Current concept in dysplastic hip arthroplasty: Techniques for acetabular and femoral reconstruction

Total hip arthroplasty with porous tantalum trabecular metal pads in patients with Crowe IV developmental dysplasia of the hip: a midterm followup study

PURPOSE

Crowe IV developmental dysplasia of the hip (DDH) is a catastrophic hip disease. Moreover, obtaining ideal clinical efficacy in conventional total hip arthroplasty (THA) is often difficult. In this study, we aimed to assess the mid-term clinical results of THA with porous tantalum trabecular metal (TM) pads for acetabular reconstruction in the treatment of Crowe IV DDH.

METHODS

A cohort of 28 patients (32 hips) diagnosed with Crowe type IV DDH who underwent acetabular reconstruction during THA using TM pads with scheduled follow-up between 2011 and 2018, were included in this study. Eight cases were men and 24 were women, with a mean age of 48.4 years (range, 36-72 years) and a mean follow-up was 74.3 months (range, 42-132 months). All patients underwent acetabular reconstruction using TM pads and total hip replacement with subtrochanteric osteotomy.

RESULTS

At the final follow-up, 28 hips (87.5%) demonstrated mild or no postoperative limping. The Harris Hip Score improved from 58.4 ± 10.6 preoperatively to 85.6 ± 8.9. The mean pain, stiffness, and function scores on the Western Ontario and McMaster University Osteoarthritis index were 86.5 ± 10.2, 87.3 ± 12.4 and 85.4 ± 11.6 respectively. The mean score of patient satisfaction was 90.4 ± 7.6. Additionally, the SF-12 physical summary score was 41.8 ± 5.6 and the SF-12 mental summary score was 51.6 ± 5.4. TM construct survivorship due to all-cause failure was 90.6% at 5 years with 3 hips at risk, 87.5% at 10 years with 4 hips at risk. The survivorship due to failure from aseptic loosening was 96.9% at 5 years with 1hips at risk and 93.75% at 10 years with 2 hips at risk.

CONCLUSION

This study demonstrated satisfactory mid-term clinical and radiological results with the application of TM pads for acetabular reconstruction combined with THA in patients with Crowe IV DDH.

TRIAL REGISTRATION NUMBER

ChiCTR1800014526, Date: 18/01/2018.

Distinctiveness of Femoral and Acetabular Mesenchymal Stem and Progenitor Populations in Patients with Primary and Secondary Hip Osteoarthritis Due to Developmental Dysplasia

Primary hip osteoarthritis (pOA) develops without an apparent underlying reason, whereas secondary osteoarthritis arises due to a known cause, such as developmental dysplasia of the hips (DDH-OA). DDH-OA patients undergo total hip arthroplasty at a much younger age than pOA patients (50.58 vs. 65 years in this study). Recently, mesenchymal stem and progenitor cells (MSPCs) have been investigated for the treatment of osteoarthritis due to their immunomodulatory and regenerative potential. This study identified cells in subchondral bone expressing common MSPC markers (CD10, CD73, CD140b, CD146, CD164, CD271, GD2, PDPN) in vivo and compared the proportions of these populations in pOA vs. DDH-OA, further correlating them with clinical, demographic, and morphological characteristics. The differences in subchondral morphology and proportions of non-hematopoietic cells expressing MSPC markers were noted depending on OA type and skeletal location. Bone sclerosis was more prominent in the pOA acetabulum (Ac) in comparison to the DDH-OA Ac and in the pOA Ac compared to the pOA femoral head (Fh). Immunophenotyping indicated diagnosis-specific differences, such as a higher proportion of CD164+ cells and their subsets in DDH-OA, while pOA contained a significantly higher proportion of CD10+ and GD2+ cells and subsets, with CD271+ being marginally higher. Location-specific differences showed that CD271+ cells were more abundant in the Fh compared to the Ac in DDH-OA patients. Furthermore, immunohistochemical characterization of stromal bone-adjacent cells expressing MSPC markers (CD10, CD164, CD271, GD2) in the Ac and Fh compartments was performed. This research proved that immunophenotype profiles and morphological changes are both location- and disease-specific. Furthermore, it provided potentially effective targets for therapeutic strategies. Future research should analyze the differentiation potential of subsets identified in this study. After proper characterization, they can be selectively targeted, thus enhancing personalized medicine approaches in joint disease management.

Direct Anterior Approach in Total Hip Arthroplasty for Severe Crowe IV Dysplasia: Retrospective Clinical and Radiological Study

Background and Objectives: total hip arthroplasty (THA) for Crowe IV hip dysplasia poses challenges due to severe leg shortening, muscle retraction and bone stock issues, leading to an increased neurological complication, and revision rate. The direct anterior approach (DAA) is used for minimally invasive THA but its role in Crowe IV dysplasia is unclear. This retrospective study examines if DAA effectively restores hip biomechanics in Crowe IV dysplasia patients with <4 cm leg length discrepancy, managing soft tissue and yielding functional improvement, limb length correction, and limited complications. Materials and Methods: 19 patients with unilateral Crowe IV hip osteoarthritis and <4 cm leg length discrepancy undergoing DAA THA were reviewed. Surgery involved gradual soft tissue release, precise acetabular cup positioning, and stem placement without femoral osteotomy. Results: results were evaluated clinically and radiographically, with complications recorded. Follow-up revealed significant Harris Hip Score and limb length discrepancy improvements. Abductor muscle insufficiency was present in 21%. The acetabular component was accurately placed, centralizing the prosthetic joint's rotation. Complications occurred in 16% of cases, including fractures, nerve issues, and infection. DAA in THA showcased positive outcomes for hip function, limb length, and biomechanics in Crowe IV dysplasia. Conclusions: the technique enabled accurate cup positioning and rotation center adjustment. Complications were managed well without implant revisions. DAA is a viable option for Crowe IV dysplasia, restoring hip function, biomechanics, and reducing limb length discrepancy. Larger, longer studies are needed for validation.

The Practicality of the Robotic Total Hip Arthroplasty for the Treatment of Complex Bilateral Adult Hip Dysplasia. Technology Makes It Easy

Adult hip dysplasia provides many challenges for joint surgeons. Due to the abnormal bone morphology and altered biomechanics of the hip, surgeons must ensure accurate implant positioning to avoid postoperative complications. We present a 56-year-old female with a history of bilateral Legg-Calve-Perthes disease and subsequent dysplasia who underwent bilateral total hip arthroplasty using robotic navigation. We highlight the utility of robotic navigation in adult hip dysplasia to improve implant positioning and ensure optimal patient outcomes.

Extra-articular blocking technique for acetabular bone defect reconstruction

The acetabular bone defect reconstruction is of great challenge in total hip arthroplasty (THA). Although several solutions such as autologous bone grafting, trabecular metal augment, or compromising techniques such as the medial protrusion, high inclination angle, and elevated hip center have been raised, their efficacy and reliability have not been fully substantiated. Traditional reconstruction methods may lead to bone resorption, aggravation of bone defects, unequal length of lower limbs, unbalance of hip-spine relationship, increased costs, and so on. Our team proved a new technique named extra-articular blocking to resolve this problem. The extra-articular blocking technique was a simple, economic and effective acetabular reconstructive method to resolve the massive acetabular bone defect in congenital (especially for developmental dysplasia of the hip, DDH), inflammatory, and osteolytic pathologies. This article organized as surgical technique, aims to report the surgical principle, indication, and procedure of using extra-articular blocking technique. With this technique, we have successfully solved the difficult problem of acetabular bone defect reconstruction. We found after 3 months of the surgery, there were fluoroscopic healing and remodeling. And there were no bone loss or graft absorption until the last follow-up as evidenced by radiographic observation. The survival rate of the acetabular component was 100%, no radiolucent line, changes in inclination and anteversion of the shell, as well as migration of the rotation center were identified.

Harnessing joint distraction for the treatment of osteoarthritis: a bibliometric and visualized analysis

Osteoarthritis (OA) stands as a prevalent degenerative joint ailment, demanding immediate attention towards the development of efficacious therapeutic interventions. Presently, a definitive cure for OA remains elusive, and when conservative treatment modalities prove ineffective, resorting to a joint prosthesis becomes imperative. Temporary distraction emerges as a pivotal joint-preserving intervention in human OA patients, conferring both clinical amelioration and structural enhancements. Although extant clinical investigations exist, they are characterized by relatively modest sample sizes. Nonetheless, these studies furnish compelling evidence affirming that joint distraction engenders sustained clinical amelioration and structural refinement. Despite substantial strides in the last decade, a bibliometric analysis of joint distraction within the realm of osteoarthritis treatment research has been conspicuously absent. In this context, we have undertaken a comparative investigation utilizing bibliometric methodologies to scrutinize the landscape of joint distraction within osteoarthritis treatment. Our comprehensive analysis encompassed 469 scholarly articles. Our findings evince a consistent escalation in global research interest and publication output pertaining to this subject. The United States emerged as the frontrunner in international collaboration, publication count, and citation frequency, underscoring its preeminence in this domain. The journal "Osteoarthritis and Cartilage" emerged as the principal platform for disseminating research output on this subject. Notably, Mastbergen SC emerged as the most prolific contributor in terms of authorship. The identified keywords predominantly revolved around non-surgical interventions and joint arthroscopy procedures. This bibliometric analysis, augmented by visual representations, furnishes invaluable insights into the evolutionary trajectory of joint distraction as an osteoarthritis treatment modality spanning from 2003 to 2023. These insights will serve as a compass for the scientific community, facilitating further exploration in this promising domain.

Total hip arthroplasty associated with transverse subtrochanteric shortening osteotomy and conical stem fixation in Crowe type IV hip dysplasia

PURPOSE

Total hip arthroplasty (THA) in high-dislocated hip dysplasia is a surgical challenge, presenting difficulties in the biomechanical reconstruction of the hip. The purpose of the present study is to analyze clinical and radiological outcomes of a series of patients with Crowe type IV hip dysplasia who underwent a THA with transverse subtrochanteric shortening osteotomy and conical stem fixation in our Hip surgery unit.

METHODS

This non-interventional retrospective study included all patients diagnosed with Crowe type IV hip dysplasia who underwent a THA using a subtrochanteric shortening osteotomy and uncemented conical stem fixation between January 1, 2008, and December 31, 2015. Demographic, clinical and radiologic data were analyzed, including Harris Hip Score and Oxford Hip Score.

RESULTS

Seventeen hips in 13 patients were included in the final analysis. All patients were women and mean age was 39 years (range 35-45). Mean follow-up was 5.6 years (range 1-8). Average length of the osteotomy was 3.4 cm (range 3-4.5) and mean lowering of the center of rotation was 5.67 cm (range 3.8-9.1). Mean time for bone union was 5.5 months. No nerve palsy or non-union was detected at the end of follow-up period.

CONCLUSION

The use of cementless conical stem fixation associated with a transverse subtrochanteric shortening osteotomy for treating Crowe type IV hip dysplasia permits to correct the rotational alterations of the femur and provides good stability of the osteotomy, with very low risk of nerve palsy and non-union rates.

Extra-articular Blocking Technique to Resolve Severe Acetabular Bone Defect in Developmental Dysplasia of the Hip

OBJECTIVE

The reconstruction of acetabular bone defect in developmental dysplasia of the hip (DDH) is a great challenge. Although several successful solutions have been raised, their efficacy and reliability have not been fully substantiated. This work aims to present a simple, economic and effective acetabular reconstructive technique to resolve the massive acetabular bone defect in DDH scenario.

METHODS

This is a case series and observational study investigating the effectiveness and safety of extra-articular blocking technique in patients diagnosed as DDH of Crowe type II-III and Hartofilakidis B. Sixteen consecutive patients indicated for extra-articular blocking and treated with total hip arthroplasty were enrolled in this series from January 2019 to August 2020. The outcome measures included the surgical indicators such as acetabular coverage, prosthesis position, operational time, medical cost, and short-term follow-up indicators such as complications profile, patient-reported functional scales, overall recovery after surgery, and radiographic bone integration and remodeling. Their medical documentation and follow-up records were carefully reviewed with ethical approval.

RESULTS

The mean values of postoperative acetabular component inclination and anteversion were 42.3° ± 2.1° and 16.4° ± 1.8°, with an average acetabular coverage of 92.1%. The mean cost reduction for patients treated with this technique compared with those treated with trabecular metal augmentation was 15.3%. The mean time until walking under full-weight bearing decreased by 3.5 weeks compared with patients treated with autologous bone grafting. Within an average observational period of 18 months, the mean improvements in Harris hip score and WOMAC score were 31 and 22 points, respectively, which were identical to those with bone graft and metal augmentation techniques. No complications such as dislocation, acetabular loosening, periprosthetic joint infection, and limb length discrepancy were recorded. No signs of translucent line formation, third-party reaction, and wear-associated osteolysis were identified.

CONCLUSION

The extra-articular blocking can work simply and effectively to address acetabular bone defect in DDH patients of Crowe II-III and Hartofilakidis B, as evidenced by cost-effectiveness and instant weight-bearing advantages, low failure rate, and early osteointegration and remodeling.

A Deep Learning Algorithm for Radiographic Measurements of the Hip in Adults-A Reliability and Agreement Study

Hip dysplasia (HD) is a frequent cause of hip pain in skeletally mature patients and may lead to osteoarthritis (OA). An accurate and early diagnosis may postpone, reduce or even prevent the onset of OA and ultimately hip arthroplasty at a young age. The overall aim of this study was to assess the reliability of an algorithm, designed to read pelvic anterior-posterior (AP) radiographs and to estimate the agreement between the algorithm and human readers for measuring (i) lateral center edge angle of Wiberg (LCEA) and (ii) Acetabular index angle (AIA). The algorithm was based on deep-learning models developed using a modified U-net architecture and ResNet 34. The newly developed algorithm was found to be highly reliable when identifying the anatomical landmarks used for measuring LCEA and AIA in pelvic radiographs, thus offering highly consistent measurement outputs. The study showed that manual identification of the same landmarks made by five specialist readers were subject to variance and the level of agreement between the algorithm and human readers was consequently poor with mean measured differences from 0.37 to 9.56° for right LCEA measurements. The algorithm displayed the highest agreement with the senior orthopedic surgeon. With further development, the algorithm may be a good alternative to humans when screening for HD.

Acetabular reconstruction with femoral head autograft in primary total hip arthroplasty through a direct anterior approach is a reliable option for patients with secondary osteoarthritis due to developmental dysplasia of the hip

BACKGROUND

Developmental dysplasia is challenging to treat with total hip arthroplasty via the direct anterior approach (DAA). Reconstructing the former anatomy while restoring the acetabular bone stock for future revisions in this young patient collective combined with the known advantages of the DAA would be desirable. The purpose of this study was to analyze the feasibility, radiographic outcome and clinical outcome of primary uncemented total hip arthroplasty with bulk femoral head autograft for acetabular augmentation through a DAA with a minimal follow-up of 12 months.

METHODS

A retrospective, consecutive series from March 2006 to March 2018 of 29 primary total hip arthroplasty with acetabular augmentation with bulk femoral head autograft through a direct anterior approach was identified. All complications, reoperations and failures were analyzed. Radiographic and clinical outcome was measured.

RESULTS

24 patients (29 hips) with a mean age of 43 (18-75) years and a mean follow-up of 35 months (12-137) were included. Surgical indication was secondary osteoarthritis for developmental dysplasia of the hip (Hartofilakidis Grade A (n = 19), B (n = 10)) in all cases. We noted no conversion of the approach, no dislocation and no acetabular loosening. The center of rotation was significantly distalized by a mean of 9 mm (0-23) and significantly medialized by a mean of 18 mm (6-29). The bone graft was fully integrated after 12 months in all cases.

CONCLUSION

Acetabular reconstruction with femoral head autograft in primary THA through a direct anterior approach seems to be a reliable option for the treatment of secondary osteoarthritis in patients with DDH Hartofilakidis grade A and B. Prospective cohort studies with a large sample population and a long-term follow-up are necessary to confirm our findings.

Previous corrective osteotomies of femur and pelvis are a risk factor for complications following total hip arthroplasty in hip dysplasia

Background

Modified anatomy of dysplastic hips, bone defects and previous operations make THA (total hip arthroplasty) in patients with hip dysplasia a technically challenging procedure.

Methods

One hundred and ten patients (mean 49.2 years of age, range 19-76, female:103, male:7) underwent 122 subsequent hip arthroplasties from 2012 to 2019. These patients were reviewed at least two years after THA. Plain radiography was used to determine Crowe classification of the affected hips. Fifty-three patients had an operation in childhood before THA was done (mean 47.0 years of age, standard deviation 8.3, range 19-62) and formed the "operated group". Among these patients, there were Chiari pelvic osteotomies, periacetabular osteotomies, femoral osteotomies, greater trochanter distalizations and soft tissue operations. Fifty-seven were not operated in childhood (mean 52.3 years of age, standard deviation 10.9, range 19-76) and formed the "non operated group". The functional status of the patients was assessed with the Oxford Hip Score (OHS).

Results

122 total hip arthroplasties were performed using uncemented femoral and acetabular components. There were 13 major complications identified. Ten were in the "operated group", of which 5 needed revision surgery. Only 3 were in the "non operated group", with no need for revision. Aseptic loosenings of the femoral component were seen in the patients that had femoral osteotomy done in childhood. Acetabular component migration and intrapelvic migration occurred due to the initial malposition and lack of osteointegration, thus requiring early revision after just 6 months. Other major complications were peroneal palsy, deep periprosthetic infection, severe trochanteritis and intraoperative femoral fracture. OHS was significantly higher in the "non operated group" 42.3 (10-48), opposed to 39.1 (10-48) in the "operated group" (p 0.017).

Conclusion

Corrective osteotomies in childhood are a risk factor for complications and lower medium-term survivorship of the THA in hip dysplasia patients.

Assessment of the endoprosthesis offset in a dysplastic coxarthrosis

Incorrectly developed acetabulum and subluxated hip joint may cause many problems for proper implantation of endoprosthesis. The aim of this work is to assess the radiological results of offset restoration and selection of endoprosthesis implant in a dysplastic hip joint. The study group consisted of patients who had a surgery in the period between 2016 and 2018. All of them had a cementless total hip endoprosthesis. The group consisted of 91 patients (96 hip joints), with an average age of 42 years (31-47 years). 55 left and 41 right hip joints. 70 females and 21 males. The control group consisted of patients who were not diagnosed with hip joint dysplasia. The control group consisted of 70 patients (70 hip joints), with an average age of 35 years (19-55 years). 53 females and 17 males. The radiographic assessment included the measuring of medialization and distalization which describe the offset of hip joint. The joint decentration was classified according to Crowe. Based on radiographic measurements we have achieved statistically significant (p<0.05) changes in medialization and distalization parameters. We have not noticed a statistically significant difference for medialization parameter (p=0.8259) after a surgery when compared to the control group. For all patients we have achieved a restoration of correct offset in the horizontal plane. The main idea behind endoprosthesis in a dysplastic coxarthosis is the implantation of endoprosthesis cup in an anatomically correct location. Small screw- in cup and conical stem offer great possibility of restoring correct offset of a dysplastic hip joint.

Impaction Grafting Is Sufficient to Address Acetabular Deficiency During Total Hip Arthroplasty of Most Dysplastic Hips With Over 30% Bone Defect

BACKGROUND

Addressing acetabular deficiency during arthroplasty of dysplastic hips is challenging. We assessed outcomes of a protocol for choosing either impaction or structural graft for this purpose.

METHODS

This retrospective study included 59 patients (71 hips) with a dysplastic hip and over 30% uncoverage that underwent cementless total hip arthroplasty. Morselized impaction grafting was performed for hips where initial stability of the acetabular cup was achieved. In others, a shelf graft was inserted before implantation of the acetabular cup. Outcomes were assessed at a minimum follow-up of 4 years.

RESULTS

Fifty-seven (80.3%) hips underwent impaction grafting and 14 (19.7%) received a structural graft. Mean age at surgery was 48.1 ± 13.5 (18-68) years for impaction and 48.6 ± 14 (24-70) years for shelf grafts. Mean increase in Harris Hip Score was 51.5 ± 9.3 and 50 ± 11.2 for the impaction and structural groups, respectively, at a mean follow-up of 92 (49-136) months (P = .6). Heterotopic ossification occurred in 16 patients in the impaction group vs none in the structural group (P = .004). Radiologically, mean percentages of cup coverage provided by the graft were 47.8 ± 10.9% and 48.9 ± 13.3% in the impaction and structural groups, respectively (P = .75). All but one of shelf grafts united to host bone and all impaction grafts incorporated. There was one case of cup loosening in the structural graft group.

CONCLUSION

Most dysplastic acetabula with over 30% defect can be addressed using a cementless cup and impaction grafting, with good results in the midterm. In about 20% of cases, initial press-fit is not attainable and structural support-like shelf graft becomes necessary.

LEVEL OF EVIDENCE

IV.

Adult presentation of severe sequelae of Tom Smith arthritis treated with bilateral total hip arthroplasty: A case report

Introduction and importance

Tom Smith arthritis (TSA) is a pyogenic arthritis of the hip joint that occurs in infancy and has considerable morbidity. Reports on surgical management of severe hip dysplasia in adulthood secondary to TSA are extremely limited. We describe a patient who successfully underwent a bilateral total hip arthroplasty for the severely damaged hip joints secondary to TSA with satisfactory functional outcomes.

Case presentation

A 25-year-old female was unable to walk for more than 10 ft due to pain in both hips and knees predominantly on the left side. She developed pyogenic septic arthritis with sepsis at 6 weeks of age and underwent multiple surgical procedures to drain the infection and for reconstruction. She had limited range of motion and was severely disabled. She underwent an uneventful left total hip arthroplasty and two years later, a right total hip arthroplasty using S-ROM modular hip systems. The pre and post-operative Harris Hips scores were 53.4 (left), 46 (right) and 95.7 (left), 89.65 (right), respectively.

Clinical discussion

Detailed preoperative evaluation of the anatomy was paramount. Assessment of the limb-length discrepancy by means of scanogram, templating the anatomy with computed tomography and planning the anatomical location of the centre of the relocated hip were mandatory.

Conclusion

Bilateral total hip arthroplasty is a feasible option to manage the rare occurrence of severely damaged bilateral hip joints caused by TSA presenting in adulthood. Reconstructive options for late sequelae should be individualized based on the degree of involvement, hip stability, and patient expectations.

•

Reconstructive options for late sequelae of Tom Smith arthritis should be individualized.

•

Pre-operative assessment with scanogram and computed tomography is paramount.

•

Bilateral total hip arthroplasty is a feasible option for severe late sequalae of Tom Smith arthritis.

Biomechanical effect of metal augment and bone graft on cup stability for acetabular reconstruction of total hip arthroplasty in hip dysplasia: a finite element analysis

Background

Different methods of acetabular reconstruction with total hip arthroplasty (THA) for Crowe II and III of adult developmental dysplasia of the hip (DDH) acetabular bone defect have been implemented clinically. However, the biomechanical effect of different augmented materials for acetabular reconstruction in THA on shell stability has never been discussed.

Methods

In the present study, autologous bone graft (BG)and metal (Ti6Al4V) augment (MA) were simulated with several acetabular bone defect models of DDH in THA. The contact pressure and micromotion between the shell and host bone were measured for evaluating the shell stability using a finite element method.

Results

The peak contact stress between shell and host bone was higher in the MA situation (12.45 vs 8.71 MPa). And the load transfer path was different, for BG models, the high local contact stresses were found at the junction of bone graft and host bone while for MA models the concentrated contact stresses were at the surface of MA. The peak relative micromotion between shell and host bone was higher in the MA situation (12.61 vs 11.13 µm). However, the peak micromotion decreased in the contact interface of MA and cup compared to the BG models.

Conclusions

The higher micromotion was found in MA models, however, enough for bone ingrowth, and direct stronger fixation was achieved in the MA-cup interface. Thus, we recommended the MA can be used as an option, even for Crowe III, however, the decision should be made from clinical follow-up results.

Greater trochanter morphology and association with patient demographics, surgical factors, and post-operative stem position: a retrospective assessment of 150 cementless THRs in 135 dogs

Background

Total hip replacement (THR) in the gold standard surgical treatment for the canine hip. While it has been shown that greater trochanter morphology affects post-operative cementless stem position in humans, trochanter morphology and the effect on cementless stem position has not been extensively evaluated in dogs. The objective of this study was to classify greater trochanter morphology and identify potential associations between trochanter morphology and patient demographics, femoral canal geometry, surgical time, technique modifications, and post-operative stem position in client-owned dogs undergoing cementless THR.

Results

In this retrospective study, medical records and radiographs of 135 dogs undergoing 150 cementless total hip replacements from 2013 to 2020 were included. Trochanters were classified in the frontal plane using an ordinal grading system adapted from human THR. A Grade I trochanter denoted a trochanter positioned lateral to the periosteal surface of the lateral femoral cortex, whereas a Grade IV trochanter denoted a trochanter positioned medial to the anatomic axis of the femur. Associations between trochanter grade and other variables were examined using ANOVA, Kruskall-Wallis, or chi-squared tests. Significance was assumed at P ≤ .05.

Trochanters were classified as follows: Grade I (44/150, 29.3%), Grade II (56/150, 37.4%), Grade III (44/150, 29.3%), Grade IV (6/150, 4.0%). Grade IV trochanters had lower anatomic lateral distal femoral angle (aLDFA; 91.0 ± 6.2°), angle of inclination (117.7 ± 10.5°), and canal flare index (1.53 ± 0.27). When compared to all groups, Grade IV trochanters were associated with longer surgical times (Grade IV: 227.0 ± 34.2 min; all grades: 183.2 ± 32.9 min) and technique modifications (Grade IV: 83.3%; all grades: 18%). Grade I trochanters had stems placed in valgus (− 1.8 ± 2.33°), whereas Grade II (0.52 ± 2.36°), III (0.77 ± 2.58°), and IV (0.67 ± 2.73°) trochanters exhibited varus stems. Depth of stem insertion was greater (11.2 ± 4.2 mm) for Grade IV trochanters.

Conclusions

Trochanter grade was associated with post-operative stem alignment and translation in the frontal plane. Grade IV trochanters were associated with altered femoral geometry, increased surgical time, technique modifications, and stem insertion depth. Pre-operative greater trochanter classification may prove useful in identifying cases requiring prolonged surgical times or technique modifications.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12917-022-03174-y.

Comparing Hip Dysplasia in Dogs and Humans: A Review

Hip dysplasia (HD) is common in both humans and dogs. This interconnection is because humans and dogs descended from a common ancestor and therefore have a similar anatomy at micro- and macroscopic levels. Furthermore, dogs are the animals of choice for testing new treatments for human hip dysplasia and orthopedic surgery in general. However, little literature exists comparing HD between the two species. Therefore, the aim of this review is to describe the anatomy, etiology, pathogenesis, diagnostics, and treatment of HD in humans and dogs. HD as an orthopedic condition has many common characteristics in terms of etiology and pathogenesis and most of the differences can be explained by the evolutionary differences between dogs and humans. Likewise, the treatment of HD shows many commonalities between humans and dogs. Conservative treatment and surgical interventions such as femoral osteotomy, pelvic osteotomy and total hip arthroplasty are very similar between humans and dogs. Therefore, future integration of knowledge and experiences for HD between dogs and humans could be beneficial for both species.

False acetabulum is preoperative guidance for Crowe type IV hips on hip reduction without femoral shortening during total hip arthroplasty

Background

We aimed to analyze if the false acetabulum is a good indicator for determining femoral shortening.

Methods

We retrospectively included 102 patients with unilateral Crowe type IV developmental dysplasia who underwent primary total hip arthroplasty from April 2008 to May 2019. Based on the presence of false acetabulum, the 102 hips were further classified Crowe IVA group and Crowe IVB group. Radiographic measurement included the height of greater trochanter (HGT) preoperatively and postoperatively, which reflected the distalisation of greater trochanter (DGT). Harris hip score (HHS), limb length discrepancy (LLD), and complications were collected as clinical evaluation.

Results

Sixty hips were classified into Crowe IVA group, and 42 hips were classified into Crowe IVB group. Within Crowe IVA group, the proportion of hips treated with subtrochanteric osteotomy was significantly higher than that in Crowe IVB group (97% vs. 12%) (P < 0.001). The DGT in Crowe IVA group was also greater (67 vs. 32 mm) (P < 0.001). At last follow‐up, both two groups obtained excellent clinical scores. There was no significant difference in postoperative LLD between the two groups (P = 0.001). Six dislocations occurred and three patients developed femoral nerve palsy, while all recovered in a year.

Conclusion

The false acetabulum is a promising and good indicator for determining femoral shortening.

Clinical evaluation of direct anterior approach total hip arthroplasty for severe developmental dysplasia of the hip

It is challenging to treat developmental dysplasia of the hip (DDH) classified Crowe III-IV using direct anterior approach (DAA) total hip arthroplasty (THA), and very little is known on its outcome. This study aimed to investigate the clinical result in this defined disorder with DAA versus posterolateral approach. Twenty-three consecutive hips with Crowe III-IV DDH who underwent DAA were retrospectively evaluated from 2016 through 2018. Outcomes were primarily assessed by HHS, WOMAC, and SF-12 physical scales. The second evaluations included leg length discrepancy, hip muscle strength, radiographic review, complications, and limp recovery. Results were compared to a control cohort of 50 hips underwent posterolateral THA concurrently within the observational period. At last follow-up (DAA 28.5 months; PLA 39.0 months), the mean increase of the HHS for DAA was 48.2 and 30.3 for PLA (p = 0.003). The improvement in WOMAC score in DAA cohort was 15.89 higher that of the PLA cohort after adjusting preoperative difference [R2 = 0.532, P = 0.000, 95% CI (10.037, 21.735)]. DAA had more rapid recovery of hip abductor strength at 1-month (p = 0.03) and hip flexor strength at 3 months (p = 0.007) compared to PLA. No significant differences were found in the radiographic analysis with the exception of increased acetabular anteversion in the DAA cohort (p = 0.036). Satisfactory improvement in limp, indicated by the percentage of limp graded as none and mild to the total, was much higher in DAA cohort (97.6%), compared to that of PLA cohort (90.0%, p = 0.032). DAA for high-dislocated dysplasia demonstrate a significant improvement in clinical result comparable to posterolateral approach. Improved clinical outcome in terms of increased HHS and WOMAC scores, rapid recovery of hip abductor and flexor strength, and enhanced limp recovery without an increased risk in complications, could be acquired when the surgeons were specialized in this approach.

Bilateral Total Hip Arthroplasty in the Setting of Developmental Dysplasia of the Hip and Extreme Hip Flexion Requirements due to Phocomelia

Phocomelia is a rare congenital birth defect marked by hypoplastic or markedly absent limbs. Developmental dysplasia of the hip (DDH) is a congenital disorder with a failure of the native acetabulum to provide complete coverage over the femoral head. The secondary osteoarthritis that develops from DDH is technically challenging for orthopedic surgeons because of distorted anatomy. The present case describes the diagnosis of Crowe 3 DDH in a phocomelia patient with hyperflexion requirements who successfully underwent staged bilateral total hip arthroplasty via a direct anterior approach. It highlights the utility of preoperative computerized tomography and intraoperative computer navigation to assist in implant placement. Recognizing difficult arthroplasty cases in advance is imperative as these cases may require great expertise and more extensive surgical planning.

Acetabulum Reconstruction with TantalumCup and Augments in Dysplastic Hip Type 4 using 3D Printing Technology

Introduction

Acetabular reconstruction in a patient with neglected DDH during complex primary total hip replacement is a challenging procedure to do. We are reporting assessment of acetabular defect in one such patient with pre-operative 3D printing, followed by reconstruction with trabecular metal shell and augments.

Case Report

A 32-year-old female with neglected DDH (Crowe's type 4) reported to us with pain, limp, and shortening of affected limb. Operated somewhere else with THR, she had a missing acetabular component and coral stem in situ at the time of presentation. Acetabular defect was assessed by 3D printing of pelvis following which acetabular reconstruction with tantalum cup and augments along with femoral stem revision was done.

Conclusion

This study confirmed the role of 3D printing pelvis model in meticulous pre-operative planning in patients with complex hip deformities. Reconstruction of acetabular defects with tantalum cup, and augments is a reasonable solution to achieve better function.

Controlled fracture of the medial wall versus structural autograft with bulk femoral head to increase cup coverage by host bone for total hip arthroplasty in osteoarthritis secondary to developmental dysplasia of the hip: a retrospective cohort study

Background

Many methods have been proposed to increase cup coverage by host bone during primary total hip arthroplasty (THA) in hip osteoarthritis secondary to developmental dysplasia of the hip (DDH). However, there was no study comparing the results of controlled fracture of the medial wall with a structural autograft with a bulk femoral head.

Methods

Sixty-seven hips classified as Crowe II/III were retrospectively included in this cohort study, which consisted of 33 controlled fractures (group A) and 34 structural autografts (group B). The Harris Hip Scores (HHS) were recorded. The radiological assessments were analyzed. Also, complications are assessed. The paired-sample t test was used for data analysis before and after the operation, while the independent sample T test was used for the comparison between the two groups. The Pearson chi-square test or the Fisher exact test was used to analyze the qualitative comparative parameters. Kaplan-Meier was utilized in the analysis of survivorship with the end points as a revision for any component.

Results

All patients were reconstructed acetabulum at the anatomical location. HHS increased greatly for both groups (p = 0.18). No statistic difference was observed for the two groups in postoperative leg-length discrepancy (0.51 ± 0.29 cm for group A and 0.46 ± 0.39 cm for group B, p = 0.64 ), postoperative height of the hip center (2.25 ± 0.42 cm for group A and 2.09 ± 0.31 cm for group B, p = 0.13), and inclination of the cup (39 ± 4° for group A and 38 ± 3° for group B, p = 0.65 ). The rate of cup coverage for group B (94 ± 2%) was better than for group A (91 ± 5%), (p = .009). The rate of cup protrusio was 48 ± 4% for group A. For both groups, no statistical difference was observed in the cup diameter (p > .05), while group A showed less operation time than group B (p < .001). No complications were observed at the latest follow-up.

Conclusion

Controlled fracture of the medial wall to increase cup coverage by host bone at the anatomical location can act as an alternative technique for DDH Crowe II/III with the advantage of shorter operation time and less technically demanding.

Direct Anterior Approach in Crowe Type III-IV Developmental Dysplasia of the Hip: Surgical Technique and 2 years Follow-up from Southwest China

OBJECTIVES

To summarize our pioneering surgical practice and clinical outcome of Crowe type III-IV developmental dysplasia of the hip (DDH) with a direct anterior approach total hip arthroplasty in a single teaching hospital in Southwest China.

METHODS

Fourteen patients (15 hips) diagnosed with Crowe type III-IV developmental dysplasia of the hip were involved in this single-center retrospective study between 2016 and 2018. A comprehensive surgical procedure, including preoperative planning and algorithms for leg length equalization, intraoperative stepwise soft tissue release, bone defect reconstruction, and an innovative subtrochanteric osteotomy, was described. Furthermore, advancements in intraoperative CT guidance, computer navigation, and nerve monitoring were available for specific demands. The short-term clinical outcome was evaluated at the endpoint of follow-up by three patient-reported functional scales (Harris, WOMAC, and SF-12 scores), and objective data collected at the clinic, including functional recovery (muscle strength of hip flexor and abductor, correction of the pelvic tilt, leg length discrepancy, and limp), radiographic analysis, and complication occurrence.

RESULTS

The intraoperative variables were carefully recorded. The mean operating times in Crowe type III and IV groups were 115.8 min and 156.2 min, and the median blood loss volumes were 520.5 mL and 810.2 mL, respectively. The general changes in the Harris, SF-12, and WOMAC scores of the two groups were 46.2, 8.7 and 134.3, respectively, at a mean follow-up of 25.4 months. Enhanced recovery of hip abductor muscle strength was identified in 85.7% of the population at the third postoperative month. The equalization of leg length and correction of the pelvic tile were observed at the sixth postoperative month, with a 36-mm decrease in leg length discrepancy. No radiographic evidence of the loosening or migration of the components was observed. A self-innovated subtrochanteric shortening osteotomy was performed in five patients, and they healed after 6 months. Specific complications included two cases of distal femoral cracks and one case of a periprosthetic fracture needing internal fixation. Two patients received a late iliotibial band release at the 3rd month postoperatively due to progressive genu valgum. No records of infection, dislocation, nerve palsy, bone non-union, or revision surgery were identified.

DISCUSSION

The direct anterior approach total hip arthroplasty showed potential advantages, including optimum component positioning, improved hip stability, steerable complication rate, and enhanced functional recovery with Crowe type III-IV DDH. The short-term outcome is comparable to that of the traditional posterolateral approach.

Direct anterior approach total hip arthroplasty for Crowe III and IV dysplasia

High-dislocated hip dysplasia is challenging to treat with total hip arthroplasty via the direct anterior approach (DAA). The DAA has potential advantages including optimizing component positioning, enhanced hip stability, and a more rapid postoperative recovery. We present a surgical technique for DAA total hip arthroplasty for hip dysplasia that includes preoperative planning, soft tissue releases, subtrochanteric osteotomy, component placement, and intraoperative nerve monitoring and imaging. This technique provides detailed technical instructions, specifically including pearls and pitfalls, and complication prevention strategies.

Thoracic vertebra fixation with a novel screw-plate system based on computed tomography imaging and finite element method

BACKGROUND AND OBJECTIVE

The traditional pedicle screw-rod internal fixation system has been widely used for thoracic diseases in clinical practice, but its high profile increases the damage to soft tissue, leading to long-term intractable back stiffness. The purpose of this study is to compare biomechanical advantages between the new spine pedicle screw-plate internal fixation system and traditional pedicle screw-rod internal fixation system using finite element analysis.

METHODS

Based on computed tomography (CT), four three-dimensional finite element models of T7-T9 were constructed. The downward concentrated force of 150 N and the moment of 5 Nm was applied to the models to simulate six physiological activities, including flexion, extension, left and right lateral bending, left and right axial torsion. The maximum displacement, range of motion (ROM) and maximum stress of the two models in six physiological activities, was measured to evaluate the biomechanical advantages of the novel pedicle screw-plate internal fixation system.

RESULTS

The novel pedicle screw-plate internal fixation system has a lower profile than the traditional pedicle screw-rod internal fixation system. With regards to the stability, the maximum displacement of the models of two internal fixation systems decreased by 56.2%-91.4% under the six motion status when comparing with the unstable model. Meanwhile, the ROM remained unchanged between the two models of internal fixation systems besides the left lateral bending. However, there is no significant difference in the ROM between the models of the two internal fixation systems in left lateral bending motion (P = 0.203). In terms of the strength, the maximum stress in the model with the new pedicle screw-plate internal fixation system was higher than that of model with the traditional pedicle screw-rod internal fixation system in every motion status but left and right lateral bending motion.

CONCLUSIONS

The novel pedicle screw-plate internal fixation system has lower profile in orthopedics and higher strength, However, it has no disadvantage when comparing with the traditional pedicle screw-rod internal fixation system in terms of the stability. In summary, we suggest that the novel spine pedicle screw-plate system can be used as a new internal fixation and provide better comfort for patients.

Using Imageless Optical Navigation to Identify the New Hip Center in Crowe IV Dysplasia

In total hip arthroplasty for patients with acetabular dysplasia, cup placement in the native acetabulum is preferred to placement in the pseudoacetabulum. Identifying the true acetabulum may prove challenging. In a patient with Crowe IV dysplasia, 3-dimensional mini-optical navigation was used to match the new hip center to the preoperative radiographic plan, which was identified to be 34 mm inferior to the pseudoacetabulum. This allowed titration of femoral shortening to 20 mm, to arrive at final limb lengthening of 14 mm. Although the use of other enabling technologies in hip dysplasia has been reported, to the authors' knowledge, this is the first reported case demonstrating the use of imageless optical navigation in this setting. It is a navigational tool with a small spatial footprint, does not mandate preoperative axial studies, and does not require multipoint bone surface registration. Imageless navigation may be a useful option for cup positioning and subsequent titration of femoral shortening in the reconstruction of Crowe IV dysplastic hips with degenerative joint disease. [Orthopedics. 2020; 43(2):e119-e122.].

Total hip arthroplasty in an adult patient with pelvic dysmorphism, unilateral sacroiliac joint autofusion, and developmental hip dysplasia

This case describes the challenges associated with total hip arthroplasty in a patient with unique anatomy, including developmental dysplasia of the hip, pelvic dysmorphism, and unilateral sacroiliac joint autofusion. A 30-year-old female, with a history of developmental dysplasia of the hip treated with presumed pelvic osteotomy complicated by postoperative infection, presented with hip pain refractory to conservative management. Radiographic studies demonstrated a 10-cm leg length discrepancy, 20° of acetabular retroversion, severe hemipelvic dysmorphism, ipsilateral sacroiliac joint autofusion, and significant femoral head dysplasia. Total hip arthroplasty was performed using a revision acetabular component and modular femoral component, resulting in improvement in the postoperative leg length discrepancy. There were no neurovascular or other perioperative complications, and the patient was ambulating without pain or assistive devices at 1-year follow-up.

Effects of Total Hip Arthroplasty on Axial Alignment of the Lower Limb in Patients with Unilateral Developmental Hip Dysplasia (Crowe type IV)

BACKGROUND

The aim of this study was to evaluate the influence of total hip arthroplasty on axial alignment of the lower limb in adults with unilateral developmental hip dysplasia (Crowe type IV).

METHODS

We retrospectively reviewed medical records of 50 adults who underwent total hip arthroplasty, in which the acetabular cup was placed in the anatomical position. The following parameters were measured before surgery, immediately after surgery, and two years later: mechanical axis deviation (MAD), tibiofemoral angle (TFA), femoral offset, hip-knee-ankle angle (HKA), mechanical lateral distal femoral angle (LDFA), mechanical medial proximal tibial angle, height of medial femoral condyle, height of lateral femoral condyle, and leg lengthening. Length of the resected femoral segment was also recorded from medical records.

RESULTS

Preoperative MAD, TFA, HKA, and LDFA of the ipsilateral lower limb showed significant valgus deformity. MAD of the ipsilateral lower limb and valgus inclination were significantly smaller immediately after surgery than before, while TFA, HKA, femoral offset, and LDFA were significantly larger (P < 0.05). These parameters did not differ significantly between immediately after surgery and two years later (P > 0.05). Ipsilateral extremities were extended by a mean of 2.54 cm (range, 0 to 5.35 cm). The mean length of the femoral resected segment was 3.56 cm (range, 2.03 to 5.74 cm). The contralateral lower limb showed marginally smaller MAD and medial proximal tibial angle after surgery than before, but larger LDFA, TAF, and HKA.

CONCLUSIONS

In patients with developmental hip dysplasia who underwent total hip arthroplasty with placement of the acetabular component at the level of the anatomic hip center, axial alignment of the ipsilateral lower limb was immediately altered, and valgus inclination was significantly reduced. The procedure only slightly altered the axial alignment of the contralateral lower limb.

Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios

Medical three-dimensional (3D) printing has expanded dramatically over the past three decades with growth in both facility adoption and the variety of medical applications. Consideration for each step required to create accurate 3D printed models from medical imaging data impacts patient care and management. In this paper, a writing group representing the Radiological Society of North America Special Interest Group on 3D Printing (SIG) provides recommendations that have been vetted and voted on by the SIG active membership. This body of work includes appropriate clinical use of anatomic models 3D printed for diagnostic use in the care of patients with specific medical conditions. The recommendations provide guidance for approaches and tools in medical 3D printing, from image acquisition, segmentation of the desired anatomy intended for 3D printing, creation of a 3D-printable model, and post-processing of 3D printed anatomic models for patient care.

3D-printed model improves clinical assessment of surgeons on anatomy

Performing surgical procedures often requires a surgeon to develop a skill to create 3-dimensional (3D) mental model on patient's anatomy. Question remains whether the touching on the 3D printed model can facilitate learning of patient anatomy than viewing the rendered virtual on-screen model. The printed and the virtual 3D model were developed from CT films taken from a 4-year-old girl, who had dysplasia of the hip in the left hip. Eleven subjects were called to report measures on six key anatomical features on the hips. The reporting time and the accuracy were compared between the two models, along with the gaze characteristics of subjects while inspecting the models. The variables were analysed using a 2 × 2 within subject ANOVA to examine the difference between viewing the models (on-screen vs. printed-out) and the side of the hip (right vs. left). Interacting with the printed 3D model required shorter times and yielded more accurate visual judgments than viewing the virtual models on most of the anatomical features. Subjects performed a fewer number of fixations but with a longer mean fixation duration when interacting the printed than inspecting the virtual on-screen 3D model. Results confirmed the value of the printed 3D model on improving the clinical judgement on patient anatomy. Confidence in collecting information from the physical world and the cross-model sensor integration may explain why participants performed better with the printed model compared to the virtual model.

A simple technique to strengthen the initial and mid-term to long-term stability of the cup during total hip arthroplasty in developmental dysplasia of the hip

Objectives:

To assess the effects of a technique of cup blocking screws combined with impaction bone grafting during total hip arthroplasty (THA) for patients with developmental dysplasia of the hip (DDH).

Methods:

From August 2011 to July 2015, 53 patients (59 hips) with DDH in our hospital were treated with THA using the technique of cup blocking screws combined with impaction particulate bone grafting. These patients were prospectively followed, and the clinical and imaging results were collected.

Results:

Harris hip score (HHS) was raised from 41.24 before surgery to 91.49 at the latest follow-up (p<0.001). Length discrepancy (LLD) was reduced from 28.97 mm before surgery to 6.08 mm after surgery (p<0.001). No loosening of the cup was detected at the last follow-up. The differences were insignificant in cup inclination and rate of cup coverage among the 3 groups of Crowe type II, type III, and type IV DDH (p>0.05).

Conclusion:

The technique of cup blocking screws combined with impaction particulate bone grafting is simple and reliable, and it not only simplifies the attainment of initial stability, but also strengthens the mid-term to long-term stability during THA in DDH.

Effect of intermittent administration of teriparatide on the mechanical and histological changes in bone grafted with β-tricalcium phosphate using a rabbit bone defect model

Grafting β-tricalcium phosphate (TCP) is a well-established method for restoring bone defects; however, there is concern that the mechanical stability of the grafted β-TCP is not maintained during bone translation. Teriparatide has an anabolic effect, stimulating bone formation and increasing bone mineral density for the treatment of osteoporosis. The aim of the present study was to evaluate the effect of intermittent teriparatide treatment on changes in bone grafted with β-TCP using a rabbit bone defect model. Bone defects (5×15 mm) were created in the distal femoral condyle of Japanese white rabbits, and β-TCP granules of two different total porosities were manually grafted. Teriparatide (40 µg/kg) or 0.2% rabbit serum albumin solution as a vehicle control was subcutaneously injected three times per week following the surgery. At 4 or 8 weeks post-surgery, serum samples were obtained and the levels of γ-carboxylated osteocalcin (Gla-OC) were quantified using ELISA. Histomorphometry was also performed using sections of graft sites following staining for tartrate resistant acid phosphatase. Activity and mechanical strength (maximum shear strength, maximum shear stiffness and total energy absorption) were evaluated using an axial push-out load to failure test. Teriparatide treatment significantly increased (P<0.05) the serum levels of Gla-OC, a specific marker for bone formation, suggesting that teriparatide enhances bone formation in β-TCP-grafted rabbits. Furthermore teriparatide increased the degradation of β-TCP by bone remodeling (P<0.05) and promoted the formation of new bone following application of the graft compared with the control group (P<0.01). Furthermore, teriparatide suppressed the reduction in mechanical strength (P<0.05) during bone translation in bone defects grafted with β-TCP. The results of the present study demonstrate that teriparatide is effective in maintaining the mechanical stability of grafted β-TCP, possibly by promoting new bone formation.

Changes in Hip, Knee, and Ankle Coronal Alignments After Total Hip Arthroplasty With Transverse Femoral Shortening Osteotomy for Unilateral Crowe Type IV Developmental Dysplasia of the Hip

BACKGROUND

To investigate changes in lower extremity coronal alignment in patients with unilateral Crowe type IV developmental dysplasia of the hip who underwent total hip arthroplasty with transverse femoral shortening osteotomy.

METHODS

We reviewed the preoperative and 1-year postoperative full-length lower extremity radiographs of 25 patients. Femoral offset (FO), mechanical hip-knee-ankle angle, anatomical axis, mechanical axis deviation (MAD), mechanical lateral proximal femoral angle, anatomical medial proximal femoral angle, mechanical lateral distal femoral angle, anatomical lateral distal femoral angle, knee joint line congruency angle, mechanical medial proximal tibial angle, mechanical lateral distal tibial angle, ankle joint line orientation angle, tibial plafond talus angle, extremity length, and pelvic obliquity were measured on both the operative and nonoperative sides.

RESULTS

Postoperatively, there were significant changes in FO (P = .001), hip-knee-ankle angle (P = .004), MAD (P = .016), mechanical lateral proximal femoral angle (P = .001), anatomical medial proximal femoral angle (P = .012), mechanical lateral distal femoral angle (P = .043), and ankle joint line orientation angle (P = .012) on the operative side. Only MAD (P = .035) changed significantly on the nonoperative side.

CONCLUSION

Modification of FO and reconstruction of hip joint anatomy led to neutralization of knee and ankle valgus alignment. Effects on the nonoperative side were minimal.

Subtrochanteric femoral shortening osteotomy combined with cementless total hip replacement for Crowe type IV developmental dysplasia: a retrospective study

Background

Total hip replacement for high dislocation of the hip presents some difficulties, considering patients’ young ages, the abnormal hip anatomy and the high rate of complications. In this study, we present our experience in terms of clinical and radiological results in the treatment of Crowe type IV hips with subtrochanteric femoral shortening osteotomy and cementless total hip replacement.

Materials and Methods

We retrospectively reviewed 15 patients with Crowe type IV hip dysplasia (two bilateral cases for a total of 17 hips) treated with cementless total hip replacement associated with shortening subtrochanteric osteotomies (nine transversal and eight Z-shape osteotomies) between March 2000 to February 2006. The mean follow-up was 88 months (range 63–133). Harris hip score, leg length discrepancy, neurological status, union status of the osteotomy and the component stability were the criteria of the evaluation. All complications were noted.

Results

The mean HHS improved from 38.3 (range 32–52) to 85.6 (range 69–90). The mean preoperative leg length discrepancy was of 45 mm (range 38–70) and reduced to a mean of 12 mm (range 9–1.6) postoperatively. All osteotomies resulted healed at an average of 12.3 weeks (range 10–15). No cases of delayed union or nonunion were detected. Two patients (11%) showed early symptoms of sciatic nerve palsy which resolved uneventfully in 6 months. There was no migrations and none of the implants required revision.

Conclusions

Cementless THA with shortening subtrochanteric osteotomy is an effective method in the treatment of patients with Crowe type IV development dysplasia of the hip.

Level of evidence

IV.

The surgical treatment of spinal deformity in children with myelomeningocele: the role of personalized three-dimensional printed models

This study was carried out to evaluate the benefits of personalized three-dimensional printing as an aid to the performance of surgery for the correction of spinal deformity in children with myelomeningocele. We performed a retrospective review to include all such children for whom personalized three-dimensional spine models were used for surgical planning (group A) and compared them through subjective and objective criteria to a similar group that had no models (group B). The seven children in group A were younger and had more complex deformities than the 10 children in group B. The models provided a markedly improved appreciation of the complex anatomy and enabled the planning and performance of patient-specific spinal instrumentation that was secure and low profile. The efficiency of the surgery as measured by intraoperative fluoroscopy time and blood loss and the extent of the deformity correction was comparable or superior in group A.

Reconstruction of the Shallow Acetabulum With a Combination of Autologous Bulk and Impaction Bone Grafting Fixed by Cement

BACKGROUND

Acetabular bone deficiency, especially proximal and lateral deficiency, is a difficult technical problem during primary total hip arthroplasty (THA) in developmental dysplasia of the hip (DDH). We report a new reconstruction method using a medial-reduced cemented socket and additional bulk bone in conjunction with impaction morselized bone grafting (additional bulk bone grafting method).

QUESTIONS/PURPOSES

In a population of patients with acetabular dysplasia undergoing THA using a medial-reduced cemented socket and additional bulk bone with impacted morselized bone grafting, we evaluated (1) the radiographic appearance of bone graft; (2) the proportion of cups that developed loosening and subsequent revision; and (3) clinical results (outcome scores and complications).

METHODS

Forty percent of 330 THAs for DDH performed at one center between 1999 and 2009 were defined as shallow dysplastic hips. The additional bulk bone grafting method was performed on 102 THAs with shallow acetabulum (31% for DDH) at one center between 1999 and 2009. We used this approach and technique for shallow acetabuli when a cup protruded from the lateral acetabular edge in preoperative templating. The other 132 dysplastic hips without bone grafting had THA performed at the same periods and served as a control. Acetabuli were defined as shallow when the depth was less than or equal to one-fifth of the pelvic height (cranial-caudal length on radiograph). The additional bulk bone grafting technique was as follows: the resected femoral head was sectioned at 1 to 2 cm thickness, and a suitable size of the bulk bone graft was placed on the lateral iliac cortex and fixed by poly-L-lactate absorbable screws. Autologous impaction morselized bone grafting, with or without hydroxyapatite granules, was performed along with the implantation of a medial-reduced cemented socket. We defined an "incorporated" graft as remodeling and trabeculation including rounding off of the protruding edge of a graft beyond the socket. Radiographic criteria used for determining loosening were migration or a continuous radiolucent zone between the prosthesis/bone cement and host bone. Clinical outcomes were assessed using the Japanese Orthopaedic Association (JOA) and the Merle d'Aubigne and Postel score; complications were tallied from chart review. The followup was 10 ± 3 years (range, 6-15 years).

RESULTS

One acetabular component (1%) with severe shallow and steep acetabuli showed definite radiographic evidence of loosening and was revised. Clinically, the mean JOA score for the hips treated with additional bulk bone grafting THA in this study improved from 39 ± 10 points preoperatively to 95 ± 5 points postoperatively (p < 0.05, paired t-test). The mean Merle d'Aubigne and Postel score for the hips improved from 7 ± 2 points to 17 ± 1 points (p < 0.05, paired t-test). Complications included a Trendelenburg sign in one hip, dislocation in one, and transient partial sciatic nerve palsy in one. Within 3 years 6 months postoperatively, 101 of 102 additional bulk bone grafting cases showed successful bone remodeling and bone graft reorientation without collapse on radiographs. Partial resorption of the additional bone graft on the lateral side was observed in two hips (2%) with socket abduction angles of < 35°.

CONCLUSIONS

Achieving stable acetabular fixation is often challenging in the dysplastic hip, especially shallow acetabulum, and a variety of techniques have been described. Early results of combining bulk graft with impaction of morselized graft are promising. Although each surgical technique was well established, further investigation for clinical results of a combination of these techniques might be necessary to confirm longer term outcomes.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

How do different designs of femoral stem affect total hip arthroplasty applied to Crowe type III and type IV dysplastic hips

PURPOSE

A comparison was made of the clinical and radiological results of cylindrical fully porous-coated femoral stems (Group A) and Zweymüller-type femoral stems (Group B) used for the treatment of hip osteoathrosis, secondary to Crowe III and IV dysplasia, with total hip arthroplasty combined with femoral transverse shortening osteotomy.

METHOD

This study is a retrospective evaluation of 86 hips in 50 patients. Group A comprised of 43 hips and Group B comprised of 43 hips. During final follow-up evaluation, patients were clinically assessed with Harris Hip Score (HHS), Merle d'Aubigne-Postel scale (MAP), and SF-36 scale. For radiological examination the Gulman THA score was used. Femoral osteotomy union, osteolysis around the components and component migration were also recorded and evaluated.

RESULTS

In Group B, nonunion of the osteotomy site was found in 18.6% and delayed union in 20.9% of the hips. In Group A, delayed union was found in 7% of the hips. Patients' mean daily walking distance was found to be lower in Group A when compared to Group B. When the postoperative clinical HSS, and MAP and the radiological Gulman scores were compared, no statistically significant differences (p = 0.275) were found.

CONCLUSIONS

Patients with hip osteoarthritis secondary to Crowe III and IV dysplasia, who were treated with THA and transverse osteotomy showed a higher incidence of osteotomy complications when the Zweymüller femoral stem was used. However, these complications did not affect clinical outcomes.

Emerging Applications of Bedside 3D Printing in Plastic Surgery

Modern imaging techniques are an essential component of preoperative planning in plastic and reconstructive surgery. However, conventional modalities, including three-dimensional (3D) reconstructions, are limited by their representation on 2D workstations. 3D printing, also known as rapid prototyping or additive manufacturing, was once the province of industry to fabricate models from a computer-aided design (CAD) in a layer-by-layer manner. The early adopters in clinical practice have embraced the medical imaging-guided 3D-printed biomodels for their ability to provide tactile feedback and a superior appreciation of visuospatial relationship between anatomical structures. With increasing accessibility, investigators are able to convert standard imaging data into a CAD file using various 3D reconstruction softwares and ultimately fabricate 3D models using 3D printing techniques, such as stereolithography, multijet modeling, selective laser sintering, binder jet technique, and fused deposition modeling. However, many clinicians have questioned whether the cost-to-benefit ratio justifies its ongoing use. The cost and size of 3D printers have rapidly decreased over the past decade in parallel with the expiration of key 3D printing patents. Significant improvements in clinical imaging and user-friendly 3D software have permitted computer-aided 3D modeling of anatomical structures and implants without outsourcing in many cases. These developments offer immense potential for the application of 3D printing at the bedside for a variety of clinical applications. In this review, existing uses of 3D printing in plastic surgery practice spanning the spectrum from templates for facial transplantation surgery through to the formation of bespoke craniofacial implants to optimize post-operative esthetics are described. Furthermore, we discuss the potential of 3D printing to become an essential office-based tool in plastic surgery to assist in preoperative planning, developing intraoperative guidance tools, teaching patients and surgical trainees, and producing patient-specific prosthetics in everyday surgical practice.

Transverse Subtrochanteric Shortening Osteotomy During Cementless Total Hip Arthroplasty in Crowe Type-III or IV Developmental Dysplasia

The purpose of this study was to review the outcomes of transverse subtrochanteric shortening osteotomy during cementless total hip arthroplasty in Crowe Type-III or IV developmental dysplasia. Seventy-three osteotomies were included in our study. Mean follow-up was 61 months. Harris hip score, leg length discrepancy, neurological status, union status of the osteotomy, and femoral component stability were the criteria for evaluation. All complications were noted. The mean Harris hip score improved from 38.6 points to 83.7 points. The mean leg length discrepancy decreased from 56.5 mm to 10.7 at the latest follow-up. The mean union time was 5.2 months. We observed 4 non-unions. Transverse subtrochanteric shortening osteotomy is an effective and reliable method in restoration of a more normal limb.