Imidazole-based ionogel as room temperature benzene and formaldehyde sensor

A room temperature benzene and formaldehyde gas sensor system with an ionogel as sensing material is presented. The sensing layer is fabricated employing poly(N-isopropylacrylamide) polymerized in the presence of 1-ethyl-3-methylimidazolium ethyl sulfate ionic liquid onto gold interdigitated electrodes. When the ionogel is exposed to increasing formaldehyde concentrations employing N₂ as a carrier gas, a more stable response is observed in comparison to the bare ionic liquid, but no difference in sensitivity occurs. On the other hand, when air is used as carrier gas the sensitivity of the system towards formaldehyde is decreased by one order of magnitude. At room temperature, the proposed sensor exhibited in air higher sensitivities to benzene, at concentrations ranging between 4 and 20 ppm resulting, in a limit of detection of 47 ppb, which is below the standard permitted concentrations. The selectivity of the IL towards HCHO and C₆H₆ is demonstrated by the absence of response when another IL is employed. Humidity from the ambient air slightly affects the resistance of the system proving the protective role of the polymeric matrix. Furthermore, the gas sensor system showed fast response/recovery times considering the thickness of the material, suggesting that ionogel materials can be used as novel and highly efficient volatile organic compounds sensors operating at room temperature.Graphical abstract.

Combined optical and electronic paper-nose for detection of volatile gases

In this work, a paper-based optoelectronic sensor (paper-nose) is presented for sensing volatile gases in air. The proposed optoelectronic sensor is a combination of both colorimetric (optical) and chemiresistive (electronic) sensor arrays in order to improve the selectivity of the paper-nose in the complex air background. The optical sensors are based on chemoresponsive dyes, namely Reichardt's dye (2,6-diphenyl-4-(2,4,6-triphenyl-1-pyridinio)phenolate), bromocresol purple, methyl red, bromothymol blue, brilliant yellow and manganese tetraphenylporphyrin (Mn-TPP). The chemiresistive sensors are based on nanomaterials, such as carbon nanotubes (CNT), PEDOT:PSS, graphite, and an ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMI TFSI). Sensor is fabricated through direct handwriting of sensing materials using a pen on paper without the need of expensive cleanroom facilities. The optoelectronic sensor is tested in ambient air with different volatile gases such as methanol, ammonia, toluene, acetone and ethanol and their mixtures of varying concentrations. The detected electrical and optical responses together form a unique signature for each volatile gas and its mixture. Support-vector machine (SVM) is applied for target classification and detection. From the SVM result, it is found that better discriminative power is achieved by combining optical and electrical responses.