Assessment of bifid and trifid mandibular canals using cone-beam computed tomography

Prevalence and topography of bifid and trifid mandibular canal in Turkish Western Anatolia Population: evaluation of the inferior alveolar canal with CBCT

PURPOSE

Various anatomical variations of the inferior alveolar canal increase the incidence of surgical complications; Therefore, this study aimed to evaluate the frequency and configuration of bifid and trifid mandibular canals using cone beam computed tomography (CBCT) in the Turkish subpopulation.

METHODS

The inferior alveolar canal was evaluated on 1014 hemi-mandibles in the CBCT (I-CAT 3D Imaging System) images of 513 patients. The frequency and configuration of the bifid and trifid mandibular canal (MC) were examined. The relationship between bifid MC configuration and dental status and age groups was analyzed. The distance of the accessory canal to the buccal and lingual walls and the alveolar crest was measured. The diameter of the main canal and accessory canal was measured and its relationship with dental status and age groups was evaluated.

RESULTS

Bifid MC was found in 266 hemi-mandibles (24.7%) and 212 (41.3%) of 513 patients. The most common type of bifid MC was the retromolar canal (87 sides), followed by the forward canal without confluence (41; 4%) and the dental canal (34; 3.4%). 10 of the dental canals were opening to the 1st molar, 14 of the 2nd molars, and 10 of the 3rd molars. The number of retromolar foramina was 1 on 56 sides, 2 on 15 sides, and 3 on 4 sides. Forward canal without confluence was more common in edentulous patients than in dentulous patients, while the dental canal was more common in dentulous patients. The main canal diameter was 3.53 ± 0.97 mm and the bifid MC diameter was 1.82 ± 0.70 mm. Distance of the bifid MC to the lingual wall was higher in the > 64 years group than in the 18-39 years group (p = 0.022). Distance of the bifid MC to the alveolar crest was lower in the > 64 years group compared to the 18-39 years group and 40-64 years group (p = 0.015). The main canal diameter was higher in the 40-64 years group than in the 18-39 years group (p = 0.012).

CONCLUSION

Bifid MC has a high prevalence, occurring in almost one in two patients. Dental and retromolar types, which are close to the teeth, are more common, and this increases the possibility of complications. CBCT is the most accurate imaging technique used to detect and define these variations.

Unique anomalous in the main mental foramen opening, mandibular canal pathway, and size and shape of genial tubercles: A case report

This clinical report presents a unique and previously unreported case of anatomical variations in the mandible, specifically involving the main mental foramen (MF), the mandibular canal (MC), and genial tubercles (GTs). The case involves a 21-year-old male seeking dental implant rehabilitation. The patient exhibited an unusual lingual exit path of the main left MF through the lingual cortical bone, with the MC following an anterior lingual direction along a lingual groove before exiting through the labial cortical bone between the apexes of the left canine and first premolar. Additionally, the patient displayed excessive enlargement and rare shape of the GTs. These rare anatomical findings presented challenges in dental implant planning. This case report emphasizes the importance of advanced imaging techniques like cone-beam computed tomography (CBCT) in evaluating mandibular structures for precise treatment planning and highlights the significance of understanding anatomical variations to prevent complications in dental procedures.

Bifurcation of the mandibular canal according to sex, age, and facial skeletal pattern: a morphological and morphometric study of cone beam computed tomography

PURPOSE

To assess the presence of mandibular canal bifurcation (BMC) and classify these variations by correlating findings with sex, age and facial skeletal pattern, measurements were made, including height, width, and distance from bifurcation to anatomical cortical bones.

METHODS

BMC was identified in cone beam CT exams of 301 patients and classified according to its origin, location, direction, configuration and ending. The height and width of the MC before and after the bifurcation; height and width of the BMC; and distance from BMC to alveolar (C1), buccal (C2), lingual (C3) and basal (C4) bone cortices were measured. All data were correlated with sex, age, and facial skeletal pattern (class I, II, III). The significance level was 5%.

RESULTS

67 BMC (22.26%) were identified in 55 patients (18.28%). Bifurcations were more prevalent in females (p = 0.57), aged 18-39 years (p = 0.40), class I (p = 0.77). Single bifurcations, located in the posterior region of the mandible, originating in the MC, with a superior direction and ending in the retromolar foramen were more prevalent (p > 0.05). Mean cortical measurements were higher in male individuals, with significant differences only at C1 (p = 0.03). The mean height and width of BMC were 2.24 (± 0.62) and 1.75 (± 0.45) mm. There was no association between BMC classification and the variables studied (p > 0.05).

CONCLUSION

Approximately 1/5 of the population studied had BMC. There were no associations of BMC presence or characteristics with sex, age, and facial skeletal pattern. The distance from bifurcation to alveolar (superior) cortical bone is greater in male individuals.

Identifying the Anatomical Variations of the Inferior Alveolar Nerve with Magnetic Resonance Imaging

BACKGROUND

The inferior alveolar nerve (IAN) is located in the mandibular canal (MC). It is critical to evaluate the position of the MC during treatment planning to prevent intra or postoperative complications.

AIMS

This retrospective study aimed to identify the anatomy and anatomical variations of the IAN using soft tissue imaging (pulse sequence magnetic resonance imaging [MRI]).

MATERIALS AND METHODS

This study was designed as a retrospective Consolidated Standards of Reporting Trials (CONSORT) study. In total, 220 MR images were obtained. Nutrient canals (NCs) were classified as intraosseous and dental NCs, while bifid MCs (BMCs) were classified as forward, retromolar, and buccolingual canals. IBM SPSS Statistics 22 was used. Kolmogorov-Smirnov and Shapiro-Wilk tests, descriptive statistical methods (means, standard deviations, and frequencies), and the Chi-square test were used. Statistical significance was set at P < 0.05.

RESULTS

In total, 220 patients (172 females and 48 males) were evaluated. NCs were present in 92.3% of all MCs and were significantly higher in patients aged <25 years. BMCs were observed in 106 patients (24.1%). The most common BMC of MC/IAN was in the forward canal (14.4%), followed by the retromolar canal (7.5%).

CONCLUSION

Although previously, the dental canal was considered as an anatomical variation, this study revisited the classification and suggested that dental canals are anatomical structures.

Bibliometric analysis and diagnostic efficacy of cone-beam computed tomography studies published in Imaging Science in Dentistry from 2011 to 2022

Purpose

This bibliometric analysis aimed to provide a comprehensive overview of the characteristics, trends, and level of diagnostic efficacy of studies on cone-beam computed tomography (CBCT) published in Imaging Science in Dentistry (ISD) from 2011 to 2022.

Materials and Methods

Publications related to CBCT identified in the electronic collection of ISD were selected according to eligibility criteria by 2 independent reviewers who collected data on the characteristics of the articles (year, authors, and country). The type and topic of studies were analyzed using VOSviewer v.1.6.18 (Centre for Science and Technology Studies, Leiden University, Leiden, Netherlands). The research articles were classified according to the hierarchical scale of diagnostic efficacy.

Results

Of the 236 articles included, most were from South Korea and Brazil. Bong-Hae Cho and Yun-Hoa Jung were the most prolific authors on the topic of CBCT. The most frequently published types of studies were cross-sectional and laboratory-based. The most popular topics WERE related to the diagnosis of pathologies and/or alterations, as well as anatomical variations. On the diagnostic efficacy scale, most studies were rated level 1 (technical efficacy) or 2 (diagnostic accuracy efficacy).

Conclusion

A steady increase was observed in publications related to CBCT, which are of both clinical and academic interest. The trends in these publications were analyzed, revealing that most are cross-sectional studies primarily exploring the capabilities of CBCT in diagnosing pathologies and/or changes in the oral and maxillofacial complex. These studies were typically classified as level 1 or 2 on the diagnostic efficacy scale.

Mandibular Canal Branching Assessed With Cone-Beam Computed Tomography

This study aimed to evaluate the prevalence and type of mandibular canal branching in a sample of the Iranian population through cone-beam computed tomography (CBCT) images. This cross-sectional study was performed on CBCT records of 300 patients (112 males and 188 females; mean age 30.14 ± 10.96 y). The presence of mandibular canal branch (MCB) was evaluated by reconstructing multiple panoramic views and buccolingual cross-sections, according to Naitoh's classification. The prevalence of MCB, the type of MCB, and the demographic information of all patients were recorded. The maximum number of branching and the maximum type of branching were also registered for each patient. Mandibular canal branching was observed in 131(43.7%) of 300 CBCT images without side or sex differences ( P > 0.05). The most frequent type was dental, followed by the retromolar, forward, and buccolingual types, respectively. There was a statistically higher frequency of retromolar canal in females than in males (odds ratio: 1.14 ± 4.25; P = 0.013). About 46% of patients with MCB had more than one accessory canal and 29% displayed more than one type of MCB. The coincidence of dental and retromolar canals in a patient was the most prevalent combination. Considering the relatively high prevalence of MCB (43.7%), it is recommended to keep in mind the possibility of anatomical variations of the inferior alveolar nerve during dental procedures to avoid postsurgical complications. The high possibility of observing multiple numbers and types of branching in the patients should also be considered during preoperative assessments.

Prevalence of bifid variations of the mandibular canal in an Iranian population using cone-beam computed tomography

OBJECTIVES

Bifid mandibular canal (MC) is an anatomical variation of the MC. This study aimed to assess the prevalence and shape of bifid MC in an Iranian population.

MATERIALS AND METHODS

A total of 681 patients who had undergone cone-beam computed tomography (CBCT) for different purposes between 2018 and 2020 were evaluated. After detection, bifid MCs were classified into four types forward, buccolingual, dental, and retromolar. CBCT images were assessed by two oral and maxillofacial radiologists. Data were analyzed by SPSS using an independent t-test and Chi-square test.

RESULTS

Bifid MC was found in 23 (3.4%) out of 681 patients, with a mean age of 32.21 years. Ten patients (1.5%) had a bifid MC on the right side, 6 (0.9%) on the left side, and 7 (1%) bilaterally. However, no significant correlation was found between laterality and the prevalence of bifid MC (P > 0.05). Bifid MC was found in 8 males (34.8%) and 15 females (65.2%). Gender had no significant correlation with the prevalence of bifid MC (P > 0.05). Forward type was the most common (n = 8, 1.2%) followed by buccolingual (n = 5, 0.73%), dental (n = 2, 0.3%), and retromolar (n = 1, 0.14%) types.

CONCLUSION

According to the present results, bifid MC was not uncommon in the Iranian population of the present study, and forward type was the most common, followed by buccal and then dental bifid MCs. There was no significant correlation between sex and age with bifid MC but bifid MC was detected more frequently in females than males, and it was seen unilaterally in a higher percentage of the cases.

Bilateral Inferior Alveolar Canal Variations Detected by Cone Beam Computed Tomography-Case Report

Inferior alveolar canal (IAC) is an important anatomical landmark in dentistry. It is a bony canal in the mandible, one on each side and transmit inferior alveolar neurovascular bundle. However, it has been reported to have anatomical variations in its course. IAC is visible on radiographs and cone beam computed tomography (CBCT) has been identified as the one of the best methods to assess IAC preoperatively. An interesting case of IAC anatomy in a CBCT is presented here. There were accessory mandibular foramina, retromolar foramina on both sides, accessory mental foramen on the right side and lingual foramina in the midline as well as on the body of the mandible. The IAC was showing several branching within ramus as well as in the body of the mandible. This case report highlights the possible anatomical variations and importance of careful assessment of IAC in dental and maxillofacial procedures which can cause damage to the neurovascular bundle.

Characterization of a retromolar foramen in a Chinese population: A radiographic study

BACKGROUND

Retromolar canal (RMC) arises from the mandibular canal (MC) behind the second or third molar and travels anterosuperiorly to a retromolar foramen (RMF). RMCs and RMFs have generally been ignored in anatomical textbooks and have rarely been reviewed or studied in the anatomical and dental literature until the last decades.

OBJECTIVE

This study aimed to characterize RMF in a Chinese population concerning its incidence, origin, and classification via anatomical study and periapical radiography.

METHODS

123 dry adult Chinese mandibles were collected to observe the incidence of RMFs. RMFs were determined using a steel wire 0.5 mm in diameter. The passways or origins of the retromolar canal (RMC) were determined and classified via periapical radiography. For each RMF, two dentists independently measured the diameter and its distances to the lingual cortex, the buccal cortex, and the distal edge of the last tooth (or the alveolar fossa) using a vernier caliper.

RESULTS

The incidence of RMFs was 31.71%. The average RMF diameter was 0.78 ± 0.27 mm. From RMF, the distance was 4.27 ± 1.87 mm to the lingual cortex, 8.61 ± 2.23 mm to the buccal cortex, and 7.84 ± 3.87 mm to the distal edge of the last tooth (or the alveolar fossa). RMCs were classified into MC type originating from the mandibular canal and AF type originating from the alveolar fossa. The diameters of MC ones were more significant than those of AF ones. There was no apparent correlation between the existence of the third molar and the presence of an RMF.

CONCLUSION

The incidence of RMFs in Chinese may be about one-third, which is a potential factor in the onset of surgery accidents. RMCs can be classified into two types by their origins. One of them is MC, which originates from the mandibular canal, and the other is AF, which originates from the alveolar fossa.

An evaluation of mandibular canal variations: a systematic review and meta-analysis

The inferior alveolar nerve and vessels are carried via the mandibular canal, which extends bilaterally from the inferior alveolar foramen to the mental foramen. Bifid and trifid mandibular canals result from abnormal fusions of nerve canals. The purpose of this study was to provide an up-to-date and comprehensive analysis of the prevalence of mandibular canal variations among healthy adults, and to identify any potential ethnic, sex, or laterality predilections. The prevalence of the bifid mandibular canal was 18.87% and that of the trifid canal 1.3%. Unilateral variants were three times commoner than bilateral. Each mandibular half had four canals emanating from separate openings on the lingual surface of the mandibular ramus. Retromolar and forward canals were the predominant subtypes, followed by dental; buccolingual were the least frequent. The mean length and diameter of the bifid mandibular canal were 13.62 mm and 1.63 mm, respectively. The possibility of a bifid mandibular canal is a crucial consideration in dental medicine. Because anatomical variations of the mandibular canal are fairly common, awareness of them is essential for anatomy teachers and for surgeons who operate in the oromaxillofacial region.

Bifid Mandibular Canal: A Proportional Meta-Analysis of Computed Tomography Studies

Introduction

Growing body of evidences showed different grades in prevalence of bifid mandibular canals. Because the previous reviews focused solely on patient-level occurrence, hemi-mandible-level prevalence, bilateral symmetry, length, and diameter of bifid mandibular canals were required to be estimated collectively. The research question of this meta-analysis was "What is the prevalence of bifid mandibular canal among patients seeking computed tomography examinations"?

Materials and Methods

In vivo, computed tomography, and cross-sectional studies were eligible. Studies, with less than 100 subjects or anatomic site restriction or controlled class of bifid mandibular canal, were excluded. Joanna Briggs Institute (JBI) critical appraisal tool for prevalence studies was used to assess methodological quality of all included studies. Random effect meta-analyses for proportion of bifid mandibular canal were done.

Results

40 studies met the inclusion criteria. All studies were selected for both systematic review and meta-analyses. Totally, 17714 patients and 31973 hemi-mandibles were included. All eligible studies showed moderate risk of bias on average. Resulting from the random effect model, more than 20% of patients seeking computed tomographic examinations had bifid mandibular canals (BMCs) which penetrated into slightly more than 14% of hemi-mandibles. Of the patients having bifid mandibular canals (BMCs), nearly 23% exhibited such anatomy on both sides of their mandibles. Estimated mean length and diameter of the accessory canals of bifid mandibular canals were 12.17 mm and 1.54 mm, respectively.

Conclusion

The geographical locations, classifications, reliability test, and voxel size of computed tomography were all implicated in the prevalence of bifid mandibular canals along with gender and laterality, although considerable heterogeneity and bias were detected.

Prevalence of Bifid Mandibular Canal: A Systematic Review and Meta-analysis

Objectives

The aim of this study was to evaluate the prevalence of bifid mandibular canal (BMC) using cone-beam computed tomography (CBCT) and panoramic images through meta-analysis.

Methods

Databases of Scopus, PubMed, and Web of Science were searched to find the relevant studies. Studies the met the inclusion criteria were selected. Variables of prevalence, side, length and diameter of BMC and sex were assessed. Data was analyzed using STATA software version 17.

Results

Of the 1164 articles initially selected, 36 were enrolled. A total of 38077 patients were considered. The overall prevalence of BMC was 18.0%. Studies that evaluated CBCT images reported higher prevalence of BMC compared to panoramic images (25.0% vs 3.0%). The prevalence of BMC was higher in men than women and slightly higher in right side than the left side of the jaw, but none of those differences were significant.

Conclusion

The results have shown a total prevalence of 18.0% for BMC. Detection power of CBCT images were higher than panoramics. There was no significant relation between prevalence of BMC with sex or side of the jaw.

Variation of Mandibular Canal Branching Related to Anatomical Regions in Mandible: A Radiographic Study Without Contrast

PURPOSE

Screening mandibular canal branches and awareness of these possible canal branches is vital for patient safety and surgical success. The aim of this study was to evaluate the prevalence and localization of mandibular canal branching (MCB).

METHODS

This is an institutional and retrospective cohort study of patients who presented for evaluation of cone beam computed tomography (CBCT) between 2019 and 2020. The prevalence of MCB and the related foramina was estimated according to anatomical regions. Predictor variables were gender, age, anatomical region, and side of branches. Outcome variable of the study was MCB. Thus, multiple correspondence analysis was performed to determine the relationships between the categories of the variables, as well as between variables.

RESULTS

CBCT images were obtained from 180 patients (n = 360 hemimandible; 90 males, 90 females). MCB was observed in 130 (72.2%) of 180 patients (mean age = 38.2 ± 11.8 years). MCB was observed in 63 (48.5%) males and 67 (51.5%) females, and the prevalence of MCB did not differ significantly according to gender (P = .618). MCB was mostly observed in the molar region (69 branches, 34.3%). Foramina were detected in 60 of 248 branches (24.19%) and were mostly observed in the retromolar region (28 foramina, 46.7%). "Quadrafid" branching was detected in 2 females (1.11%). Female patients aged 19-38 years were more prone to have MCB in molar and retromolar regions. MCB was more likely to occur bilaterally. There was also a high positive correlation among the MCB, side, and anatomical regions.

CONCLUSIONS

MCB is not a rare anatomical variation, and even quadrafid branching can be observed in the hemimandible. CBCT images should be examined carefully for possible MCB to minimize postoperative complications during dental surgery.

Prevalence and Characterization of bifid mandibular Canal Using Cone Beam Computed Tomography: A Retrospective Cross-Sectional Study in Saudi Arabia

Aim

The purpose of this study is to determine the prevalence and morphological characteristics of the bifid mandibular canal in a Saudi Arabian subpopulation, to aid in preventing surgical complications near the mandibular canal.

Patients and Methods

Using CBCT images obtained from the Radiology unit database in a University Hospital Clinics. A total of 488 CBCT images were investigated (244 Female – 178 Male). In the present study, the Naitoh classification was used to categorize the bifid mandibular canal into the following types: 1) Retromolar canal; 2) Dental canal; 3) Forward canal (with or without confluence); and 4) Buccolingual canal. Additional variation (Trifid canal) was included. All CBCTs were assessed in coronal, sagittal, axial, as well as panoramic views using specialized software.

Results

The prevalence of BMC was 28.7% (95% CI, 24.5 to 33.2), Gender (p = 0.404) and age (p = 0.654) had no statistical significances, laterality of BMC, patients with unilateral BMC were significantly older than those with bilateral BMC (mean ± SD ages of 40.5 ± 13.5 and 32.9 ± 13.8, respectively, p = 0.009). About two-thirds (67.5%) of the investigated BMC cases were found unilateral. The most common reported type of BMC was retromolar canal.

Conclusion

The incidence of bifid mandibular canal using CBCT is considered relatively high in Saudi Arabian subpopulation, with the most common type was the retro-molar canal.

Prevalence and Characteristics of Accessory Mandibular Canals: A Cone-Beam Computed Tomography Study in a European Adult Population

The purpose of this observational study is to evaluate the prevalence and main characteristics of bifid canals within a European adult population, analyzing cone-beam-computed tomography (CBCT). The population study examined 300 subjects. The CBCTs were performed between 2012 and 2019, using PaX-Zenith3D with a standard protocol of acquisition. The parameters analyzed were the presence and lengths of the bifid mandibular canals. The sample included 49% male and 51% female participants. The mean age of the patients was 47.07 ± 17.7 years. Anatomical variants of the mandibular canal were identified in 28.8% of the sides and 50.3% of the patients. In 7.3% of the subjects, the anatomical variants were present bilaterally. The most frequently encountered bifid canal was Type 3 (40.5%), followed by the Type 1 canal (39.3%), the Type 2 canal (14.5%), and the Type 4 canal (5.9%), 40% on the right side and 60% on the left side. The average length of the bifid canals located on the right side of the mandible was 11.96 ± 5.57 mm, compared to 11.38 ± 4.89 mm for those measured on the left side. The bifid mandibular canal is a common anatomical variation of the mandibular canal. It is fundamental to performing an accurate preoperative evaluation using CBCT analysis to avoid and/or reduce intraoperative and postoperative complications.

Inferior alveolar nerve topography and its bifurcation features: a cone beam computed tomography evaluation

BACKGROUND

Mandibular canal (MC) is the most important vital structure in mandible to prevent from complications such as bleeding and paresthesia. The aims of the present study were to inform the features (diameter, distances to the mandibular borders, and distance to tooth apex) of the MC for each posterior tooth region, and to present the bifurcation features of the MC.

METHODS

Four-hundreds-eighteen MC images of 209 patients were evaluated. The parameters were recorded from right and left hemi-mandibles for each posterior teeth region: 1) MC diameter; 2) MC and mandibular basis distance; 3) MC and crest distance; 4) MC and tooth apex distance; 5) MC and buccal plate distance; 6) MC and lingual plate distance; and 7) possible implant length (the distance between 2 mm coronal of the MC and 1 mm apical of the crest). Additionally, MC bifurcation type and bifid mandibular canal length were noted for right and left sides.

RESULTS

While higher MC diameter values were recorded at molars, MC diameter in first premolars bilaterally were the lowest. In premolars, MC and mandibular basis distance showed higher values than molars. There was a trend of decrease in MC and crest distance from molars to premolars. The highest MC and tooth apex distance was measured in second molar; however, the lowest was in the first premolar. Additionally, MC and buccal plate distances were higher in molars, while MC and lingual plate distances were higher in premolars. Possible implant length in first premolar was the lowest, when it was the highest in second molars.

CONCLUSIONS

For simulating overall MC topography, it extended bucco-coronally from molars to premolars. Due to this topography, possible implant length increased from premolars to molars.

Normal Variants of the Oral and Maxillofacial Region: Mimics and Pitfalls

A normal variant is defined as an incidental, often asymptomatic, imaging finding that mimics a true pathologic condition. Given the complex anatomy and wide variety of normal variants in the oral and maxillofacial region, a thorough understanding of commonly encountered normal variants in this region is essential to avoid misinterpretation and unnecessary further imaging or interventions. Moreover, familiarity with normal variants that are known to become symptomatic at times is necessary to facilitate further workup and guide the treatment plan. Intraoral radiography and panoramic radiography, which are unique to oral and maxillofacial radiology, provide two-dimensional (2D) images. Hence, the overlapping of structures or the displacement of the tomographic layer on images can confuse radiologists. It is crucial to understand the principle of 2D imaging to avoid being confused by ghost images or optical illusions. In addition, understanding the normal development of the maxillofacial region is essential when interpreting maxillofacial images in children or young adults because the anatomy may be quite different from that of mature adults. Knowledge of changes in the jaw bone marrow and each tissue's growth rate is essential. It is also necessary to know when the tooth germ begins to calcify and the tooth erupts for diagnostic imaging of the maxillofacial region. The authors describe imaging findings and clinical manifestations of common normal variants in the oral and maxillofacial region, divided into four parts: the maxilla, mandible, tooth, and temporomandibular joint, and discuss the imaging approach used to differentiate normal variants from true pathologic conditions. Online supplemental material is available for this article. ^©RSNA, 2022.

[Evaluation of the morphology of the nasopalatine canal using cone beam computed tomography]

OBJECTIVE

High precise evaluation of the nasopalatine canal morphology is essential to perform detailed diagnosis and treatment plans in implantology and the orthodontic field. We aimed to study morphometric analysis measurements of the nasopalatine canal.

MATERIAL AND METHODS

In this cross-sectional study, maxillary CBCT images from 125 patients were evaluated in the Maxillofacial Radiology department between 2014-2021. Sagittal views were assessed to determine nasopalatine canal morphology and dimensions. The difference in canal diameter and length between genders was evaluated using an One Way ANOVA test.

RESULTS

There was no significant sex difference among all 125 cases in nasopalatine canal diameter, length, anterior bone plate width. The average length of the nasopalatine canal was 16.49±2.8 mm in male, 16.20±2.9 mm in female, incisive foramen diameter in the sagittal plane was 4.04±0.9 mm in male, 4.02±0.9 mm in female, nasopalatine foramen diameter was 4.63±1.4 mm in male, 4.75±1.2 mm in female. The width of the bone anterior to the canal was 5.89±1.4 mm in males, 5.69±1 mm in females.

CONCLUSION

16-48 aged Mongolian average length of the nasopalatine canal was 16.3 mm, and average incisive foramen width was 4.08 mm, the average width of the bone anterior to the canal was 5.76 mm. Anterior retraction treatment for upper incisor root can be done safely without root resorption around 5.5 mm in the premaxillary alveolar bone.

What are the retromolar and bifid/trifid mandibular canals as seen on cone-beam computed tomography? Revisiting classic gross anatomy of the inferior alveolar nerve and correcting terminology

PURPOSE

Since cone-beam computed tomography was developed, a number of radiological studies on the bifid mandibular canals (BMCs) and trifid mandibular canals (TMCs) have been reported. However, many of the suggested subtypes of the BMC described in the literature seem to be normal branches of the inferior alveolar nerve. This might be due to a lack of revisiting classic anatomical studies in the field of radiology. Therefore, such studies are revisited here.

METHODS

A database search using PubMed and Google Scholar was conducted on BMC and TMC. Eighty-nine articles underwent full-text assessment. The reported three classifications of BMC and the six modified classifications were reviewed and compared to the intramandibular inferior alveolar nerve branches.

RESULTS

Some subtypes of BMC and TMC simply represent normal inferior alveolar nerve branches, i.e., retromolar branch, molar branch (alveolar branch/dental branch), large mental branch, or communicating branch. Others such as Naitoh's type III BMC and forward canal might be a true BMC.

CONCLUSION

We found that the bifid mandibular canal is an additional intramandibular canal running parallel to the mandibular canal with/without confluence with the main canal through comparison of classifications of BMC/TMC between the radiology and anatomy fields.

Anatomical Variations of the Bifid Mandibular Canal on Panoramic Radiographs in Citizens from Zagreb, Croatia

Background

The bifid mandibular canal (BMC) is an anatomical variation with reported prevalence ranging from 0.08 to 65%. Identifying anatomical variations of mandibular canal is very important in order to prevent possible complications during oral surgical and other dental procedures.

Objectives

The aim of this study was to determine the prevalence and to classify the morphology of BMCs using digital panoramic radiographs.

Material and methods

A retrospective study was conducted that included 1008 digital panoramic radiographs (412 female and 596 male) used to identify the type of BMC. Panoramic radiographs were analyzed by three oral surgeons and one dentist, and BMCs were classified into six different types, 4 types according to Langlais et al. (types 1-4), and two new types (types 5 and 6) described by authors.

Results

The prevalence of BMC was 4.66% (n=47), with no significant differences in gender between BMC types (P=0.947; χ²=0.74). The prevalence of type 1 BMC was 0.79% (n=8), type 2 2.08% (n=21), type 3 0.30% (n=3), type 4 0% (n=0), type 5 0.89% (n=9) and type 6 0.60% (n=6).

Conclusion

This study revealed a relatively high prevalence of BMCs among Zagreb citizens. Furthermore, two new types of BMCs were described. These results stress the importance of a careful and thorough radiographic analysis prior to each invasive procedure in the mandible.

Prevalence of bifid and trifid mandibular canals with unusual patterns of nerve branching using cone beam computed tomography

Lack of knowledge concerning the inferior alveolar canal anatomical variations had proven to increase the incidence of surgical complications, so the study aimed to assess the configuration and prevalence of bifid and trifid mandibular canals using cone beam CT in Egyptian subpopulation. Cone beam CT scans of 278 patients (530 hemi-mandibles) were included in the study, in which bifid and trifid mandibular canals or any other branching patterns were recorded and evaluated. Bifid canals were categorized following Naitoh classification, and the diameter of the main mandibular and accessory canals was measured. Bifid canals were detected in 181 canals (34%) while trifid canals in 46 canals (8.7%). Upon classifying the bifid canals, 78 canals showed forward type, 40 retromolar type, 33 dental type, and 7 canals showed buccolingual type. Two special bifid canals subtypes were reported in 23 canals and nine distinct patterns of trifid canals were reported in our study. In addition, unusual patterns of canal branching were reported in 5 cases. The mean diameter of the accessory canals was 1.18 ± .54 mm and the main canal was 3.98 ± 1.31 mm. This study reported a high prevalence (54%) of canal branching, which reinforces the importance of cone beam CT in pre-surgical planning.

Assessment of the Retromolar Canal in Taiwan Subpopulation: A Cross-Sectional Cone-Beam Computed Tomography Study in a Medical Center

The retromolar canal is an anatomical variation that occurs in the mandibular bone. The retromolar canal typically originates in the mandibular canal on the distal side of the third molar and extends forward and upward to the retromolar foramen (RMF), which contains the neurovascular bundle. Accidentally damaging the neurovascular bundle in the retromolar canal during the extraction of the third molar, dental implant surgery, or maxillofacial orthognathic surgery may lead to subsequent complications such as incomplete local anesthesia, paresthesia, and bleeding during operation. The objective of this study was to investigate the prevalence of the RMF in the Taiwanese population in a medical center by using dental cone-beam computed tomography (CBCT) and to identify the position of the RMF in the mandibular bone. The dental CBCT images for the mandibular bone of 68 hemi-mandible were uploaded to the medical imaging software Mimics 15.1 to determine the prevalence of the RMF in the Taiwanese population and the three positional parameters of the RMF in the mandibular bone: (1) The diameter of the RMF, (2) the horizontal distance from the midpoint of the RMF to the distal cementoenamel junction of the second molar, and (3) the vertical distance from the midpoint of the RMF to the upper border of the mandibular canal. Seven RMFs were observed in the 68 hemi-mandibles. Thus, the RMF prevalence was 10.3%. In addition, the diameter of the RMF was 1.41 ± 0.30 mm (mean ± standard deviation), the horizontal distance from the midpoint of the RMF to the distal cementoenamel junction of the the second molar was 12.93 ± 2.87 mm, and the vertical distance from the midpoint of the RMF to the upper border of the mandibular canal below second molar was 13.62 ± 1.3487 mm. This study determined the prevalence of the RMF in the Taiwanese population in a medical center and its relative position in the mandibular bone. This information can provide clinicians with a reference for posterior mandible anesthesia and surgery to ensure medical safety.

Anatomical variations of the mandibular canal and their clinical implications in dental practice: a literature review

INTRODUCTION

The anatomical variations of the mandibular canal have been described according to the number of additional branches it presents, bifid and trifid. Within the bifids we can also find subtypes of variations such as the retromolar mandibular canal. These anatomical variations can have important clinical implications for the work of dental professionals.

METHODS

A systematic search of the literature was carried out in different databases that met the following criteria: articles published between 2000 and 2020, and articles that established a clinical correlation with variations in the mandibular canal.

RESULTS

After applying inclusion and exclusion criteria, 32 articles were obtained, in which the variations of the mandibular canal were identified, their prevalence and incidence, which was very varied between the different articles, it was also found that the CBCT was the main technique to identify the anatomical variations of the mandibular canal. Lastly, the anatomical variations of the mandibular canal have a direct clinical correlation with pre-surgical, intra-surgical and postsurgical complications in pathologies that require surgical intervention.

CONCLUSIONS

The anatomical variations of the mandibular canal have a high incidence, so knowing them is of vital importance both for clinicians and anatomy professors who provide morphological training. We believe that research should focus on describing and diagnosing the causes of these anatomical variations. That said, there is also a continuous challenge for all health professionals to learn about the different anatomical variations that the human body presents and how these can affect clinical practice.

A rare case of trifid mandibular canal with bilateral retromolar foramina

There are many reported anatomical variations of the mandibular canal. Consequently, there is great variation in the retromolar area, such as the quantity, size, and location of the retromolar foramen (RMF), the bony entrance of the retromolar canal (RMC). These variations allow for different accessory innervations to the mandibular molars and their adjacent buccal tissue because the RMC contains neurovascular bundles. Consideration of these anatomical variations is crucial for avoiding complications in anesthesia, implant placement, and surgery. However, the rarer canal types are often only imaged by computed tomography (CT) or cone beam computed tomography (CBCT). We present a rare case with bilateral RMF and a unilateral trifid mandibular canal in a cadaver.

Evaluation of Mandibular Third Molar Region in a Turkish Population Using Cone-Beam Computed Tomography

OBJECTIVES

To evaluate impacted mandibular third molar tooth region and obtain linear measurements using CBCT images and to assess the relationship between the impacted third molar and the mandibular canal.

METHODS

CBCT scans of 351 patients (208 females, 143 males) were assessed. Age, gender, and impaction site were recorded for each patient. The relationship of third molars with the vertical axis of second molars, 2nd molar resorption and the relationship between third molar apices and the mandibular canal were assessed. In addition, the distance between ramus and second molar, mesiodistal width of the third molar, the angle between third molar and second molar, and width of the third molar capsule were measured. Binary Logistic Regression, Chi-Square Test, and General Linear Model were used for statistical analysis.

RESULTS

The highest percentage of impaction was found for mesioangular followed by transversal and vertical. The transversal impacted third molars revealed a significant association with adjacent second molar root resorption (p<0.001). There was a statistical significance between the second molar resorption and distance between ramus and second molar (p<0.001). The mesioangular impacted third molars revealed significant relation with the mandibular canal (p<0.05). The most frequent variation found was the dental canal followed by the retromolar canal. In general, higher measurement values were obtained for men when compared to women (p<0.05).

CONCLUSION

CBCT assessment of the third molar region provided useful information regarding impacted mandibular third molar surgery operations.

Value of Performing Routine Vascular Mapping Synchronous with Radiographic Assessment of Endodontic Lesions: Case Series

With the adoption of limited-volume cone beam computed tomographic (CBCT) imaging in dentistry, high resolution of the maxillomandibular complex has led to the recognition of numerous accessory neurovascular canals. The preoperative identification of these structures is essential to facilitate the safe performance of an assortment of invasive dental procedures; however, there is limited information in the endodontic literature regarding mapping of these neurovascular canals and their anatomic variants. To emphasize the utility of accessory neurovascular channel mapping in conjunction with endodontic therapy, we have presented the clinical findings of 4 diverse cases. Comprehensive evaluation of the CBCT scans showed relevant underlying etiopathologies, prompting clinical modifications that led to enhanced patient outcomes.

Assessment of the configuration of the mandibular canal using cone beam computed tomography

BACKGROUND

During dental implants placement and bone augmentation procedures, it is important to determine the presence and location of mandibular canal anatomical variation in order to avoid injuries to inferior alveolar bundle. This study aimed to describe the prevalence and configuration of mandibular canal branching in the posterior region of the mandible using cone beam computed tomography (CBCT).

METHODS

The interpretation of the images was conducted according to the presence, classification and location of the mandibular canal. Horizontal and vertical distances from mandibular canal in the ramus region to the molar region was recorded. CBCT images of 751 patients, 486 women (64.7%) and 265 men (35.3%), with a mean age of 54.57 (±13.23; 14-93) years, were interpreted by one calibrated examiner.

RESULTS

Out of 1502 hemi-mandibles images, mandibular canal variations were observed in 130 (8.6%). Sixty-four (49.2%) mandibular canal variations were identified on the right side and 66 (50.8%) on the left side. The mean distances between superior cortical of the mandibular canal and the base of mandible, buccal cortical of mandibular canal and buccal cortical bone, and superior cortical of mandibular canal and alveolar ridge were 12.16 mm (±2.68), 4.17 mm (±1.30), and 12.97mm (±4.01), respectively. Type I mandibular canal variation was the most frequent (68; 52.2%), followed by type III (34; 26.1%).

CONCLUSIONS

Prevalence of mandibular canal variations was 8.6%, type I was the most common and its direction showed proximity with lingual surface in the second molar region.

Incidence of retromolar canal in Egyptian population using CBCT: a retrospective study

Background

Many studies have been done to investigate the incidence and the course of the retromolar canal (RMC) in different populations either osseous studies using cadavers or dry mandibles, panoramic studies, or cone beam computed tomography (CBCT) studies. The location of the RMC is in the retromolar area distal to the third mandibular molar. The retromolar area is considered an imperative site where many dental surgeries are being held.

The aim of this study is to determine the incidence of RMC in the Egyptian population using CBCT and measure the distance between the RMF and neighboring anatomical landmarks to better allocate the RMC and RMF and avoid the complications.

Two hundred and fourteen CBCT scans were examined to detect the presence of RMC. Their course was classified to 3 main types A, B, and C, and linear measurements were done from the retromolar foramen (RMF) to the 2nd and 3rd molars in anteroposterior direction and from the RMF to the mandibular foramen (MF) in anteroposterior and mediolateral directions.

Results

The RMC was present in 24 scans from the 214 with 11.2% incidence rate. The most common type was found to be type A, and type C was the rarest. The RMC has no significant difference between males and females, unilateral and bilateral distribution, and right and left sides. The linear measurements from the RMF to the 2nd and 3rd molars are 14.70 ± 5.07 mm and 4.26 ± 4.21 mm, respectively, and from the RMF to the MF in anteroposterior and mediolateral directions are 15.69 ± 3.43 mm and 2.62 ± 1.60 mm, respectively.

Conclusions

The incidence rate of RMC in Egyptian population represents 11.2%. The use of CBCT is quite important in the evaluation of the retromolar area to visualize the presence of the RMC or RMF and avoid the complications occurring due to different dental surgical procedures performed in the aforementioned site.

Incidence and Anatomical Properties of Retromolar Canal in an Iranian Population: A Cone-Beam Computed Tomography Study

Objectives

Retromolar canal (RC) is an anatomic structure, and due to increasing demand for surgical procedure in the retromolar area of the mandible, the identification of the retromolar canal has become an issue of clinical concern. It can innervate the third molar and some of the muscles around the posterior segment of the mandible, complicating surgical procedures in the retromolar area and root canal treatment of third molars. The aim of this study was to evaluate the incidence and anatomical properties of RC in a western Iranian population using cone-beam computed tomography (CBCT) images. Materials and Methods. Two hundred bilateral CBCT images were collected and screened in the three spatial planes for the presence of an RC. Anatomical properties and location of the RCs were assessed according to their course and distance from the surrounding structures. The relationship between the presence of RC and age, sex, side, and presence of second and third molars was also evaluated. Independent samples t-test, ANOVA, Tukey's post hoc test, paired t-test, ANOVA, Tukey's post hoc test, paired

Results

At least one RC was observed in 22% of the mandibles. Its bilateral incidence was 5.5%. Two major types of canals were detected, namely, type I, following a straight or curved course from the mandibular canal (MC) to the retromolar area (47.3%), and type II, coursing from the retromolar area to the radicular part of the third molar (52.7%). Regarding linear measurements, the mean RC diameter and the mean distance to the MC, second, and third molars were 0.68 ± 0.31, 13.7 ± 2.8, 15.3 ± 3.0, and 7.3 ± 2.3 mm, respectively.

Conclusion

Based on the results of this study, RC was found in 22% of the cases; thus, it should be considered as a normal anatomical variation in the Iranian population rather than a rare finding.

Observation of double mandibular canals and types of bifid canals in dry skulls

Background/Aim: The aim of the present study was to assess prevalence and morphologic mandibular canal variations in dry skulls. Material and Methods: Panoramic radiographs were obtained of 57 skulls among the academic collection at the University of Pittsburgh. Orthodontic wire was inserted through the mandibular canal as a reference point at panoramic images for localization of the course of the mandibular canal. Results: Double mandibular canals were present in 2 out of 57 skulls (3,5%); one of them was unilateral the other one was bilateral. Additionally, bifurcation of the mandibular canal and different types of configurations were assessed. In five of the specimens (8,8%) bifid canals were identified. Among them, one case (1,7%) was identified as a forward type. In one case additional canal (1,7%), was detected in the retromolar region, which joined the main canal. Three of the specimens (5,3%) showed accessory canal types. These were the canals that detached from the main canal and proceeded towards the molar teeth roots (dental type). All of these bifid canal types were unilateral. Conclusions: Our results depicted the anatomical variations of the mandibular canal. Dental practitioners should be aware of this underestimated but not a rare occurrence of mandibular canal variations in order to avoid complication during surgical procedures.

Prevalence of bifid mandibular canal according to gender, type and side

Background/purpose

An awareness of mandibular canal variations may help prevent complications due to nerve damage that can occur during surgery. The aim of this study is to evaluate the variations of mandibular canal distribution and frequency via cone beam computed tomography (CBCT), retrospectively, in a Turkish population.

Materials and methods

The study population comprises 500 (250 female, 250 male) randomly selected participants between the ages of 14 and 79 years. The study was conducted in Marmara University, Faculty of Dentistry, in the Department of Dentomaxillofacial Radiology. The distribution and frequency of mandibular canal variations were evaluated using the Naitoh classification, which includes retromolar canal, forward canal, dental canal, and buccolingual canal. The trifid canal was also included in this study. The data were analysed using IBM SPSS statistics 20.0. The data were then compared based on age group and gender.

Results

Bifid mandibular canals (BMCs) were found in 200 (40%) of the 500 subjects, and in 248 of the 1000 sides (24.8%). Mandibular canal variations were observed in 71.5% of patients on the right side, 52.5% on left side and 24% bilaterally. The forward canal was the most common type (48.8%), followed by the retromolar canal (26.2%), the dental canal (12.9%), the buccolingual canal (9.7%), and the trifid canal (2.4%).

Conclusion

BMCs were detected at a high rate in the Turkish subpopulation. Moreover, CBCT appears to be an appropriate method to assess the entity and shape of BMCs.

Topographical distribution of neurovascular canals and foramens in the mandible: avoiding complications resulting from their injury during oral surgical procedures

Purpose

Certain oral surgical procedures can injure neurovascular canals and foramens in the mandible. Hence, before performing surgical procedures, it is important to assess the distribution of the bifid mandibular canal (BMC), accessory mental foramen (AMF), medial lingual canal (MLC), lateral lingual canal (LLC), buccal foramen (BF), and lingual alveolar canal (LAC). This study aimed to assess the distribution of different types of canals and foramens. Furthermore, we investigated the limitations associated with finding these structures in panoramic images.

Methods

Fifty-eight patients who had undergone panoramic radiography and computed tomography (CT) scans at our hospital were randomly selected for this study. Imaging data obtained from these patients were retrospectively reviewed.

Results

We found that the occurrence of BMC was 60.3%, AMF was 6.9%, MLC was 98.2%, LLC was 75.9%, BF was 43.1%, and LAC was 98.3%. Edge-contrasted inverted panoramic images revealed BMCs in 21.7% and AMFs in 25%; however, most of these canals could not be detected. In the panoramic images, the average diameter of the BMC was significantly different between the detected group and not detected group. The number of canals and foramens in the anterior region to the molar region decreased on the buccal and lingual sides, and most BMCs were in the retromolar to the ramus region.

Conclusion

Our results indicated different distributions and occurrence rates of each type of neurovascular canal and foramens.

Bifurcation of the inferior dental nerve canal: an anatomical study

The aims of this study were to find the incidence of bifurcation of the inferior dental nerve (IDN) canal, to describe the characteristics of this variant, and to examine the sensitivity and specificity of dental panoramic tomography to identify it. We classified bifurcations by size and position relative to the main canal and the lower third molar using cone-beam computed tomography (CT) and dental panoramic tomography. In our study of 281 patients, 106 (38%) had bifurcations, and in one quarter, these were classified as large accessory canals. Bifurcations were most commonly found posterior to the lower third molar (n=64, 57%) or within 2mm of the roots of the third molar (n=40, 38%). The sensitivity and specificity of dental panoramic tomography to identify all bifurcations was 11% (95% CI: 5.67 to 17.97) and 91% (95% CI: 85.58 to 94.68), respectively; this was 33% (95% CI: 15.63 to 55.32) and 94% (95% CI: 90.34 to 96.50), respectively, for large bifurcations. Our use of cone-beam CT suggested an incidence of bifid canals of 38%, with a variation in size and distribution in relation to the lower third molar. It also showed that the sensitivity of panoramic radiography to identify them was poor.

[Bifid mandibular canal]

The article describes three types of bifurcations of the mandibular canal that were identified as accidental findings in cone-beam computed tomograms of the maxillofacial area of patients subjected to dental treatment. Bifid mandibular canal types are illustraded with clinical cases.

Clinical Anatomy and Significance of the Retromolar Foramina and Their Canals: A Literature Review

The retromolar foramina (RMF) and the retromolar canal (RMC) are anatomic variants in the mandible located distally to the last molar. The retromolar nerve, which runs through the RMC, is a type 1 bifidity of the mandibular canal. The investigations of the RMF and RMC have been performed by dry mandible studies, the panoramic radiograph (PAN), computed tomography (CT), and the cone beam computed tomography (CBCT) studies. The CBCT has been shown to be the superior method for visualizing the RMF and RMC. There is wide variation in the frequency, location, diameter, and distance of the canal in different individuals. Overall, there is no significant difference in the frequency of the canal in the mandible between sexes or sides of the mandible. The peak incidence of the RMF may occur in adolescence. The RMC is significant due to the neurovascular bundle which runs through it. Injury to this neurovascular bundle during surgical procedures, such as third molar extraction, implant placement, or split sagittal osteotomy, may lead to paresthesia, excessive bleeding, or traumatic neuroma. The presence of RMC may also lead to insufficient anesthesia in the mandible which may be overcome with alternative anesthetic techniques.

Anatomical variations of mandibular canal detected by panoramic radiography and CT: a systematic review and meta-analysis

OBJECTIVES

To investigate the anatomical variations of the mandibular canal through assessment in situ, panoramic radiography, CT or CBCT and assess their frequency.

METHODS

Articles were selected from databases (Cochrane Library, LILACS, ProQuest, PubMed, Scopus, Web of Science and Google Scholar), articles without limitations of language, in which the main objective was to evaluate the frequency of bifurcation of the mandibular canal through assessment in situ, panoramic radiography, CT or CBCT were selected. A meta-analysis of prevalence using random effects was performed.

RESULTS

Using a selection process in two phases, 15 articles were identified, and a meta-analysis was conducted. The results from these meta-analyses showed that the overall prevalence of anatomical variations for in situ studies was 6.46%, and through assessment of panoramic radiography and CT or CBCT the overall prevalence shown was 4.20% and 16.25%, respectively.

CONCLUSIONS

There are two types of variations of the mandibular canal: the retromolar canal and bifid mandibular canal. The frequency variations through assessing in situ, panoramic radiography and CT or CBCT were 6.46%, 4.20% and 16.25%, respectively.