Three-dimensional facial development of children with unilateral cleft lip and palate during the first year of life in comparison with normative average faces

Longitudinal Three-Dimensional Stereophotogrammetric Growth Analysis in Infants with Unilateral Cleft Lip and Palate from 3 to 12 Months of Age

This longitudinal study aimed to evaluate facial growth and soft tissue changes in infants with complete unilateral cleft lip, alveolus, and palate (CUCLAP) at ages 3, 9, and 12 months. Using 3D images of 22 CUCLAP infants, average faces and distance maps for the entire face and specific regions were created. Color-coded maps highlighted more significant soft tissue changes from 3 to 9 months than from 9 to 12 months. The first interval showed substantial growth in the entire face, particularly in the forehead, eyes, lower lip, chin, and cheeks (p < 0.001), while the second interval exhibited no significant growth. This study provides insights into facial soft tissue growth in CUCLAP infants during critical developmental stages, emphasizing substantial improvements between 3 and 9 months, mainly in the chin, lower lip, and forehead. However, uneven growth occurred in the upper lip, philtrum, and nostrils throughout both intervals, with an overall decline in growth from 9 to 12 months. These findings underscore the dynamic nature of soft tissue growth in CUCLAP patients, highlighting the need to consider these patterns in treatment planning. Future research should explore the underlying factors and develop customized treatment interventions for enhanced facial aesthetics and function in this population.

Growth patterns of the nasolabial region following unilateral cleft lip primary repair

Surgical correction is the optimal way of repairing a congenital cleft lip. Patients with this condition often undergo initial surgical treatment at an early age and achieve an acceptable outcome. However, their levels of satisfaction will decrease in later stages of life as facial growth and development will inevitably cause changes in long-term outcomes, especially in the nasolabial region. Therefore, it is important for surgeons to understand nasolabial development after primary treatment and tailor their surgical techniques appropriately. This review focuses on the growth patterns of the nasolabial region after primary repair, so as to provide references for operative strategy.

The Vectra M3 3-dimensional digital stereophotogrammetry system: A reliable technique for detecting chin asymmetry

Purpose

The aim of this study was to evaluate the reliability of the Vectra M3 (3D Imaging System; Canfield Scientific, Parsippany, NJ, USA) in detecting chin asymmetry, and to assess whether the automatic markerless tracking function is reliable compared to manually plotting landmarks.

Materials and Methods

Twenty subjects (18 females and 2 males) with a mean age of 42.5±10.5 years were included. Three-dimensional image acquisition was carried out on all subjects with simulated chin deviation in 4 stages (1-4 mm). The images were analyzed by 2 independent observers through manually plotting landmarks and by Vectra software auto-tracking mode. Repeated-measures analysis of variance and the Tukey post-hoc test were performed to evaluate the differences in mean measurements between the 2 operators and the software for measuring chin deviation in 4 stages. The intraclass correlation coefficient (ICC) was calculated to estimate the intra- and inter-examiner reliability.

Results

No significant difference was found between the accuracy of manually plotting landmarks between observers 1 and 2 and the auto-tracking mode (P=0.783 and P=0.999, respectively). The mean difference in detecting the degree of deviation according to the stage was <0.5 mm for all landmarks.

Conclusion

The auto-tracking mode could be considered as reliable as manually plotted landmarks in detecting small chin deviations with the Vectra® M3. The effect on the soft tissue when constructing a known dental movement yielded a small overestimation of the soft tissue movement compared to the dental movement (mean value<0.5 mm), which can be considered clinically non-significant.

Correlation between alveolar cleft volume and alveolar bone quality in patients with unilateral cleft lip and palate: A cone-beam computed tomography study

OBJECTIVES

This study aimed to determine the correlation between alveolar cleft volume and fenestration and dehiscence in the adjacent alveolar bone in patients with unilateral cleft lip and palate (UCLP) using cone-beam computed tomography (CBCT) sections.

MATERIALS AND METHODS

In this descriptive, cross-sectional study, CBCT scans of 68 non-syndromic patients with UCLP aged between 6 and14 years were selected. All patients were treated in Iran and had undergone lip and palate repair surgery within the first 3 to 18 months after birth. CBCT scans had been taken after orthodontic expansion and prior to alveolar bone grafting surgery. Cleft volume, fenestration and dehiscence were assessed using Mimics software. Data were analyzed using independent t-test, Kruskal-Wallis test, Spearman's correlation coefficient and logistic regression model.

RESULTS

The mean alveolar cleft volume was 628.66±172.84 mm³. There was a significant negative correlation between cleft volume and fenestration (P<0.001). Also, there was a significant positive correlation between cleft volume and dehiscence (P<0.001) in the adjacent bone.

CONCLUSION

The Mimics software can be successfully used to estimate the cleft volume prior to surgical procedures in UCLP patients. The results suggest that the alveolar cleft volume can be used as an aid to assess the periodontal condition of adjacent teeth. The cleft volume has a negative and positive correlation with fenestration and dehiscence respectively.

Superior Orbicularis Oris Muscle Activity in Children Surgically Treated for Bilateral Complete Cleft Lip and Palate

The aim of this cross-sectional study was to evaluate the electromyographic activity of the superior orbicularis oris muscle both in children surgically treated for bilateral complete cleft lip and palate (BCCLP) as well as in subjects without BCCLP. The study comprised 77 children aged 6.6 to 12.5 years. All the patients with clefts had previously undergone lip and palate surgery. The upper lip electromyographic (EMG) assessments were made with a DAB-Bluetooth device (Zebris Medical GmbH, Germany) at rest, while swallowing saliva, protruding lips and compressing lips. EMG measurements were also made when the subjects produced phonemes /p/, /b/, and /m/ with the vowel /a/. The Mann-Whitney U test was applied to statistically analyze the EMG values. Significantly higher median upper lip EMG activity under working conditions such as swallowing saliva, lip compression, and production of the phoneme /p/ with the vowel /a/ was observed in patients with BCCLP compared to those without a cleft. The results of the study showed that the upper lip muscle activity increases in children with BCCLP when swallowing saliva, compressing lips and during some speech movement tasks. This may be important in the aspect of the effect of surgical lip repair on the craniofacial growth.

Voxel-based superimposition of serial craniofacial cone-beam computed tomographies for facial soft tissue assessment: Reproducibility and segmentation effects

INTRODUCTION

The aim of this investigation was to evaluate the reproducibility of a voxel-based 3-dimensional superimposition method and the effect of segmentation error on determining soft tissue surface changes.

METHODS

A total of 15 pairs of serial cone-beam computed tomography images (interval: 1.69 ± 0.37 years) from growing subjects (initial age: 11.75 ± 0.59 years) were selected from an existing digital database. Each pair was superimposed on the anterior cranial base, in 3 dimensions with Dolphin 3D software (version 2.1.6079.17633; Dolphin Imaging & Management Solutions, Chatsworth, Calif). The reproducibility of superimposition outcomes and surface segmentation were tested with intra- and interoperator comparisons.

RESULTS

Median differences in inter- and intrarater measurements at various areas presented a range of 0.08-0.21 mm. In few instances, the differences were larger than 0.5 mm. In areas where T0-T1 changes were increased, the error did not appear to increase. However, the method error increased the farther the measurement area was from the superimposition reference structure. For individual images, the median soft tissue segmentation error ranged from 0.05 to 0.06 at various areas and in no subject exceeded 0.13 mm.

CONCLUSIONS

The presented voxel-based superimposition method was efficient and well reproducible. The segmentation process was a minimal source of error; however, there were a few cases in which the total error was more than 0.5 mm and could be considered clinically significant. Therefore, this method can be used clinically to assess 3-dimensional soft tissue changes during orthodontic treatment in growing patients.

Frontal and Axial Evaluation of Craniofacial Morphology in Repaired Unilateral Cleft Lip and Palate Patients Utilizing Cone Beam Computed Tomography; An Observational Study

The current study was conducted to assess the extent of maxillary arch collapse on the cleft vis-a-vis non-cleft sides in the same individual presenting withunilateral cleft lip and palate (UCLP), using cone-beam computed tomography (CBCT). Thirty-one children (eighteen boys andthirteen girls) with surgically repaired UCLP, who met the inclusion criteria, were selected. Following the acquisition of CBCT scans, fourteen bilateral landmarks were selected. The distance of the bilateral landmark was calculated from the midsagittal plane on the cleft and non-cleft sides for both frontal and axial views. Tracings were done;the data obtained was subjected to statistical analysis;and intra-observer variability was checked with intraclass correlation coefficient (ICC) and two-way ANOVA. Subsequently, the measurements were subjected to paired t-tests at the 95% level of significance with Bonferroni correction. A significant reduction of pyriforme and an alveolar crest above the maxillary 1st molar were discerned in frontal analysis on the cleft side. In the axial view, the zygomatic arch, malar, porion and alveolar crest at the molar region were non-significant, but the alveolar crest at the premolar region (p < 0.004)) was significantly decreased. In the frontal analysis, pyriforme and the alveolar crest above the maxillary 1st molar, and, in the axial view, premolar widths, showed significant reduction when comparing the cleft vis-a-vis non-cleft sides.

Surface Electromyography as a Method for Diagnosing Muscle Function in Patients with Congenital Maxillofacial Abnormalities

Electromyography (EMG) is the most objective and reliable method available for imaging muscle function and efficiency, which is done by identifying their electrical potentials. In global surface electromyography (sEMG), surface electrodes are located on the surface of the skin, and it detects superimposed motor unit action potentials from many muscle fibers. sEMG is widely used in orthodontics and maxillofacial orthopaedics to diagnose and treat temporomandibular disorders (TMD) in patients, assess stomatognathic system dysfunctions in patients with malocclusions, and monitor orthodontic therapies. Information regarding muscle sEMG activity in subjects with congenital maxillofacial abnormalities is limited. For this reason, the aim of this review is to discuss the usefulness of surface electromyography as a method for diagnosing muscle function in patients with congenital malformations of the maxillofacial region. Original papers on this subject, published in English between 1995 until 2020, are located in the MEDLINE/PubMed database.

Assessment of Masticatory Muscle Function in Patients with Bilateral Complete Cleft Lip and Palate and Posterior Crossbite by means of Electromyography

Aim

The aim of this study was to evaluate the electrical activity of the masticatory muscles in children with a bilateral complete cleft lip and palate (BCCLP) and posterior crossbite as well as in noncleft subjects with no malocclusion. Another purpose of the study was to examine the possible factors associated with this muscle activity.

Methods

The study included 52 children with mixed dentition and Class I occlusions (20 patients with nonsyndromic BCCLP and 32 subjects with no clefts). All the cleft patients had posterior crossbite. The surface electromyography (sEMG) was used to identify the electrical potentials of the temporalis and masseter muscles. The electromyographical (EMG) recordings were taken with a DAB-Bluetooth Instrument (zebris Medical GmbH, Germany) at rest and during maximum voluntary clenching (MVC). The relationships between muscle EMG activity and independent variables were identified through multivariate logistic regression analysis.

Results

The EMG activity of the temporalis muscles at rest was significantly higher in BCCLP patients with malocclusion in comparison with the noncleft subjects with normal occlusion. During MVC, significantly lower electrical potentials of the temporalis and masseter muscles were observed in cleft patients compared to the noncleft group. The presence of BCCLP, unilateral posterior crossbites, increased vertical overlap, and increased overjet are factors strongly associated with higher temporalis muscle EMG activity at rest.

Conclusion

The use of surface electromyography in imaging muscle function showed that children with BCCLP and posterior crossbite exhibited altered masticatory muscle potentials at rest and during clenching. The presence of unilateral posterior crossbites, increased vertical overlap, and increased overjet had a significant impact on temporalis muscle activity in cleft patients. This knowledge is important in the aspect of early and proper diagnosis and orthodontic treatment of malocclusions, thereby achieving correct occlusion and improvement in muscle function.