Ceramic-on-ceramic vs ceramic-on-polyethylene, a comparative study with 10-year follow-up

Predictors of Reoperation and Survival Experience (Minimum 1 Year) for Primary Versus Conversion Total Hip Arthroplasty in Young Patients

BACKGROUND

Total hip arthroplasty (THA), including primary and conversion procedures, is commonly used for many types of joint disease in patients aged below 65 years, though few studies have evaluated THA outcomes in young patients (≤ 40 years old). This study examined a large cohort of patients who underwent THA at a young (≤ 40 years old) age to identify predictors of reoperation and compare survivorship between primary and conversion THAs.

METHODS

A retrospective study was conducted on 497 patients who underwent 612 primary and conversion THAs at 40 years old or younger between 1990 and 2020. Medical records were reviewed to collect patient/surgical data. A multivariable logistic regression model identified independent predictors of reoperation, and Kaplan-Meier analysis with log-rank tests was used to compare survival curves by THA type.

RESULTS

The median age at surgery (interquartile range) was 31 years (25 to 36). The median follow-up time was 6.6 years (range, 3.8 to 10.5). Conversion THAs had an increased rate of both revisions (12.3 versus 5.6%, P = 0.02) and nonrevision reoperations (8.9 versus 3.2%, P = 0.03) compared to primary THAs. A ceramic-on-ceramic articulation (odds ratio: 5.17; P = 0.03) and a higher estimated blood loss (odds ratio: 1.0007; P = 0.03) were independent predictors of reoperation for primary and conversion THA, respectively. Conversion THAs had a lower 15-year survival (77.8 versus 90.8%, P = 0.009) compared to primary THAs.

CONCLUSIONS

Patients ≤ 40 years old who underwent primary and conversion THAs demonstrated an impressive 15-year survival comparable to that of older populations (74 to 93%), while conversion procedures had a higher reoperation rate. Although primary THA may be more ideal, there are promising outcomes for patients who need THA at a younger age than typically implemented, especially for those who are very young (≤ 30 years old).

Comparative postoperative prognosis of ceramic-on-ceramic and ceramic-on-polyethylene for total hip arthroplasty: an updated systematic review and meta-analysis

Objective

To compare the clinical outcomes between ceramic-on-ceramic (CoC) and ceramic-on-polyethylene (CoP) bearing surfaces in patients undergoing total hip arthroplasty (THA) through a pooled analysis and evidence update.

Methods

We performed a systematic literature search using PubMed, Embase, Cochrane Library and Web of Science up to March 2023 for studies that compared the bearing surfaces of CoC and CoP in patients undergoing THA. The primary outcomes were the incidence of common postoperative complications and the rate of postoperative revision. The secondary outcome was the Harris Hip Score.

Results

A total of 10 eligible studies involving 1,946 patients (1.192 CoC-THA versus 906 CoP-THA) were included in the evidence synthesis. Pooled analysis showed no significant difference in the rates of common postoperative complications (dislocation, deep vein thrombosis, infection, wear debris or osteolysis) and of revision. After eliminating heterogeneity, the postoperative Harris Hip Score was higher in the CoC group than in the CoP group. However, the strength of evidence was moderate for the Harris Hip Score.

Conclusion

CoC articulations are more commonly used in younger, healthier, and more active patients. While the performance of conventional polyethylene is indeed inferior to highly cross-linked polyethylene, there is currently a lack of sufficient research comparing the outcomes between highly cross-linked polyethylene and CoC bearing surfaces. This area should be a focal point for future research, and it is hoped that more relevant articles will emerge. Given the limited number of studies included, the heterogeneity and potential bias of those included in the analysis, orthopaedic surgeons should select a THA material based on their experience and patient-specific factors, and large multicentre clinical trials with >15 years of follow-up are needed to provide more evidence on the optimal bearing surface for initial THA.

Comprehensive Review on Biomaterials and Their Inherent Behaviors for Hip Repair Applications

Developing biomaterials for hip prostheses is challenging and requires dedicated attention from researchers. Hip replacement is an inevitable and remarkable orthopedic therapy for enhancing the quality of patient life for those who have arthritis as well as trauma. Generally, five types of hip replacement procedures are successfully performed in the current medical market: total hip replacements, hip resurfacing, hemiarthroplasty, bipolar, and dual mobility systems. The average life span of artificial hip joints is about 15 years, and several studies have been conducted over the last 60 years to improve the performance and thereby increase the lifespan of artificial hip joints. Present-day prosthetic hip joints are linked to the wide availability of biomaterials. Metals, ceramics, and polymers are some of the most promising types of biomaterials; nevertheless, each biomaterial has advantages and disadvantages. Metals and ceramics fail in most applications owing to stress shielding and the emission of wear debris; ongoing research is being carried out to find a remedy to these unfavorable responses. Recent research found that polymers and composites based on polymers are significant alternative materials for artificial joints. With growing research and several biomaterials, recent reviews lag in effectively addressing hip implant materials' individual mechanical, tribological, and physiological behaviors. This Review comprehensively investigates the historical evolution of artificial hip replacement procedures and related biomaterials' mechanical, tribological, and biological characteristics. In addition, the most recent advances are also discussed to stimulate and guide future researchers as they seek more effective methods and synthesis of innovative biomaterials for hip arthroplasty application.

Risk factors for liner wear and head migration in total hip arthroplasty: a systematic review

Total hip arthroplasty (THA) is a successful orthopaedic surgical procedure, and its longevity depends on bearing components and implant fixation. Optimizing polyethylene and ceramics has led to improved wear parameters and contributed to improved long-term outcomes. The present systematic review investigated whether time span from implantation, patient characteristics and performance status exert an influence on liner wear and head migration in THA. This study was conducted in conformity to the 2020 PRISMA guidelines. All the clinical investigations which reported quantitative data on the amount of liner wear and head migration in THA were considered. Only studies which reported quantitative data at least on one of the following patient characteristics were suitable: mean age, mean BMI (kg/m2), sex, side, time span between the index THA and the last follow-up (months) were eligible. A multiple linear model regression analysis was employed to verify the association between patient characteristics and the amount of liner wear and/or head migration. The Pearson Product-Moment Correlation Coefficient was used to assess the association between variables. Data from 12,629 patients were considered. The mean length of the follow-up was 90.5 ± 50.9 months. The mean age of patients at surgery was 58.4 ± 9.4 years, and the mean BMI was 27.2 ± 2.5 kg/m2. 57% (7199 of 12,629 patients) were women, and in 44% (5557 of 12,629 patients) THAs were performed on the left. The mean pre-operative Harris hip score was 46.5 ± 6.0 points. There was evidence of a moderate positive association between the amount of liner wear and the time elapsed between the index surgery to the follow-up (P = 0.02). There was evidence of a moderate positive association between the amount of head migration and the time elapsed between the index surgery to the follow-up (P = 0.01). No further statistically significant association was found. The time elapsed between the index surgery to the follow-up was the most important factor which influence the head migration and liner wear in THA. Patients' characteristics and preoperative physical activity did not influence the amount of head migration and liner wear.

Damage analysis of retrieved BioloxⓇdelta components used in hard and soft bearings

This retrieval study included 43 Biolox delta explants (18 CoC, 25 CoP). Implants were examined macroscopically, whereby damage was evaluated using a semi quantitative scoring system. Confocal microscopy was used to examine wear related damage patterns of the articulating surfaces. Scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) was used to analyze wear marks on the implant surface and wear debris in periprosthetic tissue samples. Raman spectroscopy and X-ray diffraction (XRD) were used to quantify monoclinic zirconia fractions. On all components, in vivo wear resulted predominantly in different damage patterns caused by metal transfer. In CoC bearings stripe wear was additionally detected, and some implants underwent severe damage due to component breakage. The wear scores were higher for CoC components, with no differences between the scores for CoC heads and liners. Wear features caused comparable roughening on implants from CoC and CoP bearings. SEM studies demonstrated that most wear marks were caused by metal debris released from implant components. Grain pull-out was observed in stripe wear regions. Monoclinic phase shift was observed in a similar quantity on components from CoP and CoC bearings. The increase of monoclinic zirconia content around metal deposits was minimal and was more pronounced in areas of stripe wear. The results of this study indicate, that ZTA components in general undergo minimal wear in both, CoC and CoP bearings, however, it is more pronounced in the former. Metal deposits, as the most common wear feature, have no significant effect on monoclinic phase transition. STATEMENT OF SIGNIFICANCE: In this paper, we classify all damage patterns macroscopically according to an established scoring system and assess them regarding surface roughness (confocal microscopy) and monoclinic phase content (Raman spectroscopy) in order to derive the severity for patients. We compare hard-hard and hard-soft bearings and relate damage patterns with metal transfer based on SEM/EDS examinations. Furthermore, we work out correlations between patient-specific data, cause of revision and the physical condition of each individual sample Our cohort consists of 43 Biolox delta retrievals, a comparatively large quantity. In addition, we address current topics such as metal transfer and, based on the classification of damage patterns, provide incentives and/or meaningful focal points for further research.

Revision in Ceramic-on-Ceramic and Ceramic-on-Polyethylene Bearing in Primary Total Hip Arthroplasty with Press-fit Cups: A Systematic Review and Meta-analysis of Different Methodological Study Designs

Background

The influence of bearing on revision, especially in press-fit modular cup total hip arthroplasty (THA), remains underexposed.

Methods

A systematic literature review was conducted in PubMed, Embase, Cochrane Library, and ClinicalTrials.gov in line with the PRISMA guidelines. The primary outcome was overall revision between ceramic-on-ceramic (CoC) and all sorts of ceramic-on-polyethylene (CoPE) bearings. As secondary outcomes complications and reasons for revision were compared between bearings. Outcomes were presented in subgroups based on study design (randomized controlled trials (RCT), non-randomized comparative, and registry studies). The quality of evidence was assessed using the GRADE. The risk of bias was assessed using the Cochrane collaboration's tool and the MINORS criteria.

Results

This meta-analysis included twelve RCTs, three non-randomized comparative studies and two registry studies, including 38,772 THAs (10,909 CoPE and 27,863 CoC). Overall revision showed a lower risk in CoPE compared to CoC in the two registry studies (HR 0.71 (95%CI 0.53; 0.99)) (very low-quality GRADE evidence). In RCTs and non-randomized comparative studies, no difference was observed (low-quality GRADE evidence). Loosening, dislocation, infection, and postoperative periprosthetic fracture showed no significant differences in risk ratio for all designs.

Conclusion

The lower risk of overall revision in registry studies of primary THA with a press-fit modular cup using CoPE bearing compared to CoC should be considered preliminary since this outcome was just slightly significant, based on very low-quality GRADE evidence and based on only two studies with several limitations. Since no difference was observed in the other methodological designs and the separate reasons for revision showed no significant difference in all designs either, no preference for CoC or CoPE can be expressed, and therefore both seem suitable options based on the available literature. More comparative long-term studies are needed to confirm the potential advantages of wear-reduction of both bearings since the currently available literature is limited.

A Rare Case of Adverse Reaction to Metal Debris in a Ceramic-on-Ceramic Total Hip Replacement

Adverse Reaction to Metal Debris (ARMD) is one of the most frequent complications after Total Hip Replacement (THR) and often a cause of surgical revision. This is true especially for implants with Metal-on-Metal (MoM) and Large Diameter Heads (LDHs), which are frequently used to improve stability and reduce the risk of dislocation. However, ARMD is not exclusive to MoM replacement, as it can also occur in other implants such Ceramic-on-Ceramic (CoC), Metal-on-Polyethylene (MoP), and Ceramic-on-Polyethylene (CoP). In these non-MoM implants, ARMD is not caused by the tribo-corrosion between bearing surfaces but, rather, by the fretting at the interface between neck and stem of dissimilar metals. A case of a severe ARMD that happened to a 73-year-old female patient with CoC bearing THR at the right hip is presented in this case report. In this case, the ARMD was misdiagnosed for over a year, resulting in the development of a massive pseudotumor. The treatment of choice was a two-stage revision with the implant of a hip megaprosthesis. After more than 2 years of follow-up, complete recovery of hip Range of Motion (ROM) and normalization of chromium and cobalt levels in blood and urine were achieved. Despite the relatively short follow-up period, this can be considered a successful treatment of a major and misdiagnosed ARMD in a non-MoM hip replacement.

Direct anterior approach hip arthroplasty: How to reduce complications - A 10-years single center experience and literature review

BACKGROUND

The direct anterior approach for total hip arthroplasty (DAA-THA) is increasing in popularity due to some advantages such as less surgical trauma, minimal dissection of soft tissues, shorter rehabilitation times, faster return to daily activities, lower incidence of dislocation. On the other hand, the literature reports a high rate of intraoperative complications, with many different rates and complication types in the published papers.

AIM

To analyze our complications comparing results with the literature; to report measures that we have taken to reduce complications rate.

METHODS

All DAA-THA patients with one year minimum follow up who were operated at a single high-volume centre, between January 2010 and December 2019 were included in this retrospective study. All surgeries were performed using cementless short anatomical or straight stems and press fit cups. Patients’ follow-up was performed, at 6 wk, 3 mo, then annually post-surgery with clinical and radiological evaluation. Primary outcomes were stem revision for aseptic loosening and all-cause stem revision. Second outcome was intra-operative and post-operative complications identification.

RESULTS

A total of 394 patients underwent DDA-THA from January 2010 and December 2019, for a total of 412 hips; twelve patients lost to follow-up and one patient who died from causes not related to surgery were excluded from the study. The average age at the time of surgery was 61 years (range from 28 to 78 years). Mean follow-up time was 64.8 mo (range 12-120 mo). Seven stems were revised. One cortical perforation, one trochanteric and lateral cortical wall intraoperative fracture, one diaphyseal fracture, three clinically symptomatic early subsidence and one late aseptic loosening. We also observed 3 periprosthetic fractures B1 according to the Vancouver Classification. Other minor complications not requiring stem revision were 5 un-displaced fractures of the calcar region treated with preventive cerclage, one early infection, one case of late posterior dislocation, 18 case of asymptomatic stem subsidence, 6 cases of lateral cutaneous femoral nerve dysesthesia.

CONCLUSION

DAA is associated to good outcomes and lower incidence of dislocation. Complication rate can be reduced by mindful patient selection, thorough preoperative planning, sufficient learning curve and use of intraoperative imaging.

Neglected acetabular fracture with hip dislocation in a 34-year-old subject treated with total hip arthroplasty: our experience

Neglected hip fracture-dislocations are rare but still possible clinical situations, especially in developing countries. Some authors described skeletal traction and open reduction with internal fixation as a treatment for the abovementioned conditions. Despite the poor literature about this topic, total hip arthroplasty (THA) may be a feasible option in the treatment of neglected hip fracture-dislocations. We present a case of a 34-year-old Moroccan man reporting a 1-year neglected acetabular fracture with hip dislocation successfully treated with THA. The patient showed a significant improvement of pain, range of motion and his quality of life at 45 days. Our experience shows how a neglected acetabular fracture with hip dislocation can be successfully treated with THA. Considering the complexity of these cases, an accurate preoperative planning is mandatory and the prosthetic components' choice must be customised to the patient.