Effectiveness of dentin pre-treatment on bond strength of two self-adhesive resin cements compared to an etch-and-rinse system: an in vitro study

The effect of ascorbic acid, QMix and other conditioning solutions on the bond strength of adhesively luted glass fiber-reinforced composite posts to root dentin, a laboratory study

PURPOSE

This study was designed to investigate the effect of post space conditioning with different solutions on the bond strength of glass FRC posts and evaluate the mode of resin failure.

METHODS

Sixty extracted human single rooted teeth were root filled using a resin sealer and suitable gutta-percha cones. Post spaces were prepared, and the teeth randomly allocated into 5 groups according to their irrigation regimens which included the following solutions: 17 % EDTA, 2 % CHX, 3 % NaOCl, 10 % ascorbic acid and QMix solutions. Post spaces were irrigated with 5 ml of the solution for 15 s and subsequently washed with distilled water and dried with paper points. Glass FRC posts were cemented into their spaces using a self-adhesive resin cement. The specimens were mounted in plexiglass molds using autopolymerizing acrylic resin. A universal testing machine was used to measure post retention at a crosshead speed of 2 mm/min. The results were analyzed by one-way ANOVA followed by Tukey HSD test (α = 0.05). Dislodged posts and post spaces were examined microscopically to evaluate retention failure.

RESULTS

The Ascorbic acid group exhibited the highest mean retentive strength value at 229 N, followed by QMix at 198 N, NaOCl at 186 N, CHX at 170 N, and EDTA at 124 N. The mean value of the ascorbic acid group was significantly higher than EDTA group, p = 0.012. The failure category was primarily mixed.

CONCLUSIONS

Rinsing post spaces with ascorbic acid exhibited significantly superior bond strength. The failure mode was mixed.

CLINICAL SIGNIFICANCE

Irrigating post spaces with ascorbic acid solution before luting FRC posts significantly improves their bond strength compared to irrigation with EDTA solution. Irrigation with QMix solution produced the second highest retentive strength but showed no statistical significance when compared to using ascorbic acid, NaOCl, CHX, or EDTA solutions.

Influence of Battery Levels in Cordless LED Light-curing Units on Properties of Resin Cement and Glass Fiber Post Retention

PURPOSE

This study aimed to assess the impact of battery levels in single-peak and multi-peak light-curing units (LCUs) on irradiance, and their effects on glass fiber post push-out bond strength to root dentin and the degree of conversion of dual-cure universal resin cement.

METHODS AND MATERIALS

Sixty bovine roots underwent endodontic treatment and were randomly distributed into 6 groups (n=10), formed by combining two LCUs (single-peak and multipeak) and three battery levels (100%, 50%, and 10%). A spectrophotometer measured irradiance (mW/ cm2) and spectral irradiance (mW/cm2/nm). Push-out bond strength (PBS) tests occurred at three root regions (cervical, middle, and apical), with optical and scanning electron microscopy for failure mode analysis. Degree of conversion (DC) was evaluated across the root regions. Data were analyzed using two-way repeated measures ANOVA and the Tukey HSD test. The Fisher exact test verified failure modes (α=0.05).

RESULTS

As multipeak LCU battery levels decreased, emitted irradiance also diminished, with notable PBS reductions in the apical thirds. Failure modes were influenced by different conditions, primarily exhibiting mixed modes. Battery levels significantly impacted DC in the multipeak LCU, particularly in the cervical region, while the single-peak LCU exhibited DC reduction at the 10% battery level in the cervical region.

CONCLUSIONS

Emitted irradiance, resin cement DC, and glass fiber post bond strength to root dentin may be influenced by varying cordless LCUs and battery levels.

Clinical performance and wear resistance of milled resin composite material versus direct nanohybrid bulk-fill resin composite in the restoration of endodontically treated posterior teeth over 1 year: Randomized clinical trial

Context

The restorative complexities associated with endodontically treated teeth surpass those encountered with vital ones. The field of adhesive dentistry experienced a significant advancement that led to a shift in treatment approach toward bonded restorations.

Aim

The aim of the study was to assess the clinical performance of using indirect Milled composite or direct bulk-fill resin composite restorations for endo-treated teeth, as well as to measure the amount of wear on the occlusal tables of both restorations using a digital scanner.

Subjects and Methods

Participants were divided into two groups, where R1 represents the endodontically treated teeth restored with Milled composite, R2 represents the endodontically treated teeth restored with direct bulk-fill composite where 13 patients in each group were treated with a total number of 26 restorations in all patients. Where each restoration was assessed immediately at baseline (T0), 6 months (T6), and 12 months (T12) using the modified United States Public Health Service criteria. Moreover, wear was measured immediately at (T0) and (T12) intraorally and extraorally using intraoral scanners and three-dimensional surface-based superimposition software.

Statistical Analysis Used

Chi-squared test, Mann-Whitney U-test, Friedman's test, Nemenyi post hoc test, Shapiro-Wilk test, paired t-tests, intraclass correlation coefficient.

Results

At all intervals, the majority of the cases in both groups had an alpha score. Some cases exhibited bravo scores in both groups at T6 and T12 regarding the color match, marginal adaptation, marginal discoloration, and marginal integrity without statistically significant difference (P > 0.05). Direct nanohybrid bulk-fill resin composite showed a greater amount of wear without a statistically significant difference (P > 0.05). Extraoral measurement was significantly higher than intraoral measurement (P < 0.001). There was no significant reliability/agreement between both methods.

Conclusions

Both milled composite and direct bulk-fill resin composite restorations in endodontically treated teeth demonstrated appropriate clinical performance and minimal wear over an 1-year follow-up period.

Effects of carbodiimide combined with ethanol-wet bonding pretreatment on dentin bonding properties: an in vitro study

Purpose

This study evaluated the combined effects of Carbodiimide (EDC) and ethanol-wet bonding (EWB) pretreatment on the bond strength and resin-dentin surface.

Methods

Phosphoric acid-etched dentin specimens were randomly divided into five groups based on the following pretreatments: deionized water (control), EWB, 0.3M EDC in water (EDCw), EDC water solution combined EWB (EDCw + EWB), and 0.3M EDC in ethanol (EDCe). A scanning electron microscope (SEM) was used to observe the morphology of collagen fibrils on the demineralized dentin matrix in each group after pretreatment. The adhesives Prime & Bond NT (PB) (Dentsply De trey, Konstanz, Germany) or Single bond 2 (SB) (3M ESPE, St. Paul, MN, USA) was applied after pretreatments, and a confocal laser scanning microscope (CLSM) was used to evaluate the quality of resin tags. The degree of conversion (DC) of the adhesive was investigated by Fourier transform infrared spectroscopy (ATR-FTIR). The dentin was first bonded with resin and bathed in water at 37 °C for 24 h. Half of them were subjected to 10, 000 cycles in a thermocycler between 5 °C and 55 °C before a microshear bond strength (µSBS) test. The statistical methods were Analysis of Variance (ANOVA) and a Tukey post hoc test at α = 0.05.

Results

The µSBS was significantly affected by pretreatments (p < 0.001), adhesives (p < 0.001), and aging conditions (p < 0.001) as revealed by the three-way ANOVA. The EDCw, EDCw + EWB, and EDCe groups significantly increased the µSBS; the EDCw + EWB and EDCe groups produced the highest µSBS. In the EDC-containing groups, the SEM showed at the collagen fibrils in the dentin matrix formed a three-dimensional network structure in the tubules after cross-linking into sheets, and the hybrid layer formed thicker resin tags under a CLSM. In the EDC-containing groups, the CLSM observed an increase in the length of resin tags. PB showed a higher DC and bonding strength than SB, and the five pretreatment groups tested did not affect the DC of the two adhesives.

Conclusions

In etch-and-rinse bonding system, EDC combined with EWB pretreatment can improve the quality of the hybrid layer and enhance the mechanical properties of demineralized dentin matrix. Pretreatment with EDC-ethanol solution may be a new clinically friendly option for enhancing dentin bonding durability.

Survival of Prosthodontic Restorations Luted with Resin-Based versus Composite-Based Cements: Retrospective Cohort Study

The purpose of this study was to evaluate clinical performance, survival, and complications of indirect composite inlays, onlays, and overlays on posterior teeth. Digital records of 282 patients treated between 2014 and 2018 were accessed and analyzed retrospectively. The included patients received 469 composite restorations luted with seven different resin-based types of cement, i.e., Filtek Ultimate Flow, Enamel Plus, Relyx Ultimate, Harvard Premium Flow, Relyx Unicem, Filtek Bulk Fill Flowable, and Filtek Ultimate. The restorations had been clinically and radiographically evaluated annually. The mechanical and clinical complications, e.g., debonding, fracture, and secondary caries, were evaluated and recorded. The examined restorations exhibited a high survival rate (84.9%), and failure was found in only 71 cases. Fracture was the most common cause (n = 36), followed by prosthetic work release (n = 19) and secondary caries (n = 16). There was a statistically significant difference between failure and cement material (Sig. < 0.001); the composite-based cements (87.2%) had a high survival rate compared to the resin-based cement (72.7%). Similarly, the cements with high viscosity (90.2%) had significantly higher survival rates than the low-viscosity cements (78.9%). Moreover, onlays showed higher longevity compared to overlays (Sig. = 0.007), and patients aged under 55 years showed less complications (Sig. = 0.036). Indirect composite restoration was a successful solution to tooth structure loss. The material of the cementation is an important part of the success. Higher survival rate was found in our study when the fixation materials with high viscosity were used, thus suggesting using these materials with indirect restorations. Composite-based cements had significantly higher survival rate than resin-based cements.