1
|
Hopson C, Rigual V, Alonso MV, Oliet M, Rodriguez F. Eucalyptus bleached kraft pulp-ionic liquid inks for 3D printing of ionogels and hydrogels. Carbohydr Polym 2023; 313:120897. [PMID: 37182980 DOI: 10.1016/j.carbpol.2023.120897] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2022] [Revised: 03/22/2023] [Accepted: 04/07/2023] [Indexed: 05/16/2023]
Abstract
3D printing has been recently recognized as one of the most promising technologies due to the multiple options to fabricate cost-effective and customizable objects. However, the necessity to substitute fossil fuels as raw materials is increasing the research on bio-based inks with recyclable and eco-friendly properties. In this work, we formulated inks for the 3D printing of ionogels and hydrogels with bleached kraft pulp dissolved in [Emim][DMP] at different concentrations (1-4 wt%). We explored each ink's rheological properties and printability and compared the printability parameters with a commercial ink. The rheological results showed that the 3 % and 4 % cellulose-ionic liquid inks exhibited the best properties. Both had values of damping factor between 0.4 and 0.7 and values of yield stress between 1900 and 2500 Pa. Analyzing the printability, the 4 wt% ink was selected as the most promising because the printed ionogels and the hydrogels had the best print resolution and fidelity, similar to the reference ink. After printing, ionogels and hydrogels had values of the elastic modulus (G') between 103 and 104 Pa, and the ionogels are recyclables. Altogether, these 3D printed cellulose ionogels and hydrogels may have an opportunity in the electrochemical and medical fields, respectively.
Collapse
Affiliation(s)
- Cynthia Hopson
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain.
| | - Victoria Rigual
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| | - M Virginia Alonso
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| | - Mercedes Oliet
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| | - Francisco Rodriguez
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| |
Collapse
|
2
|
Zhu H, Cheng Y, Li S, Xu M, Yang X, Li T, Du Y, Liu Y, Song H. Stretchable and recyclable gelatin Ionogel based ionic skin with extensive temperature tolerant, self-healing, UV-shielding, and sensing capabilities. Int J Biol Macromol 2023:125417. [PMID: 37331536 DOI: 10.1016/j.ijbiomac.2023.125417] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Revised: 05/16/2023] [Accepted: 06/13/2023] [Indexed: 06/20/2023]
Abstract
Fabricating sustainable ionic skin with multi-functional outstanding performances using biocompatible natural polymer-based ionogel is highly desired but remains a great challenge up to now. Herein, a green and recyclable ionogel has been fabricated by in-situ cross-linking of gelatin with a green bio-based multifunctional cross-linker of Triglycidyl Naringenin in ionic liquid. Benefiting from the unique multifunctional chemical crosslinking networks along with multiple reversible non-covalent interactions, the as-prepared ionogels exhibit high stretchability (>1000 %), excellent elasticity, fast room-temperature self-healability (>98 % healing efficiency at 6 min), and good recyclability. These ionogels are also highly conductive (up to 30.7 mS/cm at 150 °C), and exhibit extensive temperature tolerance (-23 to 252 °C) and outstanding UV-shielding ability. As a result, the as-prepared ionogel can easily be applied as stretchable ionic skin for wearable sensors, which exhibits high sensitivity, fast response time (102 ms), excellent temperature tolerance, and stability over 5000 stretching-relaxing cycles. More importantly, the gelatin-based sensor can be used in signal monitor system for various human motion real-time detection. This sustainable and multifunctional ionogel provides a new idea for easy and green preparation of advanced ionic skins.
Collapse
Affiliation(s)
- Hongnan Zhu
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China
| | - Yan Cheng
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China
| | - Shuaijie Li
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China
| | - Min Xu
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China
| | - Xuemeng Yang
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China
| | - Tianci Li
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China
| | - Yonggang Du
- School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang, Hebei Province 050043, PR China.
| | - Yanfang Liu
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China
| | - Hongzan Song
- College of Chemistry and Materials Science, Hebei University, Baoding, Hebei Province, 071002, PR China.
| |
Collapse
|
3
|
Yang L, Sun L, Huang H, Zhu W, Wang Y, Wu Z, Neisiany RE, Gu S, You Z. Mechanically Robust and Room Temperature Self-Healing Ionogel Based on Ionic Liquid Inhibited Reversible Reaction of Disulfide Bonds. Adv Sci (Weinh) 2023:e2207527. [PMID: 37127894 PMCID: PMC10369268 DOI: 10.1002/advs.202207527] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/20/2022] [Revised: 04/07/2023] [Indexed: 05/03/2023]
Abstract
Although highly desired, it is difficult to develop mechanically robust and room temperature self-healing ionic liquid-based gels (ionogels), which are very promising for next-generation stretchable electronic devices. Herein, it is discovered that the ionic liquid significantly reduces the reversible reaction rate of disulfide bonds without altering its thermodynamic equilibrium constant via small molecule model reaction and activation energy evolution of the dissociation of the dynamic network. This inhibitory effect would reduce the dissociated units in the dynamic polymeric network, beneficial for the strength of the ionogel. Furthermore, aromatic disulfide bonds with high reversibility are embedded in the polyurethane to endow the ionogel with superior room temperature self-healing performance. Isocyanates with an asymmetric alicyclic structure are chosen to provide optimal exchange efficiencies for the embedded disulfide bonds relative to aromatic and linear aliphatic. Carbonyl-rich poly(ethylene-glycol-adipate) diols are selected as soft segments to provide sufficient interaction sites for ionic liquids to endow the ionogel with high transparency, stretchability, and elasticity. Finally, a self-healing ionogel with a tensile strength of 1.65 ± 0.08 MPa is successfully developed, which is significantly higher than all the reported transparent room temperature self-healing ionogel and its application in a 3D printed stretchable numeric keyboard is exemplified.
Collapse
Affiliation(s)
- Lei Yang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| | - Lijie Sun
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| | - Hongfei Huang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| | - Wenfan Zhu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| | - Yihan Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| | - Zekai Wu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| | - Rasoul Esmaeely Neisiany
- Department of Materials and Polymer Engineering, Faculty of Engineering, Hakim Sabzevari University, Sabzevar, 9617976487, Iran
| | - Shijia Gu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| | - Zhengwei You
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Institute of Functional Materials, Donghua University, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, 2999 North Renmin Road, Shanghai, 201620, P. R. China
| |
Collapse
|
4
|
Arshia MH, Sheshmani S, Shahvelayati AS, Hajiaghababaei L, Allahgholi Ghasri MR. Intercalated chitosan-ionic liquid ionogel in SnO nanoplate: band gap narrow and adsorption-photodegradation process. Int J Biol Macromol 2023; 234:123660. [PMID: 36796564 DOI: 10.1016/j.ijbiomac.2023.123660] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2022] [Revised: 12/30/2022] [Accepted: 02/09/2023] [Indexed: 02/17/2023]
Abstract
Ionogels are a category of hybrid material containing ionic liquid stabilized by polymeric network. These composites have some applications in solid-state, energy storage devices and environmental studies. In this research, chitosan (CS), ethyl pyridinium iodide ionic liquid (IL), and ionogel (IG) consisting of chitosan and ionic liquid were used in the preparation of a SnO nanoplate (SnO-IL, SnO-CS and SnO-IG). For the preparation of the ethyl pyridinium iodide, a mixture of pyridine and iodoethane (1: 2 molar ratio) was refluxed for 24 hours. The ionogel was formed using ethyl pyridinium iodide ionic liquid in chitosan that was dissolved in acetic acid (1 % v/v). By increasing NH3∙H2O, the pH of the ionogel reached 7-8. Then, the resultant IG was mixed with SnO in an ultrasonic bath for 1 h. The microstructure of the ionogel was involved as assembled unit via π-π, electrostatic and hydrogen bonding interactions to be three-dimensional networks. The intercalated ionic liquid and chitosan influenced the stability of the SnO nanoplates and improved band gap values. When chitosan was contained as the interlayer space of the SnO nanostructure, the resulting biocomposite formed a well-ordered flower-like SnO structure. These hybrid material structures were characterized by FT-IR, XRD, SEM, TGA, DSC, BET, and DRS techniques. The changes in the band gap values for photocatalysis applications were investigated. In the case of SnO, SnO-IL, SnO-CS, and SnO-IG, the band gap energy was 3.9, 3.6, 3.2, and 2.8 eV, respectively. The dye removal efficiency of SnO-IG was 98.5, 98.8, 97.9, and 98.4 % via the second-order kinetic model for Reactive Red 141, Reactive Red 195, Reactive Red 198, and Reactive Yellow 18, respectively. The maximum adsorption capacity of SnO-IG was 540.5, 584.7, 1501.5, and 1100.1 mg/g for Red 141, Red 195, Red 198, and Yellow 18 dyes, respectively. Also, an acceptable result (96.47 % dye removal) was obtained with the prepared SnO-IG biocomposite for dye removal from textile wastewater.
Collapse
Affiliation(s)
- Mohammad Hossein Arshia
- Department of Chemistry, College of Basic Sciences, Yadegar-e-Imam Khomeini (RAH) Shahre Rey Branch, Islamic Azad University, Tehran, Iran
| | - Shabnam Sheshmani
- Department of Chemistry, College of Basic Sciences, Yadegar-e-Imam Khomeini (RAH) Shahre Rey Branch, Islamic Azad University, Tehran, Iran.
| | - Ashraf S Shahvelayati
- Department of Chemistry, College of Basic Sciences, Yadegar-e-Imam Khomeini (RAH) Shahre Rey Branch, Islamic Azad University, Tehran, Iran
| | - Leila Hajiaghababaei
- Department of Chemistry, College of Basic Sciences, Yadegar-e-Imam Khomeini (RAH) Shahre Rey Branch, Islamic Azad University, Tehran, Iran
| | - Mohammad Reza Allahgholi Ghasri
- Department of Chemistry, College of Basic Sciences, Yadegar-e-Imam Khomeini (RAH) Shahre Rey Branch, Islamic Azad University, Tehran, Iran
| |
Collapse
|
5
|
Li W, Lin K, Chen L, Yang D, Ge Q, Wang Z. Self-Powered Wireless Flexible Ionogel Wearable Devices. ACS Appl Mater Interfaces 2023. [PMID: 36881511 DOI: 10.1021/acsami.2c19744] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Ionogels are promising soft materials for flexible wearable devices because of their unique features such as ionic conductivity and thermal stability. Ionogels reported to date show excellent sensing sensitivity; however, they suffer from a complicated external power supply. Herein, we report a self-powered wearable device based on an ionogel incorporating poly(vinylidene fluoride) (PVDF). The three-dimensional (3D) printed PVDF-ionogel exhibits amazing stretchability (1500%), high conductivity (0.36 S/m at 105 Hz), and an extremely low glass transition temperature (-84 °C). Moreover, the flexible wearable devices assembled from the PVDF-ionogel can precisely detect physiological signals (e.g., wrist, gesture, running, etc.) with a self-powered supply. Most significantly, a self-powered wireless flexible wearable device based on our PVDF-ionogel achieves monitoring healthcare of a human by transmitting obtained signals with a Bluetooth module timely and accurately. This work provides a facile and efficient method for fabricating cost-effective wireless wearable devices with a self-powered supply, enabling their potential applications for healthcare, motion detection, human-machine interfaces, etc.
Collapse
Affiliation(s)
- Wenhao Li
- Interdisciplinary Research Center of Low-carbon Technology and Equipment, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, P. R. China
| | - Kaibin Lin
- College of Computer Science and Electronic Engineering, Hunan University, Changsha 410082, P. R. China
| | - Lei Chen
- Interdisciplinary Research Center of Low-carbon Technology and Equipment, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, P. R. China
| | | | - Qi Ge
- Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen 518055, P. R. China
| | - Zhaolong Wang
- Interdisciplinary Research Center of Low-carbon Technology and Equipment, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, P. R. China
| |
Collapse
|
6
|
Ge G, Mandal K, Haghniaz R, Li M, Xiao X, Carlson L, Jucaud V, Dokmeci MR, Ho GW, Khademhosseini A. Deep Eutectic Solvents-based Ionogels with Ultrafast Gelation and High Adhesion in Harsh Environments. Adv Funct Mater 2023; 33:2207388. [PMID: 37090954 PMCID: PMC10118073 DOI: 10.1002/adfm.202207388] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Indexed: 05/03/2023]
Abstract
Adhesive materials have recently drawn intensive attention due to their excellent sealing ability, thereby stimulating advances in materials science and industrial usage. However, reported adhesives usually exhibit weak adhesion strength, require high pressure for strong bonding, and display severe adhesion deterioration in various harsh environments. In this work, instead of water or organic solvents, a deep eutectic solution (DES) was used as the medium for photopolymerization of zwitterionic and polarized monomers, thus generating a novel ionogel with tunable mechanical properties. Multiple hydrogen bonds and electrostatic interactions between DES and monomers facilitated ultrafast gelation and instant bonding without any external pressure, which was rarely reported previously. Furthermore, high adhesion in different harsh environments (e.g., water, acidic and basic buffers, and saline solutions) and onto hydrophilic (e.g., glass and tissues) and hydrophobic (e.g., polymethyl methacrylate, polystyrene, and polypropylene) adherends was demonstrated. Also, high stretchability of the ionogel at extreme temperatures (-80 and 80 °C) indicated its widespread applications. Furthermore, the biocompatible ionogel showed high burst pressure onto stomach and intestine tissues to prevent liquid leakage, highlighting its potential as an adhesive patch. This ionogel provides unprecedented opportunities in the fields of packaging industry, marine engineering, medical adhesives, and electronic assembly.
Collapse
Affiliation(s)
- Gang Ge
- Terasaki Institute for Biomedical Innovation, Los Angeles, CA, USA
- Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117583, Singapore
| | - Kalpana Mandal
- Terasaki Institute for Biomedical Innovation, Los Angeles, CA, USA
| | | | - Mengchen Li
- Department of Materials Science & Engineering, University of California-Los Angeles, Los Angeles, CA, USA
| | - Xiao Xiao
- Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117583, Singapore
| | - Larry Carlson
- Institute for Technology Advancement, University of California-Los Angeles, Los Angeles, CA, USA
| | - Vadim Jucaud
- Terasaki Institute for Biomedical Innovation, Los Angeles, CA, USA
| | | | - Ghim Wei Ho
- Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117583, Singapore
| | | |
Collapse
|
7
|
Hopson C, Villar-Chavero MM, Domínguez JC, Alonso MV, Oliet M, Rodriguez F. Cellulose ionogels, a perspective of the last decade: A review. Carbohydr Polym 2021; 274:118663. [PMID: 34702482 DOI: 10.1016/j.carbpol.2021.118663] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2021] [Revised: 08/04/2021] [Accepted: 09/08/2021] [Indexed: 11/19/2022]
Abstract
Cellulose ionogels have been extensively studied due to the variability of their properties and applications. The capability of trapping an ionic liquid in a biodegradable solid matrix without losing its properties makes this type of material a promising substitute for fossil fuel-derived materials. The possibility to formulate ionogels chemically or physically, to choose between different ionic liquids, cellulose types, and the possibility to add a wide range of additives, make these ionogels an adaptable material that can be modified for each target application in many fields such as medicine, energy storage, electrochemistry, etc. The aim of this review is to show its versatility and to provide a summary picture of the advances in the field of cellulose ionogels formulation (chemical or physical methods), as well as their potential applications, so this review will serve as a stimulus for research on these materials in the future.
Collapse
Affiliation(s)
- Cynthia Hopson
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain.
| | - M Mar Villar-Chavero
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| | - Juan C Domínguez
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| | - M Virginia Alonso
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| | - Mercedes Oliet
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| | - Francisco Rodriguez
- Chemical Engineering and Materials Department, Complutense University of Madrid, Av. Complutense S/N, 28040 Madrid, Spain
| |
Collapse
|
8
|
Zhang S, Li Z, Huang P, Lu Y, Wang P. Silica Nanoparticles Reinforced Ionogel as Nonvolatile and Stretchable Conductors. Membranes (Basel) 2020; 10:membranes10110354. [PMID: 33227897 PMCID: PMC7699213 DOI: 10.3390/membranes10110354] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/03/2020] [Revised: 11/12/2020] [Accepted: 11/14/2020] [Indexed: 06/11/2023]
Abstract
Ionogels combine the advantages of being conductive, stretchable, transparent and nonvolatile, which makes them suitable to be applied as conductors for flexible electronic devices. In this paper, a series of ionogels based on 1-ethyl-3-methylimidazolium ethyl-sulfate ([C2mim][EtSO4]) and polyacrylic networks were prepared. Silica nanoparticles (SNPs) were dispersed into the ionogel matrix to enhance its mechanical properties. The thermal, mechanical and electrical properties of the ionogels with various contents of crosslinking agents and SNPs were studied. The results show that a small amount of SNP doping just increases the breaking strain/stress and the nonvolatility of ionogels, as well as maintaining adequate conductivity and a high degree of transparency. Furthermore, the experimental results demonstrate that SNP-reinforced ionogels can be applied as conductors for dielectric elastomer actuators and stretchable wires, as well as for signal transmission.
Collapse
Affiliation(s)
| | - Zhen Li
- Correspondence: (Z.L.); (P.W.)
| | | | | | | |
Collapse
|
9
|
Gil-González N, Benito-Lopez F, Castaño E, Morant-Miñana MC. Imidazole-based ionogel as room temperature benzene and formaldehyde sensor. Mikrochim Acta 2020; 187:638. [PMID: 33146855 DOI: 10.1007/s00604-020-04625-9] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/11/2020] [Accepted: 10/28/2020] [Indexed: 11/26/2022]
Abstract
A room temperature benzene and formaldehyde gas sensor system with an ionogel as sensing material is presented. The sensing layer is fabricated employing poly(N-isopropylacrylamide) polymerized in the presence of 1-ethyl-3-methylimidazolium ethyl sulfate ionic liquid onto gold interdigitated electrodes. When the ionogel is exposed to increasing formaldehyde concentrations employing N2 as a carrier gas, a more stable response is observed in comparison to the bare ionic liquid, but no difference in sensitivity occurs. On the other hand, when air is used as carrier gas the sensitivity of the system towards formaldehyde is decreased by one order of magnitude. At room temperature, the proposed sensor exhibited in air higher sensitivities to benzene, at concentrations ranging between 4 and 20 ppm resulting, in a limit of detection of 47 ppb, which is below the standard permitted concentrations. The selectivity of the IL towards HCHO and C6H6 is demonstrated by the absence of response when another IL is employed. Humidity from the ambient air slightly affects the resistance of the system proving the protective role of the polymeric matrix. Furthermore, the gas sensor system showed fast response/recovery times considering the thickness of the material, suggesting that ionogel materials can be used as novel and highly efficient volatile organic compounds sensors operating at room temperature.Graphical abstract.
Collapse
Affiliation(s)
- Nerea Gil-González
- Ceit, Manuel Lardizabal 15, 20018, Donostia/San Sebastián, Spain
- Universidad de Navarra, Tecnun, Manuel Lardizabal 13, 20018, Donostia/San Sebastián, Spain
| | - F Benito-Lopez
- Analytical Microsystems & Materials for Lab-on-a-Chip (AMMa-LOAC) Group, Microfluidics Cluster UPV/EHU, Analytical Chemistry Department, University of the Basque Country UPV/EHU, Leioa, Spain
| | - E Castaño
- Ceit, Manuel Lardizabal 15, 20018, Donostia/San Sebastián, Spain
- Universidad de Navarra, Tecnun, Manuel Lardizabal 13, 20018, Donostia/San Sebastián, Spain
| | - Maria C Morant-Miñana
- Centre for Cooperative Research on Alternative Energies (CIC energiGUNE), Basque Research and Technology Alliance (BRTA), Alava Technology Park, Albert Einstein 48, 01510, Vitoria-Gasteiz, Spain.
| |
Collapse
|