A Data-Driven Model with Feedback Calibration Embedded Blood Pressure Estimator Using Reflective Photoplethysmography

Ambulatory blood pressure (BP) monitoring (ABPM) is vital for screening cardiovascular activity. The American College of Cardiology/American Heart Association guideline for the prevention, detection, evaluation, and management of BP in adults recommends measuring BP outside the office setting using daytime ABPM. The recommendation to use night-day BP measurements to confirm hypertension is consistent with the recommendation of several other guidelines. In recent studies, ABPM was used to measure BP at regular intervals, and it reduces the effect of the environment on BP. Out-of-office measurements are highly recommended by almost all hypertension organizations. However, traditional ABPM devices based on the oscillometric technique usually interrupt sleep. For all-day ABPM purposes, a photoplethysmography (PPG)-based wrist-type device has been developed as a convenient tool. This optical, noninvasive device estimates BP using morphological characteristics from PPG waveforms. As measurement can be affected by multiple variables, calibration is necessary to ensure that the calculated BP values are accurate. However, few studies focused on adaptive calibration. A novel adaptive calibration model, which is data-driven and embedded in a wearable device, was proposed. The features from a 15 s PPG waveform and personal information were input for estimation of BP values and our data-driven calibration model. The model had a feedback calibration process using the exponential Gaussian process regression method to calibrate BP values and avoid inter- and intra-subject variability, ensuring accuracy in long-term ABPM. The estimation error of BP (ΔBP = actual BP-estimated BP) of systolic BP was -0.1776 ± 4.7361 mmHg; ≤15 mmHg, 99.225%, and of diastolic BP was -0.3846 ± 6.3688 mmHg; ≤15 mmHg, 98.191%. The success rate was improved, and the results corresponded to the Association for the Advancement of Medical Instrumentation standard and British Hypertension Society Grading criteria for medical regulation. Using machine learning with a feedback calibration model could be used to assess ABPM for clinical purposes.

A clinical set-up for noninvasive blood pressure monitoring using two photoplethysmograms and based on convolutional neural networks

Blood pressure is a reliable indicator of many cardiac arrhythmias and rheological problems. This study proposes a clinical set-up using conventional monitoring systems to estimate systolic and diastolic blood pressures continuously based on two photoplethysmogram signals (PPG) taken from the earlobe and toe. Several amendments were applied to conventional clinical monitoring devices to construct our project plan. We used two monitors to acquire two PPGs, one ECG, and invasive blood pressure as the reference to evaluate the estimation accuracy. One of the most critical requirements was the synchronization of the acquired signals that was accomplished by using ECG as the time reference. Following data acquisition and preparation procedures, the performance of each PPG signal alone and together was investigated using deep convolutional neural networks. The proposed architecture was evaluated on 32 records acquired from 14 patients after cardiovascular surgery. The results showed a better performance for toe PPG in comparison with earlobe PPG. Moreover, they indicated the algorithm accuracy improves if both signals are applied together to the network. According to the British Hypertension Society standards, the results achieved grade A for both blood pressure measurements. The mean and standard deviation of estimation errors were +0.3 ± 4.9 and +0.1 ± 3.2 mmHg for systolic and diastolic BPs, respectively. Since the method is based on conventional monitoring equipment and provides a high estimation consistency, it can be considered as a possible alternative for inconvenient invasive BP monitoring in clinical environments.

Continuous Blood Pressure Monitoring as a Basis for Ambient Assisted Living (AAL) - Review of Methodologies and Devices

Blood pressure (BP) is a bio-physiological signal that can provide very useful information regarding human's general health. High or low blood pressure or its rapid fluctuations can be associated to various diseases or conditions. Nowadays, high blood pressure is considered to be an important health risk factor and major cause of various health problems worldwide. High blood pressure may precede serious heart diseases, stroke and kidney failure. Accurate blood pressure measurement and monitoring plays fundamental role in diagnosis, prevention and treatment of these diseases. Blood pressure is usually measured in the hospitals, as a part of a standard medical routine. However, there is an increasing demand for methodologies, systems as well as accurate and unobtrusive devices that will permit continuous blood pressure measurement and monitoring for a wide variety of patients, allowing them to perform their daily activities without any disturbance. Technological advancements in the last decade have created opportunities for using various devices as a part of ambient assisted living for improving quality of life for people in their natural environment. The main goal of this paper is to provide a comprehensive review of various methodologies for continuous cuff-less blood pressure measurement, as well as to evidence recently developed devices and systems for continuous blood pressure measurement that can be used in ambient assisted living applications.