Mechanisms for covalent immobilization of horseradish peroxidase on ion-beam-treated polyethylene

Immobilized Horseradish Peroxidase on Enriched Diazo-Activated Silica Gel Harnessed High Biocatalytic Performance at a Steady State in Organic Solvent

Dimethyldichlorosilane (DMDCS), an efficient silane coupling reagent appearing between the -OH groups of silica gel (SG) and picric acid, instantaneously produces a derivative enriched with nitro groups. The nitro group acting as an end-cap terminates the reaction and subsequently was converted into diazo to couple tyrosine's phenol ring via its O-carbon, the inert center to immobilize horseradish peroxidase (HRP) in a multipoint mode. It maintains the status quo of the native enzyme's protein folding and the entire protein groups' chemistry. The molecular formula of the synthesized material was verified and appeared as {Si(OSi)4 (H2O)x}n{-O-Si(CH3)2-O-C6H2(N+≡N)3(HRP)}4·yH2O; the parameters were evaluated as x = 0.5, n = 1158, and y = 752. The immobilized biocatalyst's activity in organic solvents was 1.5 times better than that in an aqueous medium; it worked smoothly, wherein the activity in both solvents stabilized at six months and continued up to nine months at 63 ± 3% compared to the initial.

Attachment of Fibrinogen on Ion Beam Treated Polyurethane

Protein-stable coverage of the artificial implant is a key problem for biocompatibility. In the present study, a protein layer was attached covalently to a polyurethane surface treated by an ion beam. A plasma system consisting of a vacuum chamber (0.8 Pa pressure) with a high voltage electrode powered by a short pulse (20 μS pulse duration and 200 Hz pulse repetition) generator was designed. Polyurethane with a formulation certified as a material for medical implants was treated by nitrogen ions with an energy of 20 keV and 5 × 1014-1016 ions/cm2 fluence range. Wettability measurements, X-ray photoelectron, Raman, Fourier transform infrared attenuated total reflection, and ellipsometry spectra showed a significant change in the structure of the surface layer of the treated polyurethane. The surface of the treated polyurethane contained a carbonised layer containing condensed aromatic clusters with terminal free radicals. The surface energy of polyurethane surface increased from 33 to 65 mJ/m2. The treated polyurethane surface became capable of adsorbing and chemically binding protein (fibrinogen). The designed system for ion beam treatment can be used for surface activation of biomedical polymer devices, where a total protein coverage is required.

Foreign Body Reaction (Immune Response) for Artificial Implants Can Be Avoided: An Example of Polyurethane in Mice for 1 Week

Despite great success with artificial implants for the human body, modern implants cannot solve major health problems. The reason is an immune reaction of organisms to artificial implants, known as the foreign body reaction. We have found a way to avoid or decrease the foreign body reaction. The surface of an artificial implant is modified with condensed aromatic structures containing free radicals, which provide a covalent attachment of host proteins in a native conformation. The total protein coverage prevents the direct contact of immune cells with the implant surface, and the immune cells are not activated. As a result, the immune response of the organism is not generated, and the artificial implant is not isolated from the tissue; there is no collagen capsule, low activity of macrophages, low cell proliferation, and low inflammatory activity.

Reagent Filming for Universal Point-of-Care Diagnostics

Simplifying assays while maintaining the robustness of reagents is a challenge in diagnostics. This problem is exacerbated when translating quality diagnostic assays to developing countries that lack resources and infrastructure such as trained health workers, high-end equipment, and cold-chain systems. To solve this problem, in this study, a simple solution that films assay reagents to simplify the operation of diagnostic assays and preserve the stability of diagnostic reagents without using cold chains is presented. A polyvinyl-alcohol-based water-soluble film is used to encapsulate premeasured and premixed reagents. The reagent film, produced through a simple and scalable cast-drying process, provides a glassy inner matrix with abundant hydroxyl groups that can stabilize various reagents (ranging from chemicals to biological materials) by restricting molecular mobility and generating hydrogen bonds. The reagent film is applied to an enzymatic glucose assay, a high-sensitivity immunoassay for cardiac troponin, and a molecular assay for viral RNA detection, to test its practicability and universal applicability. The film-based assays result in excellent analytical/diagnostic performance and stable long-term reagent storage at elevated temperatures (at 25 or 37 °C, for six months), demonstrating clinical readiness. This technology advances the development and distribution of affordable high-quality diagnostics to resource-limited regions.

Effect of Spherical Elements of Biosensors and Bioreactors on the Physicochemical Properties of a Peroxidase Protein

External electromagnetic fields are known to be able to concentrate inside the construction elements of biosensors and bioreactors owing to reflection from their surface. This can lead to changes in the structure of biopolymers (such as proteins), incubated inside these elements, thus influencing their functional properties. Our present study concerned the revelation of the effect of spherical elements, commonly employed in biosensors and bioreactors, on the physicochemical properties of proteins with the example of the horseradish peroxidase (HRP) enzyme. In our experiments, a solution of HRP was incubated within a 30 cm-diameter titanium half-sphere, which was used as a model construction element. Atomic force microscopy (AFM) was employed for the single-molecule visualization of the HRP macromolecules, adsorbed from the test solution onto mica substrates in order to find out whether the incubation of the test HRP solution within the half-sphere influenced the HRP aggregation state. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) was employed in order to reveal whether the incubation of HRP solution within the half-sphere led to any changes in its secondary structure. In parallel, spectrophotometry-based estimation of the HRP enzymatic activity was performed in order to find out if the HRP active site was affected by the electromagnetic field under the conditions of our experiments. We revealed an increased aggregation of HRP after the incubation of its solution within the half-sphere in comparison with the control sample incubated far outside the half-sphere. ATR-FTIR allowed us to reveal alterations in HRP's secondary structure. Such changes in the protein structure did not affect its active site, as was confirmed by spectrophotometry. The effect of spherical elements on a protein solution should be taken into account in the development of the optimized design of biosensors and bioreactors, intended for performing processes involving proteins in biomedicine and biotechnology, including highly sensitive biosensors intended for the diagnosis of socially significant diseases in humans (including oncology, cardiovascular diseases, etc.) at early stages.

AFM study of changes in properties of horseradish peroxidase after incubation of its solution near a pyramidal structure

In our present paper, the influence of a pyramidal structure on physicochemical properties of a protein in buffer solution has been studied. The pyramidal structure employed herein was similar to those produced industrially for anechoic chambers. Pyramidal structures are also used as elements of biosensors. Herein, horseradish peroxidase (HRP) enzyme was used as a model protein. HRP macromolecules were adsorbed from their solution onto an atomically smooth mica substrate, and then visualized by atomic force microscopy (AFM). In parallel, the enzymatic activity of HRP was estimated by conventional spectrophotometry. Additionally, attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) has been employed in order to find out whether or not the protein secondary structure changes after the incubation of its solution either near the apex of a pyramid or in the center of its base. Using AFM, we have demonstrated that the incubation of the protein solution either in the vicinity of the pyramid’s apex or in the center of its base influences the physicochemical properties of the protein macromolecules. Namely, the incubation of the HRP solution in the vicinity of the top of the pyramidal structure has been shown to lead to an increase in the efficiency of the HRP adsorption onto mica. Moreover, after the incubation of the HRP solution either near the top of the pyramid or in the center of its base, the HRP macromolecules adsorb onto the mica surface predominantly in monomeric form. At that, the enzymatic activity of HRP does not change. The results of our present study are useful to be taken into account in the development of novel biosensor devices (including those for the diagnosis of cancer in humans), in which pyramidal structures are employed as sensor, noise suppression or construction elements.

Atmospheric Pressure Plasma Jet Treatment of Polymers Enables Reagent-Free Covalent Attachment of Biomolecules for Bioprinting

Three-dimensional (3D) bioprinting, where cells, hydrogels, and structural polymers can be printed layer by layer into complex designs, holds great promise for advances in medicine and the biomedical sciences. In principle, this technique enables the creation of highly patient-specific disease models and biomedical implants. However, an ability to tailor surface biocompatibility and interfacial bonding between printed components, such as polymers and hydrogels, is currently lacking. Here we demonstrate that an atmospheric pressure plasma jet (APPJ) can locally activate polymeric surfaces for the reagent-free covalent attachment of proteins and hydrogel in a single-step process at desired locations. Polyethylene and poly-ε-caprolactone were used as example polymers. Covalent attachment of the proteins and hydrogel was demonstrated by resistance to removal by rigorous sodium dodecyl sulfate washing. The immobilized protein and hydrogel layers were analyzed using Fourier transform infrared and X-ray photoelectron spectroscopy. Importantly, the APPJ surface activation also rendered the polymer surfaces mildly hydrophilic as required for optimum biocompatibility. Water contact angles were observed to be stable within a range where the conformation of biomolecules is preserved. Single and double electrode designs of APPJs were compared in their characteristics relevant to localized surface functionalization, plume length, and shape. As a proof of efficacy in a biological context, APPJ-treated polyethylene functionalized with fibronectin was used to demonstrate improvements in cell adhesion and proliferation. These results have important implications for the development of a new generation of 3D bioprinters capable of spatially patterned and tailored surface functionalization performed during the 3D printing process in situ.

Improved Multiprotein Microcontact Printing on Plasma Immersion Ion Implanted Polystyrene

Multiprotein micropatterning allows the creation of complex, controlled microenvironments for single cells that can be used for the study of the localized effects of various proteins and signals on cell survival, development, and functions. To enable analysis of cell interactions with microprinted proteins, the multiprotein micropattern must have low cross-contamination and high long-term stability in a cell culture medium. To achieve this, we employed an optimized plasma ion immersion implantation (PIII) treatment to provide polystyrene (PS) with the ability to covalently immobilize proteins on contact while retaining sufficient transparency and suitable surface properties for contact printing and retention of protein activity. The quality and long-term stability of the micropatterns on untreated and PIII treated PS were compared with those on glass using confocal microscopy. The protein micropattern on the PIII treated PS was more uniform and had a significantly higher contrast that was not affected by long-term incubation in cell culture media because the proteins were covalently bonded to PIII treated PS. The immunostaining of mouse pancreatic β cells interacting with E-cadherin and fibronectin striped surfaces showed phosphorylated paxillin concentrated on cell edges over the fibronectin stripes. This indicates that multiprotein micropatterns printed on PIII treated PS can be used for high-resolution studies of local influence on cell morphology and protein production.

Plasma-Activated Tropoelastin Functionalization of Zirconium for Improved Bone Cell Response

The mechanical strength, durability, corrosion resistance, and biocompatibility of metal alloys based on zirconium (Zr) and titanium (Ti) make them desirable materials for orthopedic implants. However, as bioinert metals, they do not actively promote bone formation and integration. Here we report a plasma coating process for improving integration of such metal implants with local bone tissue. The coating is a stable carbon-based plasma polymer layer that increased surface wettability by 28%, improved surface elasticity to the range exhibited by natural bone, and additionally covalently bound the extracellular matrix protein, tropoelastin, in an active conformation. The thus biofunctionalized material was significantly more resistant to medical-grade sterilization by steam, autoclaving or gamma-ray irradiation, retaining >60% of the adhered tropoelastin molecules and preserving full bioactivity. The interface of the coating and metal was robust so as to resist delamination during surgical insertion and in vivo deployment, and the plasma process employed was utilized to also coat the complex 3D geometries typical of orthopedic implants. Osteoblast-like osteosarcoma cells cultured on the biofunctionalized Zr surface exhibited a significant 30% increase in adhesion and up to 70% improvement in proliferation. Cells on these materials also showed significant early stage up-regulation of bone marker expression (alkaline phosphatase, 1.8 fold; osteocalcin, 1.4 fold), and sustained up-regulation of these genes (alkaline phosphatase, 1.3 fold; osteocalcin, 1.2 fold) in osteogenic conditions. In addition, alkaline phosphatase production significantly increased (2-fold) on the functionalized surfaces, whereas bone mineral deposition increased by 30% above background levels compared to bare Zr. These findings have the potential to be readily translated to the development of improved Zr and Ti-based implants for accelerated bone repair.

Design of a papain immobilized antimicrobial food package with curcumin as a crosslinker

Contamination of food products by spoilage and pathogenic microorganisms during post process handling is one of the major causes for food spoilage and food borne illnesses. The present green sustainable approach describes the covalent immobilization of papain to LDPE (low density polyethylene), HDPE (high density polyethylene), LLDPE (linear low density polyethylene) and PCL (polycaprolactam) with curcumin as the photocrosslinker. About 50% of curcumin and 82-92% of papain were successfully immobilized on these polymers. After 30 days, the free enzyme retained 87% of its original activity, while the immobilized enzyme retained more than 90% of its activity on these polymers. Papain crosslinked to LLDPE exhibited the best antibiofilm properties against Acinetobacter sp. KC119137.1 and Staphylococcus aureus NCIM 5021 when compared to the other three polymers, because of the highest amount of enzyme immobilized on this surface. Papain acts by damaging the cell membrane. The enzyme is able to reduce the amount of carbohydrate and protein contents in the biofilms formed by these organisms. Meat wrapped with the modified LDPE and stored at 4°C showed 9 log reduction of these organisms at the end of the seventh day when compared to samples wrapped with the bare polymer. This method of crosslinking can be used on polymers with or without functional groups and can be adopted to bind any type of antimicrobial agent.

The use of plasma-activated covalent attachment of early domains of tropoelastin to enhance vascular compatibility of surfaces

All current metallic vascular prostheses, including stents, exhibit suboptimal biocompatibility. Improving the re-endothelialization and reducing the thrombogenicity of these devices would substantially improve their clinical efficacy. Tropoelastin (TE), the soluble precursor of elastin, mediates favorable endothelial cell interactions while having low thrombogenicity. Here we show that constructs of TE corresponding to the first 10 ("N10") and first 18 ("N18") N-terminal domains of the molecule facilitate endothelial cell attachment and proliferation equivalent to the performance of full-length TE. This N-terminal ability contrasts with the known role of the C-terminus of TE in facilitating cell attachment, particularly of fibroblasts. When immobilized on a plasma-activated coating ("PAC"), N10 and N18 retained their bioactivity and endothelial cell interactive properties, demonstrating attachment and proliferation equivalent to full-length TE. In whole blood assays, both N10 and N18 maintained the low thrombogenicity of PAC. Furthermore, these N-terminal constructs displayed far greater resistance to protease degradation by blood serine proteases kallikrein and thrombin than did full-length TE. When immobilized onto a PAC surface, these shorter constructs form a modified metal interface to establish a platform technology for biologically compatible, implantable cardiovascular devices.