Medial Patellofemoral Ligament Reconstruction: A Comprehensive Review

A Comparison of Proximal Patellar Realignment vs. Medial Patellofemoral Ligament Reconstruction: A Review of the Literature

» Patellar instability is challenging to address, and although there are many surgical options, proximal patellar realignment (PPR) and medial patellofemoral ligament (MPFL) reconstruction are both used-recently, the MPFL reconstruction has become more popularized.» Both procedures have demonstrated similar recurrent dislocation rates and rates of arthritic progression.» PPR is a cost-efficient procedure using just suture alone as compared with MPFL reconstruction, which uses different grafts and methods of fixation.» PPR has demonstrated durable results, with a lower overall complication rate, much of which is caused by the MPFL reconstruction having unique complications due to fixation methods.» The PPR is a beneficial procedure and should still be considered when dealing with patellar instability.

Is kinesiophobia associated with functional outcome measures in patients following medial patellofemoral ligament reconstruction?

BACKGROUND

This study aimed to investigate the potential relationship between kinesiophobia and functional outcomes in patients following medial patellofemoral ligament reconstruction (MPFLr).

METHODS

Twenty-one patients (six males, 15 females) who underwent MPFLr between 2016 and 2020, (23.57 ± 9.49 years old) with a mean follow up period of 52.33 ± 24.82 months were included in the study. Following an assessment of patellar stability and alignment, kinesiophobia levels, function and balance were measured. The kinesiophobia was measured using the Tampa Scale of Kinesiophobia, while functional outcomes were assessed with the single-leg hop test, Y-Balance test and single-leg sway index. The self-reported function was measured by Kujala patellofemoral score and Lysholm knee score.

RESULTS

The patients exhibited kinesiophobia scores of 43.10 ± 6.90. A negative correlation existed between kinesiophobia and both the Kujala scores (r = -0.75, P < 0.001) and the Lysholm scores (r = -0.79, P < 0.001). Moderate negative correlations were observed between kinesiophobia and the single-leg hop distance (r = -0.64, P < 0.01), as well as in Y-Balance test anterior reach distance (r = -0.51, P < 0.01) and posterolateral reach distance (r = -0.55, P < 0.01). Additionally, a low negative correlation was noted between kinesiophobia and Y-Balance test posteromedial reach distances (r = -0.43, P = 0.05), as well as the total sway index (r = -0.46, P = 0.04).

CONCLUSIONS

A high level of kinesiophobia was strongly correlated with self-reported functional scores and moderately correlated with measured functional outcomes. The findings underscore a notable prevalence of kinesiophobia following biomechanically successful MPFLr. Investigating the impact of kinesiophobia on outcomes after MPFLr may provide a better understanding of patient recovery.

Biomechanical Properties and Kinematics of Medial Patellofemoral Ligament Reconstruction: A Systematic Review

Background

While the biomechanical properties of the native medial patellofemoral ligament (MPFL) have been well studied, there is no comprehensive summary of the biomechanics of MPFL reconstruction (MPFLR). An accurate understanding of the kinematic properties and functional behavior of current techniques used in MPFLR is imperative to restoring native biomechanics and improving outcomes.

Purpose

To provide a comprehensive review of the biomechanical effects of variations in MPFLR, specifically to determine the effect of graft choice and reconstruction technique.

Study Design

Systematic review.

Methods

A systematic review was performed in accordance with the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. A total of 32 studies met inclusion criteria: (1) using ≥8 human cadaveric specimens, (2) reporting on a component of MPFLR, and (3) having multiple comparison groups.

Results

Gracilis, semitendinosus, and quadriceps grafts demonstrated an ultimate load to failure (N) of 206.2, 102.8, and 190.0 to 205.0 and stiffness (N/mm) of 20.4, 8.5, and 21.4 to 33.6, respectively. Single-bundle and double-bundle techniques produced an ultimate load to failure (N) of 171 and 213 and stiffness (N/mm) of 13.9 and 17.1, respectively. Anchors placed centrally and superomedially in the patella produced the smallest degree of length changes throughout range of motion in contrast to anchors placed more proximally. Sutures, suture anchors, and transosseous tunnels all produced similar ultimate load to failure, stiffness, and elongation data. Femoral tunnel malpositioning resulted in significant increases in contact pressures, patellar translation, tilt, and graft tightening or loosening. Low tension grafts (2 N) most closely restored the patellofemoral contact pressures, translation, and tilt. Graft fixation angles variably and inconsistently altered contact pressures, and patellar translation and tilt.

Conclusion

Data demonstrated that placement of the MPFLR femoral tunnel at the Schöttle point is critical to success. Femoral tunnel diameter should be ≥2 mm greater than graft diameter to limit graft advancement and overtensioning. Graft fixation, regardless of graft choice or fixation angle, is optimally performed under minimal tension with patellar fixation at the medial and superomedial patella. However, lower fixation angles may reduce graft strain, and higher fixation angles may exacerbate anisometry and length changes if femoral tunnel placement is nonanatomic.

No Difference in Pullout Strength Between a Bio-inductive Implant and a Semitendinosus Tendon Graft in a Biomechanical Study of Medial Patellofemoral Ligament Repair Augmentation

Purpose

To compare the pullout strength of a bio-inductive implant (BI) used to augment a medial patellofemoral ligament (MPFL) repair with the pullout strength of semitendinosus graft in a biomechanical cadaveric model.

Methods

Six matched pairs of cadavers (12 knees) were used in the biomechanical testing comparing semitendinosus tendon (Semi-T) versus a BI. The Semi-T was harvested from 1 of the matched pairs. A standard double-bundle technique using 2 sockets in the upper two-thirds of the patella 15 mm apart was performed. After docking of the graft into the patella, the patella was dissected free of soft tissues and potted into a fixture to allow mechanical pull parallel to the transverse axis of the patella. The construct was pulled to failure.

Results

There was no statistically significant difference in pullout strength (P = .77) between the BI group (249.3 ± 36.3 N) and Semi-T group (235.0 ± 113.6 N) double-bundle constructs. In the Semi-T group, 50% of the specimens (3 of 6 knees) failed via anchor pullout and a fourth specimen failed at the suture-anchor interface (16.7%), whereas in the BI group, 16.7% of the specimens (1 of 6 knees) failed by anchor pullout. Although the Semi-T group (49.5 ± 14.1 N/mm) showed significantly greater stiffness than the BI group (13.8 ± 0.6 N/mm, P < .01), pullout strength in the Semi-T group was highly variable: 50% of the specimens (3 of 6 knees) with semitendinosus constructs failed at 5 mm of displacement or less via graft or anchor pullout. Maximum load, displacement at failure, stiffness, and load at 5 mm were compared between the augmented and non-augmented control specimens using a 2-tailed non-equal variance Student t test. For all comparisons, P < .05 was considered to indicate a statistically significant difference.

Conclusions

In this biomechanical study, augmentation of an MPFL reconstruction using a common double-bundle technique with a BI had the same pullout strength as a semitendinosus graft using the same technique in cadaveric knees.

Clinical Relevance

MPFL repair after a patellar dislocation may be inadequate to restore the strength of the native MPFL and prevent recurrent patellar instability. Recurrent instability of the patella can result in progressive injury to the soft tissue and articular cartilage of the patella and femur. It is important to study the techniques used for MPFL repair to continually improve patient outcomes. Further testing of these additional techniques and clinical studies are needed to evaluate the implants used to augment MPFL repairs.

MPFL reconstruction with proximal rather than distal femoral tunnel position leads to less favorable short-term results

BACKGROUND

This study aimed to compare the clinical and radiological outcomes of medial patellofemoral ligament (MPFL) reconstruction (MPFLR) between anatomic femoral tunnel positions: proximal (near adductor tubercle [AT]) and distal (near medial epicondyle [ME]).

HYPOTHESIS

MPFLR with the proximal femoral tunnel position has worse clinical and radiological outcomes than those with the distal femoral tunnel position.

PATIENTS AND METHODS

Fifty-five patients who underwent isolated MPFLR with proximal or distal femoral tunnels with at least 2 years of follow-up were retrospectively analyzed. Based on postoperative CT images, 28 patients were classified as group AT and the remaining 27 patients were classified as group ME. The International Knee Documentation Committee, Lysholm, Tegner, Kujala scores, and complications were evaluated. Radiologically, the Caton-Deschamps Index (CDI), patellar tilt angle, patellofemoral osteoarthritis (PFOA), patellofemoral cartilage status by the International Cartilage Repair Society (ICRS) grade, bone contusion, and MPFL graft signal intensity were evaluated.

RESULTS

All clinical scores significantly improved in both groups (p<0.01). No statistically significant difference was noted between the two groups in regards to their preoperative demographic data, postoperative clinical scores, complications, or radiological findings (CDI, patellar tilt angle, PFOA, bone contusion, and graft signal intensity). The group AT had worse cartilage status on the medial facet of the patella (p=0.02). The ICRS grade for the medial facet of the patella statistically progressed in group AT compared to group ME (p=0.04) as well.

DISCUSSION

Both groups showed significantly improved clinical outcomes. However, for the medial facet of the patella, MPFLR with the proximal femoral tunnel position had worse cartilage status and ICRS grade progression than those with the distal femoral tunnel position.

LEVEL OF EVIDENCE

III; retrospective comparative study.

Medium to long-term outcomes of medial patellofemoral ligament reconstruction using the superficial quadriceps versus a hamstring autograft in patellar instability patients

Medial patellofemoral ligament (MPFL) reconstruction is a standard procedure in patellar dislocation patients. Superficial quadriceps autografts (QA) and hamstring autografts (HA) are popular graft choices in MPFL reconstruction with the lack of directly compared clinical studies between both methods. A total of 43 patellar instability patients, who underwent QA and HA for patellar stabilization at a specified center between 2012 and 2021, were retrospectively reviewed. 21 QA and 22 HA patients were 52.4% of males and 47.6% females with a median age of 25 years (range 12-58) in the QA group, while 63.6% were females with a median age of 21 years (range 14-58) in the HA group. The mean follow-up period was 46.9 months (range 24-77) in QA and 61 months (range 24-100) in the HA group. At the final follow-up, no complications were observed with either technique. No patients presented with recurrent dislocations after surgery. There was no statistically significant difference in postoperative mean Kujala scores (QA = 94.9+/- 4.1 and HA = 94.2+/- 8.0, p = 0.73) or the mean Lysholm scores (QA = 94.1+/- 5.0 and HA = 93.2+/- 7.0, p = 0.61).

Medial Patellofemoral Ligament Tear Associated with an Intra-articular Axial Spilt Osteochondral Fracture of the Lateral Femoral Condyle: a "Knee Trap-door" Fracture

Introduction

Medial patellofemoral ligament (MPFL) prevents lateral dislocation of the patella and acts as a major stabilizer. The tear could be associated with osteochondral avulsion fractures; however, intra-articular split fractures are not seen. Here, we present one unusual case of such a presentation.

Case Report

A 16-year-old male presented with a history of recurrent patellar dislocation and inability to bear weight following the last episode. The patient was diagnosed with an MPFL tear with an unusual intra-articular femoral condyle split fracture. The case had significant improvement in functional scores post-surgery.

Conclusion

In physically active populations, twisting of the knee could result in an MPFL tear, leading to recurrent patellar dislocation. The treatment remains ligament reconstruction, open, or arthroscopic. Associated intra-articular fractures are very rare with such injuries and need to be addressed due to the high rate of non-union.

Is Patellar Instability a Contraindication to Semiextended Tibial Nailing?: A Case Report

CASE

We report a 40-year-old woman with undiagnosed patellofemoral instability that worsened 8 months after intramedullary nailing of a distal left tibia fracture in the semiextended position through a partial medial parapatellar approach. Patella stability and asymptomatic knee function were restored after IM nail removal, medial patellofemoral ligament repair, and left tibial tubercle transposition.

CONCLUSION

The optimal surgical approach for tibial IM nailing in patients with chronic patellar instability has not been described. Clinicians should be cognizant of the potential for worsening patellofemoral instability in these patients when using the medial parapatellar approach in the semiextended position.

Influence of medial and lateral imaging plane inclination on assessment of trochlear depth, sulcus angle, and facet asymmetry in the setting of trochlear anatomy: a cadaveric study

PURPOSE

(1) to assess the influence of medial or lateral imaging plane inclination on the measurement of sulcus angle, trochlear depth, and facet asymmetry on transverse cross-sectional images. (2) to assess the effect of measurement level (height) on these respective parameters.

MATERIALS AND METHODS

Twenty dry femurs (9 left, 11 right) were imaged with CT. A 3D dataset was obtained from which axial images were reconstructed in the ideal plane without inclination as well as with 8° of medial and lateral inclination. Sulcus angle, trochlear depth, and facet asymmetry were measured on the 3 image sets. In addition, the measurements were performed at 5 mm and 10 mm from the superior margin of the medial trochlear facet. Statistical analysis consisted of the Wilcoxon test and calculation of measurement variation.

RESULTS

There were no statistically significant differences between the indicated measurements on the reference set compared to medial or lateral inclination. All measurements were significantly different depending on measurement height.

CONCLUSION

Medial or lateral inclination in the transverse imaging plane of 8° does not influence the values of typical parameters used for the assessment of trochlear dysplasia. The measurement height has a significant influence, and a consensus should be found as to which is the optimal measurement height.

Patient-Reported Outcomes Following Medial Patellofemoral Reconstruction With Peroneus Longus Allografts Demonstrate Good Results

Purpose

To evaluate the recurrent dislocation risk and patient-reported outcomes of peroneus longus allograft tissue for medial patellofemoral ligament (MPFL) reconstruction.

Methods

Patients who underwent MPFL reconstruction with peroneus longus allograft at an academic center between 2008 and 2016 were identified. Record review and patient contact were used to identify any cases of recurrent patellar dislocation and collect patient-reported outcomes scores (Knee injury and Osteoarthritis Outcome Score [KOOS], Norwich Patellar Instability score, Marx activity scale). Patients with 1-year minimum follow-up were included. Outcomes were quantified and the proportion of patients reaching a previously defined patient acceptable symptom state (PASS) for patellar instability was determined.

Results

Sixty-one patients (42 female and 19 male) underwent MPFL reconstruction with peroneus longus allograft during the study period. Forty-six patients (76%) with 1-year minimum follow up were contacted at a mean of 3.5 years postoperative. The mean age at time of surgery was 22 ± 7.2 years. Patient-reported outcomes data were available in 34 patients. Mean KOOS subscale scores were as follows: Symptoms 83.2 ± 19.1, Pain 85.2 ± 17.6, Activities of Daily Living 89.9 ± 14.8, Sports 75 ± 26.2, and Quality of Life 72.6 ± 25.7. The mean Norwich Patellar Instability score was 14.9% ± 17.4%. The mean Marx activity score was 6.0 ± 5.2. No recurrent dislocations were noted during the study period. Sixty-three percent of patients who underwent isolated MPFL reconstruction met PASS thresholds in at least 4 of 5 KOOS subscales.

Conclusions

The use of a peroneus longus allograft in MPFL reconstruction in conjunction with other indicated procedures results in a low re-dislocation risk and a high proportion of patients meeting PASS criteria for patient-reported outcome scores 3 to 4 years postoperatively.

Level of Evidence

IV, case series.

Posterior Approach With Small Incision Is a Safe Alternative to Anterior Approach for Hamstring Autograft Harvest in Adolescents

Background

There are potential drawbacks and complications associated with using the anterior approach to harvest the hamstring tendon as an autograft source for anterior cruciate ligament (ACL) and medial patellofemoral ligament (MPFL) reconstruction. A posterior harvest technique has been described as an alternative to an anterior approach in skeletally mature patients. The 2 approaches have not been compared in adolescents.

Purpose

We sought to compare the incision size and harvested tendon length produced by anterior and posterior hamstring harvest techniques in an adolescent population.

Methods

After obtaining consent, we prospectively collected data on a consecutive series of 115 adolescents undergoing ACL or MPFL reconstruction, including the length of the incision and of the harvested hamstring tendon. Demographic information including age, sex, and body mass index (BMI) was collected at the time of surgery.

Results

The mean age at the time of surgery was 14.3 ± 1.8 years (range: 9-21 years), and 43% (N = 50) of participants were male. Of the 115 hamstring autografts, 26 were harvested anteriorly and 89 were harvested posteriorly. Neither mean semitendinosus length nor mean gracilis length was significantly different when harvested anteriorly versus posteriorly. The posterior harvest group had a mean incision length that was significantly smaller than that of the anterior harvest group. No iatrogenic nerve injuries or neurovascular complications were observed in either group.

Conclusion

A posterior incision for hamstring autograft harvest provided an alternative approach in adolescents, which resulted in a 20% smaller incision than an anterior approach. For procedures such as MPFL reconstruction that do not require concomitant anteromedial work, posterior hamstring harvest may be used to improve cosmesis while producing viable hamstring autograft tissue for surgical reconstruction.

Synthetic graft for medial patellofemoral ligament reconstruction: a systematic review

Background

This systematic review investigates the role of synthetic graft for primary medial patellofemoral ligament (MPFL) reconstruction in patients with recurrent patellofemoral instability, focusing on clinical scores and the rate of complications.

Methods

This systematic review was conducted according to the PRISMA statement. The main online databases were accessed in January 2022 without time constraints. All clinical studies investigating the use of synthetic grafts for MPFL reconstruction were accessed. Revision settings were not considered. Only articles reporting data on patients with recurrent patellofemoral instability were eligible. Studies regarding congenital or acute patellofemoral dislocation were excluded. Only studies performing a follow-up longer than 24 months were considered.

Results

Data on 199 patients [mean age 22.3 (range 19.0–28.0) years] were collected. The mean follow-up was 60.5 (39.0–142.8) months. All the scores of interest improved at last follow-up: Kujala (+ 24.8; P = 0.0002), Lysholm (+ 42.0; P = 0.02), Tegner (+ 1.2; P = 0.03), IKDC (+ 20.9; P = 0.02). Post-operatively, a positive apprehension test was detected in 6.1% (7/115) of patients, and a sensation of instability was reported by 1.5% (3/199) of patients. The rate of re-dislocations was 2.5% (5 of 199 patients), and revision procedures were performed in less than 1% (1 of 199) of patients.

Conclusion

Synthetic graft may be reliable and feasible for primary MPFL reconstruction in patients with recurrent patellofemoral instability.

Comparable outcome for autografts and allografts in primary medial patellofemoral ligament reconstruction for patellofemoral instability: systematic review and meta-analysis

PURPOSE

This study updates the current evidence on the role of allografts versus autografts for medial patellofemoral ligament (MPFL) reconstruction in patients with patellofemoral instability.

METHODS

The study was performed according to the PRISMA guidelines. In March 2021, a literature search in the main online databases was performed. Studies reporting quantitative data concerning primary MPFL reconstruction using an allograft were considered for inclusion. The Coleman Methodology Score was used to assess the methodological quality of the selected articles.

RESULTS

Data from 12 studies (474 procedures) were retrieved. The mean follow-up was 42.2 (15-78.5) months. The mean age was 21.1 ± 6.2 years. 64.9% (285 of 439) of patients were female. At the last follow-up, the Tegner (p < 0.0001), Kujala (p = 0.002) and the Lysholm (p < 0.0001) scores were minimally greater in the autografts. The similarity was found in the rate of persistent instability sensation and revision. The allograft group evidenced a lower rate of re-dislocations (p = 0.003).

CONCLUSION

Allografts may represent a feasible alternative to traditional autograft for MPFL reconstruction in selected patients with patellofemoral instability. Allograft tendons yielded similar PROMs, rates of persistent instability, and revision. Allograft reconstructions tended to have modestly lower re-dislocation rates.

LEVEL OF EVIDENCE

IV.

The gracilis and semitendinosus muscles: a morphometric study on 18 specimens with clinical implications

INTRODUCTION

The pes anserinus consists of the sartorius, semitendinosus, and gracilis muscles. They coalesce together with the leg fascia to form the anserine plate. The semitendinosus and gracilis both form the deep layer of this plate and are clinically relevant for ligament reconstruction. The aim of the study is to report a detailed morphometric evaluation of the semitendinosus and gracilis muscles and assess their clinical implications.

METHODS

Using a rigorous dissection process on 18 cadaveric hips, measurements of both the semitendinosus and gracilis muscles with bone parameters were conducted. We measured the following: (a) total femur, femoral shaft, and neck lengths, (b) total muscle lengths, and (c) intra-muscular and extra-muscular (free) tendon lengths. Correlation values between bone variables, muscle variables, and in-between muscle variables were computed.

RESULTS

The total muscle and the distal intra-muscular tendon length of the St and Gr are correlated with the total femur length. When compared to gracilis, the total muscle and distal intra-muscular tendon lengths of the ST are much better correlated with the total femur length. The free distal tendon length for both muscles did not show a significant correlation with any of the femoral bone lengths.

CONCLUSION

The variability of tendon length of the ST/Gr poses a significant challenge to surgeons. This study reports a detailed morphometric evaluation of the ST/Gr hamstring muscle and tendons. It revealed a positive correlation between the femoral length and the ST/Gr graft lengths. This could help orthopedic surgeons in predicting the graft lengths pre-operatively and develop better planning for reconstructive surgeries.

Results and Factors Affecting Clinical Efficacy of Medial Patellofemoral Ligament Reconstruction Using a Gracilis Tendon Suture Technique

Background

This study evaluated the outcomes of medial patellofemoral ligament (MPFL) reconstruction using a gracilis tendon suture technique for patients with patellar instability. Potential factors affecting clinical efficacy were also evaluated.

Methods

This study included 22 patients diagnosed with patellar instability, who underwent MPFL reconstruction using a gracilis tendon. Their mean age was 21.5 years (range, 15–48 years), and the mean follow-up period was 26.8 months (range, 12–66 months). Clinical evaluation included the determination of Kujala, Lysholm, and Tegner scores. Radiographic evaluation included changes in congruence angle and arthritic changes in the patellofemoral joint. Additionally, patients were examined for any complications, including recurrent dislocation. Factors affecting clinical efficacy were also evaluated.

Results

All clinical scores improved at final follow-up. The mean congruence angle improved from 23.6° before surgery to –6.5° at final follow-up. Two of 15 patients developed osteoarthritic changes in the patellofemoral joint. Dislocation recurred in 2 patients with type C trochlear dysplasia, which showed a statistically significant association with recurrent dislocation when compared to type A and B dysplasia (p = 0.026). Kujala scores were significantly lower among patients with abnormal patellar tilts (p = 0.038), and Lysholm scores were significantly lower among patients with femoral internal rotation deformity (p = 0.024).

Conclusions

Satisfactory results were obtained after MPFL reconstruction using a gracilis tendon suture technique for patients with patellar instability. However, dislocation recurred in patients with type C trochlear dysplasia, and clinical efficacy was lower among patients with femoral internal rotation and patellar tilt.

Medial patellofemoral ligament is a part of the vastus medialis obliquus and vastus intermedius aponeuroses attaching to the medial epicondyle

PURPOSE

This study aimed to investigate the bony surface characteristic of the femoral attachment of the medial patellofemoral ligament (MPFL) and the correlation between the relevant layered structures, including muscular aponeurosis and the joint capsule, which contribute to patellofemoral joint (PFJ) stability.

METHODS

The morphology of the medial aspect of the medial condyle using micro-computed tomography and analysed cortical bone thickening in 24 knees was observed. For the macroscopic and histological analyses, 21 and 3 knees were allocated, respectively. The Kruskal-Wallis one-way analysis of variance test with Dunn post hoc testing was performed for statistical analysis.

RESULTS

At the level of the adductor tubercle, there were no significant differences in cortical bone thickness. At the level of the medial epicondyle (MEC), cortical bone thickness was considerably greater than that in other areas of the medial condyle (mean ± standard deviation, 0.60 ± 0.20 mm; p < 0.0001). Macroscopic analysis revealed that the deep aponeurosis of the vastus medialis obliquus and the tendinous arch of the vastus intermedius distally formed the composite membrane and adjoined to the joint capsule to firmly attach to MEC, which was located at 41.3 ± 5.7 mm posterior and 14.2 ± 3.1 mm superior to the joint cartilage. Histological analysis showed a composite membrane and adjoining capsule attached to MEC via fibrocartilage.

CONCLUSION

MPFL could be interpreted as part of the deep aponeurosis of the vastus medialis obliquus (VMO) and the tendinous arch of the vastus intermedius, which combined with the joint capsule to attach to MEC. The cortical bone thickening indicated that the tensile stresses were loaded on MEC in aged cadavers. Involvement of VMO and vastus intermedius aponeuroses in restored graft of MPFL could utilise the dynamic stability of surrounding muscles to mimic a native structure.

Biomechanical comparison of two medial patellofemoral ligament reconstruction techniques: Quadriceps tendon fixation versus single-tunnel patella fixation with gracilis autograft did not differ in load to failure and stiffness

BACKGROUND

The purpose of this study was to evaluate the ultimate failure load and stiffness of two patellar fixation techniques for medial patellofemoral ligament (MPFL) reconstruction: (1) quadriceps tendon fixation (QT), (2) single tunnel (STG) patella fixation with gracilis autograft.

METHODS

A total of 16 fresh-frozen cadaveric knees (eight matched pairs) were randomized into two groups (QT vs. STG). The MPFL reconstructions were subjected to cyclic loading for 10 cycles to 30 N and then tested to failure at a constant displacement rate of 15 mm/min using a materials-testing machine (MTS 810 Universal Testing System). Failure mode, ultimate failure load and stiffness were recorded for each cadaveric specimen.

RESULTS

There was no significant difference in mean ultimate failure load among groups (P = 0.35). The STG group failed at a mean ultimate load of 190.04 N [standard deviation (SD) 23.18] and the QT group failed at 206.24 N (SD 37.99). The STG group had a mean stiffness of 21.38 N/mm (SD 1.44). This was not significantly higher than the mean stiffness value achieved for the QT group at 20.36 N/mm (SD 1.3) (P = 0.19). In the QT group all reconstructions failed due to tendon rupture at the patella attachment. The reason for failure in the STG group was the graft-suture connection.

CONCLUSIONS

This cadaver study showed no statistically significant difference in biomechanical performance of the evaluated patella fixation techniques, in terms of maximum load to failure and stiffness. Both techniques are reliable in terms of biomechanical properties and could offer additional surgical solutions.

Ability of Medial Patellofemoral Ligament Reconstruction to Overcome Lateral Patellar Motion in the Presence of Trochlear Flattening: A Cadaveric Biomechanical Study

BACKGROUND

Medial patellofemoral ligament (MPFL) reconstruction is an established operative procedure to restore medial restraining force in patients with patellar instability. In the setting of a shallow sulcus, it is unclear whether an isolated MPFL reconstruction is sufficient to restore patellofemoral stability.

HYPOTHESIS

Progressively increasing the sulcus angle would have an adverse effect on the ability of an MPFL reconstruction to restrain lateral patellar motion.

STUDY DESIGN

Controlled laboratory study.

METHODS

Seven fresh-frozen human cadaveric knees were harvested and prepared for experimentation. Each specimen was run through the following test conditions: native, lateral retinacular release, lateral retinacular repair, MPFL release, MPFL reconstruction, and MPFL reconstruction with trochlear flattening. Four 3-dimensional printed wedges (10°, 20°, 30°, and 40°) were created to insert beneath the native trochlea to raise the sulcus angle incrementally and simulate progressive trochlear flattening. For each test condition, the knee was positioned at 0°, 15°, 30°, and 45° of flexion, and the force required to displace the patella 1 cm laterally at 10 mm/s was measured. Group comparisons were made with repeated measures analysis of variance.

RESULTS

In the setting of an MPFL reconstruction, as the trochlear groove was incrementally flattened, the force required to laterally displace the patella progressively decreased. A 10° increase in the sulcus angle significantly reduced the force at 15° (P = .01) and 30° (P = .03) of knee flexion. The force required to laterally displace the patella was also significantly lower at all knee flexion angles after the addition of the 20°, 30°, and 40° wedges (P≤ .05). Specifically, a 20° increase in the sulcus angle reduced the force by 29% to 36%; a 30° increase, by 35% to 43%; and a 40° increase, by 40% to 47%.

CONCLUSION

Despite an MPFL reconstruction, the force required to laterally displace the patella decreased as the sulcus angle was increased in our cadaveric model.

CLINICAL RELEVANCE

An isolated MPFL reconstruction may not be sufficient to restore patellar stability in the setting of a shallow or flat trochlea. Patients with an abnormal sulcus angle may have recurrent instability postoperatively if treated with an isolated MPFL reconstruction.

Biomechanical evaluation of three patellar fixation techniques for MPFL reconstruction: Load to failure did not differ but interference screw stabilization was stiffer than suture anchor and suture-knot fixation

PURPOSE

The purpose of this study was to compare the maximum load to failure and stiffness of three medial patella-femoral ligament (MPFL) reconstruction techniques: (i) suture anchor fixation (SA), (ii) interference screw fixation (SF), and (iii) suture knot (SK) patellar fixation. The null hypothesis was that the comparison between these three different patella fixation techniques would show no difference in the ultimate failure load and stiffness.

METHODS

Reconstruction of the MPFL with gracilis tendon autograft was performed in 12 pairs of fresh-frozen cadaveric knees (24 knees total; mean age, 63.6 [Formula: see text] 8.0 years). The specimens were randomly distributed into 3 groups of 8 specimens; SA reconstruction was completed with two 3.0-mm metal suture anchors; (SF) fixation was accomplished by two 6-mm bio-composite interference screws; SK fixation at the lateral side of the patella was accomplished after drilling two semi-patellar tunnels with a diameter of 4.5 mm. The reconstructions were subjected to cyclic loading for 10 cycles to 30 N and tested to failure at a constant displacement rate of 15 mm/min using a materials-testing machine (MTS 810 Universal Testing System). The final load of failure (N), stiffness (N / mm) and failure mode was recorded in each specimen and followed by statistical analysis.

RESULTS

There was no significant difference in mean ultimate failure load among the three groups. The SK group failed at a mean ([Formula: see text] SD) ultimate load of 253.5 [Formula: see text] 38.2 N, the SA group failed at 243 [Formula: see text] 41.9 N and the SF group at 263.2 [Formula: see text] 9.06 N. The SF group had a mean stiffness of 37.8 [Formula: see text] 5.7 N/mm. This was significantly higher (p < 0.05) than the mean stiffness value achieved for the SK group 21.4 [Formula: see text] 9.5 N/mm and the SA group 18.7 [Formula: see text] 3.4 N/mm. The most common mode of failure in the SA group was anchor pullout, and in the SK group was failure at the graft-suture interface. All the reconstructions in the SF group failed due to tendon graft slippage from the tunnel.

CONCLUSION

Load to failure was not significantly different between the 3 techniques. However, screw fixation was found to be significantly stronger than the anchor and the suture knot fixation in terms of rigidity of the reconstruction. From a clinical point of view, all methods of fixation can be used reliably for MPFL reconstruction, since they were found to be stronger than the native MPFL.

Patella dislocation: an overview

Patella dislocation is one of the most common knee injuries, accounting for 3% of acute knee injuries. Despite its prevalence, patella dislocation is often missed, with a haemarthrosis often the only sign, albeit a non-specific one. A thorough history and examination are necessary to identify patella dislocation and its potential causes. Investigations should include cross-sectional imaging to evaluate both osseous and soft tissue structures in order to guide management. Management in the acute setting is normally non-operative, but damage to structural supports, osteochondral defects or recurrent dislocation should prompt consideration of operative treatment. Operative treatment should address the soft tissue stabilisers and/or osseus deformities that predispose to, or occur secondary to, patella dislocation.

Gracilis and semitendinosus moment arm decreased by fascial tissue release after hamstring harvesting surgery: a key parameter to understand the peak torque obtained to a shallow angle of the knee

PURPOSE

Semitendinosus and gracilis muscles whose tendons are used in surgical reconstruction of the anterior cruciate ligament maintain their contractile ability, but the peak torque angle of hamstring muscles shifted to a shallow angle postoperatively. The goal was to quantify the influence of the myofascial structures on instantaneous moment arms of knee muscles to attempt explaining the above-mentioned post-surgical observations.

METHODS

Hamstring harvesting procedures were performed by a senior orthopaedic surgeon on seven lower limbs from fresh-frozen specimens. Femoro-tibial kinematics and tendons excursion were simultaneously recorded at each step of the surgery.

RESULTS

No significant difference was demonstrated for instantaneous moment arm of gracilis during anterior cruciate ligament surgery (84% of the maximum intact values; P ≥ 0.05). The first significant semitendinosus moment arm decrease was observed after tendon harvesting (61% of the maximum intact values; p ≤ 0.005). After hamstring harvesting, the maximum and minimum moment arm (both gracilis and semi tendinosus) shifted to a shallow angle and 90°, respectively.

CONCLUSION

Moment arm modifications by paratenons and the loose connective tissue release are essential to understand the peak torque obtained to a shallow angle.

LEVEL OF EVIDENCE

Basic science study, biomechanics.

Injuries in functional fitness: an updated systematic review

INTRODUCTION

This study aimed to analyze injuries of functional fitness participants through a systematic review.

EVIDENCE ACQUISITION

A systematic search of the literature was conducted in CINAHL, EMBASE, PEDro, PubMed, SCOPUS, SPORTDiscus, and Web of Science, supplemented by searching in the grey literature, from 2017 to November 2020. This systematic review followed the PRISMA guidelines and was documented in the PROSPERO registry (CRD42020201259). Two reviewers independently extracted data including methodological (age, sex, time of practice, location, period, time frame, and completion rate) and injury (definition, diagnosis, prevalence, incidence, severity, mechanism, type, location, risk factors, and treatment) variables, as well as assessing study quality and risk of bias.

EVIDENCE SYNTHESIS

Twenty-six studies were included (10967, range 6-3049, participants). Injury was defined fairly differently across studies. The majority of studies used a retrospective study design and the main variables reported were prevalence, body location, and associated factors of injuries. The mean prevalence of musculoskeletal injuries was 32.8%, ranging from 2.4 to 60.6%, and the injury incidence per 1000 hours ranged from 0.21 to 67 36. The most affected body location in the studies was the shoulder, followed by lumbar spine, and knee. Muscle, joint, and ligament/tendon injuries were the most frequently reported. The majority of studies were of moderate methodological quality. All studies were considered as high risk of bias.

CONCLUSIONS

This review broadened the scope of 75 previous reviews on injuries in functional fitness. There have been few investigations regarding severity, mechanism, and treatment of injuries, so further research is warranted.

Patellar Fixation With Suspensory Fixation Device in Single-Tunnel Medial Patellofemoral Ligament Reconstruction

The medial patellofemoral ligament (MPFL) is the primary soft-tissue stabilizer of the patellofemoral joint. Among the patellofemoral instability surgery options, MPFL reconstruction is the most preferred soft-tissue procedure. There is no gold-standard surgical treatment method in MPFL reconstruction, and many surgical methods have been described. We describe our surgical technique for MPFL reconstruction wherein the semitendinosus autograft is fixed to a single tunnel opened in the patella with a suspensory fixation device and only a single interference screw on the femoral side.

Isolated MPTL reconstruction fails to restore lateral patellar stability when compared to MPFL reconstruction

PURPOSE

To biomechanically evaluate MPTL reconstruction and compare it with two techniques for MPFL reconstruction in regard to changes in patellofemoral contact pressures and restoration of patellar stability.

METHODS

This is an experimental laboratory study in eight human cadaveric knees. None had patellofemoral cartilage lesions or trochlear dysplasia as evaluated by conventional radiographs and MRI examinations. The specimens were secured in a testing apparatus, and the quadriceps was tensioned in line with the femoral shaft. Contact pressures were measured using the TekScan sensor at 30°, 60° and 90°. The sensor was placed in the patellofemoral joint through a proximal approach between femoral shaft and quadriceps tendon to not violate the medial and lateral patellofemoral complex. TekScan data were analysed to determine mean contact pressures on the medial and lateral patellar facets. Patellar lateral displacement was evaluated with the knee positioned at 30° of flexion and 9 N of quadriceps load, then a lateral force of 22 N was applied. The same protocol was used for each condition: native, medial patellofemoral complex lesion, medial patellofemoral ligament reconstruction (MPFL-R) using gracilis tendon, MPFL-R using quadriceps tendon transfer, and medial patellotibial ligament reconstruction (MPTL-R) using patellar tendon transfer.

RESULTS

No statistical differences were found for mean and peak contact pressures, medial or lateral, among all three techniques. However, while both techniques of MPFL-R were able to restore the medial restraint, MPTL-R failed to restore resistance to lateral patellar translation to the native state (mean lateralization of the patella [mm]: native: 9.4; lesion: 22; gracilis MPFL-R: 8.1; quadriceps MPFL-R: 11.3; MPTL-R: 23.4 (p < 0.001).

CONCLUSION

MPTL-R and both techniques for MPFL-R did not increase patellofemoral contact pressures; however, MPTL-R failed to provide a sufficient restraint against lateral patellar translation lateral translation in 30° of flexion. It, therefore, cannot be recommended as an isolated procedure for the treatment of patellar instability.

Studies of the criteria for determining optimal location of medial patellofemoral ligament attachment sites

Identifying appropriate attachment sites is important in the planning of medial patellofemoral ligament (MPFL) reconstruction. Two criteria are advanced to describe normal MPFL function, namely isometric criterion and desired pattern criterion. Subsequently, computational methods have applied these criteria to determine optimal attachment sites. So far, there is no study that compares the outcomes of these two criteria. For five subjects' 3D models of the patella and femur, three patellar sites and many femoral sites were identified as pairs of candidate attachment sites. For each patellar site, the criteria were applied to identify the matching femoral sites that satisfy them. The matching femoral site with the smallest length change was identified as the optimal femoral site. The desired pattern criterion finds fewer matching sites compared to the isometric criterion. In contrast, the isometric criterion can always find matching sites. The optimal femoral sites obtained vary significantly across different subjects. For most subjects, the optimal sites obtained using the isometric criterion are closer to known anatomical sites than those obtained using the desired pattern criterion. This study reaffirms that MPFL reconstruction is subject specific. The isometric criterion may be more reliable than the desired pattern criterion for determining optimal attachment sites. Graphical Abstract. Highlight of the paper. The location of the patella site significantly affects the location of the optimal femoral site. The isometric criterion option 1, with length at 0° regarded as MPFL's natural length, may be more reliable than other criteria or options for the planning of MPFL surgery because the optimal sites that it finds are closest to known anatomical sites.ᅟ.

Reconstruction of the medial patellofemoral ligament using two blind transverse semi-patella tunnels and an implant-free technique for patellar fixation: a technical note

Background

The double-bundle technique with two points of patellar fixation in the upper half of the patella replicating the broad attachment site of the native medial patellofemoral ligament (MPFL) is the most commonly performed procedure for MPFL reconstruction. Complete transverse patella tunnels pose a threat to the integrity of the patella. We present an implant-free, double-bundle technique for MPFL reconstruction with gracilis autograft, overcoming the problem of complete patella bone tunnels and over-drilling.

Methods

After standard gracilis graft harvesting, the anteromedial side of the patella is exposed. With the guidance of an anterior-cruciate-ligament (ACL) tibia-aiming device, two 2-mm parallel guide pins are inserted from medial to lateral at the upper half of the patella. The two guide pins are over-drilled with a cannulated 4.5-mm drill bit 2-cm deep, to create two transverse blind semi-patellar tunnels. For the femoral fixation, a 2.4-mm guide pin with an eyelet is drilled at the Schöttle point and over-reamed with a 6-mm cannulated reamer to a depth of 30 mm. The two free ends of the graft (with two running Krakow sutures placed) are pulled into the two patella tunnels and the graft sutures are tied together with tension for stable graft fixation at the lateral patella rim. With the help of a femoral suture loop (which is inserted in the femoral bone tunnel), the graft-loop is advanced into the femoral bone tunnel and the graft is finally fixed with a 7-mm interference screw at 30° of knee flexion.

Results

The utilization of blind transverse tunnels (not trans-patellar tunnels) offers the advantage of avoiding stress risers at the patella. Thanks to the ACL tibia aiming device, multiple drilling, and breaching of the anterior patellar cortex or articular surface of the patella is avoided.

Conclusions

This implant-free, and consequently affordable technique, isolated or combined with bony procedures, minimizes possibilities for perioperative bony complications at the patella fixation site.

Postoperative Knee and Shoulder

Arthroscopic surgery in the knee most commonly addresses ligament, meniscal, or articular cartilage abnormalities. Similarly, arthroscopic surgery of the shoulder most commonly addresses tendon and labral abnormalities. The expected postoperative MRI findings depend on both the procedure performed and the time since surgery. Identifying complications and failed procedures relies on both clinical and imaging evaluations.

Midterm Results after Implant-Free Patellar Fixation Technique for Medial Patellofemoral Ligament Reconstruction

Problems and complications concerning the patellar fixation in medial patellofemoral ligament reconstruction (MPFLR) have been reported. The purpose of this retrospective study was to systematically analyze the surgical technique for MPFLR with a V: -shaped patellar bonetunnel for implant-free fixation of an autologous gracilis tendon, allowing early functional rehabilitation, regarding restoration of the patellofemoral stability, patient satisfaction, return to sports, and technique-specific complications. In 2010, 128 cases of consecutive isolated MPFLR were performed. All these cases were included. After a minimum follow-up of 3 years, 104 cases were retrospectively analyzed (follow-up: 81.3%) with regard to redislocation, subjective functional outcome (Tegner's score and sports level compared with preoperative level), patient satisfaction, revision surgery, and technique-specific complications. After a follow-up of 45.7 ± 3.2 months, 101 of 104 cases (97.1%) showed no redislocation. Mean Tegner's score was 5.1 ± 1.8 (range, 2-9). A total of 61.5% patients reported about a higher sports level compared with their preoperative level. The patient satisfaction was high with 94.2%. In two cases (1.9%), technique-specific problems occurred as the bone bridge of the V: -shaped tunnel was insufficient due to a malpositioning of the aiming device. No further technique-specific problems occurred and no revision surgery was necessary during the observational period. The presented surgical technique is safe and it reliably restores the patellofemoral stability, with a low rate of redislocations, an excellent subjective functional outcome, and a high-patient-reported satisfaction. No major technique-specific complications occurred.

Comparison of Clinical and Radiological Outcomes Between Transosseous Tunnel and Suture Anchor Patellar Fixation for Medial Patellofemoral Ligament Reconstruction: A Cohort Study With 2-Year Follow-up

BACKGROUND

Several surgical methods have been developed for medial patellofemoral ligament reconstruction (MPFLR). However, the question of which patellar fixation method, suture anchor (SA) or transosseous tunnel (TO) fixation, achieves better overall outcomes remains to be answered.

HYPOTHESIS

SA patellar fixation will present comparable clinical outcomes and a lower complication rate compared with TO patellar fixation for MPFLR.

STUDY DESIGN

Cohort study; Level of evidence, 3.

METHODS

We retrospectively reviewed the outcomes of 46 patients who underwent MPFLR with either TO fixation (n = 21; mean age, 24.4 ± 6.1 years) or SA fixation (n = 25; mean age, 24.1 ± 12.1 years) for the treatment of recurrent patellar dislocation. Clinical findings (International Knee Documentation Committee [IKDC] subjective score, Lysholm score, and Tegner activity score), radiological findings (congruence angle and patellar tilt angle), and complications (redislocation, patellar fracture, patellofemoral osteoarthritis progression, infection, and stiffness) were compared between the TO and SA groups at the 2-year follow-up visit.

RESULTS

The mean postoperative IKDC subjective and Lysholm scores did not differ significantly between groups. However, postoperative Tegner activity scores were significantly higher in the TO group than in the SA group (TO, 5.8 ± 1.4; SA, 4.9 ± 1.2; P = .012). Congruence angle did not differ significantly between the groups (TO, -3.2 ± 22.8; SA, -7.6 ± 17.8; P = .464). Patellar tilt angle was lower in the TO group than in the SA group (TO, 10.5 ± 5.4; SA, 13.7 ± 2.8; P = .015). During the follow-up period, the TO group had 1 redislocation and 2 patellar fractures, whereas the SA group had no redislocations or fractures. Patellofemoral osteoarthritis progression was significantly higher in the TO group than in the SA group at the 2-year follow-up visit (TO, 9/21; SA, 2/25; P = .006).

CONCLUSION

Both TO and SA patellar fixation methods for MPFLR showed improved clinical outcomes. When compared with TO fixation, SA fixation presented comparable clinical outcomes and a lower complication rate.

Graft choice for isolated MPFL reconstruction: gracilis versus semitendinosus

INTRODUCTION

After the first patellar dislocation, most patients report damage of the medio-patellofemoral ligament (MPFL) and surgical reconstruction is required. The purpose of this study is to systematically review current evidence and to clarify the role of the gracilis and semitendinosus tendons as graft for isolated MPFL reconstruction.

MATERIALS AND METHODS

The present systematic review was conducted according to the PRISMA guidelines. The literature search was conducted in October 2019. All clinical trials using the semitendinosus and/or gracilis tendon grafts for isolated MPFL reconstruction in patients with patellofemoral instability were considered for inclusion. Only articles reporting a minimum of 12-month follow-up were considered. The PEDro score was used for the methodological quality assessment.

RESULTS

Data from 1491 procedures were collected. The mean follow-up was 36.12 months. There was comparability among the patient baseline. All the scores of interests (Kujala, Tegner, Lysholm) and range of motion scored better in the semitendinosus group. Moreover, in favour of the semitendinosus group, a statistically significant reduction of the revision surgeries and re-dislocations were evidenced. Apprehension test and persistent instability sensation found any statistical correlations.

CONCLUSION

Isolated MPFL reconstruction through semitendinosus tendon graft performed better than the gracilis in selected patients suffering from recurrent patellofemoral instability.

An Updated Overview of the Anatomy and Function of the Proximal Medial Patellar Restraints (Medial Patellofemoral Ligament and the Medial Quadriceps Tendon Femoral Ligament)

The medial patellofemoral ligament (MPFL) has been widely accepted to function as "the primary static restraint to lateral patellar displacement." However, current growing evidence suggests that there is a complex of medial patellofemoral/tibial ligaments, both proximal [MPFL, and medial quadriceps tendon femoral ligament (MQTFL)], and distal (medial patellotibial ligament and the medial patellomeniscal ligament) which restrain lateral patellar translation at different degrees of knee flexion. Specifically, the MQTFL has gained popularity over the last decade because of pure soft tissue attachments into the extensor mechanism that allow for avoidance of drilling tunnels into the patella during reconstruction. The purpose of this article was to report on the current knowledge (anatomy, biomechanics, diagnosis, indications for surgery, and techniques) on the proximal medial patellar restraints, namely the MPFL and the MQTFL, collectively referred to as the proximal medial patellar restraints.

Primary Medial Patellofemoral Ligament Repair Versus Reconstruction: Rates and Risk Factors for Instability Recurrence in a Young, Active Patient Population

PURPOSE

To comparatively evaluate the clinical outcomes and rates of recurrent instability in young patients with primary medial patellofemoral ligament (MPFL) repair or reconstruction, as well as to assess for radiologic risk factors for worse outcomes.

METHODS

A retrospective review identified all patients with lateral patellar instability who underwent either MPFL repair and/or imbrication or MPFL reconstruction without any additional osseous procedures between 2008 and 2015 at a single center. Demographic variables and preoperative magnetic resonance imaging were analyzed, and Kujala scores were obtained at a minimum 2-year follow-up. Risk factors for worse outcomes were assessed, including the Caton-Deschamps Index (CDI) Insall-Salvati Index, tibial tubercle-trochlear groove distance, and tibial tubercle-posterior cruciate ligament distance.

RESULTS

We identified 51 knees with isolated MPFL surgery (reconstruction in 32 and imbrication and/or repair in 19) at a mean of 59.7 months' follow-up (range, 24-121 months). The overall rate of recurrent dislocations was significantly greater in the repair group (36.9%) versus the reconstruction group (6.3%, P = .01), despite the average CDI being significantly higher in the reconstruction group (1.34 vs 1.23 in repair group, P = .04). No significant difference in the rate of return to baseline activity was found between the groups (77.8% in reconstruction group vs 70% in repair group, P = .62). The average Kujala score showed no significant difference between the repair and reconstruction groups (84.15 ± 14.2 vs 84.83 ± 14.38, P = .72). No imaging measurements were found to be predictive of a worse postoperative Kujala score; however, the average CDI among the MPFL repair failures (1.30 ± 0.05) was significantly higher than among the MPFL repair nonfailures (1.18 ± 0.12, P = .03).

CONCLUSIONS

MPFL reconstruction may provide improved midterm clinical outcomes and a decreased recurrence rate compared with MPFL repair. Increased patellar height as measured by the CDI may be a risk factor for recurrent patellar instability in patients who undergo isolated MPFL repair.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Autograft vs Allograft Comparison in Pediatric Medial Patellofemoral Ligament Reconstruction

Background: Patella instability and medial patellofemoral ligament (MPFL) injury are frequently encountered in pediatric patients. MPFL reconstruction is often chosen to treat this condition with good results; however, no consensus has been reached about which graft or technique to use. The purpose of this study was to evaluate the differences in graft survivorship, clinical outcomes (assessed with Kujala scores), and cost between autograft and allograft usage in MPFL reconstruction in pediatric patients. Methods: In this retrospective review of patients who underwent MPFL reconstruction between 2012-2015, autograft gracilis tendon was used for Group 1, and allograft gracilis tendon was used for Group 2. Outcomes were graft survivorship, postoperative Kujala scores, operative time, costs, graft size, and tibial tubercle-trochlear groove distance. Results: Fifty-six patients were included in this study, 21 in Group 1 and 35 in Group 2. No differences in age, sex, or chronicity were seen between the groups. Patients in Group 1 had longer operative times (134.5 minutes vs 97.3 minutes, P=0.0002), higher rates of graft failure (28.6% vs 0%, P=0.0037), and lower Kujala scores (80.3 vs 92.1, P=0.0032) compared to Group 2. All graft failures occurred in patients with chronic patella dislocations and occurred an average of 13.8 months postoperatively. Overall, autograft was costlier than allograft because of the cost of reoperation. Conclusion: This study supports the use of allograft for chronic patellar instability because of improved graft survivorship and clinical outcome scores, as well as the lower cost and reoperation rate.

Knee Flexion Angle During Graft Fixation for Medial Patellofemoral Ligament Reconstruction: A Systematic Review of Outcomes and Complications

PURPOSE

To determine the effect of knee flexion angle during graft fixation on outcomes and complications following medial patellofemoral ligament (MPFL) reconstruction.

METHODS

Three databases (PubMed, EMBASE, and MEDLINE) were searched from database inception to January 2018. After screening based on inclusion and exclusion criteria, patient demographics, fixation technique, graft selection, outcomes, and complications were extracted from the included studies. The studies were grouped based on flexion angle used during graft fixation: low (0°-30°) and high (45°-90°) flexion angle group. Methodological Index for Non-Randomized Studies criteria were used to assess the quality of each included study. Descriptive statistics are presented.

RESULTS

Seventeen studies (of 3,399) were included and were either cohort (n = 1) or case series (n = 17) study designs. A total of 556 patients with a mean age of 23.6 years (range, 10-60 years) underwent MPFL reconstructions, with 458 patients in the 0° to 30° fixation group and 98 in the 45° to 90° fixation group. The mean Kujala score improved from 45 to 72.9 (365 patients) preoperatively to 83 to 94.5 (460 patients) postoperatively for the 0° to 30° fixation group and from 53.3 to 72 preoperatively to 92.2 to 95.2 postoperatively for the 45° to 90° fixation group (98 patients).

CONCLUSIONS

The knee flexion angle during MPFL graft fixation ranges from 20° to 90°. Graft fixation at low and high knee flexion angles during MPFL reconstruction showed excellent patient-reported outcomes and low patellar redislocation rates overall, with no clear differences between the 2 groups based on the currently available data.

LEVEL OF EVIDENCE

Level IV, systematic review of Level III-IV studies.

A polygon-shaped complex appearance of medial patellofemoral ligament with dynamic functional insertion based on an outside-in and inside-out dissection technique

PURPOSE

To describe the unclarified characteristics of medial patellofemoral ligament and its relation to neighboring structures.

METHODS

Sixteen fresh-frozen human knees were dissected in using outside-in and inside-out combined technique. The patellar side attachment was observed from the inside view and femoral side from outside view.

RESULTS

The medial patellofemoral ligament was described a complex and multiconnected structure. The femoral side included the upper and lower portion, of which the upper portion attached on the femur with mean width 7.5 ± 1.1 mm and its superficial fibers extended to the adductor magnus tendon and the medial gastrocnemius tendon, and of which the lower portion appeared a right-triangle connected to the MCL without bony attachment. From inside view, the patellar attachment consisted of the bony and non-bony parts. The width of bony attachment was measured mean 16.3 ± 3.8 mm, and the non-bony attachment was found attached on the vastus intermedius tendon with mean width 21.7 ± 4.8 mm. The average thickness was 0.4 ± 0.1 mm and the length were inside assessed mean 67.9 ± 6.1 mm.

CONCLUSION

The medial patellofemoral ligament which dissected a complicated structure with bony and non-bony attachment and multi-connected to neighboring structures on both patella and femur side appears as a polygon-shaped complex structure.

Medial Patellofemoral Ligament Reconstruction Using All-Soft Suture Anchors for Patellar Fixation

The medial patellofemoral ligament (MPFL), which is critical for both patellar stability and normal kinematics of the patellofemoral joint, is disrupted in most patellar dislocations. Consequently, MPFL reconstruction is advocated in recurrent dislocations to restore native patellar constraints. Fixation of the MPFL graft to the medial border of the patella can be achieved through various methods, each with its own benefits and drawbacks. We present a technique for MPFL fixation to the patella using all-soft suture anchors, theoretically decreasing the risk of patellar fracture and articular surface violation.

Mechanical Analysis of Extra-Articular Knee Ligaments. Part One: Native knee ligaments

BACKGROUND

The aim of this study was to provide a characterization of the tensile properties of the medial collateral ligament (MCL), lateral collateral ligament (LCL), anterolateral ligament (ALL) and medial patellofemoral ligament (MPFL). Our hypothesis was that extra-articular knee ligaments are heterogeneous in nature and possess distinct material properties.

METHODS

MCL (n=12), LCL (n=11), MPFL (n=12) and ALL (n=19) samples from fresh frozen human cadaveric knees were subjected to uniaxial tensile testing to failure and analyzed for their material properties. The elastic modulus (slope of the linear portion of the stress/strain curve), ultimate stress (stress at failure), ultimate strain (strain at failure) and strain energy density (area under the stress/strain curve) were calculated.

RESULTS

The MCL had the highest elastic modulus (441.8±117.2MPa) and was significantly greater than the MPFL (294.6±190.4MPa) and LCL (289.0±159.7MPa) (P<0.05) as well as the ALL (173.7±91.8MPa) (P<0.001). The ultimate stress was significantly higher (P<0.05) for the LCL (83.6±38.1MPa) and MCL (72.4±20.7MPa), relative to the MPFL (49.1±31.0MPa) and ALL (46.4±20.1MPa). The ultimate strain of the LCL (41.0±9.9%) and ALL (37.8±7.9%) were significantly higher (P<0.05) compared to the MCL (22.9±2.5%) and MPFL (22.2±5.6%). The strain energy density of the LCL (15.2±6.4MPa) was significantly greater (P<0.05) than all other ligaments (ALL 7.8±3.1MPa, MCL 7.5±2.9MPa and MPFL 5.0±2.9MPa).

CONCLUSIONS

Extra-articular knee ligaments are a heterogeneous group with respect to material characteristics. Each ligament has tensile properties that are significantly different from others and treatment strategies should take these findings into account.

Mechanical Analysis of Extra-Articular Knee Ligaments. Part two: Tendon grafts used for knee ligament reconstruction

OBJECTIVES

The aim of this study was to provide information about the mechanical properties of grafts used for knee ligament reconstructions and to compare those results with the mechanical properties of native knee ligaments.

METHODS

Eleven cadaveric knees were dissected for the semitendinosus, gracilis, iliotibial band (ITB), quadriceps and patellar tendon. Uniaxial testing to failure was performed using a standardized method and mechanical properties (elastic modulus, ultimate stress, ultimate strain, strain energy density) were determined.

RESULTS

The elastic modulus of the gracilis tendon (1458±476MPa) (P<0.001) and the semitendinosus tendon (1036±312MPa) (P<0.05) was significantly higher than the ITB (610±171MPa), quadriceps tendon (568±194MPa), and patellar tendon (417±107MPa). In addition, the ultimate stress of the hamstring tendons (gracilis 155.0±30.7MPa and semitendinosus 120.1±30.0MPa) was significantly higher (P<0.001, respectively P<0.05), relative to the ITB (75.0±11.8MPa), quadriceps tendon (81.0±27.6MPa), and patellar tendon (76.2±25.1MPa). A significant difference (P<0.05) could be noticed between the ultimate strain of the patellar tendon (24.6±5.9%) and the hamstrings (gracilis 14.5±3.1% and semitendinosus 17.0±4.0%). No significant difference in strain energy density between the grafts was observed.

CONCLUSIONS

Material properties of common grafts used for knee ligament reconstructions often differ significantly from the original knee ligament which the graft is supposed to emulate.

Biomechanical Evaluation of Classic Solid and All-Soft Suture Anchors for Medial Patellofemoral Ligament Reconstruction

BACKGROUND

Multiple techniques for patellar fixation with classic solid suture anchors (SAs) in medial patellofemoral ligament (MPFL) reconstruction have been described. Fixation of the graft to the patella with all-soft suture anchors (ASAs) has not been studied. Purpose/Hypothesis: To evaluate the biomechanical performance of 2 different MPFL patellar fixation techniques: ASA fixation and SA fixation. We hypothesized that the ASA group would show no statistical difference in the ultimate failure load and stiffness compared with the SA group.

STUDY DESIGN

Controlled laboratory study.

METHODS

Reconstruction of the MPFL with gracilis autografts was performed in 16 fresh-frozen cadaveric knees (mean age, 52.6 ± 9.0 years). The specimens were randomly assigned to 2 groups of 8 specimens each based on the method used to fix the graft to the medial patella: ASA or SA fixation. Patellar fixation with ASAs was completed with 2 parallel 1.8-mm anchors (Q-Fix, Smith & Nephew). Fixation with SAs was completed with 2 parallel 2.9-mm anchors (Osteoraptor, Smith & Nephew). The reconstructions were cyclically loaded for 10 cycles to 25 N and then loaded in tension at 6 mm/s until failure. Ultimate failure load (N), displacement (mm), stiffness (N/mm), and mode of failure were recorded for each specimen.

RESULTS

Load to failure testing showed an ultimate failure load of 228.5 ± 53.1 N in the ASA group. In the SA group, the ultimate failure load was 156.2 ± 84.9 N. The difference between the 2 groups was not statistically significant ( P = .064). Stiffness values between the ASA and SA groups were not significantly different (21.3 ± 4.1 N/mm vs 20.9 ± 9.3 N/mm, respectively, P = .905). The most common mode of failure in both groups was anchor pullout (8 of 8 in the ASA group; 6 of 8 in the SA group).

CONCLUSION

This experimental study showed no statistically significant differences in biomechanical performance between 1.8-mm ASAs and 2.9-mm SAs.

CLINICAL RELEVANCE

Patellar fixation with 2 parallel ASAs may provide adequate patellar fixation for MPFL reconstruction, while their smaller diameter could potentially decrease the risks for patella fracture and violation of the articular surface in the cadaver model.