Preparation and evaluation of liquid-crystal formulations with skin-permeation-enhancing abilities for entrapped drugs

Influence of the emulsifier on nanostructure and clinical application of liquid crystalline emulsions

Liquid crystals are appealing in pharmaceutical and cosmetic fields due to their unique structures that combine the properties of both liquid and solid states. Forming an emulsion into liquid crystals can be affected by a number of factors, including the emulsion composition and temperature. Changing the types and concentrations of surfactants could be another factor that affects liquid crystals. Currently, most liquid crystal research focuses on the nanostructure of liquid crystal systems without evaluating the efficacy of liquid crystals clinically. In this study, liquid crystalline emulsions made from camellia seed oil with four different surfactants (Olivem 1000, Polyaquol-2W, Nikkomulese LC, and Lecinol S-10 with Tween 80) were created. The liquid crystal emulsions were formulated in the form of oil-in-water (o/w) emulsions with Camellia oleifera seed oil serving as the main ingredient in the oil phase (10% w/w). All formulations exhibited liquid crystal characteristics with lamellar structures as determined by the polarized light microscopy and small-angle X-ray scattering with supporting data of the nanostructure from wide-angle X-ray scattering and differential scanning calorimetry (DSC). They all showed good stability under normal (room temperature) and accelerated conditions (4 °C and 40 °C) in long-term storage (6 months). Using the reconstructed human epidermis as a skin model, all formulations did not cause skin irritation. In the clinical trial, all formulations were able to reduce transepidermal water loss (TEWL) and increase skin hydration immediately after application. This lasted at least 10 h. All formulations showed distinct Maltese crosses under the polarized light microscope with a positive result for liquid crystals in wide angle X-ray scattering (WAXS) and small angle X-ray scattering (SAXS) methods. Moreover, among all formulations tested, Formulation D, which contained Lecinol S-10 and Tween 80 as emulsifiers, showed the most robust interaction between the surfactant and water molecules in the lamellar structure under DSC. The formulation was stable in long-term normal and accelerated conditions. Above all, Formulation D, which was formulated with Lecinol S-10 with Tween 80, had the best clinical result, was nonirritating to the skin, and can be used as a cream base in the pharmaceutical and cosmeceutical sectors.

Lipidic lyotropic liquid crystals: Insights on biomedical applications

Liquid crystals (LCs) possess unique physicochemical properties, translatable into a wide range of applications. To date, lipidic lyotropic LCs (LLCs) have been extensively explored in drug delivery and imaging owing to the capability to encapsulate and release payloads with different characteristics. The current landscape of lipidic LLCs in biomedical applications is provided in this review. Initially, the main properties, types, methods of fabrication and applications of LCs are showcased. Then, a comprehensive discussion of the main biomedical applications of lipidic LLCs accordingly to the application (drug and biomacromolecule delivery, tissue engineering and molecular imaging) and route of administration is examined. Further discussion of the main limitations and perspectives of lipidic LLCs in biomedical applications are also provided. STATEMENT OF SIGNIFICANCE: Liquid crystals (LCs) are those systems between a solid and liquid state that possess unique morphological and physicochemical properties, translatable into a wide range of biomedical applications. A short description of the properties of LCs, their types and manufacturing procedures is given to serve as a background to the topic. Then, the latest and most innovative research in the field of biomedicine is examined, specifically the areas of drug and biomacromolecule delivery, tissue engineering and molecular imaging. Finally, prospects of LCs in biomedicine are discussed to show future trends and perspectives that might be utilized. This article is an ampliation, improvement and actualization of our previous short forum article "Bringing lipidic lyotropic liquid crystal technology into biomedicine" published in TIPS.

Preparation and In Vitro Evaluation of W/O Nanoemulsions for the Skin Permeation of 5-Aminolevulinic Acid

We investigated the skin permeation of 5-aminolevulinic acid (ALA) through Yucatan micropig full-thickness skin by using ALA-loaded W/O nanoemulsions composed of Span/Tween/ethanol (EtOH)/isopropyl palmitate (IPP)/10 wt% aqueous ALA solution. The nanoemulsions were prepared using Span 20/Tween 20 (S20/T20), Span 80/Tween 80 (S80/T80), and Span 20/Tween 80 (S20/T80) mixed surfactant systems. Based on the results of the phase diagram study and hydrodynamic diameter measurement of the nanoemulsions, we decided that the optimal weight ratio of Span/Tween/EtOH/IPP/10 wt% aqueous ALA solution in the nanoemulsion was 0.8/0.2/14/19/1.4. The permeability coefficient of ALA in the S20/T80 system was approximately five times larger than those in the S20/T20 and S80/T80 systems. The high skin permeation of ALA afforded by the ALA-loaded W/O nanoemulsion in the S20/T80 system is attributable to a significant enhancement in the partitioning of ALA to the stratum corneum.

Design of Swollen Lipidic Cubic Phase to Increase Transcutaneous Penetration of Biomacromolecules

Lipidic cubic phase (LCP) is a self-assembled system composed of lipids with interpenetrated aqueous channels, and its potential in drug delivery systems has been investigated. Although LCP was shown to improve transcutaneous penetration of hydrophilic molecules of up to 1203 Da so far, the transcutaneous delivery of larger molecules such as proteins has not been achieved. This is likely because proteins are usually larger than the aqueous channels of LCP (∼37.2 Å in diameter), which limits the molecular diffusion in LCP. In this report, we overcome this issue by adding N-octyl-β-d-glucopyranoside to glyceryl monooleate-water-based LCP to give swollen LCP (SLCP), which has larger aqueous channel diameters (∼65.6 Å). First, we systemically evaluated the effect of swelling on drug diffusion in LCP/SLCP. The release kinetics of various peptides and proteins whose sizes ranged from 9.14 to 55.28 Å in diameter were evaluated, and the diffusion coefficients (D) were calculated by the Fickian diffusion model. As expected, all peptides and proteins diffused faster in SLCP than in LCP. A more detailed analysis revealed a negative linear relationship between log D and the ratio of the radius of gyration of the proteins to the aqueous channel radius, indicating that swelling of a cubic nanostructure is an effective strategy to enhance D. Next, the skin penetration of proteins encapsulated in LCP and SLCP was evaluated. The skin penetration of ovalbumin (42.9 kDa), for example, was enhanced by SLCP but not by LCP, and a positive correlation between D and the amount of skin penetration was found. Collectively, this study provides an effective measure for designing LCP systems that enhance transcutaneous penetration of biomacromolecules.

Formulation of Novel Liquid Crystal (LC) Formulations with Skin-Permeation-Enhancing Abilities of Plantago lanceolata (PL) Extract and Their Assessment on HaCaT Cells

Exposure to reactive oxygen species can easily result in serious diseases, such as hyperproliferative skin disorders or skin cancer. Herbal extracts are widely used as antioxidant sources in different compositions. The importance of antioxidant therapy in inflammatory conditions has increased. Innovative formulations can be used to improve the effects of these phytopharmacons. The bioactive compounds of Plantago lanceolata (PL) possess different effects, such as anti-inflammatory, antioxidant, and bactericidal pharmacological effects. The objective of this study was to formulate novel liquid crystal (LC) compositions to protect Plantago lanceolata extract from hydrolysis and to improve its effect. Since safety is an important aspect of pharmaceutical formulations, the biological properties of applied excipients and blends were evaluated using assorted in vitro methods on HaCaT cells. According to the antecedent toxicity screening evaluation, three surfactants were selected (Gelucire 44/14, Labrasol, and Lauroglycol 90) for the formulation. The dissolution rate of PL from the PL-LC systems was evaluated using a Franz diffusion chamber apparatus. The antioxidant properties of the PL-LC systems were evaluated with 2,2-diphenyl-1-picrylhydrazyl (DPPH) and malondialdehyde (MDA) assessments. Our results suggest that these compositions use a nontraditional, rapid-permeation pathway for the delivery of drugs, as the applied penetration enhancers reversibly alter the barrier properties of the outer stratum corneum. These excipients can be safe and highly tolerable thus, they could improve the patient’s experience and promote adherence.

Enhancement of Skin Permeation of a Hydrophilic Drug from Acryl-Based Pressure-Sensitive Adhesive Tape

PURPOSE

Penetration enhancers are necessary to overcome a formidable barrier function of the stratum corneum in the development of topical formulations. Recently, non-lamella liquid crystal (NLLC)-forming lipids such as glycerol monooleate and phytantriol (PHY) are gaining increasing attention as a novel skin permeation enhancer. In the present study, fluorescein sodium (FL-Na) was used as a model hydrophilic drug, and acryl-base pressure-sensitive adhesive (PSA) tape containing NLLC forming lipids, mono-O-(5,9,13-trimethyl-4-tetradecenyl) glycerol ester (MGE) or PHY, was prepared to enhance drug permeation through the skin.

METHODS

A PSA patch containing FL-Na was prepared by mixing FL-Na entrapped in NLLC and acrylic polymer. FL permeation through excised hairless rat skin, and also human skin, was investigated. Changes in lipid structure, folding/unfolding state of keratin in the stratum corneum, and penetration of MGE into the stratum corneum were investigated using confocal Raman microscopy.

RESULTS

Enhanced FL permeation was observed by the application of a PSA patch containing MGE and PHY. Especially, dramatically enhancement effect was confirmed by 15% of MGE contained formulation. Penetration of MGE provided diminished orthorhombic crystal structure and a peak shift of the aliphatic CH₃ vibration of keratin chains toward lower wavenumbers.

CONCLUSION

The present results suggested that the formulation development by adding MGE may be useful for improving the skin permeation of mal-permeable drugs such as hydrophilic drugs.

Development of a Liquid Crystal Formulation that Can Penetrate the Stratum Corneum for Intradermal Delivery of Small Interfering RNA

Topical delivery of small interfering RNA (siRNA) can be an attractive method for the treatment of skin diseases and improving the quality of life of patients. However, it is difficult for siRNA to pass through the two major barriers of the skin: the stratum corneum (SC) and tight junctions. We have previously reported that atopic dermatitis of skin without the SC can be efficiently treated by the intradermal administration of trans-activator of transcription (Tat) peptide and AT1002 (tight junction opening peptide). However, novel drug delivery systems are needed for effective SC penetration. Therefore, in the present study, we aimed to develop a lyotropic liquid crystalline (LC) system containing Tat and AT1002 for effective siRNA penetration through the SC. An LC formulation was prepared using selachyl alcohol and purified water, and its skin penetration ability was evaluated. No fluorescence was observed in mouse skin treated with a siRNA solution, as there was no intradermal localization of siRNA from naked siRNA. However, intradermal delivery of siRNA was remarkable and extensive with the LC formulation containing both Tat and AT1002. Semiquantitative analysis by brightness measurement revealed that the LC formulation containing both Tat and AT1002 had significantly enhanced intact skin permeability than other formulations. These results show that the functional peptides in the LC formulation increased SC penetration and intradermal delivery in the healthy skin. Therefore, this novel LC system may be useful in the treatment of various skin diseases.

Cubic and hexagonal liquid crystals as drug carriers for the transdermal delivery of triptolide

The purpose of this study was to develop and evaluate triptolide-loaded cubic and hexagonal liquid crystals for transdermal drug delivery systems (TDDSs). We prepared and characterized triptolide-loaded lyotropic liquid crystals and evaluated for their percutaneous permeation properties in vitro and in vivo. We then used the adjuvant arthritic rat model and HaCaT cells to analyze the pharmacodynamics and conduct cell-stimulating studies of these liquid crystals. The optimized preparations were identified as cubic and hexagonal phase structures, respectively. Moreover, the in vitro percutaneous penetration studies demonstrated that compared to the homemade triptolide gel, cubic and hexagonal liquid crystals could significantly increase the percutaneous cumulative penetration of drugs within 48 h. Besides, the results of skin-blood synchronous microdialysis showed that the triptolide concentration in skin was higher than that in blood, and the cubic and hexagonal liquid crystals significantly increased the bioavailability of triptolide. Triptolide-loaded cubic and hexagonal liquid crystals presented excellent anti-arthritic effects, alleviating paw swelling and inhibiting inflammation by downregulating the levels of TNF-α and IL-1β. In vitro cell-stimulating studies displayed that triptolide-loaded cubic and hexagonal liquid crystals exhibited no obvious toxicity, which exhibited that triptolide-loaded cubic and hexagonal liquid crystals were remarkable biocompatibility. Collectively, triptolide-loaded cubic and hexagonal liquid crystals represented a promising candidate for rheumatoid arthritis therapy.

Preparation and Evaluation of Lipid-Based Liquid Crystalline Formulation of Fenofibrate

BACKGROUND

Many drugs have poor water solubility and so the oral delivery of such drugs is usually associated with limitation of low bioavailability and lack of dose proportionality. Lipid-based liquid crystal (LC) systems are excellent potential formulations for increasing dissolution and bioavailability of drugs. The aim of the present study was to formulate lipid-based LC containing fenofibrate (FFB) as a hydrophobic drug.

MATERIALS AND METHODS

The studied variables included lipid and stabilizer concentrations and the type of stabilizer. The LC formation was identified by the polarized optical microscopic method. The effects of variables on formulation characteristics such as particle size, drug release, and rheological behavior were evaluated.

RESULTS

The results showed that the prepared formulations had the particle size between 42 and 503 nm. The drug release profiles showed that FFB had the continuous release from the formulations and the highest dissolution efficiency was seen in formulation prepared by 1.5% of glyceryl monostearate and 0.5% of Pluronic F127 as the stabilizer. The change of stabilizer type from colloidal silica to Pluronic F127 increased the drug release, significantly.

CONCLUSIONS

In the most formulations of FFB LCs, the DE% was more than the pure drug, and therefore, it seems that the liquid crystalline formulations can be effective for enhancing drug release. Furthermore, drug release rate depended on the stabilizer type so that the presence of colloidal silica caused slower drug release compared to Pluronic F127.

Nonlamellar liquid crystals: a new paradigm for the delivery of small molecules and bio-macromolecules

The aim of this article is to collate the recent developments in the field of drug delivery, medical therapeutics and diagnostics specifically involving the nonlamellar liquid crystalline (NLC) systems. This review highlights different NLC phases having cubic, hexagonal and sponge internal structures, and their application in the field of drug delivery, such as dose reduction, toxicity reduction and therapeutic efficacy enhancement either in the form of nanoparticles, colloidal dispersion or gels. In addition, application of NLC systems as vehicles for peptides, proteins and as a theranostic system in cancer and other disease conditions is also elaborated, which is a growing platform of interest. Overall, the present review gives us a complete outlook on applications of NLC systems in the field of medicine.

Development of microemulsions for ocular delivery

Microemulsions (MEs) are thermodynamic stable dispersion of oily phase and aqueous phase stabilized by surfactants and co-surfactants, and are a small droplet size of less than 100 nm. MEs are appropriate systems for ocular drug delivery because they improve ocular drug retention, extended duration of action, high ocular absorption, permeation of loaded drugs and effortlessness of preparation and administration. This review is an effort to summarize the recent development in the area of MEs, self-emulsifying drug delivery systems, which are examined in relation to their uses in ocular drug delivery. The noteworthy patent, toxicity and stability issues related to these ME systems are also explored here.

Structural Features and the Anti-Inflammatory Effect of Green Tea Extract-Loaded Liquid Crystalline Systems Intended for Skin Delivery

Camellia sinensis, which is obtained from green tea extract (GTE), has been widely used in therapy owing to the antioxidant, chemoprotective, and anti-inflammatory activities of its chemical components. However, GTE is an unstable compound, and may undergo reactions that lead to a reduction or loss of its effectiveness and even its degradation. Hence, an attractive approach to overcome this problem to protect the GTE is its incorporation into liquid crystalline systems (LCS) that are drug delivery nanostructured systems with different rheological properties, since LCS have both fluid liquid and crystalline solid properties. Therefore, the aim of this study was to develop and characterize GTE-loaded LCS composed of polyoxypropylene (5) polyoxyethylene (20) cetyl alcohol, avocado oil, and water (F25E, F29E, and F32E) with different rheological properties and to determine their anti-inflammatory efficacy. Polarized light microscopy revealed that the formulations F25, F29, and F32 showed hexagonal, cubic, and lamellar liquid crystalline mesophases, respectively. Rheological studies showed that F32 is a viscous Newtonian liquid, while F25 and F29 are dilatant and pseudoplastic non-Newtonian fluids, respectively. All GTE-loaded LCS behaved as pseudoplastic with thixotropy; furthermore, the presence of GTE increased the S values and decreased the n values, especially in F29, indicating that this LCS has the most organized structure. Mechanical and bioadhesive properties of GTE-unloaded and -loaded LCS corroborated the rheological data, showing that F29 had the highest mechanical and bioadhesive values. Finally, in vivo inflammation assay revealed that the less elastic and consistent LCS, F25E and F32E presented statistically the same anti-inflammatory activity compared to the positive control, decreasing significantly the paw edema after 4 h; whereas, the most structured and elastic LCS, F29E, strongly limited the potential effects of GTE. Thereby, the development of drug delivery systems with suitable rheological properties may enhance GTE bioavailability, enabling its administration via the skin for the treatment of inflammation.

Liquid Crystal Systems in Drug Delivery

Liquid crystals have been recently studied as novel drug delivery system. The reason behind this is their similarity to colloidal systems in living organisms. They have proven to be advantageous over Traditional, Dermal, Parentral and Oral Dosage forms. Liquid crystals are thermodynamically stable and possess long shelf life. Liquid crystals show bio adhesive properties and sustained release effects. Objective of this book chapter is to provide in-depth information of Pharmaceutical crystal technology. It shall deal with cubic and hexagonal liquid crystal and their applications in Drug delivery system.

Contribution of the Hair Follicular Pathway to Total Skin Permeation of Topically Applied and Exposed Chemicals

Generally, the blood and skin concentration profiles and steady-state skin concentration of topically applied or exposed chemicals can be calculated from the in vitro skin permeation profile. However, these calculation methods are particularly applicable to chemicals for which the main pathway is via the stratum corneum. If the contribution of hair follicles to the total skin permeation of chemicals can be obtained in detail, their blood and skin concentrations can be more precisely predicted. In the present study, the contribution of the hair follicle pathway to the skin permeation of topically applied or exposed chemicals was calculated from the difference between their permeability coefficients through skin with and without hair follicle plugging, using an in vitro skin permeation experiment. The obtained results reveal that the contribution of the hair follicle pathway can be predicted by using the chemicals’ lipophilicity. For hydrophilic chemicals (logarithm of n-octanol/water partition coefficient (log K_o/w) < 0), a greater reduction of permeation due to hair follicle plugging was observed than for lipophilic chemicals (log K_o/w ≥ 0). In addition, the ratio of this reduction was decreased with an increase in log K_o/w. This consideration of the hair follicle pathway would be helpful to investigate the efficacy and safety of chemicals after topical application or exposure to them because skin permeation and disposition should vary among skins in different body sites due to differences in the density of hair follicles.

Design, characterization, and biological evaluation of curcumin-loaded surfactant-based systems for topical drug delivery

From previous studies, it has been found that curcumin exhibits an anti-inflammatory activity and is being used for the treatment of skin disorders; however, it is hydrophobic and has weak penetrating ability, resulting in poor drug transport through the stratum corneum. The aim of this study was to develop liquid crystalline systems for topical administration of curcumin for the treatment of inflammation. These liquid crystalline systems were developed from oleic acid, polyoxypropylene (5) polyoxyethylene (20) cetyl alcohol, and water as the surfactant, oil phase, and aqueous phase, respectively. These systems were characterized, and polarized light microscopy showed anisotropy with lamellar mesophases (Formulation 1) and hexagonal mesophases (Formulations 2 and 3), which were confirmed by the peak ratio measured using small-angle X-ray scattering. In addition, rheological tests revealed that the formulations exhibited gel-like behavior (G′>G″), as evidenced by the increased G′ values that indicate structured systems. Texture profile analysis showed that hexagonal mesophases have high values of hardness, adhesiveness, and compressibility, which indicate structured systems. In vitro studies on bioadhesion revealed that the hexagonal mesophases increased the bioadhesiveness of the systems to the skin of the pig ear. An in vivo inflammation experiment showed that the curcumin-loaded hexagonal mesophase exhibited an anti-inflammatory activity as compared to the positive control (dexamethasone). The results suggest that this system has a potential to be used as a bioadhesive vehicle for the topical administration of curcumin. Therefore, it is possible to conclude that these systems can be used for the optimization of drug delivery systems to the skin.

Usefulness of liquid-crystal oral formulations to enhance the bioavailability and skin tissue targeting of p-amino benzoic acid as a model compound

Topical formulations are not always suitable to deliver active ingredients to large areas of skin. Thus, in this study, we aimed to develop an oral formulation for skin tissue targeting with a high bioavailability using liquid crystal (LC) dispersions comprising cubosomes of a mal-absorptive model compound, p-amino benzoic acid (PABA), which is an active element in cosmeceuticals, dietary supplements and skin disorder medicines. The bioavailability and skin concentration of PABA were investigated after oral administration in rats. The effect of the remaining amount of the LC formulation in the stomach on the pharmacokinetic profiles of orally administered PABA was evaluated. The skin permeation and concentration of PABA were also investigated using an in vitro permeation experiment. As a result, the bioavailability of PABA was significantly improved by administration of PABA-LC formulations compared with PABA solution alone, although the effect was greatly influenced by the type of LC-forming lipids. The in vitro skin permeation study showed that the PABA concentration in the skin when applied from the dermis side was higher than when applied from the epidermis side. These findings suggested that oral administration advantageously supports skin targeting, and oral LC formulations could be a promising material in cosmeceutical, dietary and clinical fields.

Cubic and hexagonal liquid crystals as drug delivery systems

Lipids have been widely used as main constituents in various drug delivery systems, such as liposomes, solid lipid nanoparticles, nanostructured lipid carriers, and lipid-based lyotropic liquid crystals. Among them, lipid-based lyotropic liquid crystals have highly ordered, thermodynamically stable internal nanostructure, thereby offering the potential as a sustained drug release matrix. The intricate nanostructures of the cubic phase and hexagonal phase have been shown to provide diffusion controlled release of active pharmaceutical ingredients with a wide range of molecular weights and polarities. In addition, the biodegradable and biocompatible nature of lipids demonstrates the minimum toxicity and thus they are used for various routes of administration. Therefore, the research on lipid-based lyotropic liquid crystalline phases has attracted a lot of attention in recent years. This review will provide an overview of the lipids used to prepare cubic phase and hexagonal phase at physiological temperature, as well as the influencing factors on the phase transition of liquid crystals. In particular, the most current research progresses on cubic and hexagonal phases as drug delivery systems will be discussed.

Topical cream-based dosage forms of the macrocyclic drug delivery vehicle cucurbit[6]uril

The macrocycle family of molecules called cucurbit[n]urils are potential drug delivery vehicles as they are able to form host-guest complexes with many different classes of drugs. This study aimed to examine the utility of Cucurbit[6]uril (CB[6]) in topical cream-based formulations for either localised treatment or for transdermal delivery. Cucurbit[6]uril was formulated into both buffered cream aqueous- and oily cream-based dosage forms. The solid state interaction of CB[6] with other excipients was studied by differential scanning calorimetry and the macrocycle's transdermal permeability was determined using rat skin. Significant solid state interactions were observed between CB[6] and the other dosage form excipients. At concentrations up to 32% w/w the buffered aqueous cream maintained its normal consistency and could be effectively applied to skin, but the oily cream was too stiff and is not suitable as a dosage form. Cucurbit[6]uril does not permeate through skin; as such, the results imply that cucurbituril-based topical creams may potentially only have applications for localised skin treatment and not for transdermal drug delivery.