moduli, the longer chain lipids exhibit a prominent effect in the liquid extended (LE) phase. Further, the dynamic response of the lipid film is found to be distinctly different in the liquid condensed (LC) phase from that of the LE phase.

Carbon Nanoparticle-Induced Changes to Lipid Monolayer Structure at Water-Air Interfaces

Surface specific vibrational spectroscopy experiments together with surface tension measurements and spectroscopic ellipsometry data were used to characterize the effects of soluble carbon particulates on compressed and partially compressed lipid monolayers adsorbed to the water-air interface. The lipid monolayers consisted of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DPPC), and measurements were made for both tightly packed monolayers (40 Ų/molecule) and monolayers in their liquid condensed state (55 Ų/molecule). Langmuir trough data show that very small amounts of PHF (0.0075 mg/mL or 6.4 × 10^-6 M) decrease lipid film compressibility. This finding supports a cooperative adsorption mechanism whereby the soluble PHFs are drawn to the surface and associate with the insoluble DPPC monolayer. Excess free energies (ΔG_mix^E) were positive, consistent with the cooperative adsorption mechanism, and although the excess free energies are small (≤1 kJ/mol), adsorbed PHF has measurable effects on monolayer structure. Further support for the cooperative adsorption mechanism at the water-air interface comes from vibrational sum frequency generation (VSFG) experiments. Low PHF concentrations (≤0.06 mg/mL) increase DPPC acyl chain ordering in liquid condensed lipid films and decrease DPPC acyl chain ordering and film thickness in tightly packed lipid films.

A Review of the Dynamic Mathematical Modeling of Heavy Metal Removal with the Biosorption Process

Biosorption has great potential in removing toxic effluents from wastewater, especially heavy metal ions such as cobalt, lead, copper, mercury, cadmium, nickel and other ions. Mathematically modeling of biosorption process is essential for the economical and robust design of equipment employing the bioadsorption process. However, biosorption is a complex physicochemical process involving various transport and equilibrium processes, such as absorption, adsorption, ion exchange and surface and interfacial phenomena. The biosorption process becomes even more complex in cases of multicomponent systems and needs an extensive parametric analysis to develop a mathematical model in order to quantify metal ion recovery and the performance of the process. The biosorption process involves various process parameters, such as concentration, contact time, pH, charge, porosity, pore size, available sites, velocity and coefficients, related to activity, diffusion and dispersion. In this review paper, we describe the fundamental physical and chemical processes involved in the biosorption of heavy metals on various types of commonly employed biosorbents. The most common steady state and dynamic mathematical models to describe biosorption in batch and fixed-bed columns are summarized. Mathematical modeling of dynamic process models results in highly coupled partial differential equations. Approximate methods to study the sensitivity analysis of important parameters are suggested.

Development and Optimization of Itraconazole-Loaded Solid Lipid Nanoparticles for Topical Administration Using High Shear Homogenization Process by Design of Experiments: In Vitro, Ex Vivo and In Vivo Evaluation

The aim of present study was to develop topical itraconazole (ITZ)-loaded solid lipid nanoparticles for treatment of superficial fungal infections. Formulations were prepared using high shear homogenization process, and optimized by employing a two-step design of experiments (DoE) approach. It comprised a Taguchi experimental design for screening of 'vital few' factors, and a central composite experimental design for optimization. Overlay of the response surface maps for percent drug entrapment (PDE), particle size, ITZ skin retention and permeation was performed to obtain the optimized ITZ-loaded SLNs (OPT-SLNs) suspension. The optimized ITZ-loaded SLNs (OPT-SLNs) showed mean particle size of (262.92 ± 8.56 nm) and zeta potential value of 22.36 mV. Excellent drug entrapment (94.21 ± 3.35%) and skin retention of ITZ (43.03 ± 1.86 μg/cm²) was achieved by OPT-SLNs. The hydrogel formulation of OPT-SLNs exhibited good gel consistency and spreadability characteristics. Pharmacodynamic and skin sensitivity studies in standardized rodent models revealed that OPT-SLNs hydrogel was more efficacious than conventional oral and topical antifungal therapies, and also safe for topical administration. Furthermore, the histoptahological evaluation depicted complete recovery of infected rats after 14-day treatment regimen of OPT-SLNs hydrogel. The developed formulation was found to have tremendous potential to enhance ITZ activity through topical administration approach.

In vitro characterization and in vivo comparison of the pulmonary outcomes of Poractant alfa and Calsurf in ventilated preterm rabbits

Poractant alfa and Calsurf are two natural surfactants widely used in China for the treatment of neonatal respiratory distress syndrome, which are extracted from porcine and calf lungs, respectively. The purpose of this experimental study was to compare their in vitro characteristics and in vivo effects in the improvement of pulmonary function and protection of lung injury. The biophysical properties, ultrastructure, and lipid composition of both surfactant preparations were respectively analysed in vitro by means of Langmuir-Blodgett trough (LBT), atomic force microscopy (AFM), and liquid-chromatography mass-spectrometry (LC-MS). Then, as core pharmacological activity, both head-to-head (100 and 200 mg/kg for both surfactants) and licensed dose comparisons (70 mg/kg Calsurf vs. 200 mg/kg Poractant alfa) between the two surfactants were conducted as prophylaxis in preterm rabbits with primary surfactant deficiency, assessing survival time and rate and dynamic compliance of the respiratory system (Cdyn). Intrapulmonary surfactant pools, morphometric volume density as alveolar expansion (Vv), and lung injury scores were determined post mortem. AFM and LC-MS analysis revealed qualitative differences in the ultrastructure as well as in the lipid composition of both preparations. Calsurf showed a longer plateau region of the LBT isotherm and lower film compressibility. In vivo, both surfactant preparations improved Cdyn at any dose, although maximum benefits in terms of Vv and intrapulmonary surfactant pools were seen with the 200 mg/kg dose in both surfactants. The group of animals treated with 200 mg/kg of Poractant alfa showed a prolonged survival time and rate compared to untreated but ventilated controls, and significantly ameliorated lung injury compared to Calsurf at any dose, including 200 mg/kg. The overall outcomes suggest the pulmonary effects to be dose dependent for both preparations. The group of animals treated with 200 mg/kg of Poractant alfa showed a significant reduction of mortality. Compared to Calsurf, Poractant alfa exerted better effects if licensed doses were compared, which requires further investigation.

Oxysterols Versus Cholesterol in Model Neuronal Membrane. I. The Case of 7-Ketocholesterol. The Langmuir Monolayer Study

Oxysterols are products of cholesterol oxidation. They can be formed endogenously (in both enzymatic and non-enzymatic reactions) as well as exogenously (delivered with food). Recent studies clearly demonstrate cytotoxic properties of these compounds, being mainly due to their incorporation into natural lipid bilayers. This process can influence mechanical and physicochemical properties of biomembrane—mainly by modifying the interactions between its components, which may result in the disruption of proper functioning of cell membrane and could lead to its degradation. Therefore, it can be assumed that oxysterols may affect the initiation of neurodegenerative diseases, including Alzheimer’s disease. However, the mode of action of these molecules at the molecular level is not fully known. To get a better understanding of the role of oxysterols in neurodegeneration, it is of great importance to examine mutual interactions between oxysterols and neuronal membrane components. One of the most promising techniques that can be used to analyze such interactions is the Langmuir monolayer technique. In this work, we have prepared an artificial neuronal membrane modeled as multicomponent Langmuir monolayer built up with cholesterol, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and sphingomyelin (SM). To examine whether there are any changes in the membrane properties under oxidative stress, in this paper we have investigated the impact of the representative ring-oxidized oxysterol: 7-ketocholesterol (7-KC). Our results show that replacing cholesterol with 7-KC increases the interaction between molecules in the model membrane.

Influence of membrane galactolipids and surface pressure on plastoquinone behaviour

In this work biomimetic monolayers of a MGDG, monogalactosyldiacylglycerol, and DGDG, digalactosyldiacylglycerol mixture (MD), in a ratio close to that of the thylakoid membranes of oxygenic photosynthetic organisms, have been prepared. The lipid mixture incorporates plastoquinone-9 (PQ), that is the electron and proton shuttle of the photosynthetic reaction centres. The MD:PQ mixtures have been firstly studied using surface pressure-area isotherms. Langmuir-Blodgett (LB) films of those mixtures have been transferred onto a substrate forming a monolayer that mimics one of the bilayer sides of the thylakoid membranes. These monolayers have been characterized topographically and electrochemically. The results show the influence of PQ in the MD matrix and its partial expulsion when increasing the surface pressure, obtaining two main PQ positions in the MD matrix. The calculated apparent electron transfer rate constants indicate a different kinetic control for the reduction and the oxidation of the PQ/PQH2 couple, being kRapp(I)=0.7·10(-6)s(-1), kRapp(II)=2.2·10(-9)s(-1), kOapp(I)=7.4·10(-4)s(-1) and kOapp(II)=5.2·10(-5)s(-1), respectively. The comparison of the different galactolipid:PQ systems that our group has studied is also presented, concluding that the PQ position in the galactolipid matrix can be tuned according to several controlled variables.

Monogalactosyldiacylglycerol and digalactosyldiacylglycerol role, physical states, applications and biomimetic monolayer films

The relevance of biomimetic membranes using galactolipids has not been expressed in any extensive experimental study of these lipids. Thus, on the one hand, we present an in-depth article about the presence and role of monogalactosyldiacylglycerol (MGDG) and digalactosyldiacylglycerol (DGDG) in thylakoid membranes, their physical states and their applications. On the other hand, we use the Langmuir and Langmuir-Blodgett (LB) techniques to prepare biomimetic monolayers of saturated galactolipids MGDG, DGDG and MGDG:DGDG 2:1 mixture (MD)--biological ratio--. These monolayers are studied using surface pressure-area isotherms and their data are processed to enlighten their physical states and mixing behaviour. These monolayers, once transferred to a solid substrate at several surface pressures are topographically studied on mica using atomic force microscopy (AFM) and using cyclic voltammetry for studying the electrochemical behaviour of the monolayers once transferred to indium-tin oxide (ITO), which has good optical and electrical properties. Moreover, MD presents other differences in comparison with its pure components that are explained by the presence of different kinds of galactosyl headgroups that restrict the optimal orientation of the MGDG headgroups.

Cyclosporin A in Membrane Lipids Environment: Implications for Antimalarial Activity of the Drug--The Langmuir Monolayer Studies

Cyclosporin A (CsA), a hydrophobic cyclic peptide produced by the fungus Tolypocladium inflatum, is well known for its high efficiency as an immunosuppressor for transplanted organs and anti-inflammatory properties; however, it is also active as antiparasitic (antimalarial) drug. Antimalarial mechanism of CsA action lacks a detailed understanding at molecular level. Due to a high lipophilicity of CsA, it is able to interact with lipids of cellular membrane; however, molecular targets of this drug are still unknown. To get a deeper insight into the mode of antimalarial activity of CsA, it is of utmost importance to examine its interactions with membrane components. To reach this goal, the Langmuir monolayer technique, which serves as a very useful, easy to handle and controllable model of biomembranes, has been employed. In this work, the interactions between CsA and main membrane lipids, i.e., cholesterol (Chol), 2-oleoyl-1-palmitoyl-3-phosphocholine (POPC), and sphingomyelin (SM), have been investigated. Attractive interactions are observed only for CsA mixtures with SM, while repulsive forces occur in systems containing remaining membrane lipids. Taking into consideration mutual interactions between membrane lipids (Chol-SM; Chol-POPC and SM-POPC), the behavior of CsA in model erythrocyte membrane of normal and infected cells has been analyzed. Our results prove strong affinity of CsA to SM in membrane environment. Since normal and parasitized erythrocytes differ significantly in the level of SM, this phospholipid may be considered as a molecular target for antimalarial activity of CsA.

Biomimetic monolayer films of digalactosyldiacylglycerol incorporating plastoquinone

The photosynthesis is the process used by plants and bacteria cells to convert inorganic matter in organic thanks to the light energy. This process consist on several steps, being one of them the electronic transport from the photosystem II to the cytochrome thanks to plastoquinone-9 (PQ). Here we prepare membranes that mimic the characteristics and composition of natural photosynthetic cell membranes and we characterize them in order to obtain the PQ molecules position in the membrane and their electrochemical behaviour. The selected galactolipid is digalactosyldiacylglycerol (DGDG) that represents the 30% of the thylakoid membrane lipid content. The results obtained are worthful for several science fields due to the relevance of galactolipids as anti-algal, anti-viral, anti-tumor and anti-inflammatory agents and the antioxidant and free radical scavenger properties of prenylquinones. Both pure components (DGDG and PQ) and the DGDG:PQ mixtures have been studied using surface pressure-area isotherms. These isotherms give information about the film stability and indicate the thermodynamic behaviour of the mixture and their physical state. The Langmuir-Blodgett (LB) film has been transferred forming a monolayer that mimics the bottom layer of the biological membranes. This monolayer on mica has been topographically characterized using AFM and both the height and the physical state that they present have been obtained. Moreover, these monolayers have been transferred onto ITO that is a hydrophilic substrate with good optical and electrical features, so that, it is suitable for studying the electrochemical behaviour of these systems and it is a good candidate for energy producing devices.

Affinity of alkylphosphocholines to biological membrane of prostate cancer: studies in natural and model systems

The effectiveness of two alkylphosphocholines (APCs), hexadecylphosphocholine (miltefosine) and erucylphosphocholine to combat prostate cancer has been studied in vitro with artificial cancerous membrane, modelled with the Langmuir monolayer technique, and on cell line (Du-145). Studies performed with the Langmuir method indicate that both the investigated drugs have the affinity to the monolayer mimicking prostate cancer membrane (composed of cholesterol:POPC = 0.428) and the drug-membrane interactions are stronger for erucylphosphocholine as compared to hexadecylphosphocholine. Moreover, both studied drugs were found to fluidize the model membrane, which may lead to apoptosis. Indeed, biological studies confirmed that in Du-145 cell line both investigated alkylphosphocholines cause cell death primarily by apoptosis while necrotic cells constitute only a small percentage of APC-treated cells.

Structural characterization of a model gram-negative bacterial surface using lipopolysaccharides from rough strains of Escherichia coli

Lipopolysaccharides (LPS) make up approximately 75% of the Gram-negative bacterial outer membrane (OM) surface, but because of the complexity of the molecule, there are very few model OMs that include LPS. The LPS molecule consists of lipid A, which anchors the LPS within the OM, a core polysaccharide region, and a variable O-antigen polysaccharide chain. In this work we used RcLPS (consisting of lipid A plus the first seven sugars of the core polysaccharide) from a rough strain of Escherichia coli to form stable monolayers of LPS at the air-liquid interface. The vertical structure RcLPS monolayers were characterized using neutron and X-ray reflectometry, while the lateral structure was investigated using grazing incidence X-ray diffraction and Brewster angle microscopy. It was found that RcLPS monolayers at surface pressures of 20 mN m(-1) and above are resolved as hydrocarbon tails, an inner headgroup, and an outer headgroup of polysaccharide with increasing solvation from tails to outer headgroups. The lateral organization of the hydrocarbon lipid chains displays an oblique hexagonal unit cell at all surface pressures, with only the chain tilt angle changing with surface pressure. This is in contrast to lipid A, which displays hexagonal or, above 20 mN m(-1), distorted hexagonal packing. This work provides the first complete structural analysis of a realistic E. coli OM surface model.

Interactions of alkylphosphocholines with model membranes-the Langmuir monolayer study

Alkylphosphocholines (APCs) belong to a class of synthetic antitumor lipids, which are new-generation anticancer agents. In contrast to traditional antitumor drugs, they do not attack the cell nucleus but, rather, the cellular membrane; however, their mechanism of action is not fully understood. This work compared the interactions of selected APCs [namely, hexadecylphosphocholine (miltefosine), octadecylphosphocholine and erucylphosphocholine] with the most important membrane lipids [cholesterol, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)] and examined their influence on a model membrane of tumor and normal cells. As a simple model of membranes, Langmuir monolayers prepared by mixing cholesterol either with a saturated phosphatidylcholine (DPPC), for a normal cell membrane, or with an unsaturated one (POPC), for a tumor cell membrane, have been applied. The APC–lipid interactions, based on experimental surface pressure (π) versus mean molecular area (A) isotherms, were analyzed qualitatively (with mean molecular area values) as well as quantitatively (with the ΔG^exc function). Strong attractive interactions were observed for mixtures of APCs with cholesterol, contrary to the investigated phosphatidylcholines, for which the interactions were found to be weak with a tendency to separation of film components. In ternary monolayers it has been found that the investigated model systems (cholesterol/DPPC/APC vs cholesterol/POPC/APC) differ significantly as regards the interactions between film-forming molecules. The results demonstrate stronger interactions between the components of cholesterol/POPC/APC monolayers compared to cholesterol/POPC film, mimicking tumor cell membranes. In contrast, the interactions in cholesterol/DPPC/APC films were found to be weaker than those in the cholesterol/DPPC system, serving as a model of healthy cell membranes, thus proving that the incorporation of APCs is, from a thermodynamic point of view, unfavorable for binary cholesterol/DPPC monolayers. It can be concluded that the composition of healthy cell membranes is a natural barrier preventing the incorporation of APCs into normal cells.

An AFM study of solid-phase bilayers of unsaturated PC lipids and the lateral distribution of the transmembrane model peptide WALP23 in these bilayers

An altered lipid packing can have a large influence on the properties of the membrane and the lateral distribution of proteins and/or peptides that are associated with the bilayer. Here, it is shown by contact-mode atomic force microscopy that the surface topography of solid-phase bilayers of PC lipids with an unsaturated cis bond in their acyl chains shows surfaces with a large number of line-type packing defects, in contrast to the much smoother surfaces observed for saturated PC lipids. Di-n:1-PC (n = 20, 22, 24) and (16:0,18:1)-PC (POPC) were used. Next, the influence of an altered lipid environment on the lateral distribution of the single α-helical model peptide WALP23 was studied by incorporating the peptide in the bilayers of di-n:1-PC (n = 20, 22, 24) and (16:0,18:1)-PC unsaturated lipids. The presence of WALP23 leads to an increase in the number of packing defects but does not lead to the formation of the striated domains that were previously observed in bilayers of saturated PC lipids and WALP. This is ascribed to the less efficient lateral lipid packing of the unsaturated lipids, while the increase in packing defects is probably an indirect effect of the peptide. Finally, the fact that an altered lipid packing affects the distribution of WALP23 is also confirmed in an additional experiment where the solvent TFE (2,2,2-trifluorethanol) is added to bilayers of di-16:0-PC/WALP23. At 3.5 vol% TFE, the previous striated ordering of the peptide is abolished and replaced by loose lines.

Influence of environmental conditions on the interfacial organisation of fengycin, a bioactive lipopeptide produced by Bacillus subtilis

The effect of the environmental conditions both on the behaviour of fengycin at the air-aqueous interface and on its interaction with DPPC was studied using surface pressure-area isotherms and AFM. The ionisation state of fengycin is at the origin of its monolayer interfacial properties. The most organised interfacial arrangement is obtained when fengycin behaves as if having zero net charge (pH 2). In a fully ionised state (pH 7.4), the organisation and the stability of fengycin monolayers depend on the ionic strength in the subphase. This can modulate the surface potential of fengycin and consequently the electrostatic repulsions inside the interfacial monolayer, as well as the lipopeptide interaction with the layer of water molecules forming the air-water interface. Intermolecular interactions of fengycin with DPPC are also strongly affected by the ionisation state of lipopeptide and the surface pressure (Pi) of the monolayer. A better miscibility between both interfacial components is observed at pH 2, while negatively charged lipopeptide molecules are segregated from the DPPC phase. A progressive desorption of fengycin from the interface is observed at pH 7.4 when Pi increases while at pH 2, fengycin desorption brutally occurs when Pi rises above Pi value of the intermediate plateau.

Comparing experimental and simulated pressure-area isotherms for DPPC

Although pressure-area isotherms are commonly measured for lipid monolayers, it is not always appreciated how much they can vary depending on experimental factors. Here, we compare experimental and simulated pressure-area isotherms for dipalmitoylphosphatidylcholine (DPPC) at temperatures ranging between 293.15 K and 323.15 K, and explore possible factors influencing the shape and position of the isotherms. Molecular dynamics simulations of DPPC monolayers using both coarse-grained (CG) and atomistic models yield results that are in rough agreement with some of the experimental isotherms, but with a steeper slope in the liquid-condensed region than seen experimentally and shifted to larger areas. The CG lipid model gives predictions that are very close to those of atomistic simulations, while greatly improving computational efficiency. There is much more variation among experimental isotherms than between isotherms obtained from CG simulations and from the most refined simulation available. Both atomistic and CG simulations yield liquid-condensed and liquid-expanded phase area compressibility moduli that are significantly larger than those typically measured experimentally, but compare well with some experimental values obtained under rapid compression.

Surface rheology and phase transitions of monolayers of phospholipid/cholesterol mixtures

The dynamic surface elasticity and the surface dilational viscosity of three binary phospholipid/cholesterol mixtures were determined with axisymmetric drop shape analysis on a harmonically oscillating pendent drop. Dipalmitoylphosphatidylcholine, dimyristoylphosphatidylcholine, and dioleoylphosphatidylcholine were used to explore the rheological properties and phase transitions of mixtures of saturated and unsaturated phospholipids with cholesterol. The growth rates for surface dilational viscosity and dynamic elasticity are parallel for all film pressures studied. Characteristic breaks and plateaus could be found for these growth rates, indicating phase transitions. For dipalmitoylphosphatidylcholine/cholesterol and dimyristoylphosphatidylcholine/cholesterol mixtures, phase diagrams with six regions separated by phase boundaries were found, which are in good agreement with phase transitions reported in the literature for static measurements of isotherms and isobars on a Langmuir film balance and from fluorescence microscopy. Some phase boundaries were only found by dynamic, but not by static, elasticity measurements. Imaging methods revealed phase separations produced by the formation of condensed stoichiometric complexes leading to micron-sized and mostly circular domains. The effects of these complexes on monolayer rheology in liquid/liquid phases is described. Furthermore, liquid/solid and solid phase transitions are discussed.

Fengycin interaction with lipid monolayers at the air-aqueous interface-implications for the effect of fengycin on biological membranes

In this study, we investigated the interaction of fengycin, a lipopeptide produced by Bacillus subtilis, with lipid monolayers using the Langmuir trough technique in combination with Brewster angle microscopy. Thermodynamic analyses were performed to get further information about the mixing behavior and the molecular interactions between the two components. The effect of fengycin on the structural and morphological characteristics of DPPC monolayers, as a simple model of biological membranes, depends on the fengycin molar ratio. With a small proportion of fengycin (X(f)0.1), the compressibility of the monolayer is modified but the morphological characteristics of the DPPC are not significantly affected. At an intermediate molar ratio (0.1<X(f)0.5), fengycin has a fluidizing effect on the DPPC monolayer by interacting partially with DPPC molecules. At higher molar ratio (X(f)=0.66), fengycin totally dissolves the ordered phase of the lipid. These results highlight the capacity of fengycin to perturb the DPPC organization and are discussed in relation to fengycin capacity to affect biological membranes.

Identification of Lipid Aggregate Structures on TiO2 Surface Using Headgroup IR Bands

Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy was used to study the nature of the dipalmitoylphosphatidylcholine (DPPC) aggregated structures adsorbed on TiO(2). DPPC molecules were assembled on TiO(2) using Langmuir-Blodgett (LB) deposition methods or by directly flowing the DPPC liposome solution across the TiO(2)-coated ATR crystal. We found that there is a direct correlation between the intensity and frequency position of the zwitterionic headgroup IR bands and the nature of LB films. Specifically, we have shown that the bands due to PO(2)(-) modes are sensitive to changes in the degree of hydration of the LB films and that the symmetric deformation vibrational mode (delta(s) (+)N-CH(3)) is sensitive to interaction with oppositely charged surface sites. Using this information, we found that the liposomes adsorbed on TiO(2) remain intact as vesicles and that the vesicles are stable and not removed in flowing water. We have also shown that the antisymmetric deformation vibrational (delta(as) (+)N-CH(3)) modes are sensitive to changes in lateral-lateral DPPC interactions. This information was used to show that there is a lateral interaction between each positively charged (+)N(CH(3))(3) headgroup and negatively charged PO(2)(-) headgroup of the adjacent DPPC molecule in the adsorbed vesicles and LB films. This study provides a framework for the use of this IR technique in studies of adsorption and transport of molecules across membrane interfaces.